CGC. Allan Guymon

C. Allan Guymon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


C. Allan Guymon has a total of 101 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of Block Copolymer Composition and Architecture on Phase Separation and Thermomechanical Properties of Epoxy Composites

    by Tanner L. Grover, Jennafer M. Davis, Lars Nelson, Douglas R. Tree, C. Allan Guymon

    Inducing phase separation in crosslinked polymer systems with high-molecular-weight block copolymers (BCP) has been shown to produce composites with enhanced tensile properties and unique thermomechanical behavior. However, detailed understanding of the relationships between BCP chemical composition and physical interactions within the polymerizing matrix is limited. In this work, amphiphilic reactive BCPs were synthesized and incorporated into a cationic photopolymerizable epoxy resin to study the effect of BCP architecture on phase-separated structure and bulk material properties. We prepared the BCPs using photoiniferter polymerization to control and vary block chemical composition, block volume fraction, and hydroxyl functionality of poly(methyl acrylate-block-hydroxyethyl acrylate) (PMA-b-PHEA) and poly(butyl acrylate-block-hydroxyethyl acrylate) (PBA-b-PHEA) copolymers. Self-consistent field theory simulations predicted, and AFM measurements confirmed, that the PMA-based BCPs had smaller domain sizes upon microphase separation—a result of the greater miscibility between the PMA and PHEA blocks—leading to a 200% increase in the tensile strength and material toughness compared to the PBA-based system. Furthermore, the extent of phase separation (and thus the thermomechanical properties) could be controlled by varying the relative MA/BA composition in the nonreactive BCP segment. Additionally, we varied the density of OH pendant groups to investigate the role of hydrogen bonding and network connectivity on resin rheology, microstructure, and cured mechanical properties. This work provides structure–property relationships and links BCP composition to phase-separated structure for improving properties of photocured materials.

  • Photografted Dual-Network Zwitterionic Hydrogel Coatings for Biomaterials

    by George Barrera, Anne Wu, Adreann Peel, Naomi Elmer, Kameron R. Hansen, Linjing Xu, Marlan R. Hansen, C. Allan Guymon

    Reduction of foreign body response and fibrotic capsule formation with implanted biomaterials can significantly improve the lifetime and function of medical devices, including those that deliver electrical stimulation such as cochlear implants. Zwitterionic hydrogels resist biofouling but may lack the mechanical strength and stability necessary for long-term applications. In this study, we have developed durable and robust antifouling dual-network zwitterionic coatings covalently bonded to poly(dimethylsiloxane) (PDMS). These dual-network hydrogels are formed using photografting and photopolymerization of a primary network, followed by swelling and photopolymerization of a secondary monomer system, thereby enhancing the strength and durability of the coating. For example, the material stiffness increases slightly with lightly to moderately crosslinked secondary networks, while higher coating strength results from a highly crosslinked secondary network. The introduction of a secondary network also enables control of swelling and ultimate thickness with up to threefold reductions in swelling for hydrogels with lower crosslink density. As with single-network hydrogels, dual-network coatings demonstrate high flexibility and a low coefficient of friction. Additionally, dual-network hydrogel coatings reduce fibroblast adhesion compared to PDMS in vitro with large decreases in fibrotic capsule thickness in vivo. These results illustrate the potential of dual-network coatings as an effective strategy for improving the long-term performance of implanted biomaterials by reducing biofouling and controlling material properties of the photografted hydrogel.

  • Tuning spectral response and polymerization control in nitroxide-mediated photopolymerization (NMP 2 ) initiators via chromophore substitution

    by Huayang Fang, Jennafer M. Davis, Andrew Chappell, Jon P. Scholte, C. Allan Guymon

    Light-induced NMP 2 initiators reversibly activate-deactivate carbon radicals, enabling pseudo-first order hexyl acrylate polymerization with up to 9-fold molecular weight enhancement.

  • Monitoring bulk acrylate-methacrylate photopolymerization reaction kinetics using in situ NMR

    by Luis L. Jessen, Naomi Elmer, George Crull, Kameron R. Hansen, C. Allan Guymon


  • Synthesis and Functionalization of Cross-Linking Macroinimers for Photocurable Systems

    by Luis L. Jessen, Tanner L. Grover, Dean Afsar, Erion Hasa, Patricia R. Calvo, C. Allan Guymon

  • Open Access

    Enhancing the Thermomechanical Properties of Photopolymer Networks Using Small-Molecular-Weight Hyperbranched Prepolymer Additives

    by Luis L. Jessen, Tanner L. Grover, Nicholas V. Oberbroeckling, Robin Willemse, C. Allan Guymon


  • Open Access

    Effect of Block Copolymer Self-Assembly on Phase Separation in Photopolymerizable Epoxy Blends

    by Tanner L. Grover, C. Allan Guymon

    Directing self-assembly of photopolymerizable systems is advantageous for controlling polymer nanostructure and material properties, but developing techniques for inducing ordered structure remains challenging. In this work, well-defined diblock or random copolymers were incorporated into cationic photopolymerizable epoxy systems to investigate the impact of copolymer architecture on self-assembly and phase separated nanostructures. Copolymers consisting of poly(hydroxyethyl acrylate)-x-(butyl acrylate) were prepared using photoiniferter polymerization to control functional group placement and molecular weight/polydispersity. Prepolymer configuration and concentration induced distinctly different effects on the resin flow and photopolymerization kinetics. The diblock copolymer self-assembled into nanostructured phases within the resin matrix, whereas the random copolymer formed an isotropic mixture. Rapid photopolymerization and ambient temperature conditions during cure facilitated retention of the self-assembled phases, leading to considerably different composite morphology and thermomechanical behavior. Increased loading of the diblock copolymer induced long-range ordered cocontinuous structures. Even with nearly identical prepolymer composition, controlled nanophase separation resulted in significantly enhanced tensile properties relative to those of the isotropic system. This work demonstrates that controlling phase separation with a block copolymer architecture allows access to nanostructured photopolymers with unique and enhanced properties.


  • Open Access

    Photografted Zwitterionic Hydrogel Coating Durability for Reduced Foreign Body Response to Cochlear Implants

    by Adreann Peel, Douglas Bennion, Ryan Horne, Marlan R. Hansen, C. Allan Guymon

    The durability of photografted zwitterionic hydrogel coatings on cochlear implant biomaterials was examined to determine the viability of these antifouling surfaces during insertion and long-term implant usage. Tribometry was used to determine the effect of zwitterionic coatings on the lubricity of surfaces with varying hydration levels, applied normal force, and time frame. Additionally, flexural resistance was investigated using mandrel bending. Ex vivo durability was assessed by determining the coefficient of friction between tissues and treated surfaces. Furthermore, cochlear implantation force was measured using cadaveric human cochleae. Hydrated zwitterionic hydrogel coatings reduced frictional resistance approximately 20-fold compared to uncoated PDMS, which led to significantly lower mean force experienced by coated cochlear implants during insertion compared to uncoated systems. Under flexural force, zwitterionic films resisted failure for up to 60 min of desiccation. The large increase in lubricity was maintained for 20 h under continual force while hydrated. For loosely cross-linked systems, films remained stable and lubricious even after rehydration following complete drying. All coatings remained hydrated and functional under frictional force for at least 30 min in ambient conditions allowing drying, with lower cross-link densities showing the greatest longevity. Moreover, photografted zwitterionic hydrogel samples showed no evidence of degradation and nearly identical lubricity before and after implantation. This work demonstrates that photografted zwitterionic hydrogel coatings are sufficiently durable to maintain viability before, during, and after implantation. Mechanical properties, including greatly increased lubricity, are preserved after complete drying and rehydration for various applied forces. Additionally, this significantly enhanced lubricity translates to significantly decreased force during insertion of implants which should result in less trauma and scarring.


  • Open Access

    The geometry of photopolymerized topography influences neurite pathfinding by directing growth cone morphology and migration

    by Joseph T Vecchi, Madeline Rhomberg, C Allan Guymon, Marlan R Hansen

    Objective. Cochlear implants provide auditory perception to those with severe to profound sensorineural hearing loss: however, the quality of sound perceived by users does not approximate natural hearing. This limitation is due in part to the large physical gap between the stimulating electrodes and their target neurons. Therefore, directing the controlled outgrowth of processes from spiral ganglion neurons (SGNs) into close proximity to the electrode array could provide significantly increased hearing function. Approach. For this objective to be properly designed and implemented, the ability and limits of SGN neurites to be guided must first be determined. In this work, we engineer precise topographical microfeatures with angle turn challenges of various geometries to study SGN pathfinding and use live imaging to better understand how neurite growth is guided by these cues. Main Results. We find that the geometry of the angled microfeatures determines the ability of neurites to navigate the angled microfeature turns. SGN neurite pathfinding fidelity is increased by 20%–70% through minor increases in microfeature amplitude (depth) and by 25% if the angle of the patterned turn is made obtuse. Further, we see that dorsal root ganglion neuron growth cones change their morphology and migration to become more elongated within microfeatures. Our observations also indicate complexities in studying neurite turning. First, as the growth cone pathfinds in response to the various cues, the associated neurite often reorients across the angle topographical microfeatures. Additionally, neurite branching is observed in response to topographical guidance cues, most frequently when turning decisions are most uncertain. Significance. Overall, the multi-angle channel micropatterned substrate is a versatile and efficient system to assess neurite turning and pathfinding in response to topographical cues. These findings represent fundamental principles of neurite pathfinding that will be essential to consider for the design of 3D systems aiming to guide neurite growth in vivo.


  • Open Access

    Influence of Ionic Liquid and Light Intensity on a Polymer Nanostructure Formed in Lyotropic Liquid Crystalline Templates

    by Alexandros Kotsiras, John Whitley, Esmeralda Orozco, C. Allan Guymon

    Utilizing self-assembled lyotropic liquid crystal (LLC) templates with radical photopolymerization shows promise in controlling polymer structure on the nanometer scale This control of nanostructure allows tailoring and enhancement of material properties not attainable in traditional polymerization in applications including hydrogels and stimuli-responsive systems. However, thermodynamically driven phase separation between the polymer and LLC templates often hinders the control of local polymer order and resultant polymer properties. This study investigates an alternative method to control the hydrogel nanostructure and avoid phase separation using imidazolium ionic liquids (ILs) in the LLC template while modulating the light intensity used in photopolymerization. The addition of the IL improves the thermodynamic stability and enhances the polymerization rate in the LLC system. The degree of LLC nanostructure retention is increased by increasing light intensities during polymerization. In addition, intermediate concentrations of cross-linker allow a balance between phase stability and cross-linking to lock in LLC morphology. With enhanced retention, the maximum water uptake is significantly higher compared with isotropic controls. These results demonstrate a method to increase the structure on the nanometer scale of a polymer by combining the addition of ILs with the proper selection of light intensity and cross-link density that allows access to unique hydrogel properties. These templated polymers demonstrate enhanced swelling and a stimuli response that show promise in applications ranging from drug delivery to water remediation.