Paulo Roberto Campos Flexa Ribeiro Filho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Paulo Roberto Campos Flexa Ribeiro Filho has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Celio Loureiro Cavalcante
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
6 shared publications - Francisco Murilo Tavares Luna
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
6 shared publications - Leonardo dos Santos e Santos
Graduate Program in Natural Resources Engineering of the Amazon (PRODERNA), Institute of Technology (ITEC), Federal University of Pará (UFPA), Belém 66075-110, Brazil
4 shared publications - Emanuel Negrão Macêdo
Federal University of Para
3 shared publications - Maria Marliete Fernandes de Melo Neta
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
3 shared publications - Matheus Rocha Do Nascimento
Grupo de Pesquisa em Separações por Adsorção, Departamento de Engenharia Química, Universidade Federal do Ceará, Campus do Pici, Bl. 709, Fortaleza 60440-900, CE, Brazil
3 shared publications
Latest Publications
- Open Access
- 7 February 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (2) , 77
Tribological Properties of Biolubricants: A Comprehensive Bibliometric and Trend Analysis
Interest in replacing petroleum-based lubricants with bio-based alternatives is driven by growing demand for lubricants, in contrast to a decreasing supply of products derived from fossil resources, coupled with environmental concerns. Biolubricants offer several advantages over conventional petroleum-based lubricants, such as biodegradability and renewability. Researchers have been seeking solutions for these challenges over the years, employing various approaches, including the use of different raw materials, chemical modifications, and different types of additives. This review evaluates a total of 504 articles published between 2010 and 2025 in the Scopus database, with the help of RStudio, using the bibliometrix package. The objective is to provide an integrated bibliometric and systematic analysis, presenting the research landscape on the tribological properties of biolubricants, which may contribute to the development of novel investigation initiatives in the field. The main thematic trends, researchers, journals, and most active countries and institutions have been evaluated. Additionally, the most cited studies, recent advances and existing gaps are presented and discussed.
- 7 February 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (2) , 77
Open AccessTribological Properties of Biolubricants: A Comprehensive Bibliometric and Trend Analysis
Interest in replacing petroleum-based lubricants with bio-based alternatives is driven by growing demand for lubricants, in contrast to a decreasing supply of products derived from fossil resources, coupled with environmental concerns. Biolubricants offer several advantages over conventional petroleum-based lubricants, such as biodegradability and renewability. Researchers have been seeking solutions for these challenges over the years, employing various approaches, including the use of different raw materials, chemical modifications, and different types of additives. This review evaluates a total of 504 articles published between 2010 and 2025 in the Scopus database, with the help of RStudio, using the bibliometrix package. The objective is to provide an integrated bibliometric and systematic analysis, presenting the research landscape on the tribological properties of biolubricants, which may contribute to the development of novel investigation initiatives in the field. The main thematic trends, researchers, journals, and most active countries and institutions have been evaluated. Additionally, the most cited studies, recent advances and existing gaps are presented and discussed.
- Open Access
A Digitization Framework for Belt Rotation Monitoring in Pipe Conveyor Applications
Pipe conveyors provide an environmentally friendly alternative to open-troughed bulk solids conveyance, particularly for long or complex routing applications. However, the sustainability of this technology is compromised by unstable operations. Complex routing, operational variations, and environmental factors create uneven contact forces, triggering belt rotation. This is a critical failure mode that requires continuous monitoring throughout the conveyor’s lifecycle. Insufficient failure data represents a typical challenge for this application. This study hypothesized technological principles that constitute the minimum requirements for enabling the scaling of industrial applications of belt rotation monitoring. Enabling technologies were adopted to foster innovation, and a physical prototype was implemented to address data scarcity for this failure mode. Using a controller-responder wireless network of ESP32 Industrial Internet of Things devices, we developed a belt-independent measurement system with multiparameter capability. Key criteria for detecting unsafe operational states and a criticality-based approach for determining optimal measuring unit quantities were established. The measurement results demonstrated suitable precision for digitization objectives: overlap angle (3.3107° ± 16.7562°), pipe diameter (+13.3850 ± 7.2114 mm), and overlap length (−26.2750 ± 25.1536 mm), based on 307 samples with a latency of 350.1303 ms. The framework demonstrates potential for industrial deployment with acceptable performance for real-time monitoring.
Open AccessA Digitization Framework for Belt Rotation Monitoring in Pipe Conveyor Applications
Pipe conveyors provide an environmentally friendly alternative to open-troughed bulk solids conveyance, particularly for long or complex routing applications. However, the sustainability of this technology is compromised by unstable operations. Complex routing, operational variations, and environmental factors create uneven contact forces, triggering belt rotation. This is a critical failure mode that requires continuous monitoring throughout the conveyor’s lifecycle. Insufficient failure data represents a typical challenge for this application. This study hypothesized technological principles that constitute the minimum requirements for enabling the scaling of industrial applications of belt rotation monitoring. Enabling technologies were adopted to foster innovation, and a physical prototype was implemented to address data scarcity for this failure mode. Using a controller-responder wireless network of ESP32 Industrial Internet of Things devices, we developed a belt-independent measurement system with multiparameter capability. Key criteria for detecting unsafe operational states and a criticality-based approach for determining optimal measuring unit quantities were established. The measurement results demonstrated suitable precision for digitization objectives: overlap angle (3.3107° ± 16.7562°), pipe diameter (+13.3850 ± 7.2114 mm), and overlap length (−26.2750 ± 25.1536 mm), based on 307 samples with a latency of 350.1303 ms. The framework demonstrates potential for industrial deployment with acceptable performance for real-time monitoring.
- Open Access
- 20 December 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (12) , 459
Tribological Characteristics of Biolubricant Obtained by Transesterification of Grape Seed Oil
Research on and the development of bio-based lubricants as alternatives to mineral-based lubricants have been encouraged worldwide owing to environmental concerns and the possible depletion of oil reserves. This study explored the use of grape seed oil (GSO), a byproduct of wine production, as a raw material for biolubricant synthesis. GSO contains a triglyceride molecule rich in unsaturated fatty acids, which is ideal for obtaining biolubricants. This study addresses the technical challenges of converting GSO into a lubricant by synthesizing methyl esters (FAME) via transesterification with 2-ethylhexanol to produce a biolubricant (BL) sample. The obtained products were characterized using Fourier-transform infrared spectroscopy and nuclear magnetic resonance spectroscopy to confirm the conversion of the molecules. The density, kinematic viscosity, and viscosity index were determined using the parameters established by ASTM. The tribological characteristics of BL were evaluated using a four-ball tribometer configuration. BL exhibited physicochemical characteristics comparable with those of an ISO VG 10 lubricant, a friction coefficient (FC) 40.82% lower than that of a hydrotreated mineral oil sample, and a smoother wear surface. These results indicate that the polarity of the ester functional group was efficient in producing a protective film on metal surfaces.
- 20 December 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (12) , 459
Open AccessTribological Characteristics of Biolubricant Obtained by Transesterification of Grape Seed Oil
Research on and the development of bio-based lubricants as alternatives to mineral-based lubricants have been encouraged worldwide owing to environmental concerns and the possible depletion of oil reserves. This study explored the use of grape seed oil (GSO), a byproduct of wine production, as a raw material for biolubricant synthesis. GSO contains a triglyceride molecule rich in unsaturated fatty acids, which is ideal for obtaining biolubricants. This study addresses the technical challenges of converting GSO into a lubricant by synthesizing methyl esters (FAME) via transesterification with 2-ethylhexanol to produce a biolubricant (BL) sample. The obtained products were characterized using Fourier-transform infrared spectroscopy and nuclear magnetic resonance spectroscopy to confirm the conversion of the molecules. The density, kinematic viscosity, and viscosity index were determined using the parameters established by ASTM. The tribological characteristics of BL were evaluated using a four-ball tribometer configuration. BL exhibited physicochemical characteristics comparable with those of an ISO VG 10 lubricant, a friction coefficient (FC) 40.82% lower than that of a hydrotreated mineral oil sample, and a smoother wear surface. These results indicate that the polarity of the ester functional group was efficient in producing a protective film on metal surfaces.
- Open Access
- 20 July 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (14) , 11312
Belt Rotation in Pipe Conveyors: Failure Mode Analysis and Overlap Stability Assessment
Pipe conveyors provide sustainable solutions for environmentally sensitive or topographically complex powdered and bulk-solid handling processes; however, belt rotation is among the most critical failure modes of these equipment, influencing engineering, operational, and maintenance activities throughout the conveyors’ lifecycles. Position changes in the overlap are mechanical responses to uneven contact forces between the vulcanizing rubber belt and the idler rolls, owing to the highly nonlinear process of the belt folding from a trough to a tubular shape, and no method for quantifying the belt’s stability is currently available. In this study, we analyzed the failure mode of belt rotation and proposed a linearized model of an overlap stability index to evaluate the resilience of the overlap position through a case study of a short-flight curved pipe conveyor. Our proposal considers an interference model between the simulated torque of a curved flight in a pipe conveyor and the calculated torque of its equivalent straight flight by using kernel-smoothed density functions. It is adapted to incorporate adjustment factors for the filling degree based on simulations, the effect of the overlap in the forming force of the belt, the remaining useful life of the belt, and the coefficients of friction between the belt back cover and the idler rolls due to adhesion and hysteresis. An application was developed to calculate the belt’s rotational holding torque and rotary moment by processing real operational data, simulated contact forces, and the relevant equipment parameters. This analysis identified the reduced transverse bending stiffness and increased belt tension forces as the root causes for position changes with a loss of contact in the upper idler rolls of curved flights 10, 13, 15–16, and 17. The contributing factors included spots of augmented contact forces during the initial stages of the belt lifespan in curved flights 15–16, which presented unstable conditions due to increased opening forces, with an OSI of 0.8657. Furthermore, we proposed corrective and preventive action plans, an optimized replacement interval for the belt, and recommendations for design changes according to the relevant standards.
- 20 July 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (14) , 11312
Open AccessBelt Rotation in Pipe Conveyors: Failure Mode Analysis and Overlap Stability Assessment
Pipe conveyors provide sustainable solutions for environmentally sensitive or topographically complex powdered and bulk-solid handling processes; however, belt rotation is among the most critical failure modes of these equipment, influencing engineering, operational, and maintenance activities throughout the conveyors’ lifecycles. Position changes in the overlap are mechanical responses to uneven contact forces between the vulcanizing rubber belt and the idler rolls, owing to the highly nonlinear process of the belt folding from a trough to a tubular shape, and no method for quantifying the belt’s stability is currently available. In this study, we analyzed the failure mode of belt rotation and proposed a linearized model of an overlap stability index to evaluate the resilience of the overlap position through a case study of a short-flight curved pipe conveyor. Our proposal considers an interference model between the simulated torque of a curved flight in a pipe conveyor and the calculated torque of its equivalent straight flight by using kernel-smoothed density functions. It is adapted to incorporate adjustment factors for the filling degree based on simulations, the effect of the overlap in the forming force of the belt, the remaining useful life of the belt, and the coefficients of friction between the belt back cover and the idler rolls due to adhesion and hysteresis. An application was developed to calculate the belt’s rotational holding torque and rotary moment by processing real operational data, simulated contact forces, and the relevant equipment parameters. This analysis identified the reduced transverse bending stiffness and increased belt tension forces as the root causes for position changes with a loss of contact in the upper idler rolls of curved flights 10, 13, 15–16, and 17. The contributing factors included spots of augmented contact forces during the initial stages of the belt lifespan in curved flights 15–16, which presented unstable conditions due to increased opening forces, with an OSI of 0.8657. Furthermore, we proposed corrective and preventive action plans, an optimized replacement interval for the belt, and recommendations for design changes according to the relevant standards.
- 31 May 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (17) , 20509-20521
Synthesis and tribological properties of bio-based lubricants from soybean oil
- 31 May 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (17) , 20509-20521
Synthesis and tribological properties of bio-based lubricants from soybean oil
- Open Access
- 31 January 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (2) , 57
Synthesis and Frictional Characteristics of Bio-Based Lubricants Obtained from Fatty Acids of Castor Oil
The depletion of oil reserves and concerns about the environmental impact of the use and incorrect disposal of mineral lubricants have been promoting the development of bio-based lubricants. In this study, biolubricants obtained from fatty acids of castor oil were synthesized by esterification (>wt.%93), epoxidation (>wt.%92), and oxirane ring opening reactions using water (>wt.%92) or 2-ethylhexanol (>wt.%94) as nucleophilic agents. The frictional characteristics of the synthesized samples were obtained through tribological tests performed in a four-ball tester and compared with a commercial mineral oil. The sample obtained through oxirane ring opening with water showed the best frictional performance (FC = 0.0699 ± 0.0007) among the prepared samples, with equivalent wear rate (WSD = 281.2 ± 5.54 μm) and ca. 20% lower friction coefficient when compared to the commercial mineral oil, indicating its great potential for replacing mineral fossil oils.
- 31 January 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (2) , 57
Open AccessSynthesis and Frictional Characteristics of Bio-Based Lubricants Obtained from Fatty Acids of Castor Oil
The depletion of oil reserves and concerns about the environmental impact of the use and incorrect disposal of mineral lubricants have been promoting the development of bio-based lubricants. In this study, biolubricants obtained from fatty acids of castor oil were synthesized by esterification (>wt.%93), epoxidation (>wt.%92), and oxirane ring opening reactions using water (>wt.%92) or 2-ethylhexanol (>wt.%94) as nucleophilic agents. The frictional characteristics of the synthesized samples were obtained through tribological tests performed in a four-ball tester and compared with a commercial mineral oil. The sample obtained through oxirane ring opening with water showed the best frictional performance (FC = 0.0699 ± 0.0007) among the prepared samples, with equivalent wear rate (WSD = 281.2 ± 5.54 μm) and ca. 20% lower friction coefficient when compared to the commercial mineral oil, indicating its great potential for replacing mineral fossil oils.
- 12 January 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (1) , 1-9
Tribological properties of bio-based lubricant basestock obtained from pequi oil (Caryocar brasiliensis)
- 12 January 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (1) , 1-9
Tribological properties of bio-based lubricant basestock obtained from pequi oil (Caryocar brasiliensis)
- 1 April 2021
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 43 (4) , 1-16
Indentation rolling resistance in pipe conveyor belts: a review
- 1 April 2021
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 43 (4) , 1-16
Indentation rolling resistance in pipe conveyor belts: a review