Xianhui Bu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xianhui Bu has a total of 212 co-authors. Here are the top co-authors by number of shared publications:
- Pingyun Feng
Department of Chemistry University of California Riverside, 900 University Ave Riverside CA 92521 USA
76 shared publications Xiang Zhao
Department of Chemistry University of California Riverside CA 92521 USA
20 shared publications- Dong-Sheng Li
College of Materials and Chemical Engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials China Three Gorges University Yichang China
18 shared publications Huajun Yang
Department of Chemistry and Biochemistry California State University Long Beach 1250 Bellflower Boulevard Long Beach CA 90840 USA
14 shared publicationsXitong Chen
Department of Chemistry University of California Riverside CA 92521 USA
14 shared publicationsYanxiang Wang
Department of Chemistry University of California Riverside 501 Big Springs Road Riverside CA 92521 USA
14 shared publications
Latest Publications
- 8 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (28) , 16614-16623
Compositional Tunability and Framework-Charge Modulation in Pore-Space-Partitioned Metal–Organic Frameworks
Trimer-based metal clusters are among the most compositionally versatile secondary building units in metal-organic frameworks (MOFs), but systematic control of heterometallic composition and framework charge within a structurally invariant platform remains challenging. Here, pore-space-partitioned acs (pacs) frameworks are employed as a model system to investigate compositional tunability at both the cluster and framework levels. Using 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylate (dtc), a family of homo- and heterometallic pacs-MOFs based on Mg2+, Co2+, In3+, and V3+ trimers was synthesized. In the charge-complementary Mg/In system, variation of metal precursors and solvents enables broad tuning of the Mg/In ratio, while the large atomic-number contrast permits reliable occupancy refinement by single-crystal X-ray diffraction. The trimeric platform also supports an isostructural Co-, Co/V-, and V-based series in which framework charge changes from anionic to neutral and cationic without altering topology. Gas adsorption studies reveal charge-dependent C2H2/CO2 and C2H6/C2H4 separation behavior. Notably, neutral CoV-dtc-tpt exhibits a high C2H6 uptake of 164.8 cm3 g-1 and excellent inverse-selective C2H6/C2H4 separation, rivaling benchmark pacs materials. These results establish pacs-MOFs as a versatile platform for studying heterometallic assembly, framework-charge modulation, and structure-composition-property relationships.
- 8 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (28) , 16614-16623
Compositional Tunability and Framework-Charge Modulation in Pore-Space-Partitioned Metal–Organic Frameworks
Trimer-based metal clusters are among the most compositionally versatile secondary building units in metal-organic frameworks (MOFs), but systematic control of heterometallic composition and framework charge within a structurally invariant platform remains challenging. Here, pore-space-partitioned acs (pacs) frameworks are employed as a model system to investigate compositional tunability at both the cluster and framework levels. Using 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylate (dtc), a family of homo- and heterometallic pacs-MOFs based on Mg2+, Co2+, In3+, and V3+ trimers was synthesized. In the charge-complementary Mg/In system, variation of metal precursors and solvents enables broad tuning of the Mg/In ratio, while the large atomic-number contrast permits reliable occupancy refinement by single-crystal X-ray diffraction. The trimeric platform also supports an isostructural Co-, Co/V-, and V-based series in which framework charge changes from anionic to neutral and cationic without altering topology. Gas adsorption studies reveal charge-dependent C2H2/CO2 and C2H6/C2H4 separation behavior. Notably, neutral CoV-dtc-tpt exhibits a high C2H6 uptake of 164.8 cm3 g-1 and excellent inverse-selective C2H6/C2H4 separation, rivaling benchmark pacs materials. These results establish pacs-MOFs as a versatile platform for studying heterometallic assembly, framework-charge modulation, and structure-composition-property relationships.
- 3 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (23) , 13292-13299
Expanding the Ligand Scope of Pore-Space-Partitioned MOFs with a Chiral Camphorate Linker
Expanding the scope of isoreticular chemistry to include chiral ligands remains a fundamental challenge, particularly for high-symmetry framework topologies that generally favor symmetry matching between building blocks and the crystallographic sites they occupy. Here, we demonstrate that the partitioned acs (pacs) platform can accommodate a chiral dicarboxylate ligand, (1R,3S)-(+)-camphoric acid (d-cam), representing the first pacs MOF constructed from a chiral L1 ligand. The successful assembly of the framework is enabled by the cooperative structure-directing effects of a tripyridyl pore-partitioning ligand and heterometallic Co/In trinuclear clusters, which collectively enforce alignment of ligand coordination vectors while permitting subtle charge and size tunability through variable Co2+/In3+ ratios within the trimers. Structural analysis reveals that the framework preserves the characteristic pacs architecture despite geometric distortion arising from the stereochemical features and low symmetry of the ligand. These results suggest that geometric mismatch is redistributed throughout the framework through cooperative distortion of ligand orientation, cage geometry, and trimer coordination environment. Gas sorption studies reveal preferential adsorption of C2H2 over CO2, while breakthrough experiments demonstrate stable C2H2/CO2 separation over multiple cycles. More broadly, this work suggests that cooperative multimodule assembly can relax classical symmetry-matching constraints in isoreticular chemistry.
- 3 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (23) , 13292-13299
Expanding the Ligand Scope of Pore-Space-Partitioned MOFs with a Chiral Camphorate Linker
Expanding the scope of isoreticular chemistry to include chiral ligands remains a fundamental challenge, particularly for high-symmetry framework topologies that generally favor symmetry matching between building blocks and the crystallographic sites they occupy. Here, we demonstrate that the partitioned acs (pacs) platform can accommodate a chiral dicarboxylate ligand, (1R,3S)-(+)-camphoric acid (d-cam), representing the first pacs MOF constructed from a chiral L1 ligand. The successful assembly of the framework is enabled by the cooperative structure-directing effects of a tripyridyl pore-partitioning ligand and heterometallic Co/In trinuclear clusters, which collectively enforce alignment of ligand coordination vectors while permitting subtle charge and size tunability through variable Co2+/In3+ ratios within the trimers. Structural analysis reveals that the framework preserves the characteristic pacs architecture despite geometric distortion arising from the stereochemical features and low symmetry of the ligand. These results suggest that geometric mismatch is redistributed throughout the framework through cooperative distortion of ligand orientation, cage geometry, and trimer coordination environment. Gas sorption studies reveal preferential adsorption of C2H2 over CO2, while breakthrough experiments demonstrate stable C2H2/CO2 separation over multiple cycles. More broadly, this work suggests that cooperative multimodule assembly can relax classical symmetry-matching constraints in isoreticular chemistry.
- 25 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (22) , 23067-23077
Ligand-Symmetry-Driven Metal-Cluster Rotation for Accessing Compressed Pore Regimes in Metal–Organic Frameworks
Isoreticular chemistry conventionally tunes pore dimensions by varying linker length or manipulating substituents. While widely used, this strategy is constrained by the intrinsic chemistry of molecular building units, rendering certain size regimes and pore geometries inaccessible. Here, we establish coordination symmetry as an independent and powerful design variable for unit-cell compression in pore-partitioned acs (pacs) metal-organic frameworks. Replacement of D3h-symmetric tris(4-pyridyl) ligands with their C3h-symmetric tris(3-pyridyl) positional isomers induces controlled rotation of metal clusters without altering ligand size or framework topology. Curvature-encoded dicarboxylate linkers define a finite metal-cluster rotation window, within which donor-position symmetry selects distinct rotational states, producing systematic contraction along the hexagonal a/b directions and up to ∼15% reduction in unit-cell volume. Across multiple metal trimers and ligand combinations, this symmetry-controlled compression enhances framework stability and dramatically improves gas-separation performance. Importantly, the strategy enables simultaneous increases in C2H2 uptake and C2H2/CO2 or C2H2/C2H4 selectivity, overcoming the commonly observed trade-off between adsorption capacity and selectivity in porous material design. Ni3-24fdc-3tpt achieves record C2H2/CO2 and C2H2/C2H4 selectivities within the pacs family (42.35 and 25.14, respectively), together with high separation potentials and robust breakthrough performance. These results demonstrate that ligand-symmetry-driven metal-cluster rotation provides a general and predictive route to access compressed pore regimes beyond conventional linker-length modulation and expands the conceptual framework of isoreticular chemistry.
- 25 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (22) , 23067-23077
Ligand-Symmetry-Driven Metal-Cluster Rotation for Accessing Compressed Pore Regimes in Metal–Organic Frameworks
Isoreticular chemistry conventionally tunes pore dimensions by varying linker length or manipulating substituents. While widely used, this strategy is constrained by the intrinsic chemistry of molecular building units, rendering certain size regimes and pore geometries inaccessible. Here, we establish coordination symmetry as an independent and powerful design variable for unit-cell compression in pore-partitioned acs (pacs) metal-organic frameworks. Replacement of D3h-symmetric tris(4-pyridyl) ligands with their C3h-symmetric tris(3-pyridyl) positional isomers induces controlled rotation of metal clusters without altering ligand size or framework topology. Curvature-encoded dicarboxylate linkers define a finite metal-cluster rotation window, within which donor-position symmetry selects distinct rotational states, producing systematic contraction along the hexagonal a/b directions and up to ∼15% reduction in unit-cell volume. Across multiple metal trimers and ligand combinations, this symmetry-controlled compression enhances framework stability and dramatically improves gas-separation performance. Importantly, the strategy enables simultaneous increases in C2H2 uptake and C2H2/CO2 or C2H2/C2H4 selectivity, overcoming the commonly observed trade-off between adsorption capacity and selectivity in porous material design. Ni3-24fdc-3tpt achieves record C2H2/CO2 and C2H2/C2H4 selectivities within the pacs family (42.35 and 25.14, respectively), together with high separation potentials and robust breakthrough performance. These results demonstrate that ligand-symmetry-driven metal-cluster rotation provides a general and predictive route to access compressed pore regimes beyond conventional linker-length modulation and expands the conceptual framework of isoreticular chemistry.
- 22 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (17) , 17862-17874
Generalizing Pore-Space Partitioning in Metal–Organic Frameworks
The development of a theoretical framework typically proceeds from idealized cases toward increasingly nonideal situations. Over the past decade, pore-space partitioning (PSP) has been predominantly explored in high-symmetry systems based on trimers at the highest D3h symmetry. Extending PSP toward a more general theoretical framework would encompass a purposeful reduction of the symmetry of building blocks or crystal symmetry. However, the design of partitioning strategies is more challenging in lower-symmetry situations. Herein, we report several new types of PSP-enabled metal-organic framework (MOF) platforms featuring ligand-triggered lower building-block symmetry or interpenetration-triggered lower crystal symmetry (even if the building-block symmetry is at the maximum). This expansion of PSP is realized through a new conceptual strategy termed retro-PSP, which enables the construction of partitioning ligands with adaptable symmetry and the discovery of tripyridyl ligands with C3h symmetry as partitioning ligands. In addition to a new form of partitioning mode for acs net (t2-pacs) via partitioning of a trigonal-bipyramidal cage (instead of previously observed partitioning of straight channels) and the hierarchical partition in 2- and 3-fold interpenetrating acs nets (x2-pacs and x3-pacs), we have also created the partitioned pcu (pcup) and partitioned nia (pnia) systems. This work results not only in the discovery of new topologies not known before, but also the experimental realization of topologies that had previously existed only as theoretical predictions. Collectively, this work establishes retro-PSP as a generalizable approach for extending PSP to include either more partition modes or more MOF platforms, resulting in new PSP-enabled materials with enhanced stability and tunable gas adsorption properties.
- 22 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (17) , 17862-17874
Generalizing Pore-Space Partitioning in Metal–Organic Frameworks
The development of a theoretical framework typically proceeds from idealized cases toward increasingly nonideal situations. Over the past decade, pore-space partitioning (PSP) has been predominantly explored in high-symmetry systems based on trimers at the highest D3h symmetry. Extending PSP toward a more general theoretical framework would encompass a purposeful reduction of the symmetry of building blocks or crystal symmetry. However, the design of partitioning strategies is more challenging in lower-symmetry situations. Herein, we report several new types of PSP-enabled metal-organic framework (MOF) platforms featuring ligand-triggered lower building-block symmetry or interpenetration-triggered lower crystal symmetry (even if the building-block symmetry is at the maximum). This expansion of PSP is realized through a new conceptual strategy termed retro-PSP, which enables the construction of partitioning ligands with adaptable symmetry and the discovery of tripyridyl ligands with C3h symmetry as partitioning ligands. In addition to a new form of partitioning mode for acs net (t2-pacs) via partitioning of a trigonal-bipyramidal cage (instead of previously observed partitioning of straight channels) and the hierarchical partition in 2- and 3-fold interpenetrating acs nets (x2-pacs and x3-pacs), we have also created the partitioned pcu (pcup) and partitioned nia (pnia) systems. This work results not only in the discovery of new topologies not known before, but also the experimental realization of topologies that had previously existed only as theoretical predictions. Collectively, this work establishes retro-PSP as a generalizable approach for extending PSP to include either more partition modes or more MOF platforms, resulting in new PSP-enabled materials with enhanced stability and tunable gas adsorption properties.
- 10 November 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Quantitative Analysis and Multicomponent Formulation of Ultra-Adsorptive Pore-Space-Partitioned Metal–Organic Frameworks
One tenet of isoreticular chemistry is the use of longer framework-building units to increase unit-cell and pore volume. While this belief has led to tremendous success as shown by isoreticular series such as IRMOF-1 to IRMOF-16 and MOF-74-I to MOF-74-XI, it can nevertheless be flawed as we move to multimodule systems, for which the quantitative analysis on the correlation between cell volume and ligand dimension can offer guidance on the rational formulation of MOF components. Here, through the synthesis of 60 new pacs materials, we report a broad expansion of pacs-type MOFs by extensively varying metal-trimer compositions, framework-forming ligands (L1), and pore-partitioning ligands (L2). This expanded structural library provides the experimental basis to highlight a nonmonotonic trend between unit-cell volumes and ligand lengths as an intrinsic property of the pacs platform. We further reveal an amplification of the stability-enhancing effect by the NiV trimer over other trimers as we transition to a greater pore-size regime, showing that the nickel-vanadium combination provides a crucial stabilizing factor for large pacs materials. The new structural family includes members with record-setting properties, including ultrahigh BET surface areas (>4400 m2/g) which is likely the highest among high-connected (>6) frameworks based on low-valent (≤3) metals. Multiple members of this family are believed to have the all-time-high propane uptake capacity (e.g., 15.6 mmol/g or 350.1 cm3/g at 298 K and 1 bar; 6.72 mmol/g or 150.7 cm3/g at 298 K and 0.1 bar), especially among C3H8-selective MOFs. The exceptional uptake capacity, coupled with inverse propane/propylene selectivity, enables efficient separation.
- 10 November 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Quantitative Analysis and Multicomponent Formulation of Ultra-Adsorptive Pore-Space-Partitioned Metal–Organic Frameworks
One tenet of isoreticular chemistry is the use of longer framework-building units to increase unit-cell and pore volume. While this belief has led to tremendous success as shown by isoreticular series such as IRMOF-1 to IRMOF-16 and MOF-74-I to MOF-74-XI, it can nevertheless be flawed as we move to multimodule systems, for which the quantitative analysis on the correlation between cell volume and ligand dimension can offer guidance on the rational formulation of MOF components. Here, through the synthesis of 60 new pacs materials, we report a broad expansion of pacs-type MOFs by extensively varying metal-trimer compositions, framework-forming ligands (L1), and pore-partitioning ligands (L2). This expanded structural library provides the experimental basis to highlight a nonmonotonic trend between unit-cell volumes and ligand lengths as an intrinsic property of the pacs platform. We further reveal an amplification of the stability-enhancing effect by the NiV trimer over other trimers as we transition to a greater pore-size regime, showing that the nickel-vanadium combination provides a crucial stabilizing factor for large pacs materials. The new structural family includes members with record-setting properties, including ultrahigh BET surface areas (>4400 m2/g) which is likely the highest among high-connected (>6) frameworks based on low-valent (≤3) metals. Multiple members of this family are believed to have the all-time-high propane uptake capacity (e.g., 15.6 mmol/g or 350.1 cm3/g at 298 K and 1 bar; 6.72 mmol/g or 150.7 cm3/g at 298 K and 0.1 bar), especially among C3H8-selective MOFs. The exceptional uptake capacity, coupled with inverse propane/propylene selectivity, enables efficient separation.
- 23 October 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (43) , 21781-21790
Isovalent Heterometallic Pore-Space-Partitioned Metal–Organic Frameworks
Metal trimers are versatile MOF building units, and heterometallic trimers can enable the modulation of charge, stability, and catalytic properties. While heterometallic trimers are known in other MOFs, the pacs (partitioned acs) platform has an extraordinary capacity to access unprecedented compositions due to its high isoreticular tolerance toward component variations. Currently, heterometallic combinations on pacs are largely limited to charge-complementary systems (2+/3+). In comparison, isovalent (2+/2+) and mixed isovalent-heterovalent (2+/2+/3+) combinations have been little studied. These underexplored compositions can be significant, as divalent metals with different ionic radii and redox properties can enable property control without changing the framework charge. Here, ten new pacs were synthesized from Co, Ni, V, Fe, and In using two framework-forming ligands (L1) and four pore-partitioning linkers (L2), affording frameworks that incorporate either 2+/2+ or 2+/2+/3+ trimers, including unprecedented compositions such as CoNiV and CoNiIn. Uniform incorporation of different metal ions within the same crystals was confirmed by EDS mapping. These new materials exhibit functional versatility, combining high C2H2/CO2 separation selectivity (23.8 at 298 K, 1 bar) with electrocatalytic OER activity. Compositional variations in trimers significantly influence catalytic behavior, underscoring the potential of heterometallic trimers as a platform for structural and functional tuning in MOFs.
- 23 October 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (43) , 21781-21790
Isovalent Heterometallic Pore-Space-Partitioned Metal–Organic Frameworks
Metal trimers are versatile MOF building units, and heterometallic trimers can enable the modulation of charge, stability, and catalytic properties. While heterometallic trimers are known in other MOFs, the pacs (partitioned acs) platform has an extraordinary capacity to access unprecedented compositions due to its high isoreticular tolerance toward component variations. Currently, heterometallic combinations on pacs are largely limited to charge-complementary systems (2+/3+). In comparison, isovalent (2+/2+) and mixed isovalent-heterovalent (2+/2+/3+) combinations have been little studied. These underexplored compositions can be significant, as divalent metals with different ionic radii and redox properties can enable property control without changing the framework charge. Here, ten new pacs were synthesized from Co, Ni, V, Fe, and In using two framework-forming ligands (L1) and four pore-partitioning linkers (L2), affording frameworks that incorporate either 2+/2+ or 2+/2+/3+ trimers, including unprecedented compositions such as CoNiV and CoNiIn. Uniform incorporation of different metal ions within the same crystals was confirmed by EDS mapping. These new materials exhibit functional versatility, combining high C2H2/CO2 separation selectivity (23.8 at 298 K, 1 bar) with electrocatalytic OER activity. Compositional variations in trimers significantly influence catalytic behavior, underscoring the potential of heterometallic trimers as a platform for structural and functional tuning in MOFs.
- 25 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (35) , 17997-18008
Design of Pore-Space-Partitioned Metal–Organic Frameworks Using Spiro Ligand Chemistry
An emerging direction in the design of crystalline porous materials is the application of bioisosteric replacement strategy that replaces benzene ring with an aliphatic core; however, maintaining isoreticular chemistry upon such replacement is elusive. While bicyclic cores have been employed for this purpose, few studies are known that use spiro ligands for designing metal-organic frameworks for gas separation applications. As a benzene bioisostere, spiro ligands are more challenging than other bioisosteres because they are more flexible and deviate significantly from that of para-benzene-based ligands. In this work, we show that the use of a pore-space-partition strategy generates a multimodule system in which it is possible to exert a high level of control over the positioning, orientation, and alignment of carboxylate groups in a spiro ligand. Here, we report a family of isoreticular MOFs on a partitioned acs (pacs) structure with spiro[3.3]heptane-2,6-dicarboxylic acid as the framework-forming module, together with three different pore-partition modules based on tripyridyl ligands. The isoreticular chemistry can be extended to both homometallic (Fe) and heterometallic (CoV and CoFe) compositions. These materials exhibit excellent sorption properties such as high uptake capacity for CO2 (61.9 cm3/g) and small hydrocarbon gases (e.g., 116.3 cm3/g for C2H2 and 101.4 cm3/g for C2H4), inverse C2H6/C2H4 selectivity, and promising separation performance for C2H2/CO2 (selectivity up to 5.5), C3H8/CH4 (selectivity up to 279), and C2H6/CH4 (selectivity up to 22.7) gas mixtures.
- 25 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (35) , 17997-18008
Design of Pore-Space-Partitioned Metal–Organic Frameworks Using Spiro Ligand Chemistry
An emerging direction in the design of crystalline porous materials is the application of bioisosteric replacement strategy that replaces benzene ring with an aliphatic core; however, maintaining isoreticular chemistry upon such replacement is elusive. While bicyclic cores have been employed for this purpose, few studies are known that use spiro ligands for designing metal-organic frameworks for gas separation applications. As a benzene bioisostere, spiro ligands are more challenging than other bioisosteres because they are more flexible and deviate significantly from that of para-benzene-based ligands. In this work, we show that the use of a pore-space-partition strategy generates a multimodule system in which it is possible to exert a high level of control over the positioning, orientation, and alignment of carboxylate groups in a spiro ligand. Here, we report a family of isoreticular MOFs on a partitioned acs (pacs) structure with spiro[3.3]heptane-2,6-dicarboxylic acid as the framework-forming module, together with three different pore-partition modules based on tripyridyl ligands. The isoreticular chemistry can be extended to both homometallic (Fe) and heterometallic (CoV and CoFe) compositions. These materials exhibit excellent sorption properties such as high uptake capacity for CO2 (61.9 cm3/g) and small hydrocarbon gases (e.g., 116.3 cm3/g for C2H2 and 101.4 cm3/g for C2H4), inverse C2H6/C2H4 selectivity, and promising separation performance for C2H2/CO2 (selectivity up to 5.5), C3H8/CH4 (selectivity up to 279), and C2H6/CH4 (selectivity up to 22.7) gas mixtures.
- 18 August 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (34) , 31239-31248
Dynamic Pore Space Partition in Zinc Metal–Organic Frameworks
Increasing the framework connectivity is a useful strategy to tune pore geometry and properties such as gas separation selectivity. Although highly connected frameworks are common for iconic clusters such as M3(O/OH) trimers and Zr6(O/OH)8 hexamers, they are rarely seen for Zn4O tetramers, one of the most famed MOF building blocks that predates both M3 and Zr6 in the MOF field. Here, we demonstrate that pore space partition (PSP) can unlock the potential of Zn4O for higher connectivity (>6). We show that on the pore-space-partitioned acs (pacs) platform, zinc-cluster chemistry is diverse and dynamic, yet it can be mapped out semiquantitatively. A large family of Znx-pacs materials (x = 2, 3, 4) with 3 different pore-partition mechanisms has been synthesized by applying PSP to the MOF-5-type system. We propose that the difference in the steric effect around 9-connected Zn3(OH) and Zn4O, exacerbated when the hexagonal c/a ratio is compressed, plays a key role in the discovery of a new pacs family based on 9-connected Zn4O. This work significantly broadens the scope of PSP because it no longer requires preoriented open-metal sites. New pacs materials show much better aqueous stability and greatly enhanced C2H2/C2H4 separation performance than the corresponding nonpartitioned MOF-5-type materials.
- 18 August 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (34) , 31239-31248
Dynamic Pore Space Partition in Zinc Metal–Organic Frameworks
Increasing the framework connectivity is a useful strategy to tune pore geometry and properties such as gas separation selectivity. Although highly connected frameworks are common for iconic clusters such as M3(O/OH) trimers and Zr6(O/OH)8 hexamers, they are rarely seen for Zn4O tetramers, one of the most famed MOF building blocks that predates both M3 and Zr6 in the MOF field. Here, we demonstrate that pore space partition (PSP) can unlock the potential of Zn4O for higher connectivity (>6). We show that on the pore-space-partitioned acs (pacs) platform, zinc-cluster chemistry is diverse and dynamic, yet it can be mapped out semiquantitatively. A large family of Znx-pacs materials (x = 2, 3, 4) with 3 different pore-partition mechanisms has been synthesized by applying PSP to the MOF-5-type system. We propose that the difference in the steric effect around 9-connected Zn3(OH) and Zn4O, exacerbated when the hexagonal c/a ratio is compressed, plays a key role in the discovery of a new pacs family based on 9-connected Zn4O. This work significantly broadens the scope of PSP because it no longer requires preoriented open-metal sites. New pacs materials show much better aqueous stability and greatly enhanced C2H2/C2H4 separation performance than the corresponding nonpartitioned MOF-5-type materials.
- 10 July 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (28) , 14731-14739
Solvent-Directed Assembly and Transition-Metal Functionalization of a Two-Dimensional Indium Chalcogenide Framework
Two-dimensional (2D) chalcogenide frameworks built from supertetrahedral clusters offer tunable architectures and postsynthetic flexibility. Open-framework chalcogenides are commonly synthesized at elevated temperatures. Exploring their synthesis under mild conditions can allow access to a greater range of materials and properties. Here, we report an amine- and solvent-directed strategy to selectively construct 1D, 2D, and 3D indium sulfide frameworks from the same precursors by solvent modulation. Among them, the 2D framework T2-InS-AEP features accessible interlayer space that enables postsynthetic incorporation of transition-metal ions (Fe, Co, Ni) through mild chloride-mediated etching and ion exchange. The resulting chalcogenide-derived materials retain crystallinity while exhibiting tunable compositions. Electrochemical studies reveal that Ni- and Co/Ni-modified derivatives show significantly enhanced oxygen evolution reaction (OER) performance, with the best materials achieving activities comparable to benchmark IrO2. This work highlights a generalizable approach to the modular design and functionalization of 2D chalcogenide frameworks.
- 10 July 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (28) , 14731-14739
Solvent-Directed Assembly and Transition-Metal Functionalization of a Two-Dimensional Indium Chalcogenide Framework
Two-dimensional (2D) chalcogenide frameworks built from supertetrahedral clusters offer tunable architectures and postsynthetic flexibility. Open-framework chalcogenides are commonly synthesized at elevated temperatures. Exploring their synthesis under mild conditions can allow access to a greater range of materials and properties. Here, we report an amine- and solvent-directed strategy to selectively construct 1D, 2D, and 3D indium sulfide frameworks from the same precursors by solvent modulation. Among them, the 2D framework T2-InS-AEP features accessible interlayer space that enables postsynthetic incorporation of transition-metal ions (Fe, Co, Ni) through mild chloride-mediated etching and ion exchange. The resulting chalcogenide-derived materials retain crystallinity while exhibiting tunable compositions. Electrochemical studies reveal that Ni- and Co/Ni-modified derivatives show significantly enhanced oxygen evolution reaction (OER) performance, with the best materials achieving activities comparable to benchmark IrO2. This work highlights a generalizable approach to the modular design and functionalization of 2D chalcogenide frameworks.
- 26 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (18) , 15146-15156
Heterometallic Aluminum Metal–Organic Frameworks
From spinel gemstone (MgAl2O4) to layered double hydroxides, nature has long relied on combinations between charge-complementary metal ions such as divalent metal ions (M2+) and Al3+ to create diverse valuable materials. However, for metal-organic frameworks (MOFs), heterometallic combinations such as Mg-Al are conspicuously absent. Here, we report a breakthrough in the synthesis of heterometallic Al-MOFs containing M2+/Al3+ trimeric clusters (M = Mg, Mn, Co, Ni). The synergistic effect between M(II) chlorides and aluminum lactate plays a critical role in the cooperative crystallization of M2+ and Al3+ into pore-space-partitioned MOFs (partitioned acs topology) with fast crystallization kinetics (about 3 h). New M2+/Al3+ MOFs exhibit highly tunable porosity and extraordinarily high uptakes for CO2 and small hydrocarbon molecules (112 cm3/g for CO2, 176 cm3/g for C2H2, 156 cm3/g for C2H4, and 163 cm3/g for C2H6) at 298 K and 1 bar. The high uptake capacity coupled with high selectivity (up to 8.5 for C2H2/CO2, 10.8 for C2H2/C2H4) gives rise to efficient separations of either C2H2/CO2 or C2H2/C2H4 gas mixtures, as confirmed by experimental breakthrough experiments.
- 26 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (18) , 15146-15156
Heterometallic Aluminum Metal–Organic Frameworks
From spinel gemstone (MgAl2O4) to layered double hydroxides, nature has long relied on combinations between charge-complementary metal ions such as divalent metal ions (M2+) and Al3+ to create diverse valuable materials. However, for metal-organic frameworks (MOFs), heterometallic combinations such as Mg-Al are conspicuously absent. Here, we report a breakthrough in the synthesis of heterometallic Al-MOFs containing M2+/Al3+ trimeric clusters (M = Mg, Mn, Co, Ni). The synergistic effect between M(II) chlorides and aluminum lactate plays a critical role in the cooperative crystallization of M2+ and Al3+ into pore-space-partitioned MOFs (partitioned acs topology) with fast crystallization kinetics (about 3 h). New M2+/Al3+ MOFs exhibit highly tunable porosity and extraordinarily high uptakes for CO2 and small hydrocarbon molecules (112 cm3/g for CO2, 176 cm3/g for C2H2, 156 cm3/g for C2H4, and 163 cm3/g for C2H6) at 298 K and 1 bar. The high uptake capacity coupled with high selectivity (up to 8.5 for C2H2/CO2, 10.8 for C2H2/C2H4) gives rise to efficient separations of either C2H2/CO2 or C2H2/C2H4 gas mixtures, as confirmed by experimental breakthrough experiments.