Khalid Alammar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Khalid Alammar has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
A. Agrawal
School of Aerospace and Mechanical Engineering, University of Oklahoma, 865 Asp Avenue, Room 212, Norman, OK 73019
1 shared publicationAbdullah Mohammed
King Saud University, Riyadh, Saudi Arabia
1 shared publication- Ajay K. Agrawal
University of Tuscaloosa
1 shared publication Burt W. Albers
School of Aerospace and Mechanical Engineering , University of Oklahoma , Norman , Oklahoma , USA
1 shared publicationLin-Wen Hu
Massachusetts Institute of Technology, Cambridge, MA
1 shared publication- Lin-Wen Hu
Mem. ASME Nuclear Reactor Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139
1 shared publication
Latest Publications
- Open Access
- 1 January 2011
- Published by National Library of Serbia in Thermal Science
- Vol. 15 (2) , 389-396
Flow and heat transfer characteristics downstream of a porous sudden expansion: A numerical study
Incompressible, axisymmetric laminar flow downstream of a porous expansion is simulated. Effect of the Darcy number and inertia coefficient on flow and heat transfer characteristics downstream of the expansion is investigated. The simulation revealed circulation downstream of the expansion. Decreasing the Darcy number is shown to decrease the circulation region. The Nusselt number, friction coefficient, and pressure drop are shown to increase, while reattachment and location of maximum heat transfer move upstream with decreasing Darcy number. Similar effects are observed with increasing inertia coefficient.
- 1 January 2011
- Published by National Library of Serbia in Thermal Science
- Vol. 15 (2) , 389-396
Open AccessFlow and heat transfer characteristics downstream of a porous sudden expansion: A numerical study
Incompressible, axisymmetric laminar flow downstream of a porous expansion is simulated. Effect of the Darcy number and inertia coefficient on flow and heat transfer characteristics downstream of the expansion is investigated. The simulation revealed circulation downstream of the expansion. Decreasing the Darcy number is shown to decrease the circulation region. The Nusselt number, friction coefficient, and pressure drop are shown to increase, while reattachment and location of maximum heat transfer move upstream with decreasing Darcy number. Similar effects are observed with increasing inertia coefficient.
- 1 January 2011
- Published by ASME International
- p. 963-967
Flow and Heat Transfer Characteristics of Heterogeneous Nanofluids in Pipes
Heterogeneous nanofluid flow in pipes is simulated. Assuming incompressible, axisymmetric, and laminar flow, effect of nanoparticle distribution and Prandtl number on flow and heat transfer characteristics is investigated. With nanoparticle overall volume concentration of 0.05, up to 20% heat transfer enhancement was predicted for fully developed heterogeneous flow compared to homogeneous nanofluid. At the entrance region, the enhancement is shown to increase with increasing Prandtl number.
- 1 January 2011
- Published by ASME International
- p. 963-967
Flow and Heat Transfer Characteristics of Heterogeneous Nanofluids in Pipes
Heterogeneous nanofluid flow in pipes is simulated. Assuming incompressible, axisymmetric, and laminar flow, effect of nanoparticle distribution and Prandtl number on flow and heat transfer characteristics is investigated. With nanoparticle overall volume concentration of 0.05, up to 20% heat transfer enhancement was predicted for fully developed heterogeneous flow compared to homogeneous nanofluid. At the entrance region, the enhancement is shown to increase with increasing Prandtl number.
- 3 April 2010
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 46 (5) , 541-546
Laminar flow and heat transfer characteristics of nanoparticle colloidal dispersions in water
- 3 April 2010
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 46 (5) , 541-546
Laminar flow and heat transfer characteristics of nanoparticle colloidal dispersions in water
- 20 May 2009
- Published by WITPRESS LTD.
- Vol. 48, 365-368
Turbulence: a new zero-equation model
A new, zero-equation turbulence model for average turbulent fluid flow was developed. The new model, which is based on the Boussinesq...
- 20 May 2009
- Published by WITPRESS LTD.
- Vol. 48, 365-368
Turbulence: a new zero-equation model
A new, zero-equation turbulence model for average turbulent fluid flow was developed. The new model, which is based on the Boussinesq...
- Open Access
- 1 January 2009
- Published by National Library of Serbia in Thermal Science
- Vol. 13 (4) , 175-181
Turbulent flow and heat transfer characteristics in U-tubes: A numerical study
Using the standard k-e model, 3-dimensional turbulent flow and heat transfer characteristics in U-tubes are investigated. Uncertainty is approximated using experimental correlations and grid independence study. Increasing the Dean number is shown to intensify a secondary flow within the curved section. The overall Nusselt number for the tube is found to decrease substantially relative to straight tubes, while the overall skin friction coefficient remains practically unaffected. Local skin friction coefficient, Nusselt number, and wall temperature along the tube wall are presented.
- 1 January 2009
- Published by National Library of Serbia in Thermal Science
- Vol. 13 (4) , 175-181
Open AccessTurbulent flow and heat transfer characteristics in U-tubes: A numerical study
Using the standard k-e model, 3-dimensional turbulent flow and heat transfer characteristics in U-tubes are investigated. Uncertainty is approximated using experimental correlations and grid independence study. Increasing the Dean number is shown to intensify a secondary flow within the curved section. The overall Nusselt number for the tube is found to decrease substantially relative to straight tubes, while the overall skin friction coefficient remains practically unaffected. Local skin friction coefficient, Nusselt number, and wall temperature along the tube wall are presented.
- 1 January 2009
- Published by ASME International
- p. 763-767
Laminar Flow and Heat Transfer Characteristics of Colloid Suspensions in Water: A Numerical Study
Numerical analysis is performed to examine axisymmetric laminar flow and heat transfer characteristics of colloidal dispersions of nanoparticles in water (nanofluids). Effect of volume fraction on flow and heat transfer characteristics is investigated. Four different materials, Alumina, Copper, Copper Oxide, and Graphite are considered. Heat transfer and property measurements were conducted previously for Alumina nanofluid. The measurements have shown that nanofluids can behave as homogeneous mixtures. It is found that oxide-based nanofluids offer the least heat transfer enhancement compared to elements-based nanofluids. When normalized by friction pressure drop, it is shown that graphite can have the highest effective heat transfer enhancement. For a given volume flow rate, all nanofluids exhibited linear increase in heat transfer enhancement with increasing colloids volume fraction, up to 0.05.
- 1 January 2009
- Published by ASME International
- p. 763-767
Laminar Flow and Heat Transfer Characteristics of Colloid Suspensions in Water: A Numerical Study
Numerical analysis is performed to examine axisymmetric laminar flow and heat transfer characteristics of colloidal dispersions of nanoparticles in water (nanofluids). Effect of volume fraction on flow and heat transfer characteristics is investigated. Four different materials, Alumina, Copper, Copper Oxide, and Graphite are considered. Heat transfer and property measurements were conducted previously for Alumina nanofluid. The measurements have shown that nanofluids can behave as homogeneous mixtures. It is found that oxide-based nanofluids offer the least heat transfer enhancement compared to elements-based nanofluids. When normalized by friction pressure drop, it is shown that graphite can have the highest effective heat transfer enhancement. For a given volume flow rate, all nanofluids exhibited linear increase in heat transfer enhancement with increasing colloids volume fraction, up to 0.05.
- Open Access
- 1 January 2007
- Published by National Library of Serbia in Thermal Science
- Vol. 11 (4) , 171-178
Effect of Prandtl number on heat transfer characteristics in an axisymmetric sudden expansion: A numerical study
Using the standard k-e turbulence model, an incompressible, axisymmetric turbulent flow with a sudden expansion was simulated. Effect of Prandtl number on heat transfer characteristics downstream of the expansion was investigated. The simulation revealed circulation downstream of the expansion. A secondary circulation (corner eddy) was also predicted. Reattachment was predicted at approximately 10 step heights. Corresponding to Prandtl number of 7.0, a peak Nusselt number 13 times the fully-developed value was predicted. The ratio of peak to fully-developed Nusselt number was shown to decrease with decreasing Prandtl number. Location of maximum Nusselt number was insensitive to Prandtl number.
- 1 January 2007
- Published by National Library of Serbia in Thermal Science
- Vol. 11 (4) , 171-178
Open AccessEffect of Prandtl number on heat transfer characteristics in an axisymmetric sudden expansion: A numerical study
Using the standard k-e turbulence model, an incompressible, axisymmetric turbulent flow with a sudden expansion was simulated. Effect of Prandtl number on heat transfer characteristics downstream of the expansion was investigated. The simulation revealed circulation downstream of the expansion. A secondary circulation (corner eddy) was also predicted. Reattachment was predicted at approximately 10 step heights. Corresponding to Prandtl number of 7.0, a peak Nusselt number 13 times the fully-developed value was predicted. The ratio of peak to fully-developed Nusselt number was shown to decrease with decreasing Prandtl number. Location of maximum Nusselt number was insensitive to Prandtl number.
- 15 December 2005
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 42 (9) , 861-866
Effect of cavity aspect ratio on flow and heat transfer characteristics in pipes: a numerical study
- 15 December 2005
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 42 (9) , 861-866
Effect of cavity aspect ratio on flow and heat transfer characteristics in pipes: a numerical study