Luís Teixeira de Lemos
Research Subjects
Research Interests
Luís Teixeira de Lemos has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Maria Elisabete Ferreira Silva
Department of Environment, Polytechnic University of Viseu, Viseu, Portugal
5 shared publications - Cristina Cunha-Queda
Department of Agricultural and Environmental Chemistry, Instituto Superior de Agronomia, Technical University of Lisbon (TULisbon), Tapada da Ajuda, 1349‐017 Lisboa, Portugal
4 shared publications - Olga Cristina Nunes
LEPABE‐Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering University of Porto Porto Portugal
4 shared publications - Isabel Brás
Department of Environment, School of Technology and Management, Polytechnic University of Viseu, 3504-510 Viseu, Portugal
3 shared publications - Paulo G. Pinho
BCISeD, Research Centre in Digital Services, Polytechnic Institute of Viseu, Campus Politécnico, 3504-510 Viseu, Portugal
3 shared publications - Arminda Alves
LEPABE—Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
2 shared publications
Latest Publications
- Open Access
- 1 August 2017
- Published by Elsevier in Energy Procedia
- Vol. 120, 349-356
Refuse Derived Fuel from Municipal Solid Waste rejected fractions- a Case Study
- 1 August 2017
- Published by Elsevier in Energy Procedia
- Vol. 120, 349-356
Open AccessRefuse Derived Fuel from Municipal Solid Waste rejected fractions- a Case Study
- 31 March 2017
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 75 (6) , 903-909
Heat-treated wood as chromium adsorption material
- 31 March 2017
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 75 (6) , 903-909
Heat-treated wood as chromium adsorption material
- Open Access
- 2 February 2017
- Published by BioResources in BioResources
- Vol. 12 (2) , 2339-2353
Cork Liquefaction for Polyurethane Foam Production
Cork Liquefaction for Polyurethane Foam Production
- 2 February 2017
- Published by BioResources in BioResources
- Vol. 12 (2) , 2339-2353
Open AccessCork Liquefaction for Polyurethane Foam Production
Cork Liquefaction for Polyurethane Foam Production
- 21 October 2016
- Published by Springer Nature in Energy Efficiency
- Vol. 10 (4) , 839-854
Natural ventilation and indoor air quality in educational buildings: experimental assessment and improvement strategies
- 21 October 2016
- Published by Springer Nature in Energy Efficiency
- Vol. 10 (4) , 839-854
Natural ventilation and indoor air quality in educational buildings: experimental assessment and improvement strategies
- 1 May 2016
- Published by Elsevier in Applied Acoustics
- Vol. 106, 129-134
Aspects concerning the acoustical performance of school buildings in Portugal
- 1 May 2016
- Published by Elsevier in Applied Acoustics
- Vol. 106, 129-134
Aspects concerning the acoustical performance of school buildings in Portugal
- 19 June 2014
- Published by CSIRO Publishing in International Journal of Wildland Fire
- Vol. 23 (5) , 721-732
Equilibrium moisture content and timelag of dead Pinus pinaster needles
Modelling adsorption and desorption processes and equilibrium moisture content of dead fine fuels below fibre saturation is required to provide an accurate prediction of their drying and wetting processes within the range where flammability increases rapidly with decreasing moisture content. Data from laboratory tests on sorption processes and equilibrium moisture content isotherms of dead Pinus pinaster (Ait.) needles were used to evaluate several models applicable to fine forest fuels and agricultural and food products. Laboratory and field data were used to assess model accuracy in predicting drying and wetting curves and equilibrium moisture content isotherms showing a medium to high predictive ability for almost all cases. The best fitting combinations were obtained with the application of agricultural and food products models for drying and wetting phases and fine forest fuel models for equilibrium moisture content determination.
- 19 June 2014
- Published by CSIRO Publishing in International Journal of Wildland Fire
- Vol. 23 (5) , 721-732
Equilibrium moisture content and timelag of dead Pinus pinaster needles
Modelling adsorption and desorption processes and equilibrium moisture content of dead fine fuels below fibre saturation is required to provide an accurate prediction of their drying and wetting processes within the range where flammability increases rapidly with decreasing moisture content. Data from laboratory tests on sorption processes and equilibrium moisture content isotherms of dead Pinus pinaster (Ait.) needles were used to evaluate several models applicable to fine forest fuels and agricultural and food products. Laboratory and field data were used to assess model accuracy in predicting drying and wetting curves and equilibrium moisture content isotherms showing a medium to high predictive ability for almost all cases. The best fitting combinations were obtained with the application of agricultural and food products models for drying and wetting phases and fine forest fuel models for equilibrium moisture content determination.
- 1 January 2014
- Published by Elsevier in Waste Management
- Vol. 34 (1) , 21-27
Influence of the composition of the initial mixtures on the chemical composition, physicochemical properties and humic-like substances content of composts
- 1 January 2014
- Published by Elsevier in Waste Management
- Vol. 34 (1) , 21-27
Influence of the composition of the initial mixtures on the chemical composition, physicochemical properties and humic-like substances content of composts
- 1 January 2013
- Published by Elsevier in Bioresource Technology
- Vol. 128, 624-632
Recovery of humic-like susbtances from low quality composts
- 1 January 2013
- Published by Elsevier in Bioresource Technology
- Vol. 128, 624-632
Recovery of humic-like susbtances from low quality composts
- 17 November 2012
- Published by Springer Nature
- p. 511-516
Correlation Between Humic-Like Substances and Heavy Metals in Composts
- 17 November 2012
- Published by Springer Nature
- p. 511-516
Correlation Between Humic-Like Substances and Heavy Metals in Composts
- 1 March 2009
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 27 (2) , 119-128
Co-composting of poultry manure with low quantities of carbon-rich materials
To study the feasibility of co-composting poultry manure with low quantities of high-value, carbon-rich materials experiments to characterize three pilot-scale piles were carried out. The piles comprised poultry manure (pile 1), poultry manure and straw (pile 2) and poultry manure and sawdust (pile 3), using wood chips as bulking agent. Pile 1 presented the highest losses of organic matter and nitrogen contents (≥ 92.9% and 92.0%, respectively). Although a thermophilic phase (temperature > 40 °C) was not verified for this pile, the final compost was stable (class IV) and free of pathogen indicator micro-organisms but it was the most phytotoxic, and presented a humic and fulvic acids ratio (HA/FA) that was less than 1. In contrast, piles 2 and 3 sustained thermophilic phases and produced stable (class V) and mature (HA/FA > 1) composts. Pile 2 showed the lowest loss in nitrogen content (88.9%) and produced the final compost with the highest C/N ratio (14.7) and the lowest value of electrical conductivity (3.9 mS cm—1). This study showed that it is possible to reduce the costs of poultry manure composting, namely the costs associated with the use of carbon-rich materials, given that the final co-composts presented parameters within the range of those recommended by the Second Draft Proposal for compost quality.
- 1 March 2009
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 27 (2) , 119-128
Co-composting of poultry manure with low quantities of carbon-rich materials
To study the feasibility of co-composting poultry manure with low quantities of high-value, carbon-rich materials experiments to characterize three pilot-scale piles were carried out. The piles comprised poultry manure (pile 1), poultry manure and straw (pile 2) and poultry manure and sawdust (pile 3), using wood chips as bulking agent. Pile 1 presented the highest losses of organic matter and nitrogen contents (≥ 92.9% and 92.0%, respectively). Although a thermophilic phase (temperature > 40 °C) was not verified for this pile, the final compost was stable (class IV) and free of pathogen indicator micro-organisms but it was the most phytotoxic, and presented a humic and fulvic acids ratio (HA/FA) that was less than 1. In contrast, piles 2 and 3 sustained thermophilic phases and produced stable (class V) and mature (HA/FA > 1) composts. Pile 2 showed the lowest loss in nitrogen content (88.9%) and produced the final compost with the highest C/N ratio (14.7) and the lowest value of electrical conductivity (3.9 mS cm—1). This study showed that it is possible to reduce the costs of poultry manure composting, namely the costs associated with the use of carbon-rich materials, given that the final co-composts presented parameters within the range of those recommended by the Second Draft Proposal for compost quality.