Jianxin Geng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianxin Geng has a total of 321 co-authors. Here are the top co-authors by number of shared publications:
Yong Huang
Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, 29 Zhongguancun East Road, Haidian District, Beijing 100190, China
27 shared publicationsShang Chen
State Key Laboratory of Organic‐Inorganic Composites Beijing Advanced Innovation Center for Soft Matter Science and Engineering Beijing University of Chemical Technology Beijing China
24 shared publicationsXiaodong Meng
24 shared publicationsJi Zhou
State Key Laboratory of Organic‐Inorganic Composites Beijing Advanced Innovation Center for Soft Matter Science and Engineering Beijing University of Chemical Technology Beijing China
22 shared publicationsJinhua Sun
Department of Industrial and Materials Science, Chalmers University of Technology, 41296 Gothenburg, Sweden
22 shared publicationsChristopher W. Bielawski
Center for Multidimensional Carbon Materials (CMCM) Institute for Basic Science (IBS) Department of Chemistry Ulsan National Institute of Science and Technology (UNIST) Ulsan 44919 Republic of Korea
21 shared publications
Latest Publications
- 18 October 2026
- Published by Wiley in Advanced Energy Materials
Engineering Advanced Electrocatalysts for Energy‐Saving Zinc−Air Hybrid Batteries: Concurrent Energy Storage Coupled With Chemical Upgrading
Additive‐assisted zinc−air hybrid batteries (ZAHBs) that couple favorable additive oxidation with oxygen reduction represent ideal energy storage candidates, distinguished by high theoretical energy density, reduced charging voltage, and functionality for electrochemical upgrading of organics or wastewater. Herein, a critical overview of ZAHBs is provided, commencing with the fundamental electrochemistry (including advantages, working mechanisms, cell configurations, and evaluation parameters) and the selection criteria for small‐molecule additives (including theoretical potential, solubility, stability, toxicity, and volatility). We then summarize recent progress in three categories of ZAHBs (i.e., wastewater‐purified, value‐added, and redox‐mediated), discussing alternative anodic oxidation reactions (e.g., alcohol, urea, hydrazine, and iodine oxidation) coupled with cathodic oxygen reduction, along with the underlying catalytic mechanisms. Particular emphasis is placed on catalyst design strategies spanning electronic (ligand engineering, heteroatom doping, electron delocalization, orbital hybridization, and built‐in electric field), geometric (defect engineering, curvature engineering, and nano‐confinement effect), and interfacial (high‐energy interface, heterostructure, interfacial microenvironment, and core–shell structure) modulations. Finally, we discuss the remaining challenges and future perspectives for advancing ZAHBs. This review offers valuable guidance for the rational design and practical deployment of next‐generation energy devices.
- 18 October 2026
- Published by Wiley in Advanced Energy Materials
Engineering Advanced Electrocatalysts for Energy‐Saving Zinc−Air Hybrid Batteries: Concurrent Energy Storage Coupled With Chemical Upgrading
Additive‐assisted zinc−air hybrid batteries (ZAHBs) that couple favorable additive oxidation with oxygen reduction represent ideal energy storage candidates, distinguished by high theoretical energy density, reduced charging voltage, and functionality for electrochemical upgrading of organics or wastewater. Herein, a critical overview of ZAHBs is provided, commencing with the fundamental electrochemistry (including advantages, working mechanisms, cell configurations, and evaluation parameters) and the selection criteria for small‐molecule additives (including theoretical potential, solubility, stability, toxicity, and volatility). We then summarize recent progress in three categories of ZAHBs (i.e., wastewater‐purified, value‐added, and redox‐mediated), discussing alternative anodic oxidation reactions (e.g., alcohol, urea, hydrazine, and iodine oxidation) coupled with cathodic oxygen reduction, along with the underlying catalytic mechanisms. Particular emphasis is placed on catalyst design strategies spanning electronic (ligand engineering, heteroatom doping, electron delocalization, orbital hybridization, and built‐in electric field), geometric (defect engineering, curvature engineering, and nano‐confinement effect), and interfacial (high‐energy interface, heterostructure, interfacial microenvironment, and core–shell structure) modulations. Finally, we discuss the remaining challenges and future perspectives for advancing ZAHBs. This review offers valuable guidance for the rational design and practical deployment of next‐generation energy devices.
- Open Access
- 22 September 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (41) , e71631
An Azacrown Electrolyte for High‐Performance Sodium‐Ion Batteries
Sodium (Na)‐ion batteries (SIBs) are promising energy storage devices. However, they still do not exhibit satisfactory performance metrics largely because the relatively large ionic radius of Na + results in unfavorable solvation structures. This work demonstrates that using an azacrown (i.e., 1,4,7,10,13‐pentamethyl‐1,4,7,10,13‐pentaazacyclopentadecane, PMPAC) as a co‐solvent of the electrolyte can overcome the fundamental issues associated with SIBs. PMPAC features a cavity that not only matches the ionic radius of Na + but chelates the metal ions as well. As a result, PMPAC effectively encapsulates Na + and affords a disc‐like solvation complex with a relatively small solvation radius. These characteristics bestow the PMPAC‐based electrolytes with high ion conductivity and Na + transference number, which promote battery operation by enabling Na to plate in a homogeneous manner. The PMPAC also prompts anions to locate in the inner sheath of the Na + solvation structure such that inorganic‐rich solid‐electrolyte interphase layers with high structural integrity and low charge transfer resistance are formed at the anodes. SIBs that utilize PMPAC‐based electrolytes exhibit outstanding rate capacities (38 mAh g −1 at 100 C), along with ultralow capacity decay rates (0.0024% per cycle over 20 000 cycles for a half cell and 0.0062% per cycle over 10 000 cycles for a full cell).
- 22 September 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (41) , e71631
Open AccessAn Azacrown Electrolyte for High‐Performance Sodium‐Ion Batteries
Sodium (Na)‐ion batteries (SIBs) are promising energy storage devices. However, they still do not exhibit satisfactory performance metrics largely because the relatively large ionic radius of Na + results in unfavorable solvation structures. This work demonstrates that using an azacrown (i.e., 1,4,7,10,13‐pentamethyl‐1,4,7,10,13‐pentaazacyclopentadecane, PMPAC) as a co‐solvent of the electrolyte can overcome the fundamental issues associated with SIBs. PMPAC features a cavity that not only matches the ionic radius of Na + but chelates the metal ions as well. As a result, PMPAC effectively encapsulates Na + and affords a disc‐like solvation complex with a relatively small solvation radius. These characteristics bestow the PMPAC‐based electrolytes with high ion conductivity and Na + transference number, which promote battery operation by enabling Na to plate in a homogeneous manner. The PMPAC also prompts anions to locate in the inner sheath of the Na + solvation structure such that inorganic‐rich solid‐electrolyte interphase layers with high structural integrity and low charge transfer resistance are formed at the anodes. SIBs that utilize PMPAC‐based electrolytes exhibit outstanding rate capacities (38 mAh g −1 at 100 C), along with ultralow capacity decay rates (0.0024% per cycle over 20 000 cycles for a half cell and 0.0062% per cycle over 10 000 cycles for a full cell).
Solute‐Induced Nonplanar Ice Growth Facilitates Space‐Confined Polymerization for Two‐Dimensional Polymer Sheets
While the ice‐templating method has emerged as a powerful approach for fabricating complex architectures of various materials, the underlying mechanism has yet to be fully elucidated. Here, it's shown that dissolved solutes drive nonplanar ice crystal growth and generate interfacial boundaries where polymerization reactions can be space‐confined. The ice crystal growth fronts are captured using in situ optical microscopy and observed to exhibit a sheath‐like appearance, a result that is rationalized using constitutional supercooling theory. Building on these results, two‐dimensional (2D) polymer sheets of poly(3,4‐ethylenedioxythiophene) (PEDOT), polypyrrole (PPy), and polyaniline (PANI) with relatively high crystallinities are realized when micelles of sodium dodecyl sulfate are used to confine the oxidative polymerizations of the constituent monomers within the boundaries of the corresponding ice crystals. Supercapacitors (SCs) fabricated with the 2D PEDOT, PPy, and PANI sheets are found to exhibit high areal capacitances of 242.2, 640.9, and 648.2 mF cm −2 at 0.2 mA cm −2 , respectively. Moreover, the SCs display remarkable cycling stabilities, i.e., 98.4%, 72.3%, and 81.6% of the respective initial capacitance values after 10 000 cycles at 10 mA cm −2 . These results advance the mechanistic understanding of the ice‐templating technique and expand its potential utility in the rational design of hierarchically structured materials.
Solute‐Induced Nonplanar Ice Growth Facilitates Space‐Confined Polymerization for Two‐Dimensional Polymer Sheets
While the ice‐templating method has emerged as a powerful approach for fabricating complex architectures of various materials, the underlying mechanism has yet to be fully elucidated. Here, it's shown that dissolved solutes drive nonplanar ice crystal growth and generate interfacial boundaries where polymerization reactions can be space‐confined. The ice crystal growth fronts are captured using in situ optical microscopy and observed to exhibit a sheath‐like appearance, a result that is rationalized using constitutional supercooling theory. Building on these results, two‐dimensional (2D) polymer sheets of poly(3,4‐ethylenedioxythiophene) (PEDOT), polypyrrole (PPy), and polyaniline (PANI) with relatively high crystallinities are realized when micelles of sodium dodecyl sulfate are used to confine the oxidative polymerizations of the constituent monomers within the boundaries of the corresponding ice crystals. Supercapacitors (SCs) fabricated with the 2D PEDOT, PPy, and PANI sheets are found to exhibit high areal capacitances of 242.2, 640.9, and 648.2 mF cm −2 at 0.2 mA cm −2 , respectively. Moreover, the SCs display remarkable cycling stabilities, i.e., 98.4%, 72.3%, and 81.6% of the respective initial capacitance values after 10 000 cycles at 10 mA cm −2 . These results advance the mechanistic understanding of the ice‐templating technique and expand its potential utility in the rational design of hierarchically structured materials.
- Open Access
- 23 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Electronically coupled Co single atoms with Co-Pd alloy catalyst for high-performance rechargeable hydrazine-assisted Zn−Air batteries
Zinc−air batteries are promising devices for use in safe and cost-effective energy storage applications. However, their practical utility is hindered by sluggish oxygen evolution and oxygen reduction reactions. We show that hybridizing electronically coupled Co single atoms and a CoPd alloy within a three-dimensional macroporous N-doped carbon (CoPd/Co@3D NC) enables high-performance N2H4-assisted zinc−air batteries, where the oxygen evolution reaction is replaced with the thermodynamically more favorable hydrazine oxidation reaction. Experimental and theoretical data reveal that electronic coupling between the Co single atoms and the CoPd alloy mutually modifies their electronic structures, which, in turn, weakens oxygen adsorption on the Co single atoms and enhances N2H4 adsorption on the Pd sites. The electronic-coupling effect accelerates the rate-limiting steps of the oxygen evolution and hydrazine oxidation reactions. Consequently, N2H4-assisted zinc−air batteries employing CoPd/Co@3D NC exhibit a small charging/discharging voltage gap of 0.52 V at 100 mA cm−2, a peak specific power of 151 mW cm−2, and a specific capacity of 810 mAh g−1 at 10 mA cm−2; these values are competitive when compared to those exhibited by conventional zinc−air batteries.
- 23 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessElectronically coupled Co single atoms with Co-Pd alloy catalyst for high-performance rechargeable hydrazine-assisted Zn−Air batteries
Zinc−air batteries are promising devices for use in safe and cost-effective energy storage applications. However, their practical utility is hindered by sluggish oxygen evolution and oxygen reduction reactions. We show that hybridizing electronically coupled Co single atoms and a CoPd alloy within a three-dimensional macroporous N-doped carbon (CoPd/Co@3D NC) enables high-performance N2H4-assisted zinc−air batteries, where the oxygen evolution reaction is replaced with the thermodynamically more favorable hydrazine oxidation reaction. Experimental and theoretical data reveal that electronic coupling between the Co single atoms and the CoPd alloy mutually modifies their electronic structures, which, in turn, weakens oxygen adsorption on the Co single atoms and enhances N2H4 adsorption on the Pd sites. The electronic-coupling effect accelerates the rate-limiting steps of the oxygen evolution and hydrazine oxidation reactions. Consequently, N2H4-assisted zinc−air batteries employing CoPd/Co@3D NC exhibit a small charging/discharging voltage gap of 0.52 V at 100 mA cm−2, a peak specific power of 151 mW cm−2, and a specific capacity of 810 mAh g−1 at 10 mA cm−2; these values are competitive when compared to those exhibited by conventional zinc−air batteries.
- 18 June 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (10) , 1648-1657
Two-dimensional Dirac half-metallic Cr2C sheets with a clean surface and high stability
- 18 June 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (10) , 1648-1657
Two-dimensional Dirac half-metallic Cr2C sheets with a clean surface and high stability
- 5 April 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (22)
Ultrathick Interlayer Coupled Reduced Graphene Oxide Films for Multidirectional Heat Transport and Electrothermal Energy Conversion
Efficient thermal management remains a key challenge for high‐power electronics due to the limited availability of materials capable of withstanding extreme heat fluxes (>1000 W·cm −2 ). Although individual graphene sheets exhibit exceptional intrinsic thermal conductivities, stacked graphene films suffer from severe thermal anisotropy and poor through‐plane heat transport because of the weak van der Waals interactions. Here, we report a scalable strategy to construct interlayer‐coupled reduced graphene oxide (rGO) films with covalent carbon bonding across stacking layers. Partially oxidized GO films with controlled hydroxyl densities are first connected by aryl ether bridges via nucleophilic aromatic substitution, which transform into robust carbon linkages upon graphitization. A representative 200 µm‐thick film simultaneously exhibits high in‐plane and through‐plane thermal conductivities of 1465 ± 63 and 14.0 ± 1.2 W·m −1 ·K −1 , respectively. Comparable performance is retained at a thickness of 300 µm and temperatures up to 250°C. Under an extreme heat flux of 1200 W·cm −2 , the film lowers its temperature by 110°C within 20 s and shows excellent cycling stability. The high thermal and electrical conductivities also enable fast, uniform, and durable electrothermal heating. This work provides a practical route to overcoming the intrinsic anisotropy of graphene assemblies for advanced thermal management applications.
- 5 April 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (22)
Ultrathick Interlayer Coupled Reduced Graphene Oxide Films for Multidirectional Heat Transport and Electrothermal Energy Conversion
Efficient thermal management remains a key challenge for high‐power electronics due to the limited availability of materials capable of withstanding extreme heat fluxes (>1000 W·cm −2 ). Although individual graphene sheets exhibit exceptional intrinsic thermal conductivities, stacked graphene films suffer from severe thermal anisotropy and poor through‐plane heat transport because of the weak van der Waals interactions. Here, we report a scalable strategy to construct interlayer‐coupled reduced graphene oxide (rGO) films with covalent carbon bonding across stacking layers. Partially oxidized GO films with controlled hydroxyl densities are first connected by aryl ether bridges via nucleophilic aromatic substitution, which transform into robust carbon linkages upon graphitization. A representative 200 µm‐thick film simultaneously exhibits high in‐plane and through‐plane thermal conductivities of 1465 ± 63 and 14.0 ± 1.2 W·m −1 ·K −1 , respectively. Comparable performance is retained at a thickness of 300 µm and temperatures up to 250°C. Under an extreme heat flux of 1200 W·cm −2 , the film lowers its temperature by 110°C within 20 s and shows excellent cycling stability. The high thermal and electrical conductivities also enable fast, uniform, and durable electrothermal heating. This work provides a practical route to overcoming the intrinsic anisotropy of graphene assemblies for advanced thermal management applications.
- 24 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (4) , 6796-6808
Electronic Spin State Determines Bidirectional Catalysis of Dual-Atom Catalysts in Sulfur Cathodes
The electronic spin state of metal atomic catalysts is pivotal in determining their catalytic activities. However, such catalysts that are prepared via conventional synthetic approaches often suffer from poorly defined coordination environments, which create challenges in precisely controlling their electronic spin configurations. Herein, we show that a CoFe dual-atom catalyst featuring coordinatively asymmetric FeN2 and CoN3 sites with a fixed coupling distance can be synthesized using a conjugated microporous polymer (designated as CoFe-CMP) and then demonstrate that the catalyst promotes the key reactions underlying both charging and discharge processes of sulfur cathodes. Experimental and theoretical data reveal that the Fe atoms adopt a high-spin state (S = 3/2) and the Co atoms assume a low-spin state (S = 1/2). The former configuration enhances electronic coupling with polysulfides, while the latter promotes the diffusion of Li atoms that are released upon Li2S degradation. Collectively, these processes facilitate the interconversion between polysulfides and Li2S, which are critical for optimizing lithium-sulfur (Li-S) battery operation. Li-S cells containing CoFe-CMP as the sulfur host exhibit outstanding performance in terms of specific capacity (1487 mAh g-1 at 0.1 C), rate capacity (676.3 mAh g-1 at 5 C), and cycling stability (a specific capacity of 499.2 mAh g-1 is measured after 300 cycles at 0.2 C). This research provides a general methodology for tuning the electronic spin states of metal atomic catalysts, as well as guidance for adapting these catalysts for use in other applications.
- 24 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (4) , 6796-6808
Electronic Spin State Determines Bidirectional Catalysis of Dual-Atom Catalysts in Sulfur Cathodes
The electronic spin state of metal atomic catalysts is pivotal in determining their catalytic activities. However, such catalysts that are prepared via conventional synthetic approaches often suffer from poorly defined coordination environments, which create challenges in precisely controlling their electronic spin configurations. Herein, we show that a CoFe dual-atom catalyst featuring coordinatively asymmetric FeN2 and CoN3 sites with a fixed coupling distance can be synthesized using a conjugated microporous polymer (designated as CoFe-CMP) and then demonstrate that the catalyst promotes the key reactions underlying both charging and discharge processes of sulfur cathodes. Experimental and theoretical data reveal that the Fe atoms adopt a high-spin state (S = 3/2) and the Co atoms assume a low-spin state (S = 1/2). The former configuration enhances electronic coupling with polysulfides, while the latter promotes the diffusion of Li atoms that are released upon Li2S degradation. Collectively, these processes facilitate the interconversion between polysulfides and Li2S, which are critical for optimizing lithium-sulfur (Li-S) battery operation. Li-S cells containing CoFe-CMP as the sulfur host exhibit outstanding performance in terms of specific capacity (1487 mAh g-1 at 0.1 C), rate capacity (676.3 mAh g-1 at 5 C), and cycling stability (a specific capacity of 499.2 mAh g-1 is measured after 300 cycles at 0.2 C). This research provides a general methodology for tuning the electronic spin states of metal atomic catalysts, as well as guidance for adapting these catalysts for use in other applications.
- 19 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (9)
Dynamic Microinterfacial Polymerization Enables Scalable Synthesis of Two‐Dimensional Polymer Sheets for Quasi‐Solid‐State Electrolytes in Sodium‐Metal Batteries
Organic two‐dimensional (2D) materials hold great potential in a broad range of applications. However, their practical utility is constrained by limited structural diversity and a lack of synthetic strategies. Herein, we report that simply stirring immiscible solutions of poly(propylene glycol)bis(2‐aminopropyl ether) and 1,3,5‐benzenetricarbonyl trichloride results in a dynamic microinterfacial polymerization that affords novel 2D polymer sheets (designated as PEO‐BTA). These sheets can be transformed to Na‐ion conducting materials via treatment with sodium hydride, followed by incorporation of a prototypical MOF, HKUST‐1, to obtain composite sheets (MOF@PEO‐BTA‐Na) that retain the structural integrity of the original 2D polymer sheets. The 2D composite sheets can be assembled into self‐supporting membranes and used as a quasi‐solid‐state electrolyte (QSSE) with a remarkably high ionic conductivity value of 2.80 × 10 −3 S cm −1 and a Na + transference number of 0.95. Consequently, the QSSE facilitates uniform Na plating in Na//Na and Na//Cu cells. Na//NaTi 2 (PO 4 ) 3 cells containing MOF@PEO‐BTA‐Na QSSE exhibit a high initial specific capacity (129.1 mAh g −1 at 0.5 C), superior rate capability (60.0 mAh g −1 at 20 C), and high‐capacity retention (92% after 1000 cycles at 1 C). This work establishes a new, scalable approach for synthesizing 2D organic sheets with promising applications in energy‐related areas.
- 19 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (9)
Dynamic Microinterfacial Polymerization Enables Scalable Synthesis of Two‐Dimensional Polymer Sheets for Quasi‐Solid‐State Electrolytes in Sodium‐Metal Batteries
Organic two‐dimensional (2D) materials hold great potential in a broad range of applications. However, their practical utility is constrained by limited structural diversity and a lack of synthetic strategies. Herein, we report that simply stirring immiscible solutions of poly(propylene glycol)bis(2‐aminopropyl ether) and 1,3,5‐benzenetricarbonyl trichloride results in a dynamic microinterfacial polymerization that affords novel 2D polymer sheets (designated as PEO‐BTA). These sheets can be transformed to Na‐ion conducting materials via treatment with sodium hydride, followed by incorporation of a prototypical MOF, HKUST‐1, to obtain composite sheets (MOF@PEO‐BTA‐Na) that retain the structural integrity of the original 2D polymer sheets. The 2D composite sheets can be assembled into self‐supporting membranes and used as a quasi‐solid‐state electrolyte (QSSE) with a remarkably high ionic conductivity value of 2.80 × 10 −3 S cm −1 and a Na + transference number of 0.95. Consequently, the QSSE facilitates uniform Na plating in Na//Na and Na//Cu cells. Na//NaTi 2 (PO 4 ) 3 cells containing MOF@PEO‐BTA‐Na QSSE exhibit a high initial specific capacity (129.1 mAh g −1 at 0.5 C), superior rate capability (60.0 mAh g −1 at 20 C), and high‐capacity retention (92% after 1000 cycles at 1 C). This work establishes a new, scalable approach for synthesizing 2D organic sheets with promising applications in energy‐related areas.
- 19 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e24650
Dynamic Microinterfacial Polymerization Enables Scalable Synthesis of Two‐Dimensional Polymer Sheets for Quasi‐Solid‐State Electrolytes in Sodium‐Metal Batteries
Organic two‐dimensional (2D) materials hold great potential in a broad range of applications. However, their practical utility is constrained by limited structural diversity and a lack of synthetic strategies. Herein, we report that simply stirring immiscible solutions of poly(propylene glycol)bis(2‐aminopropyl ether) and 1,3,5‐benzenetricarbonyl trichloride results in a dynamic microinterfacial polymerization that affords novel 2D polymer sheets (designated as PEO‐BTA). These sheets can be transformed to Na‐ion conducting materials via treatment with sodium hydride, followed by incorporation of a prototypical MOF, HKUST‐1, to obtain composite sheets (MOF@PEO‐BTA‐Na) that retain the structural integrity of the original 2D polymer sheets. The 2D composite sheets can be assembled into self‐supporting membranes and used as a quasi‐solid‐state electrolyte (QSSE) with a remarkably high ionic conductivity value of 2.80 × 10 −3 S cm −1 and a Na + transference number of 0.95. Consequently, the QSSE facilitates uniform Na plating in Na//Na and Na//Cu cells. Na//NaTi 2 (PO 4 ) 3 cells containing MOF@PEO‐BTA‐Na QSSE exhibit a high initial specific capacity (129.1 mAh g −1 at 0.5 C), superior rate capability (60.0 mAh g −1 at 20 C), and high‐capacity retention (92% after 1000 cycles at 1 C). This work establishes a new, scalable approach for synthesizing 2D organic sheets with promising applications in energy‐related areas.
- 19 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e24650
Dynamic Microinterfacial Polymerization Enables Scalable Synthesis of Two‐Dimensional Polymer Sheets for Quasi‐Solid‐State Electrolytes in Sodium‐Metal Batteries
Organic two‐dimensional (2D) materials hold great potential in a broad range of applications. However, their practical utility is constrained by limited structural diversity and a lack of synthetic strategies. Herein, we report that simply stirring immiscible solutions of poly(propylene glycol)bis(2‐aminopropyl ether) and 1,3,5‐benzenetricarbonyl trichloride results in a dynamic microinterfacial polymerization that affords novel 2D polymer sheets (designated as PEO‐BTA). These sheets can be transformed to Na‐ion conducting materials via treatment with sodium hydride, followed by incorporation of a prototypical MOF, HKUST‐1, to obtain composite sheets (MOF@PEO‐BTA‐Na) that retain the structural integrity of the original 2D polymer sheets. The 2D composite sheets can be assembled into self‐supporting membranes and used as a quasi‐solid‐state electrolyte (QSSE) with a remarkably high ionic conductivity value of 2.80 × 10 −3 S cm −1 and a Na + transference number of 0.95. Consequently, the QSSE facilitates uniform Na plating in Na//Na and Na//Cu cells. Na//NaTi 2 (PO 4 ) 3 cells containing MOF@PEO‐BTA‐Na QSSE exhibit a high initial specific capacity (129.1 mAh g −1 at 0.5 C), superior rate capability (60.0 mAh g −1 at 20 C), and high‐capacity retention (92% after 1000 cycles at 1 C). This work establishes a new, scalable approach for synthesizing 2D organic sheets with promising applications in energy‐related areas.