LFLauren Thomson Fleming

Lauren Thomson Fleming

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lauren Thomson Fleming has a total of 75 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Light absorption and scattering properties of indole secondary organic aerosol prepared under various oxidant and relative humidity conditions

    by Vahe J. Baboomian, Quanfu He, Julia Montoya-Aguilera, Nabila Ali, Lauren T. Fleming, Peng Lin, Alexander Laskin, Julia Laskin, Yinon Rudich, Sergey A. Nizkorodov

    Secondary organic aerosol (SOA) from indole was produced in a smog chamber under different relative humidity (RH = 3, OH, OH + NOx, and NO3). The mass absorption coefficients were measured by extracting SOA in methanol and taking absorption spectra in the 200-700 nm range. Chromophoric compounds were tentatively identified by liquid chromatography – spectrophotometry – mass spectrometry. One of the strongest chromophores was nitroindole, produced in high abundance by both NO3 and OH + NOx oxidation. Indole SOA was also prepared in an oxidation flow reactor (OFR) using the same set of oxidants under variable RH conditions. Densities of the OFR-generated SOA particles ranged from 1.05 g/cm3 for indole + O3 SOA to 1.33 g/cm3 for indole + OH SOA. The real (n) and imaginary (k) refractive indices were quantified using a broadband cavity-enhanced spectrometer (BBCES) over the 360–425 nm spectral range. The values of k ranged from 10−2 to 10−1 at 405 nm, which is comparable to those for humic-like substances and at least an order of magnitude larger than k values of SOA produced from other biogenic and anthropogenic volatile organic compounds. The k values for the indole + NO3 SOA had a strong and non-monotonic dependence on RH, suggesting two competing reaction mechanisms for the chromophores, highlighting the complex effect of water on the absorption coefficient of SOA from heterocyclic aromatic precursors. Strong absorption of indole SOA may contribute to the degradation of visibility near its emission sources, which include animal husbandry facilities and stressed plants. Copyright © 2023 American Association for Aerosol Research


  • Top Cited Papers

    Extensive field evidence for the release of HONO from the photolysis of nitrate aerosols

    by Simone T. Andersen, Lucy J. Carpenter, Chris Reed, James D. Lee, Rosie Chance, Tomás Sherwen, Adam R. Vaughan, Jordan Stewart, Pete M. Edwards, William J. Bloss, et al.

    Particulate nitrate ( pNO 3 − ) has long been considered a permanent sink for NO x (NO and NO 2 ), removing a gaseous pollutant that is central to air quality and that influences the global self-cleansing capacity of the atmosphere. Evidence is emerging that photolysis of pNO 3 − can recycle HONO and NO x back to the gas phase with potentially important implications for tropospheric ozone and OH budgets; however, there are substantial discrepancies in “renoxification” photolysis rate constants. Using aircraft and ground-based HONO observations in the remote Atlantic troposphere, we show evidence for renoxification occurring on mixed marine aerosols with an efficiency that increases with relative humidity and decreases with the concentration of pNO 3 − , thus largely reconciling the very large discrepancies in renoxification photolysis rate constants found across multiple laboratory and field studies. Active release of HONO from aerosol has important implications for atmospheric oxidants such as OH and O 3 in both polluted and clean environments.


  • Emissions Measurements from Household Solid Fuel Use in Haryana, India: Implications for Climate and Health Co-benefits

    by Robert M. Weltman, Rufus D. Edwards, Lauren T. Fleming, Ankit Yadav, Cheryl L. Weyant, Brigitte Rooney, John H. Seinfeld, Narendra K. Arora, Tami C. Bond, Sergey A. Nizkorodov, et al.

    A large concern with estimates of climate and health co-benefits of “clean” cookstoves from controlled emissions testing is whether results represent what actually happens in real homes during normal use. A growing body of evidence indicates that in-field emissions during daily cooking activities differ substantially from values obtained in laboratories, with correspondingly different estimates of co-benefits. We report PM2.5 emission factors from uncontrolled cooking (n = 7) and minimally controlled cooking tests (n = 51) using traditional chulha and angithi stoves in village kitchens in Haryana, India. Minimally controlled cooking tests (n = 13) in a village kitchen with mixed dung and brushwood fuels were representative of uncontrolled field tests for fine particulate matter (PM2.5), organic and elemental carbon (p > 0.5), but were substantially higher than previously published water boiling tests using dung or wood. When the fraction of nonrenewable biomass harvesting, elemental, and organic particulate emissions and modeled estimates of secondary organic aerosol (SOA) are included in 100 year global warming commitments (GWC100), the chulha had a net cooling impact using mixed fuels typical of the region. Correlation between PM2.5 emission factors and GWC (R2 = 0.99) implies these stoves are climate neutral for primary PM2.5 emissions of 8.8 ± 0.7 and 9.8 ± 0.9 g PM2.5/kg dry fuel for GWC20 and GWC100, respectively, which is close to the mean for biomass stoves in global emission inventories.


  • Open Access

    Effect of aromatic ring substituents on the ability of catechol to produce brown carbon in iron( iii )-catalyzed reactions

    by Henry Chin, Katherine S. Hopstock, Lauren T. Fleming, Sergey A. Nizkorodov, Hind A. Al-Abadleh

    Our previous work demonstrated formation of highly insoluble and strongly light-absorbing organic particles in reactions between catechol or guaiacol with Fe( iii ) under pH = 3 conditions characteristic of aerosol liquid water.


  • Top Cited Papers
    Open Access

    Molecular composition and photochemical lifetimes of brown carbon chromophores in biomass burning organic aerosol

    by Lauren T. Fleming, Peng Lin, James M. Roberts, Vanessa Selimovic, Robert Yokelson, Julia Laskin, Alexander Laskin, Sergey A. Nizkorodov

    To better understand the effects of wildfires on air quality and climate, it is important to assess the occurrence of chromophoric compounds in smoke and characterize their optical properties. This study explores the molecular composition of light-absorbing organic aerosol, or brown carbon (BrC), sampled at the Missoula Fire Sciences laboratory as a part of the FIREX Fall 2016 lab intensive. A total of 12 biomass fuels from different plant types were tested, including gymnosperm (coniferous) and angiosperm (flowering) plants and different ecosystem components such as duff, litter, and canopy. Emitted biomass burning organic aerosol (BBOA) particles were collected onto Teflon filters and analyzed offline using high-performance liquid chromatography coupled to a photodiode array spectrophotometer and a high-resolution mass spectrometer (HPLC–PDA–HRMS). Separated BrC chromophores were classified by their retention times, absorption spectra, integrated absorbance in the near-UV and visible spectral range (300–700 nm), and chemical formulas from the accurate m∕z measurements. BrC chromophores were grouped into the following classes and subclasses: lignin-derived products, which include lignin pyrolysis products; distillation products, which include coumarins and flavonoids; nitroaromatics; and polycyclic aromatic hydrocarbons (PAHs). The observed classes and subclasses were common across most fuel types, although specific BrC chromophores varied based on plant type (gymnosperm or angiosperm) and ecosystem component(s) burned. To study the stability of the observed BrC compounds with respect to photodegradation, BBOA particle samples were irradiated directly on filters with near UV (300–400 nm) radiation, followed by extraction and HPLC–PDA–HRMS analysis. Lifetimes of individual BrC chromophores depended on the fuel type and the corresponding combustion condition. Lignin-derived and flavonoid classes of BrC generally had the longest lifetimes with respect to UV photodegradation. Moreover, lifetimes for the same type of BrC chromophores varied depending on biomass fuel and combustion conditions. While individual BrC chromophores disappeared on a timescale of several days, the overall light absorption by the sample persisted longer, presumably because the condensed-phase photochemical processes converted one set of chromophores into another without complete photobleaching or from undetected BrC chromophores that photobleached more slowly. To model the effect of BrC on climate, it is important to understand the change in the overall absorption coefficient with time. We measured the equivalent atmospheric lifetimes of the overall BrC absorption coefficient, which ranged from 10 to 41 d, with subalpine fir having the shortest lifetime and conifer canopies, i.e., juniper, having the longest lifetime. BrC emitted from biomass fuel loads encompassing multiple ecosystem components (litter, shrub, canopy) had absorption lifetimes on the lower end of the range. These results indicate that photobleaching of BBOA by condensed-phase photochemistry is relatively slow. Competing chemical aging mechanisms, such as heterogeneous oxidation by OH, may be more important for controlling the rate of BrC photobleaching in BBOA.


  • Open Access

    Supplementary material to "Molecular composition and photochemical lifetimes of brown carbon chromophores in biomass burning organic aerosol"

    by Lauren T. Fleming, Peng Lin, James M. Roberts, Vanessa Selimovic, Robert Yokelson, Julia Laskin, Alexander Laskin, Sergey A. Nizkorodov


  • Open Access

    Molecular composition and photochemical lifetimes of brown carbon chromophores in biomass burning organic aerosol

    by Lauren T. Fleming, Peng Lin, James M. Roberts, Vanessa Selimovic, Robert Yokelson, Julia Laskin, Alexander Laskin, Sergey A. Nizkorodov

    To better understand the effects of wildfires on air quality and climate, it is important to assess the occurrence of chromophoric compounds in smoke and characterize their optical properties. This study explores the molecular composition of light-absorbing organic aerosol, or brown carbon (BrC), sampled at the Missoula Fire Sciences laboratory as a part of the FIREX Fall 2016 lab intensive. Twelve biomass fuels from different plant types were tested, including gymnosperm (coniferous) and angiosperm (flowering) plants, and different ecosystem components such as duff, litter, and canopy. Emitted particles were collected onto Teflon filters and analyzed offline using high performance liquid chromatography/ photodiode array/high resolution mass spectrometry (HPLC/PDA/HRMS). Separated BrC chromophores were classified by their retention times, absorption spectra, integrated PDA absorbance in the near-UV and visible spectral range (300–700 nm), and chemical formulas from the accurate m/z measurements. BrC chromophores were grouped into the following classes and subclasses: lignin-derived, which includes lignin pyrolysis products; distillation products, which include coumarins and flavonoids; nitroaromatics; and polycyclic aromatic hydrocarbons (PAHs). The observed classes/subclasses were common across most fuel types, although specific BrC chromophores varied based on plant type (gymnosperm or angiosperm) and ecosystem component(s) burned. To study the stability of the observed BrC compounds with respect to photodegradation, biomass burning organic aerosol (BBOA) particle samples were irradiated directly on filters with near UV (300–400 nm) radiation, followed by extraction and the HPLC/PDA/HRMS analysis. Lifetimes of individual BrC chromophores depended on the fuel type and the corresponding combustion conditions, but lignin-derived and flavonoid classes of BrC generally had the longest lifetimes with respect to UV photodegradation. Moreover, lifetimes for the same type of BrC chromophores varied depending on biomass fuel and combustion conditions. While individual BrC chromophores disappeared on a timescale of several days, the overall light absorption by the sample persisted longer, presumably because the photolysis processes converted one set of chromophores into another without complete photobleaching, or from undetected BrC chromophores that photobleached more slowly. To model the effect of BrC on climate, it is important to understand the change in the absorption coefficient with time. We measured the equivalent atmospheric lifetimes of the overall BrC absorption coefficient which ranged from 10 to 41 days, with subalpine fir having the shortest lifetime, and conifer canopies having the longest. BrC emitted from biomass fuel loads encompassing multiple ecosystem components (litter, shrub, canopy) had absorption lifetimes on the lower end of the range. These results indicate that photobleaching by atmospheric photolysis is relatively slow. Other chemical aging mechanisms, such as heterogeneous oxidation by OH, may be more important for BrC degradation than photolysis for predicting the decay of BBOA BrC absorption in models.


  • Open Access

    Impacts of household sources on air pollution at village and regional scales in India

    by Brigitte Rooney, Ran Zhao, Yuan Wang, Kelvin H. Bates, Ajay Pillarisetti, Sumit Sharma, Seema Kundu, Tami C. Bond, Nicholas L. Lam, Bora Ozaltun, et al.

    Approximately 3 billion people worldwide cook with solid fuels, such as wood, charcoal, and agricultural residues. These fuels, also used for residential heating, are often combusted in inefficient devices, producing carbonaceous emissions. Between 2.6 and 3.8 million premature deaths occur as a result of exposure to fine particulate matter from the resulting household air pollution (Health Effects Institute, 2018a; World Health Organization, 2018). Household air pollution also contributes to ambient air pollution; the magnitude of this contribution is uncertain. Here, we simulate the distribution of the two major health-damaging outdoor air pollutants (PM2.5 and O3) using state-of-the-science emissions databases and atmospheric chemical transport models to estimate the impact of household combustion on ambient air quality in India. The present study focuses on New Delhi and the SOMAARTH Demographic, Development, and Environmental Surveillance Site (DDESS) in the Palwal District of Haryana, located about 80 km south of New Delhi. The DDESS covers an approximate population of 200 000 within 52 villages. The emissions inventory used in the present study was prepared based on a national inventory in India (Sharma et al., 2015, 2016), an updated residential sector inventory prepared at the University of Illinois, updated cookstove emissions factors from Fleming et al. (2018b), and PM2.5 speciation from cooking fires from Jayarathne et al. (2018). Simulation of regional air quality was carried out using the US Environmental Protection Agency Community Multiscale Air Quality modeling system (CMAQ) in conjunction with the Weather Research and Forecasting modeling system (WRF) to simulate the meteorological inputs for CMAQ, and the global chemical transport model GEOS-Chem to generate concentrations on the boundary of the computational domain. Comparisons between observed and simulated O3 and PM2.5 levels are carried out to assess overall airborne levels and to estimate the contribution of household cooking emissions. Observed and predicted ozone levels over New Delhi during September 2015, December 2015, and September 2016 routinely exceeded the 8 h Indian standard of 100 µg m−3, and, on occasion, exceeded 180 µg m−3. PM2.5 levels are predicted over the SOMAARTH headquarters (September 2015 and September 2016), Bajada Pahari (a village in the surveillance site; September 2015, December 2015, and September 2016), and New Delhi (September 2015, December 2015, and September 2016). The predicted fractional impact of residential emissions on anthropogenic PM2.5 levels varies from about 0.27 in SOMAARTH HQ and Bajada Pahari to about 0.10 in New Delhi. The predicted secondary organic portion of PM2.5 produced by household emissions ranges from 16 % to 80 %. Predicted levels of secondary organic PM2.5 during the periods studied at the four locations averaged about 30 µg m−3, representing approximately 30 % and 20 % of total PM2.5 levels in the rural and urban stations, respectively.


  • Formation of Light-Absorbing Organosulfates during Evaporation of Secondary Organic Material Extracts in the Presence of Sulfuric Acid

    by Lauren Thomson Fleming, Nujhat Nabila Ali, Sandra L. Blair, Marie Roveretto, Christian George, Sergey A. Nizkorodov


  • Open Access

    Impacts of Household Sources on Air Pollution at Village and Regional Scales in India

    by Brigitte Rooney, Ran Zhao, Kelvin H. Bates, Ajay Pillarisetti, Sumit Sharma, Seema Kundu, Tami C. Bond, Nicholas L. Lam, Bora Ozaltun, Li Xu, et al.

    Approximately 3 billion people worldwide cook with solid fuels, such as wood, charcoal, and agricultural residues. These fuels are often combusted in inefficient cookstoves, producing carbonaceous emissions. Between 2.6 and 3.8 million premature deaths occur as a result to exposure to fine particulate matter from the resulting household air pollution (Health Effects Institute, 2018a; World Health Organization, 2018). Household air pollution also contributes to ambient air pollution; the magnitude of this contribution is uncertain. Here, we simulate the distribution of the two major health-damaging outdoor air pollution species (PM2.5 and O3) using state-of-the-science emissions databases and atmospheric chemical transport models to estimate the impact of household combustion on ambient air quality in India. The present study focuses on New Delhi and the SOMAARTH Demographic, Development, and Environmental Surveillance Site (DDESS) in the Palwal District of Haryana, located about 80 km south of New Delhi. The DDESS covers an approximate population of 200 000 within 52 villages. The emissions inventory used in the present study was prepared based on a national inventory in India (Sharma et al., 2015, 2016), an updated residential sector inventory prepared at the University of Illinois, updated cookstove emissions factors from Fleming et al. (2018b), and PM2.5 speciation from cooking fires from Jayarathne et al. (2018). Simulation of regional air quality was carried out using the U.S. Environmental Protection Agency Community Multiscale Air Quality modeling system (CMAQ), in conjunction with the Weather Research and Forecasting modeling system (WRF) to simulate the meteorological inputs for CMAQ, and the global chemical transport model GEOS-Chem to generate concentrations on the boundary of the computational domain. Comparisons between observed and simulated O3 and PM2.5 levels are carried out to assess overall airborne levels and to estimate the contribution of household cooking emissions. Observed and predicted ozone levels over New Delhi during September 2015, December 2015, and September 2016 routinely exceeded 150 μg m−3, as compared with the 8-hour Indian standard of 100 μg m−3, and, on occasion, exceeded 200 μg m−3. PM2.5 levels are predicted over the SOMAARTH headquarters (September 2015 and September 2016), Bajada Pahari (a village in the surveillance site, September 2015, December 2015, and September 2016), and New Delhi (September 2015, December 2015, and September 2016). Predicted levels vary depending on the time of year but, on the whole, tend to be somewhat less than those observed. The predicted fractional impact of residential emissions on PM2.5 levels varies from about 0.30 in SOMAARTH HQ and Bajada Pahari to about 0.10 in New Delhi. Predicted levels of secondary organic PM2.5 during the periods studied at the three locations averaged about 5 μg m−3, representing approximately 10 % of total PM2.5 levels, accentuating the dominant role played by primary carbonaceous emissions in all three locations.