YSYosuke Sasama

Yosuke Sasama

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yosuke Sasama has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effective lateral isolation for hydrogen-terminated diamond field-effect transistors via nitrogen ion implantation

    by Koki Hino, Mohammad Monish, Yosuke Sasama, Kenji Sakamoto, Yamaguchi Takahide

    Field-effect transistors (FETs) based on hydrogen-terminated (H-terminated) diamond have attracted growing attention for their potential in power electronics and communication technologies. The conventional lateral isolation process in these FETs involves masking the conductive H-terminated regions with polymer resist or metal film, and then converting the unmasked regions into insulating oxygen-terminated diamond through oxygen plasma or other oxidizing treatments. However, this process carries a substantial risk of contaminating the H-terminated diamond surface with residues of the mask and its remover, which potentially degrades FET performance. Herein, we present a fundamentally different approach to lateral isolation in H-terminated diamond FETs through selective nitrogen ion implantation prior to the global H-termination. Electrical measurements confirm that the implanted regions remain highly resistive even after hydrogenation, providing effective and stable lateral isolation. Notably, H-termination is performed after ion implantation, which ensures a clean surface free from residues. This approach also facilitates fabrication of diamond FETs without exposing the hydrogenated surface to air, thus minimizing contamination from airborne impurities. Hence, the proposed lateral isolation technique offers a cleaner and more reliable pathway toward high-performance diamond-based electronic devices.


  • Enhanced channel mobility of hexagonal boron nitride/hydrogen-terminated diamond heterojunction field-effect transistor

    by Yosuke Sasama, Takuya Iwasaki, Masataka Imura, Kenji Watanabe, Takashi Taniguchi, Yamaguchi Takahide

    Hydrogen-terminated diamond field-effect transistors (FETs) using a hexagonal boron nitride (h-BN) gate insulator were fabricated on a diamond surface with reduced surface roughness in the direction of source/drain electrodes. The diamond surface was prepared on a mesa structure using chemical vapor deposition with a low methane concentration. The hydrogen-terminated surface was laminated with the h-BN gate insulator without air exposure to prevent the adsorption of atmospheric surface acceptors. The hydrogen-terminated diamond FET exhibited a high mobility of ≈1000 cm2 V−1 s−1 at room temperature. We performed theoretical analysis on the temperature and carrier density dependences of mobility, which suggested that Coulomb and surface roughness scattering were effectively reduced. The high mobility obtained in this study indicates the high potential of diamond as a semiconducting material. This study can contribute to the future development of diamond devices.


  • Self-aligned gate electrode for hydrogen-terminated diamond field-effect transistors with a hexagonal boron nitride gate insulator

    by Yosuke Sasama, Takuya Iwasaki, Mohammad Monish, Kenji Watanabe, Takashi Taniguchi, Yamaguchi Takahide

    Diamond electronic devices have attracted significant interest owing to their excellent semiconducting properties. We recently demonstrated that eliminating surface-transfer doping enhances carrier mobility and achieves normally off behavior in diamond field-effect transistors (FETs) with a hexagonal boron nitride (h-BN) gate insulator. In our previous study, the gate electrode was overlapped onto the source/drain electrodes to prevent the increase in access resistance caused by excluding surface-transfer doping. However, it is known that gate overlap increases parasitic capacitance and gate leakage current. In this study, we developed a technique for self-aligning the gate electrode with the edge of h-BN using oblique-angle deposition. The diamond FET with a self-aligned gate electrode exhibits optimal FET characteristics, including high mobility of ≈ 400 cm2V−1s−1, low sheet resistance of 2.4 kΩ, and output characteristics demonstrating pinch-off behavior. Furthermore, the capacitance-voltage characteristics clearly indicate distinct ON and OFF states, validating the efficacy of this technique. This method enables the fabrication of diamond/h-BN FETs with no gate overlap and without increasing access resistance, making it a promising approach for developing high-speed, low-loss diamond FETs with a wide range of applications.


  • Top Cited Papers

    High-mobility p-channel wide-bandgap transistors based on hydrogen-terminated diamond/hexagonal boron nitride heterostructures

    by Yosuke Sasama, Taisuke Kageura, Masataka Imura, Kenji Watanabe, Takashi Taniguchi, Takashi Uchihashi, Yamaguchi Takahide


  • Open Access

    Charge-carrier mobility in hydrogen-terminated diamond field-effect transistors

    by Yosuke Sasama, Taisuke Kageura, Katsuyoshi Komatsu, Satoshi Moriyama, Jun-Ichi Inoue, Masataka Imura, Kenji Watanabe, Takashi Taniguchi, Takashi Uchihashi, Yamaguchi Takahide

    Diamond field-effect transistors (FETs) have potential applications in power electronics and high-output high-frequency amplifications. In such applications, high charge-carrier mobility is desirable for a reduced loss and high-speed operation. We recently fabricated diamond FETs with a hexagonal-boron-nitride gate dielectric and observed a high mobility above 300 cm 2 V − 1 s − 1 . In this study, we identify the scattering mechanism that limits the mobility of our FETs through theoretical calculations. Our calculations reveal that dominant carrier scattering is caused by surface charged impurities with a density of ≈ 1 × 10 12 cm − 2 and suggest that an increase in mobility over 1000 cm 2 V − 1 s − 1 is possible by reducing these impurities.


  • Open Access

    Single-crystalline boron-doped diamond superconducting quantum interference devices with regrowth-induced step edge structure

    by Taisuke Kageura, Masakuni Hideko, Ikuto Tsuyuzaki, Aoi Morishita, Akihiro Kawano, Yosuke Sasama, Takahide Yamaguchi, Yoshihiko Takano, Minoru Tachiki, Shuuichi Ooi, et al.

    Superconducting quantum interference devices (SQUIDs) are currently used as magnetic flux detectors with ultra-high sensitivity for various applications such as medical diagnostics and magnetic material microstructure analysis. Single-crystalline superconducting boron-doped diamond is an excellent candidate for fabricating high-performance SQUIDs because of its robustness and high transition temperature, critical current density, and critical field. Here, we propose a fabrication process for a single-crystalline boron-doped diamond Josephson junction with regrowth-induced step edge structure and demonstrate the first operation of a single-crystalline boron-doped diamond SQUID above 2 K. We demonstrate that the step angle is a significant parameter for forming the Josephson junction and that the step angle can be controlled by adjusting the microwave plasma-enhanced chemical vapour deposition conditions of the regrowth layer. The fabricated junction exhibits superconductor–weak superconductor–superconductor-type behaviour without hysteresis and a high critical current density of 5800 A/cm2.


  • Open Access

    High-mobility diamond field effect transistor with a monocrystalline h-BN gate dielectric

    by Yosuke Sasama, Katsuyoshi Komatsu, Satoshi Moriyama, Masataka Imura, Tokuyuki Teraji, Kenji Watanabe, Takashi Taniguchi, Takashi Uchihashi, Yamaguchi Takahide

    Diamond is a wide bandgap semiconductor that can work at high temperatures and resist very high electric fields. It endures harsh environments through its physical stability and conducts heat very well. These properties make diamond suitable for the fabrication of unique electronic devices. In particular, diamond field effect transistors (FETs) have promising applications, including high-power converters for trains and electric vehicles and high-power high-frequency amplifiers for telecommunications and radar. Although high mobility is desirable for these applications, it has been difficult to achieve in diamond FETs particularly when the carrier density is high. The low mobility is most probably due to fixed and trapped charges in the non-ideal amorphous gate dielectric and at the dielectric/diamond interface. Here, we report on diamond FETs with monocrystalline hexagonal boron nitride (h-BN) as a gate dielectric. Thanks to the low density of charged impurities in monocrystalline h-BN, we obtained unprecedentedly high mobilities (>300 cm2 V−1 s−1) for moderately high carrier densities (>5 × 1012 cm−2). The resulting minimum sheet resistance was exceptionally low (<3 kΩ). Our results show that a heterostructure consisting of monocrystalline h-BN and diamond is an excellent platform with which to manufacture high-performance electronic devices.


  • Open Access

    Ionic-liquid-gating setup for stable measurements and reduced electronic inhomogeneity at low temperatures

    by Yamaguchi Takahide, Yosuke Sasama, Hiroyuki Takeya, Yoshihiko Takano, Taisuke Kageura, Hiroshi Kawarada

    The ionic-liquid-gating technique can be applied to the search for novel physical phenomena at low temperatures because of its wide controllability of the charge carrier density. Ionic-liquid-gated field-effect transistors are often fragile upon cooling, however, because of the large difference between the thermal expansion coefficients of frozen ionic liquids and solid target materials. In this paper, we provide a practical technique for setting up ionic-liquid-gated field-effect transistors for low-temperature measurements. It allows stable measurements and reduces the electronic inhomogeneity by reducing the shear strain generated in frozen ionic liquid.