Vipin Shrivastava
Research Subjects
Research Interests
Vipin Shrivastava has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Anil Singh Yadav
Bakhtiyarpur College of Engineering
7 shared publications - Pushpendra Singh
Indian Institute of Technology Ropar
5 shared publications - Vikas Kumar Thakur
Madhav Institute of Technology and Science
5 shared publications - Abhishek Sharma
Department of Mechanical Engineering, Government Engineering College Palamu (Department of Higher and Technical Education, Govt. of Jharkhand), Medininagar, India
4 shared publications - Anil Kumar
Department of Mechanical Engineering, Delhi Technological University, Delhi, India
4 shared publications Anil Singh Yadav
4 shared publications
Latest Publications
- Open Access
- 23 July 2026
- Published by Elsevier in SSRN Electronic Journal
Performance Enhancement of a Solar Still Using Matte Black Coated Rectangular Copper Fins and CuO Nanoparticles: An Experimental and Techno Economic Assessment
Solar desalination is a promising solution to freshwater scarcity, but conventional solar stills (CSS) suffer from low productivity. This study experimentally investigates a solar still integrated with matte black coated rectangular copper fins and CuO nanoparticles under tropical climatic conditions in India. Five operating configurations were examined, including a conventional solar still and four modified designs. Among all cases, the solar still incorporating black-coated copper fins and CuO nanoparticles (Case V) demonstrated the best performance. It achieved a freshwater productivity of 5.5 L/day and a diurnal energy efficiency of 55%. Compared with the conventional solar still, productivity increased by 128.03%, 172.73%, 206.82%, and 316.67% for Cases II, III, IV, and V, respectively. Economic and environmental analyses showed that Case V produced freshwater at the lowest cost of 1.63 INR/L, achieved a payback period of about one year, and mitigated 21.35 tons of CO2 over its lifetime. The enhanced performance is attributed to the combined effect of black-coated fins and CuO nanoparticles, which improve solar energy absorption, heat transfer, and evaporation. These results indicate that the proposed design is an efficient and cost-effective option for sustainable freshwater production.
- 23 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPerformance Enhancement of a Solar Still Using Matte Black Coated Rectangular Copper Fins and CuO Nanoparticles: An Experimental and Techno Economic Assessment
Solar desalination is a promising solution to freshwater scarcity, but conventional solar stills (CSS) suffer from low productivity. This study experimentally investigates a solar still integrated with matte black coated rectangular copper fins and CuO nanoparticles under tropical climatic conditions in India. Five operating configurations were examined, including a conventional solar still and four modified designs. Among all cases, the solar still incorporating black-coated copper fins and CuO nanoparticles (Case V) demonstrated the best performance. It achieved a freshwater productivity of 5.5 L/day and a diurnal energy efficiency of 55%. Compared with the conventional solar still, productivity increased by 128.03%, 172.73%, 206.82%, and 316.67% for Cases II, III, IV, and V, respectively. Economic and environmental analyses showed that Case V produced freshwater at the lowest cost of 1.63 INR/L, achieved a payback period of about one year, and mitigated 21.35 tons of CO2 over its lifetime. The enhanced performance is attributed to the combined effect of black-coated fins and CuO nanoparticles, which improve solar energy absorption, heat transfer, and evaporation. These results indicate that the proposed design is an efficient and cost-effective option for sustainable freshwater production.
- 30 June 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
Advancements in internet of things integrated solar thermal systems
This paper investigates how the Internet of Things (IoT) can transform solar thermal systems, which is a critical gap in the research because it offers a robust literature review of the integration of IoT since 2010 and 2024. This work is important because it has provided a detailed discussion on the role of IoT in improving real-time monitoring, automation, predictive maintenance, and energy management of photovoltaic panels, solar dryers, solar stills, and solar heaters. An approach of systematic review had been utilized, and more than 142 studies were analyzed to determine the trends, challenges and developments in the field. The findings show that there is a significant growth of the implementation of Solar PVT systems (5% in 2010 and 75% in 2024), energy efficiency, fault detection, and smart grid integration. Moreover, further IoT applications in the field of sustainable energy presence are shown by the development of AI-based optimization, remote access over the cloud, and P2P energy trading. Although these advantages exist, the task of cybersecurity risks, interoperability and high implementation costs still exist. This review brings forward the most efficient software products used in analyzing IoT-based solar, such as the MATLAB/Simulink, LabVIEW, and internet of things platforms, such as the Amazon Web Services (AWS) IoT and Google Cloud IoT. The results can be of great benefit to the researchers and industry participants, as the writers claim that more developments should be made in AI, blockchain security, and low-power IoT devices to fully utilize the potential of IoT in solar thermal use as part of the industry 4.0 model.
- 30 June 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
Advancements in internet of things integrated solar thermal systems
This paper investigates how the Internet of Things (IoT) can transform solar thermal systems, which is a critical gap in the research because it offers a robust literature review of the integration of IoT since 2010 and 2024. This work is important because it has provided a detailed discussion on the role of IoT in improving real-time monitoring, automation, predictive maintenance, and energy management of photovoltaic panels, solar dryers, solar stills, and solar heaters. An approach of systematic review had been utilized, and more than 142 studies were analyzed to determine the trends, challenges and developments in the field. The findings show that there is a significant growth of the implementation of Solar PVT systems (5% in 2010 and 75% in 2024), energy efficiency, fault detection, and smart grid integration. Moreover, further IoT applications in the field of sustainable energy presence are shown by the development of AI-based optimization, remote access over the cloud, and P2P energy trading. Although these advantages exist, the task of cybersecurity risks, interoperability and high implementation costs still exist. This review brings forward the most efficient software products used in analyzing IoT-based solar, such as the MATLAB/Simulink, LabVIEW, and internet of things platforms, such as the Amazon Web Services (AWS) IoT and Google Cloud IoT. The results can be of great benefit to the researchers and industry participants, as the writers claim that more developments should be made in AI, blockchain security, and low-power IoT devices to fully utilize the potential of IoT in solar thermal use as part of the industry 4.0 model.
- 15 May 2026
- Published by Elsevier in Solar Energy
- Vol. 314
Experimental characterization and simulation of solar drying process for Myrtus communis leaves optimization
- 15 May 2026
- Published by Elsevier in Solar Energy
- Vol. 314
Experimental characterization and simulation of solar drying process for Myrtus communis leaves optimization
- Open Access
- 17 October 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-21
An investigation of the effect of GMAW and SMAW processes on mechanical and microstructural properties of welded E350 grade steel
In the construction industry, power plants, shipbuilding, aerospace, automotive, oil and gas, and a wide variety of other industrial sectors, IS2062 steel is in high demand as a structural material. Gas metal arc welding (GMAW) process and shielded metal arc welding (SMAW) process, which are both traditional fusion arc welding methods, are utilised extensively for joining structural materials. This study presents the results of a comparative investigation into the mechanical properties and metallurgical characteristics of IS2062 E350 grade steel that has been fusion welded by GMAW and SMAW processes separately. Correlations were found between microstructures and the evaluation of tensile strength, impact strength and microhardness. Both GMAW and SMAW welded joints reached maximum transverse ultimate tensile strengths of 634 and 676 MPa, respectively. As an additional point of interest, the overall percentage of elongation for the GMAW and SMAW processes was 25.49% and 26.19%, respectively. Impact toughness of 235 J and 213 J was measured for joints that were created using GMAW and SMAW, respectively. When compared to other regions, the microhardness that was produced in the subcritical heat-affected zone was lower. The maximum microhardness obtained for GMAW and SMAW are 175 VHN and 185 VHN respectively. The investigation found that GMAW joints exhibited qualities that were somewhat better than those of SMAW joints. It has been discovered that the majority of weld failures occur in the subcritical heat affected zone. The reason behind these failures is that the weldment softens as a result of grain deformation.
- 17 October 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-21
Open AccessAn investigation of the effect of GMAW and SMAW processes on mechanical and microstructural properties of welded E350 grade steel
In the construction industry, power plants, shipbuilding, aerospace, automotive, oil and gas, and a wide variety of other industrial sectors, IS2062 steel is in high demand as a structural material. Gas metal arc welding (GMAW) process and shielded metal arc welding (SMAW) process, which are both traditional fusion arc welding methods, are utilised extensively for joining structural materials. This study presents the results of a comparative investigation into the mechanical properties and metallurgical characteristics of IS2062 E350 grade steel that has been fusion welded by GMAW and SMAW processes separately. Correlations were found between microstructures and the evaluation of tensile strength, impact strength and microhardness. Both GMAW and SMAW welded joints reached maximum transverse ultimate tensile strengths of 634 and 676 MPa, respectively. As an additional point of interest, the overall percentage of elongation for the GMAW and SMAW processes was 25.49% and 26.19%, respectively. Impact toughness of 235 J and 213 J was measured for joints that were created using GMAW and SMAW, respectively. When compared to other regions, the microhardness that was produced in the subcritical heat-affected zone was lower. The maximum microhardness obtained for GMAW and SMAW are 175 VHN and 185 VHN respectively. The investigation found that GMAW joints exhibited qualities that were somewhat better than those of SMAW joints. It has been discovered that the majority of weld failures occur in the subcritical heat affected zone. The reason behind these failures is that the weldment softens as a result of grain deformation.
- 25 August 2025
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 82
Advancements in computational tools for indirect solar drying systems: a comprehensive review
- 25 August 2025
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 82
Advancements in computational tools for indirect solar drying systems: a comprehensive review
- Open Access
- 23 June 2025
- Published by Elsevier in Desalination and Water Treatment
- Vol. 323
Performance assessment of passive solar still with different thermal energy storage materials
- 23 June 2025
- Published by Elsevier in Desalination and Water Treatment
- Vol. 323
Open AccessPerformance assessment of passive solar still with different thermal energy storage materials
- 17 March 2025
- Published by Springer Nature
- p. 51-64
Revisiting the Energy-Efficient Modified Solar Still
- 17 March 2025
- Published by Springer Nature
- p. 51-64
Revisiting the Energy-Efficient Modified Solar Still