Afshin Pendashteh
Research Subjects
Afshin Pendashteh has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Jesús Palma
Electrochemical Processes Unit, IMDEA Energy, Avda. Ramón de la Sagra 3, 28935 Móstoles, Madrid, Spain
10 shared publications Marc Anderson
Electrochemical Processes Unit
8 shared publications- Rebeca Marcilla
Electrochemical Processes Unit IMDEA Energy Móstoles Spain
8 shared publications Juan J. Vilatela
6 shared publications- Juan Jose Vilatela
IMDEA Materials Institute, Madrid, Spain
6 shared publications - Anastasiia Mikhalchan
IMDEA Materials Institute , Tecnogetafe. Eric Kandel, 2
3 shared publications
Latest Publications
- 2 December 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 512
High-power and high-energy zinc ion cathodes through embedded CNTs current collectors in vanadium oxide
- 2 December 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 512
High-power and high-energy zinc ion cathodes through embedded CNTs current collectors in vanadium oxide
- 2 October 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (12)
Paper‐Like 100 % Si Nanowires Electrodes Integrated with Argyrodite Li 6 PS 5 Cl Solid Electrolyte
Silicon anodes are a promising solution in all‐solid‐state batteries (ASSBs) due to minor lithium dendrite risk, high capacity, and low potential. Research on Si integration in ASSBs is still nascent, requiring a deep understanding of the interplay between electrode composition, structure, and performance. Here, we present the first study on 100 % Si nanowires integrated with Li 6 PS 5 Cl solid electrolyte (SE). The anodes are paper‐like networks of aggregated Si nanowires produced by a slurry‐free method without carbon/binders. Despite the lack of any conductor, the Si anodes provide >2.5 Ah/g capacity at a high mass loading of 1.7 mg/cm 2 (~5 mAh/cm 2 ), demonstrating sufficient electric and ionic conductivities. Electro‐chemo‐mechanical properties of the electrodes over (de)lithiation were probed through electrochemical impedance spectroscopy, ex‐situ microscopy, and in‐operando pressure regulation measurements. The lithiated electrode/SE interface was found to be electrochemically stable. Cross‐sectional microscopy at various states‐of‐charge confirmed the buffering effect of the anode porosity, resulting in the preservation of the electrode's thickness after the first lithiation but a considerable shrinkage during delithiation, producing cracking and formation of the new interface. Capacity remains constant for five cycles, then decreases linearly up to 40 cycles. This is attributed to repeated fracture of the anode/electrolyte interface and the corresponding impedance increase.
- 2 October 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (12)
Paper‐Like 100 % Si Nanowires Electrodes Integrated with Argyrodite Li 6 PS 5 Cl Solid Electrolyte
Silicon anodes are a promising solution in all‐solid‐state batteries (ASSBs) due to minor lithium dendrite risk, high capacity, and low potential. Research on Si integration in ASSBs is still nascent, requiring a deep understanding of the interplay between electrode composition, structure, and performance. Here, we present the first study on 100 % Si nanowires integrated with Li 6 PS 5 Cl solid electrolyte (SE). The anodes are paper‐like networks of aggregated Si nanowires produced by a slurry‐free method without carbon/binders. Despite the lack of any conductor, the Si anodes provide >2.5 Ah/g capacity at a high mass loading of 1.7 mg/cm 2 (~5 mAh/cm 2 ), demonstrating sufficient electric and ionic conductivities. Electro‐chemo‐mechanical properties of the electrodes over (de)lithiation were probed through electrochemical impedance spectroscopy, ex‐situ microscopy, and in‐operando pressure regulation measurements. The lithiated electrode/SE interface was found to be electrochemically stable. Cross‐sectional microscopy at various states‐of‐charge confirmed the buffering effect of the anode porosity, resulting in the preservation of the electrode's thickness after the first lithiation but a considerable shrinkage during delithiation, producing cracking and formation of the new interface. Capacity remains constant for five cycles, then decreases linearly up to 40 cycles. This is attributed to repeated fracture of the anode/electrolyte interface and the corresponding impedance increase.
- 26 August 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (76) , 10592-10595
Silicon nanowire aqueous dispersions for processing into macroscopic network materials
Outline for the production of self-standing SiNW networks via wet processing.
- 26 August 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (76) , 10592-10595
Silicon nanowire aqueous dispersions for processing into macroscopic network materials
Outline for the production of self-standing SiNW networks via wet processing.
- Open Access
- 14 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (12) , 14557-14565
Joule Heating in Controlled Atmospheres to Process Nanocarbon/Transition Metal Oxide Composites and Electrodes
Composites of nanocarbons and transition metal oxides combine excellent mechanical properties and high electrical conductivity with high capacitive active sites. These composites are promising for applications such as electrochemical energy conversion and storage, catalysis, and sensing. Here, we show that Joule heating can be used as a rapid out-of-oven thermal processing technique to crystallize the inorganic metal oxide matrix within a carbon nanotube fabric (CNTf) composite. We choose manganese oxide and vanadium oxide as model metal oxides and show that the Joule heating process is rapid and enables accurate control over the temperature and phase transitions. Next, we use thermogravimetric analysis and Joule heating experiments in controlled atmospheres to show that metal oxides can actually catalyze thermal degradation and reduce the thermal stability of the CNTs, which could limit processing of many oxides. We solve this by using a reducing hydrogen atmosphere to successfully extend the Joule processing window and thermal stability of the CNTf/metal oxide composite to ∼1000 °C.
- 14 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (12) , 14557-14565
Open AccessJoule Heating in Controlled Atmospheres to Process Nanocarbon/Transition Metal Oxide Composites and Electrodes
Composites of nanocarbons and transition metal oxides combine excellent mechanical properties and high electrical conductivity with high capacitive active sites. These composites are promising for applications such as electrochemical energy conversion and storage, catalysis, and sensing. Here, we show that Joule heating can be used as a rapid out-of-oven thermal processing technique to crystallize the inorganic metal oxide matrix within a carbon nanotube fabric (CNTf) composite. We choose manganese oxide and vanadium oxide as model metal oxides and show that the Joule heating process is rapid and enables accurate control over the temperature and phase transitions. Next, we use thermogravimetric analysis and Joule heating experiments in controlled atmospheres to show that metal oxides can actually catalyze thermal degradation and reduce the thermal stability of the CNTs, which could limit processing of many oxides. We solve this by using a reducing hydrogen atmosphere to successfully extend the Joule processing window and thermal stability of the CNTf/metal oxide composite to ∼1000 °C.
- 17 January 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (16)
Nanotextile 100% Si Anodes for the Next Generation Energy‐Dense Li‐ion Batteries
Combined with other materials and device improvements, Si anodes can provide a step change in Lithium‐ion battery properties, enabling cell energy density to exceed 400 Wh kg−1. Freestanding, large‐area anodes of 100% Si produced by a slurry‐free method without carbon or binders are introduced. Their structure, a dense network of interconnected high aspect ratio Si nanowires (Si NWs), is analogous to a nanotextile and provides handling like paper. In conventional liquid electrolytes, the anode capacity is 2500 mAh g−1 at high mass loadings (e.g., 6.6 mAh cm−2), and cycling stability is 76% after 200 deep cycles, and 100% after 1800 cycles when cycled at 1000 mAh g−1. The nanowire network structure reduces junction resistance between particles and prevents any pulverization upon cycling. Combined impedance and composition‐selective electron microscopy demonstrate that capacity fading is exclusively through the progressive increase of SEI thickness and resistance. Full cell capacity with NMC811 translates into an energy density of 420 Wh kg−1 at the true cell level.
- 17 January 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (16)
Nanotextile 100% Si Anodes for the Next Generation Energy‐Dense Li‐ion Batteries
Combined with other materials and device improvements, Si anodes can provide a step change in Lithium‐ion battery properties, enabling cell energy density to exceed 400 Wh kg−1. Freestanding, large‐area anodes of 100% Si produced by a slurry‐free method without carbon or binders are introduced. Their structure, a dense network of interconnected high aspect ratio Si nanowires (Si NWs), is analogous to a nanotextile and provides handling like paper. In conventional liquid electrolytes, the anode capacity is 2500 mAh g−1 at high mass loadings (e.g., 6.6 mAh cm−2), and cycling stability is 76% after 200 deep cycles, and 100% after 1800 cycles when cycled at 1000 mAh g−1. The nanowire network structure reduces junction resistance between particles and prevents any pulverization upon cycling. Combined impedance and composition‐selective electron microscopy demonstrate that capacity fading is exclusively through the progressive increase of SEI thickness and resistance. Full cell capacity with NMC811 translates into an energy density of 420 Wh kg−1 at the true cell level.
- 21 February 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (13) , 6052-6074
Gas-to-nanotextile: high-performance materials from floating 1D nanoparticles
Suspended in the gas phase, 1D inorganic nanoparticles (nanotubes and nanowires) grow to hundreds of microns in a second and can be thus directly assembled into freestanding network materials. The corresponding process continuously transforms gas precursors into aerosols into aerogels into macroscopic nanotextiles. By enabling the assembly of very high aspect ratio nanoparticles, this processing route has translated into high-performance structural materials, transparent conductors and battery anodes, amongst other embodiments. This paper reviews progress in the application of such manufacturing process to nanotubes and nanowires. It analyses 1D nanoparticle growth through floating catalyst chemical vapour deposition (FCCVD), in terms of reaction selectivity, scalability and its inherently ultra-fast growth rates (107–108 atoms per second) up to 1000 times faster than for substrate CVD. We summarise emerging descriptions of the formation of aerogels through percolation theory and multi-scale models for the collision and aggregation of 1D nanoparticles. The paper shows that macroscopic ensembles of 1D nanoparticles resemble textiles in their porous network structure, high flexibility and damage-tolerance. Their bulk properties depend strongly on inter-particle properties and are dominated by alignment and volume fraction. Selected examples of nanotextiles that surpass granular and monolithic materials include structural fibres with polymer-like toughness, transparent conductors, and slurry-free composite electrodes for energy storage.
- 21 February 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (13) , 6052-6074
Gas-to-nanotextile: high-performance materials from floating 1D nanoparticles
Suspended in the gas phase, 1D inorganic nanoparticles (nanotubes and nanowires) grow to hundreds of microns in a second and can be thus directly assembled into freestanding network materials. The corresponding process continuously transforms gas precursors into aerosols into aerogels into macroscopic nanotextiles. By enabling the assembly of very high aspect ratio nanoparticles, this processing route has translated into high-performance structural materials, transparent conductors and battery anodes, amongst other embodiments. This paper reviews progress in the application of such manufacturing process to nanotubes and nanowires. It analyses 1D nanoparticle growth through floating catalyst chemical vapour deposition (FCCVD), in terms of reaction selectivity, scalability and its inherently ultra-fast growth rates (107–108 atoms per second) up to 1000 times faster than for substrate CVD. We summarise emerging descriptions of the formation of aerogels through percolation theory and multi-scale models for the collision and aggregation of 1D nanoparticles. The paper shows that macroscopic ensembles of 1D nanoparticles resemble textiles in their porous network structure, high flexibility and damage-tolerance. Their bulk properties depend strongly on inter-particle properties and are dominated by alignment and volume fraction. Selected examples of nanotextiles that surpass granular and monolithic materials include structural fibres with polymer-like toughness, transparent conductors, and slurry-free composite electrodes for energy storage.
- Open Access
- 17 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (4) , 5590-5599
Processing of Composite Electrodes of Carbon Nanotube Fabrics and Inorganic Matrices via Rapid Joule Heating
Composites of nanocarbon network structures are interesting materials, combining mechanical properties and electrical conductivity superior to those of granular systems. Hence, they are envisaged to have applications as electrodes for energy storage and transfer. Here, we show a new processing route using Joule heating for a nanostructured network composite of carbon nanotube (CNT) fabrics and an inorganic phase (namely, MoS2), and then study the resulting structure and properties. To this end, first, a unidirectional fabric of conductive CNT bundles is electrochemically coated with MoS2. Afterward, the conformally coated inorganic phase is crystallized via heat generated by direct current passing through the CNT ensemble. The Joule heating process is rapid (maximum heating rate up to 31.7 °C/s), enables accurate temperature control, and takes only a few minutes. The resulting composite material combines a high electrical conductivity of up to 1.72 (±0.25) × 105 S/m, tensile modulus as high as 8.82 ± 5.5 GPa/SG, and an axial tensile strength up to 200 ± 58 MPa/SG. Both electrical and mechanical properties are orders of magnitude above those of wet-processed nanocomposites of similar composition. The extraordinary longitudinal properties stem from the network of interconnected and highly aligned CNT bundles. Conductivity and modulus follow approximately a rule of mixtures, similar to a continuous fiber composite, whereas strength scales almost quadratically with the mass fraction of the inorganic phase due to the inorganic constraining realignment of CNTs upon stretching. This processing route is applicable to a wide range of nanocarbon-based composites with inorganic phases, leading to composites with specific strength above steel and electrical conductivity beyond the threshold for electronic limitations in battery electrodes.
- 17 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (4) , 5590-5599
Open AccessProcessing of Composite Electrodes of Carbon Nanotube Fabrics and Inorganic Matrices via Rapid Joule Heating
Composites of nanocarbon network structures are interesting materials, combining mechanical properties and electrical conductivity superior to those of granular systems. Hence, they are envisaged to have applications as electrodes for energy storage and transfer. Here, we show a new processing route using Joule heating for a nanostructured network composite of carbon nanotube (CNT) fabrics and an inorganic phase (namely, MoS2), and then study the resulting structure and properties. To this end, first, a unidirectional fabric of conductive CNT bundles is electrochemically coated with MoS2. Afterward, the conformally coated inorganic phase is crystallized via heat generated by direct current passing through the CNT ensemble. The Joule heating process is rapid (maximum heating rate up to 31.7 °C/s), enables accurate temperature control, and takes only a few minutes. The resulting composite material combines a high electrical conductivity of up to 1.72 (±0.25) × 105 S/m, tensile modulus as high as 8.82 ± 5.5 GPa/SG, and an axial tensile strength up to 200 ± 58 MPa/SG. Both electrical and mechanical properties are orders of magnitude above those of wet-processed nanocomposites of similar composition. The extraordinary longitudinal properties stem from the network of interconnected and highly aligned CNT bundles. Conductivity and modulus follow approximately a rule of mixtures, similar to a continuous fiber composite, whereas strength scales almost quadratically with the mass fraction of the inorganic phase due to the inorganic constraining realignment of CNTs upon stretching. This processing route is applicable to a wide range of nanocarbon-based composites with inorganic phases, leading to composites with specific strength above steel and electrical conductivity beyond the threshold for electronic limitations in battery electrodes.
- Open Access
- 31 May 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (6) , 9583-9597
Highly Oriented Direct-Spun Carbon Nanotube Textiles Aligned by In Situ Radio-Frequency Fields
Carbon nanotubes (CNTs) individually exhibit exceptional physical properties, surpassing state-of-the-art bulk materials, but are used commercially primarily as additives rather than as a standalone macroscopic product. This limited use of bulk CNT materials results from the inability to harness the superb nanoscale properties of individual CNTs into macroscopic materials. CNT alignment within a textile has been proven as a critical contributor to narrow this gap. Here, we report the development of an altered direct CNT spinning method based on the floating catalyst chemical vapor deposition process, which directly interacts with the self-assembly of the CNT bundles in the gas phase. The setup is designed to apply an AC electric field to continuously align the CNTs in situ during the formation of CNT bundles and subsequent aerogel. A mesoscale CNT model developed to simulate the alignment process has shed light on the need to employ AC rather than DC fields based on a CNT stiffening effect (z-pinch) induced by a Lorentz force. The AC-aligned synthesis enables a means to control CNT bundle diameters, which broadened from 16 to 25 nm. The resulting bulk CNT textiles demonstrated an increase in the specific electrical and tensile properties (up to 90 and 460%, respectively) without modifying the quantity or quality of the CNTs, as verified by thermogravimetric analysis and Raman spectroscopy, respectively. The enhanced properties were correlated to the degree of CNT alignment within the textile as quantified by small-angle X-ray scattering and scanning electron microscopy image analysis. Clear alignment (orientational order parameter = 0.5) was achieved relative to the pristine material (orientational order parameter = 0.19) at applied field intensities in the range of 0.5-1 kV cm-1 at a frequency of 13.56 MHz.
- 31 May 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (6) , 9583-9597
Open AccessHighly Oriented Direct-Spun Carbon Nanotube Textiles Aligned by In Situ Radio-Frequency Fields
Carbon nanotubes (CNTs) individually exhibit exceptional physical properties, surpassing state-of-the-art bulk materials, but are used commercially primarily as additives rather than as a standalone macroscopic product. This limited use of bulk CNT materials results from the inability to harness the superb nanoscale properties of individual CNTs into macroscopic materials. CNT alignment within a textile has been proven as a critical contributor to narrow this gap. Here, we report the development of an altered direct CNT spinning method based on the floating catalyst chemical vapor deposition process, which directly interacts with the self-assembly of the CNT bundles in the gas phase. The setup is designed to apply an AC electric field to continuously align the CNTs in situ during the formation of CNT bundles and subsequent aerogel. A mesoscale CNT model developed to simulate the alignment process has shed light on the need to employ AC rather than DC fields based on a CNT stiffening effect (z-pinch) induced by a Lorentz force. The AC-aligned synthesis enables a means to control CNT bundle diameters, which broadened from 16 to 25 nm. The resulting bulk CNT textiles demonstrated an increase in the specific electrical and tensile properties (up to 90 and 460%, respectively) without modifying the quantity or quality of the CNTs, as verified by thermogravimetric analysis and Raman spectroscopy, respectively. The enhanced properties were correlated to the degree of CNT alignment within the textile as quantified by small-angle X-ray scattering and scanning electron microscopy image analysis. Clear alignment (orientational order parameter = 0.5) was achieved relative to the pristine material (orientational order parameter = 0.19) at applied field intensities in the range of 0.5-1 kV cm-1 at a frequency of 13.56 MHz.
- 10 December 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (1) , 55-64
Controlling reaction paths for ultra-fast growth of inorganic nanowires floating in the gas phase
Identification and understanding of selective growth parameters of 1D nanomaterials by floating catalysts chemical vapour deposition.
- 10 December 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (1) , 55-64
Controlling reaction paths for ultra-fast growth of inorganic nanowires floating in the gas phase
Identification and understanding of selective growth parameters of 1D nanomaterials by floating catalysts chemical vapour deposition.
- Open Access
- 28 May 2021
- Published by Wiley in Chemistry–Methods
- Vol. 1 (6) , 245
Cover Picture: Experimental Considerations for Operando Metal‐Ion Battery Monitoring using X‐ray Techniques (Chemistry ‐ Methods 6/2021)
- 28 May 2021
- Published by Wiley in Chemistry–Methods
- Vol. 1 (6) , 245
Open AccessCover Picture: Experimental Considerations for Operando Metal‐Ion Battery Monitoring using X‐ray Techniques (Chemistry ‐ Methods 6/2021)