SSSudarno Sudarno

Sudarno Sudarno

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sudarno Sudarno has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Wastewater Removal Pollutants Using Polyethylene terephthalate Media : Moving Bed Biofilm Reactor

    by Muliyadi Muliyadi, Purwanto Purwanto, Sri Sumiyati, Budiyono Budiyono, Sudarno Sudarno, Budi Warsito

    The increasing wastewater necessitates innovative wastewater treatment methods, such as anaerobic MBBR with PET as media, which enhance microbial degradation and biofilm formation. The aim was to analyze the rate of degradation kinetics in anaerobic MBBR reactors for biological wastewater treatment. This research examined three factors: the BOD, COD, and TSS. Domestic wastewater was used in this study. The reactor measured 40 × 40 × 50 cm and had a thickness of 4 mm. The construction was performed using glass material. The operation was performed for 30 days. Microorganisms grew and reproduced on the surface of the plastic bottle cap media during the anaerobic bioreactor seeding process by adding as many local microorganisms as 1.6/70 liters of wastewater. The study revealed that domestic wastewater used for wastewater treatment has BOD, COD, TSS, Ammonia, and Fat contents that exceed the set threshold value. The BOD/COD ratio was 0.55. After acclimatization, the biofilm was fully developed, effectively removing organic contaminants and producing fungal polysaccharides. In conclusion, the study of substrate concentration and degradation kinetics is crucial for system design and operation, emphasizing the need for substrate optimization to enhance microbial activity.

  • Open Access

    Preliminary Study of Methyl Orange Removal Using a Persulfate-Based Advanced Oxidation Process with Indonesian Palm Kernel Shell-Based Activated Carbon as an Activator: Experiment and Sorption-Oxidation Kinetic Analyses

    by Setiyono Setiyono, Heru Susanto, Sudarno Sudarno, Muhammad Abdul Kholiq, Veny Luvita, Rudi Nugroho, Nusa Idaman Said, Ahmad Shoiful, Nicolaus Nezha Nunez Mahasti, Nur Muhamad Fuad, et al.

    Two types of activated carbon (AC), namely Indonesian palm kernel shell-based AC (ZnCl2-AC) and commercial AC, were introduced to activate persulfate (PS) for catalytic degradation of methyl orange (MO) in water. This is the first attempt to apply the coupled sorption-oxidation kinetic model to the kinetic data of MO removal in the PS/AC system. The PS activated by AC removed more MO than the AC-only or PS activated by Fe2+. In the PS/AC system, to get maximum MO removal (100%), the use of commercial AC needed higher AC and PS dosages ([AC] = 185 mg L-1, and [PS] = 346 mg L-1) than the use of ZnCl2-AC ([AC] = 770 mg L-1, and [PS] = 1728 mg L-1). The MO removal in the PS/AC system fitted with the coupled sorption–oxidation kinetic model. Compared to the AC-only system, the PS/AC system enhanced the oxidation mechanism but depressed the sorption mechanism. The O2•– played a dominant role in the oxidation mechanism. The MO was degraded through demethylation, carboxylation, ring opening, azo bond breakage, asymmetric cleavage, and aromatic ring removal.


  • Open Access

    Effect of Heating Rates on the NiAl Alloy Using Molecular Dynamics Simulation

    by Ridwan Ridwan, Sudarno Sudarno, Wahidin Nuriana, Rizal Arifin

    Nickel–aluminum (NiAl) alloys appear to be remarkably resistant to heat and corrosion, and are used in heat-treatment furnaces. This study utilizes molecular dynamics simulations to explore the structural characteristics of a nickel–aluminum (NiAl) alloy at varying heating rates during the heating process. During the heating process, the temperature increases from 300 K to 4000 K, surpassing the melting point. The effect of the heating rate is varied at 93, 62, 46, and 37 K/ps. The findings indicate that both the potential energy and volume of the NiAl system rise as it undergoes heating. Moreover, at the temperature 4000 K, the local face-centered cubic (fcc) and hexagonal close-packed (hcp) structures in the NiAl exhibit variations depending on the heating rates. The results highlight the importance of accounting for heating rates in the structural evolution of NiAl showing their thermal behavior for high-temperature applications.

  • Bacterial community dynamics and pollutant removal mechanisms in biofilters: A literature review

    by Muliyadi Muliyadi, Purwanto Purwanto, Sri Sumiyati, Hadiyanto Hadiyanto, Sudarno Sudarno, Budiyono Budiyono, Budi Warsito

    Background: The lack of understanding of how pollutant removal occurs in biofilter reactors and bacterial community dynamics makes this worthy of study. This review explores biofiltration processes, commonly used biofilter types, bacterial community dynamics, and pollutant removal mechanisms in biofilters. Methods: This review used data from previous studies published on Scopus, EBSCO, and ProQuest, categorized into parameters such as the biofiltration process, types of biofilters, bacterial community dynamics, and pollutant removal mechanisms. The data were narrated, analyzed in a table, and presented in a review. Results: In the biofilter reactor, microorganisms cover the medium, allowing pollutants to flow through gaps and contact the biofilm layer. As the biofilm thickens, adhesion weakens, leading to new colonies. Submerged-bed biofilters, trickling filters, and packed column aeration and gasification systems effectively remove nutrients from aquatic environments. Biofilter bacterial communities are categorized by filter layer depth, with fast-growing, less specialized communities in the upper layer and more specialized communities in the bottom layer. Pollutant biodegradation depends on various factors such as nutrient availability, oxygen concentration, pH, bioavailability of contaminants, and physical and chemical characteristics of the biomass. Conclusion: A biofilter reactor uses microorganisms to cover a medium, allowing pollutants to flow through gaps and contact a biofilm layer that degrades organic compounds. Submerged-bed biofilters, trickling filters, and packed column aeration systems can effectively remove pollutants. Biofilter bacterial communities are categorized by filter layer depth, with fast-growing, less specialized communities in the upper layer, and more specialized communities in the bottom layer.


  • Open Access

    Mitigating the Drinking Water Crisis in Developing Regions: A Comprehensive Evaluation of Disinfection Technologies

    by Sudarno Sudarno, Mochamad Agung Wibowo, Pertiwi Andarini, Annisa Sila Puspita, Natasya Ghinna Humaira, Nadia Nursaidatina Arifah Putri

    Securing clean drinking water in developing countries is imperative for human survival, yet persistent challenges exist in cost implementation and technical operations. This paper aims to assess disinfection methods, with a focus on the efficacy of chlorination and ozonation in neutralizing...


  • Open Access

    Assessing the Environmental Implications of Water and Wastewater Production Using Life Cycle Assessment

    by Sudarno Sudarno, Mochamad Agung Wibowo, Pertiwi Andarini, Syahrul Al Qadar

    In the face of increasing global challenges, such as water scarcity, population growth, and environmental degradation, sustainable management of water resources and wastewater treatment is a major concern. However, sometimes missed regarding the potential impact of water system management on the...


  • Open Access

    Methods for Determining the Water Quality Index in Developing Asian Countries: A Review

    by Sudarno Sudarno, Mochamad Agung Wibowo, Pertiwi Andarini, Dionisius Veda Priya Kurniatama, Natasya Ghinna Humaira

    Clean water quality is a problem, especially for developing countries in Asia. Their efforts to maximize various sectors to become a developed country, for example in industrial activities, result in negative environmental impacts, especially for water quality. Wastewater that is directly...


  • Water Quality Index of Well Water in the Converted Agricultural Land

    by R. Prabowo, A. N. Bambang, S. Sudarno

    The groundwater condition at converted agricultural land has decreased water quality because of previous agricultural processes, so the water quality index is essential to know. This study aims to measure the groundwater quality index in residential wells on the converted agricultural land, determine the dominant parameters that form the Water Quality Index (WQI) in dug wells and drilled wells on the converted agricultural land, and determine the effect depth and age of wells on WQI. The research design was descriptive exploratory with WQI as the dependent variable and the depth and age of the well as the independent variable. With purposive sampling, 32 points of dug and drilled wells in different locations were chosen. Multiple linear regression was applied for data analysis. From the findings, it can be concluded that the minimum WQI value in dug well water is 76.9, and the average maximum WQI value in dug well water is 92.3. There are 8 points in dug well water with WQI in a good category or quality-2 category (71-90), and 15 dug well points have WQI in a very good quality category or quality-1 category (91-100). This value indicates that the dug well water quality in the research location is still classified as eligible for consumption. The dominant parameters that form WQI values in dug and drilled wells are manganese, cadmium, iron, with a value of -0.918 -0.886 -0.790. The depth and age of the well affect the water quality index. The depth of the well has a stronger effect on the water quality index than the age of the well.


  • Open Access

    Phytoremediation of Lead Contaminated Soil Using Croton (Cordiaeum variegatum) Plants

    by Lina Herlina, Budi Widianarko, Hartuti Purnaweni, Sudarno Sudarno, Henna Rya Sunoko

    The lead contamination of the environment affects the life of organisms, as the quality of the environment influences and determines the quality of living things, both plants and animals. Therefore, remediations need to be taken so that the polluted land could be repurposed for various activities...


  • Open Access

    ANALISIS STRUKTUR PERKERASAN JALAN MAGELANG-PURWOREJO KM 5

    by Sudarno Sudarno, Baehaki Abdulah, Oktana Dari Mukti, Aryandini Intan Pradipta, Lutfia Citra Ayu Rafika, Rheza Andrean Pramudita, Elmi Nur Sayekti

    Jalan Raya Magelang – Purworejo adalah jalan penghubung Kabupaten dan Kota Magelang dengan Kabupaten Purworejo. Jalan Raya Magelang – Purworejo memiliki beban lalu lintas yang tinggi menurut survei LHR yang dilakukan pada tahun 2017 sebanyak 6402 kendaraan. Penelitian yang dilakukan merupakan perhitungan tebal lapis perkerasan lentur jalan raya dengan metode Bina Marga 1987 dengan menggunakan data hasil uji Dynamic Cone Penetrometer. Perhitungan perencanaan overlay ini menggunakan laston MS 590 dimana data CBR lapangan rata-rata menggunakan Dynamic Cone Penetrometre (DCP) dengan ukuran konus 30o sebesar 33,6963. Kemudian dari data tersebut diperoleh nilai daya dukung tanah (DDT) sebesar 6 dan nilai LER lima tahun pertama 73,3132 dan untuk lima tahun kedua 176,9414. Dari hasil perhitungan keseluruhan diketahui bahwa tebal lapis permukaan sebesar 3 cm, lapis pondasi bawah menggunakan sirtu kelas B sebesar 10 cm.