HRHan Ren

Han Ren

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Han Ren has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Tunable 3 × 3 Nolen Matrix Network for Power-Saving Phased Array

    by Hanxiang Zhang, Han Ren, Powei Liu, Hao Yan, Bayaner Arigong

    In this article, a tunable Nolen matrix with small phase tuning range phase shifters and simple control is presented. The proposed circuit topology is constructed from 3 $\times$ 3 Nolen matrix embedded with three tunable phase shifters with small tuning range of 0 $^{\circ}$ –120 $^{\circ}$ . For each input port excitation in this proposed network, a continuous 120 $^{\circ}$ tunable progressive phase difference is obtained at the output ports, and the full 360 $^{\circ}$ tunable phase progression is achieved by exciting all three input ports. Most importantly, all tuning range relaxed phase shifters are controlled simultaneously by only two-channel dc voltages to achieve full progressive phase tuning range, which can simplify the control method of beam steering. Compared to the conventional feeding matrix, the proposed design achieves a flexible progressive phase, compact size, easy control, and low power consumption. The theoretical analysis is carried out for the proposed circuit topology, and the closed-form equations are derived to minimize the phase shifter’s tuning range and reduce the control complexity. To verify the proposed design concept, a prototype tunable Nolen matrix operating at 5.8 GHz is designed and tested, and the experimental results agree well with simulation and theoretical analysis.


  • A Fully Symmetrical Uni-Planar Microstrip Line Comparator Network for Monopulse Antenna

    by Hanxiang Zhang, Han Ren, Yixin Gu, Bayaner Arigong

    In this letter, a fully symmetrical uni-planar comparator network is proposed for monopulse antenna feeding. To break through the fundamental limitation of a conventional 180 $^{\circ}$ coupler (crossing between input and output ports and amplitude imbalance), a novel symmetric ports coupler is designed by cascading two identical 90 $^{\circ}$ couplers with two-phase delay lines, where the total phase delay of two lines is 180 $^{\circ}$ . To realize in planar structure, a zero-phase delay planar crossover is designed to resolve signal crossing between two stage couplers in a comparator network. To verify our design concept, a prototype monopulse array operating at 5.7 GHz is designed, fabricated, and measured, and results are aligned well with simulation and theory.


  • Open Access

    Tunable Metasurface With Dynamic Amplitude and Phase Control

    by Bowen Zheng, Han Ren, Sensong An, Hong Tang, Hang Li, Mohammad Haerinia, Yunxi Dong, Clayton Fowler, Hualiang Zhang

    Tunable metasurfaces are of great potential for the next-generation electromagnetic systems (e.g. beamforming systems due to the capabilities for ultra-fast reconfiguration speed and agile beam programming on the go). The fundamental aspects of tunable metasurfaces laid on their freedom in manipulating the phase and amplitude of the outgoing wavefront. However, the current research heavily focused on the phase manipulation while left the amplitude manipulation capabilities of the metasurfaces barely explored. To unlock the full potential of tunable metasurfaces, in this article, a novel tunable metasurface design with the capability to control both amplitude and phase of transmitted wavefront has been designed, simulated, and characterized experimentally. By incorporating individual phase and amplitude control modules under the guidance of equivalent circuit models, the proposed metasurface achieved the arbitrary phase and amplitude tuning while maintaining reasonably low physical profile. The measurement results of fabricated samples validated the design procedure and fulfilled the flexibility in terms of phase and amplitude tuning, also paved the way towards achieving more powerful dynamic metasurfaces.


  • Spectrum Aggregation Dual-Band Real-Time RF/Microwave Analog Signal Processing From Microstrip Line High-Frequency Hilbert Transformer

    by Rakibul Islam, Hedayatullah Maktoomi, Han Ren, Bayaner Arigong

    A uniplanar microstrip line RF/microwave real-time analog signal processing (RAP) units are proposed in this article to operate concurrently at two frequencies for spectrum aggregation applications. First, a fundamental building block novel microstrip line dual-band Hilbert transformer (DBHT) is developed by integrating a dual-band 180° coupler and a dual-band delay line (DBD). The theoretical analysis is carried out to determine the relation of coupler and delay line forming closed loop resonance in the proposed circuit topology. Then, a dual-band edge detector from DBHT and a dual-band single-sideband (DBSSB) modulator composed of dual-band power divider/combiner (DBPD/DBPC), DBHT, and DBD are developed for dual-band real-time RF/microwave signal processing. To verify the proposed concept, a prototype of microstrip line DBHT working at 0.9 and 1.98 GHz is designed, and the measurement and simulation agree well with theoretical analysis. To demonstrate the real-time RF/microwave analog signal processing, a dual-band edge detector composed of DBHT is verified in the experiment. Furthermore, a prototype of microstrip line DBSSB modulator is fabricated and validated in the experiment to demonstrate the real-time single-sideband modulation at two concurrent RF/microwave frequencies.


  • A patterned phase-changing vanadium dioxide film stacking with VO2 nanoparticle matrix for high performance energy-efficient smart window applications

    by Han Ren, Ouassal Hassna, Jie Li, Bayaner Arigong

    A vanadium dioxide (VO2) based solid-to-solid phased changing material has been attracting great interest in smart window applications. However, achieving high solar modulation and high transparency simultaneously in visible light is the major challenge for the practical application of this smart material. To resolve this issue, in this paper, a smart film composed of a VO2 nanoparticle matrix and a patterned VO2 film is presented. Numerical modeling and electromagnetic simulation are carried out to characterize the performance in terms of solar modulation and luminous transmittance, and a parametric study is carried out to optimize the proposed smart window film. Compared with the VO2 nanoparticle matrix, the proposed structure can obtain 23% solar modulation and 57% luminous transmittance but with a much thinner thickness, which will significantly reduce the cost and fabrication complexity and extend the environment stability.


  • A Wideband Isolated Real-to-Complex Impedance Transforming Uniplanar Microstrip Line Balun for Push–Pull Power Amplifier

    by Hedayatullah Maktoomi, Han Ren, Marvin N. Marbell, Victor Klein, Richard Wilson, Bayaner Arigong

    In this article, a three-port uniplanar microstrip line balun is proposed to transform the balanced complex load termination to 50-Ω unbalanced port impedance. The proposed device is designed based on a symmetric four-port network with an open-ended transmission line inserted between branch lines in the middle of structure. To improve the isolation and match the complex termination, a resistive network is proposed and inserted between the two balanced ports. In addition, the theoretical analysis is carried out for the even and odd mode circuits to expand the bandwidth of the proposed real-complex impedance transforming balun. With the proposed design theory, the impedance trajectory follower splitting and combining baluns are designed for wideband push-pull power amplifier (PPPA). To verify the design concept, first, a real-complex impedance transforming uniplanar microstrip line balun is designed and characterized at 1 GHz. Then, a prototype for the wideband PPPA with impedance trajectory follower microstrip baluns is designed, fabricated, and validated in experiment. For the proposed balun, the simulated and measured results agree well with each other to prove the design concept. From the experimental results, the PPPA with the proposed balun shows a gain of 10.2-12.2 dB, output power of 42.7-44.7 dBm, and a drain efficiency of 59.8%-74.6% within the frequency range of 1.8-2.7 GHz.


  • Phase Shifter-Relaxed and Control-Relaxed Continuous Steering Multiple Beamforming 4 × 4 Butler Matrix Phased Array

    by Han Ren, Peizhao Li, Yixin Gu, Bayaner Arigong

    A novel continuous tunable phase progression beamforming feeding network is proposed using 4x 4 Butler matrix and tunable phase shifters. To tune the progressive phase difference at the output ports of matrix network, four phase shifters (i.e. two phase shifters with 90° tuning range, and other two with 180° phase tuning range) are integrated within the Butler matrix. Two-channel digital voltages control all four phase shifters simultaneously to tune the phase difference in 90° range for each input excitation of the Butler matrix, and the 360° full range of the progressive phase difference is realized by switching four input ports. The theoretical analysis is carried out to reduce the number of the phase shifters as well as their phase tuning ranges, and the closed-form equations are derived to minimize the control complexity. To prove the design concept, a prototype of the proposed tunable Butler matrix is designed at 5.8 GHz, and the experimental results agree well with the simulation results to prove the design theory. Integrating with four patch antenna elements, the measured radiation beam is steered from -51° to 52° by tuning two control voltages.


  • A Symmetric Beam-Phased Array Fed by a Nolen Matrix Using 180° Couplers

    by Peizhao Li, Han Ren, Bayaner Arigong

    This letter presents a new microstrip line-phased array using 3 x 3 Nolen matrix - with three inputs and three output ports. For each input port excitation, the signal is divided into three equal magnitudes and unique progressive phase shifts at its output ports. The proposed microwave network is composed of three 180° couplers with two of them having identical coupling factors and two microstrip line-phase shifters. To verify the proposed design concept, a prototype of the feeding network working at 5.8 GHz is designed, fabricated, and measured. Both simulation and measurement results are in good agreement with the theoretical prediction.


  • Open Access

    Ultra‐compact 3 × 3 Nolen matrix beamforming network

    by Han Ren, Hanxiang Zhang, Bayaner Arigong

    A novel compact 3 × 3 Nolen matrix beamforming network is proposed in this study. Unlike the Butler matrix and Blass matrix, in this design, the proposed feeding network only requires couplers and phase shifters and removes crossovers and load terminations. To minimise the size, the authors’ proposed novel Nolen matrix is realised by lumped‐element couplers. First, the design theory for 3 × 3 Nolen matrix is derived, and the associated pyramidal layout consisting of three couplers with two coupling ratios and three‐phase shifters is proposed. Based on the determined topology, the S ‐parameters of the proposed feeding network and desired coupling ratios are derived, and it is found that the phase differences among the output ports are dependent on the characteristics of the couplers. Then, each coupler is realised by using lumped‐elements (including inductors and capacitors) in the proposed topologies, where the values of the elements are obtained by analysing the ABCD ‐matrix of the branch lines in the couplers. To verify the proposed concept, an experimental prototype working at 1 GHz is fabricated and tested. The simulation and measurement results agree well with each other, and an ultra‐compact size 0.17 λ × 0.06 λ is implemented to achieve more than 90% size reduction comparing with the previous designs.