Anders Robertsson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anders Robertsson has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Rolf Johansson
Lund University
22 shared publications - Anton S. Shiriaev
Department of Engineering Cybernetics NTNU Plass 2D O. S. Bragstads 7034 Trondheim Norway
5 shared publications - Klas Nilsson
Lund University
5 shared publications - Marcus Greiff
Mitsubishi Electric Research Laboratories (MERL), Cambridge, MA, USA
4 shared publications - Isolde Dressler
Dept. Computer Science, LTH, Lund University, Lund, Sweden
3 shared publications - Mathias Haage
Robotics and Semantic Systems, Department of Computer Science, Faculty of Engineering, Lund University, 221 00 Lund, Sweden
3 shared publications
Latest Publications
- Open Access
- 30 April 2023
- Published by Association for Computing Machinery (ACM)
- p. 3067-3076
DDPC: Automated Data-Driven Power-Performance Controller Design on-the-fly for Latency-sensitive Web Services
Traditional power reduction techniques such as DVFS or RAPL are challenging to use with web services because they significantly affect the services’ latency and throughput. Previous work suggested the use of controllers based on control theory or machine learning to reduce performance degradation under constrained power. However, generating these controllers is challenging as every web service applications running in a data center requires a power-performance model and a fine-tuned controller. In this paper, we present DDPC, a system for autonomic data-driven controller generation for power-latency management. DDPC automates the process of designing and deploying controllers for dynamic power allocation to manage the power-performance trade-offs for latency-sensitive web applications such as a social network. For each application, DDPC uses system identification techniques to learn an adaptive power-performance model that captures the application’s power-latency trade-offs which is then used to generate and deploy a Proportional-Integral (PI) power controller with gain-scheduling to dynamically manage the power allocation to the server running application using RAPL. We evaluate DDPC with two realistic latency-sensitive web applications under varying load scenarios. Our results show that DDPC is capable of autonomically generating and deploying controllers within a few minutes reducing the active power allocation of a web-server by more than 50% compared to state-of-the-art techniques while maintaining the latency well below the target of the application.
- 30 April 2023
- Published by Association for Computing Machinery (ACM)
- p. 3067-3076
Open AccessDDPC: Automated Data-Driven Power-Performance Controller Design on-the-fly for Latency-sensitive Web Services
Traditional power reduction techniques such as DVFS or RAPL are challenging to use with web services because they significantly affect the services’ latency and throughput. Previous work suggested the use of controllers based on control theory or machine learning to reduce performance degradation under constrained power. However, generating these controllers is challenging as every web service applications running in a data center requires a power-performance model and a fine-tuned controller. In this paper, we present DDPC, a system for autonomic data-driven controller generation for power-latency management. DDPC automates the process of designing and deploying controllers for dynamic power allocation to manage the power-performance trade-offs for latency-sensitive web applications such as a social network. For each application, DDPC uses system identification techniques to learn an adaptive power-performance model that captures the application’s power-latency trade-offs which is then used to generate and deploy a Proportional-Integral (PI) power controller with gain-scheduling to dynamically manage the power allocation to the server running application using RAPL. We evaluate DDPC with two realistic latency-sensitive web applications under varying load scenarios. Our results show that DDPC is capable of autonomically generating and deploying controllers within a few minutes reducing the active power allocation of a web-server by more than 50% compared to state-of-the-art techniques while maintaining the latency well below the target of the application.
- Open Access
- 17 April 2023
- Published by Springer Nature in Construction Robotics
- Vol. 7 (1) , 3-18
Insights into automation of construction process using parallel-kinematic manipulators
This article discusses challenges, experiences and lessons learned so far while transforming a masonry build system based mostly on manual labour into a robot automated build system. Our motivation for selection of this masonry process is to try out how robot automation could impact the architects in their design work by providing a tool to directly manipulate wall expression down to individual brick level. Such manipulation is often much too costly for manual labour today. Moreover, masonry is a challenging application to automate. Understanding the manual processes involved and transforming them into automation equivalents faces several challenges; among them handling and distribution of the different materials involved, selection of tooling, sensing for handling of variation and digital tooling for the programming of the process. A novel parallel-kinematic manipulator (PKM) with computerized numerical control (CNC) is used as target for experiments, because the performance properties in stiffness, workspace and accuracy will allow us to extend work into further construction processes involving heavy and dirty manual labour.
- 17 April 2023
- Published by Springer Nature in Construction Robotics
- Vol. 7 (1) , 3-18
Open AccessInsights into automation of construction process using parallel-kinematic manipulators
This article discusses challenges, experiences and lessons learned so far while transforming a masonry build system based mostly on manual labour into a robot automated build system. Our motivation for selection of this masonry process is to try out how robot automation could impact the architects in their design work by providing a tool to directly manipulate wall expression down to individual brick level. Such manipulation is often much too costly for manual labour today. Moreover, masonry is a challenging application to automate. Understanding the manual processes involved and transforming them into automation equivalents faces several challenges; among them handling and distribution of the different materials involved, selection of tooling, sensing for handling of variation and digital tooling for the programming of the process. A novel parallel-kinematic manipulator (PKM) with computerized numerical control (CNC) is used as target for experiments, because the performance properties in stiffness, workspace and accuracy will allow us to extend work into further construction processes involving heavy and dirty manual labour.
- Open Access
A Robust Observer with Gyroscopic Bias Correction for Rotational Dynamics
We propose an observer for rotational dynamics subject to directional and gyroscopic measurements, which simultaneously estimates the gyroscopic biases and attitude rates. We show uniform almost global asymptotic and local exponential stability of the resulting error dynamics, implying robustness against bounded disturbances. This robustness is quantified with respect to a popular nonlinear complementary filter in quantitative simulation studies, and we explore how the measurement noise propagates to the asymptotic errors as a function of tuning. This is an extended version of a paper with the same title (to appear at IFAC WC 2023). Additional mathematical details are provided in this extended version.
Open AccessA Robust Observer with Gyroscopic Bias Correction for Rotational Dynamics
We propose an observer for rotational dynamics subject to directional and gyroscopic measurements, which simultaneously estimates the gyroscopic biases and attitude rates. We show uniform almost global asymptotic and local exponential stability of the resulting error dynamics, implying robustness against bounded disturbances. This robustness is quantified with respect to a popular nonlinear complementary filter in quantitative simulation studies, and we explore how the measurement noise propagates to the asymptotic errors as a function of tuning. This is an extended version of a paper with the same title (to appear at IFAC WC 2023). Additional mathematical details are provided in this extended version.
- 22 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 6, 1250-1255
Target Localization and Circumnavigation With Integral Action in R²
Prior results on target localization and circumnavigation with bearing measurements in \mathbb R 2 are extended with integral action, resulting in a control system that is robust to bounded load disturbances on the control inputs. Such disturbances may arise in practice due to modeling errors and need to be considered to ensure small tracking errors. The control inputs are modeled as the system velocities in the bearing and orthogonal bearing directions, facilitating an implementation on both aerial and ground vehicles. This is demonstrated in a simulation example, followed by an experimental application with ground-based vehicle circumnavigation, highlighting the performance and importance of using the proposed controllers.
- 22 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 6, 1250-1255
Target Localization and Circumnavigation With Integral Action in R²
Prior results on target localization and circumnavigation with bearing measurements in \mathbb R 2 are extended with integral action, resulting in a control system that is robust to bounded load disturbances on the control inputs. Such disturbances may arise in practice due to modeling errors and need to be considered to ensure small tracking errors. The control inputs are modeled as the system velocities in the bearing and orthogonal bearing directions, facilitating an implementation on both aerial and ground vehicles. This is demonstrated in a simulation example, followed by an experimental application with ground-based vehicle circumnavigation, highlighting the performance and importance of using the proposed controllers.
- Open Access
- 5 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 6, 73-78
Attitude Control on SU(2): Stability, Robustness, and Similarities
This paper concerns trajectory tracking control of attitude dynamics configured on SU(2). Inspired by a popular geometric tracking controller on SO(3), differential geometric tools are used to derive both continuous and discontinuous attitude controllers on the SU(2) manifold, relating these to preexisting controllers operating with imaginary quaternion errors. Additionally, a robustness result is given for the controllers on SU(2), which is illustrated by simulation examples.
- 5 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 6, 73-78
Open AccessAttitude Control on SU(2): Stability, Robustness, and Similarities
This paper concerns trajectory tracking control of attitude dynamics configured on SU(2). Inspired by a popular geometric tracking controller on SO(3), differential geometric tools are used to derive both continuous and discontinuous attitude controllers on the SU(2) manifold, relating these to preexisting controllers operating with imaginary quaternion errors. Additionally, a robustness result is given for the controllers on SU(2), which is illustrated by simulation examples.
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 5764-5770
Filtered Output Feedback Tracking Control of a Quadrotor UAV
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 5764-5770
Filtered Output Feedback Tracking Control of a Quadrotor UAV
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 2489-2494
Coordination Control of Double-Integrator Systems with Time-Varying Weighted Inputs
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 2489-2494
Coordination Control of Double-Integrator Systems with Time-Varying Weighted Inputs
- 24 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 16 (2) , 972-983
Model Predictive Control for Real-Time Point-to-Point Trajectory Generation
The problem of planning a trajectory for robots starting in an initial state and reaching a final state in a desired interval of time is tackled. We propose an approach based on model predictive control to solve the problem of point-to-point trajectory generation for a given final time. We discuss various choices of models, objective functions, and constraints for generating trajectories to transfer the state of the robot, while respecting physical limitations on the motion as well as fulfilling computational real-time requirements. Extensive simulation results illustrate the use of the approach, and experiments on an industrial robot in a challenging ball-catching task show the effectiveness of the approach also in demanding scenarios with real-time constraints on the computation.
- 24 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 16 (2) , 972-983
Model Predictive Control for Real-Time Point-to-Point Trajectory Generation
The problem of planning a trajectory for robots starting in an initial state and reaching a final state in a desired interval of time is tackled. We propose an approach based on model predictive control to solve the problem of point-to-point trajectory generation for a given final time. We discuss various choices of models, objective functions, and constraints for generating trajectories to transfer the state of the robot, while respecting physical limitations on the motion as well as fulfilling computational real-time requirements. Extensive simulation results illustrate the use of the approach, and experiments on an industrial robot in a challenging ball-catching task show the effectiveness of the approach also in demanding scenarios with real-time constraints on the computation.
- Open Access
Using a Predator-Prey Model to Explain Variations of Cloud Spot Price
The spot pricing scheme has been considered to be resource-efficient for providers and cost-effective for consumers in the Cloud market. Nevertheless, unlike the static and straightforward strategies of trading on-demand and reserved Cloud services, the market-driven mechanism for trading spot service would be complicated for both implementation and understanding. The largely invisible market activities and their complex interactions could especially make Cloud consumers hesitate to enter the spot market. To reduce the complexity in understanding the Cloud spot market, we decided to reveal the backend information behind spot price variations. Inspired by the methodology of reverse engineering, we developed a Predator-Prey model that can simulate the interactions between demand and resource based on the visible spot price traces. The simulation results have shown some basic regular patterns of market activities with respect to Amazon's spot instance type m3.large. Although the findings of this study need further validation by using practical data, our work essentially suggests a promising approach (i.e.~using a Predator-Prey model) to investigate spot market activities.
Open AccessUsing a Predator-Prey Model to Explain Variations of Cloud Spot Price
The spot pricing scheme has been considered to be resource-efficient for providers and cost-effective for consumers in the Cloud market. Nevertheless, unlike the static and straightforward strategies of trading on-demand and reserved Cloud services, the market-driven mechanism for trading spot service would be complicated for both implementation and understanding. The largely invisible market activities and their complex interactions could especially make Cloud consumers hesitate to enter the spot market. To reduce the complexity in understanding the Cloud spot market, we decided to reveal the backend information behind spot price variations. Inspired by the methodology of reverse engineering, we developed a Predator-Prey model that can simulate the interactions between demand and resource based on the visible spot price traces. The simulation results have shown some basic regular patterns of market activities with respect to Amazon's spot instance type m3.large. Although the findings of this study need further validation by using practical data, our work essentially suggests a promising approach (i.e.~using a Predator-Prey model) to investigate spot market activities.
- Open Access
- 1 November 2016
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 353 (16) , 4213-4232
Observer-based strictly positive real (SPR) variable structure output feedback control
- 1 November 2016
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 353 (16) , 4213-4232
Open AccessObserver-based strictly positive real (SPR) variable structure output feedback control