Bipin Kumar Singh
Bipin Kumar Singh has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Praveen C. Pandey
Department of Physics, Indian Institute of Technology (BHU), Varanasi, India
3 shared publications- Praveen Chandra Pandey
Department of Physics, Indian Institute of Technology (BHU), Varanasi 221005, India
3 shared publications Ashutosh K. Dikshit
Department of Electronics and Communications, VFSTR, Guntur, India
2 shared publicationsVaishali Bambole
Department of Physics, University of Mumbai, Mumbai, India
2 shared publicationsVipul Rastogi
Physics, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand, INDIA
2 shared publicationsAshish Bijalwan
Physics, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand, INDIA
1 shared publication
Latest Publications
- 2 August 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (8) , 1-15
Effect of plasmonic nanorods to enhance the absorption and photocurrent density in silicon solar cells
- 2 August 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (8) , 1-15
Effect of plasmonic nanorods to enhance the absorption and photocurrent density in silicon solar cells
- 1 February 2025
- Published by Springer Nature in Plasmonics
- p. 1-18
Engineering of Ultra-wide Bandwidth Metamaterial Absorber with Various Shaped Resonators in the Visible to Far-Infrared Spectrum
- 1 February 2025
- Published by Springer Nature in Plasmonics
- p. 1-18
Engineering of Ultra-wide Bandwidth Metamaterial Absorber with Various Shaped Resonators in the Visible to Far-Infrared Spectrum
- 27 September 2022
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 54 (11) , 1-19
Consequence of Fibonacci quasiperiodic sequences in 1-D photonic crystal refractive index sensor for the blood plasma and cancer cells detections
- 27 September 2022
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 54 (11) , 1-19
Consequence of Fibonacci quasiperiodic sequences in 1-D photonic crystal refractive index sensor for the blood plasma and cancer cells detections
- Open Access
- 24 May 2022
- Published by Springer Nature in Research Square
Consequence of Fibonacci quasiperiodic sequences in 1-D photonic crystal refractive index sensor for the blood plasma and cancer cells detections
We present the consequences of different Fibonacci quasiperiodic sequences on the sensing performance of a one-dimensional (1D) photonic crystal (PC) based sensor to detect the blood plasma and cancer cells. We demonstrate that the sensitivity and figure of merit (FOM) of the sensor can be modulated, respectively, from 427.5 nm/RIU to 530 nm/RIU and from 162.5 RIU− 1 to 2983.33 RIU− 1 by utilizing the pertinent sensor structures with Fibonacci generation and structural parameters for the analyte refractive index from 1.31 to 1.41. We have also shown that the operational sensing wavelengths and sensitivity can be changed significantly by introducing the different Fibonacci sequences in the proposed sensor. The sensing peaks separation, FWHM, and sensitivity can also be tuned by changing the analyte and PC stacked layers' thicknesses. We also introduce the sensing performances for the Blood plasma and Cancer cells detection using the proposed Fibonacci quasiperiodic PC sensor. We observe that the maximum sensitivities and FOM of the proposed sensor are 552.5 nm/RIU and 2986.93 RIU− 1 for cancer cells and 553.55 nm/RIU and 2214.21 RIU− 1 for blood plasma, respectively. The proposed structure reveals the tunable sensing performances and stimulates the fabrication interest.
- 24 May 2022
- Published by Springer Nature in Research Square
Open AccessConsequence of Fibonacci quasiperiodic sequences in 1-D photonic crystal refractive index sensor for the blood plasma and cancer cells detections
We present the consequences of different Fibonacci quasiperiodic sequences on the sensing performance of a one-dimensional (1D) photonic crystal (PC) based sensor to detect the blood plasma and cancer cells. We demonstrate that the sensitivity and figure of merit (FOM) of the sensor can be modulated, respectively, from 427.5 nm/RIU to 530 nm/RIU and from 162.5 RIU− 1 to 2983.33 RIU− 1 by utilizing the pertinent sensor structures with Fibonacci generation and structural parameters for the analyte refractive index from 1.31 to 1.41. We have also shown that the operational sensing wavelengths and sensitivity can be changed significantly by introducing the different Fibonacci sequences in the proposed sensor. The sensing peaks separation, FWHM, and sensitivity can also be tuned by changing the analyte and PC stacked layers' thicknesses. We also introduce the sensing performances for the Blood plasma and Cancer cells detection using the proposed Fibonacci quasiperiodic PC sensor. We observe that the maximum sensitivities and FOM of the proposed sensor are 552.5 nm/RIU and 2986.93 RIU− 1 for cancer cells and 553.55 nm/RIU and 2214.21 RIU− 1 for blood plasma, respectively. The proposed structure reveals the tunable sensing performances and stimulates the fabrication interest.
- Open Access
- 10 October 2019
- Published by IOP Publishing in Engineering Research Express
- Vol. 1 (2) , 025004
Photonic bandgaps engineering in double graded hyperbolic, exponential and linear index materials embedded one-dimensional photonic crystals
We present the structuring of different double graded-index materials in the form of one-dimensional (1D) photonic crystals (PCs) for highly efficient light trapping and controlling photonic devices in terms of tuned and controlled photonic bandgap (PBG) performances. Considered 1D graded photonic crystal (GPC) structures are stacked of hyperbolic, exponential, and linear double graded index layers. In the graded index layers, the refractive indices vary in hyperbolic, exponential, and linear fashions as a function of the layer thickness. These configurations show that the operating frequencies and the number of PBGs can be tuned by controlling layer thickness, grading profiles, and grading parameters of the constituted graded layers. The changes in the grading profiles of the graded layers modulate the operation frequencies and also the number of PBGs. We also found that the operating frequencies and bandwidth of PBGs can be tuned by changing the values of initial and final refractive indices of the graded layer. Therefore, the desirable PBG regions and bandwidths can be achieved and controlled by selecting appropriate parameters of the systems. Results can be implemented to design tunable reflectors, multi-channel filters, sensors, and optical detectors. Also, this work may provide an understanding of the effect of different double graded-index materials on PBG characteristics in the GPCs.
- 10 October 2019
- Published by IOP Publishing in Engineering Research Express
- Vol. 1 (2) , 025004
Open AccessPhotonic bandgaps engineering in double graded hyperbolic, exponential and linear index materials embedded one-dimensional photonic crystals
We present the structuring of different double graded-index materials in the form of one-dimensional (1D) photonic crystals (PCs) for highly efficient light trapping and controlling photonic devices in terms of tuned and controlled photonic bandgap (PBG) performances. Considered 1D graded photonic crystal (GPC) structures are stacked of hyperbolic, exponential, and linear double graded index layers. In the graded index layers, the refractive indices vary in hyperbolic, exponential, and linear fashions as a function of the layer thickness. These configurations show that the operating frequencies and the number of PBGs can be tuned by controlling layer thickness, grading profiles, and grading parameters of the constituted graded layers. The changes in the grading profiles of the graded layers modulate the operation frequencies and also the number of PBGs. We also found that the operating frequencies and bandwidth of PBGs can be tuned by changing the values of initial and final refractive indices of the graded layer. Therefore, the desirable PBG regions and bandwidths can be achieved and controlled by selecting appropriate parameters of the systems. Results can be implemented to design tunable reflectors, multi-channel filters, sensors, and optical detectors. Also, this work may provide an understanding of the effect of different double graded-index materials on PBG characteristics in the GPCs.
- 25 September 2018
- Published by Optica Publishing Group in Applied Optics
- Vol. 57 (28) , 8171-8181
Tunable temperature-dependent THz photonic bandgaps and localization mode engineering in 1D periodic and quasi-periodic structures with graded-index materials and InSb
We present the tunability of terahertz (THz) photonic bandgaps and localization modes in one-dimensional (1D) periodic and quasi-periodic structures based on alternating layers of graded-index materials and InSb. These configurations show that operation frequencies of photonic bands and localization modes can be tuned by controlling temperature, structural and grading parameters, grading profiles, and different quasi-periodic arrangements. The number of photonic bands and localization modes can also be modulated with layer thickness and quasi-periodic arrangements. Changes in the grouping of the materials considered also modulate the operation frequencies of photonic bands and localization modes in quasi-periodic structures. Results can be implemented to design thermo-tunable THz filters, reflectors, sensors, etc.
- 25 September 2018
- Published by Optica Publishing Group in Applied Optics
- Vol. 57 (28) , 8171-8181
Tunable temperature-dependent THz photonic bandgaps and localization mode engineering in 1D periodic and quasi-periodic structures with graded-index materials and InSb
We present the tunability of terahertz (THz) photonic bandgaps and localization modes in one-dimensional (1D) periodic and quasi-periodic structures based on alternating layers of graded-index materials and InSb. These configurations show that operation frequencies of photonic bands and localization modes can be tuned by controlling temperature, structural and grading parameters, grading profiles, and different quasi-periodic arrangements. The number of photonic bands and localization modes can also be modulated with layer thickness and quasi-periodic arrangements. Changes in the grouping of the materials considered also modulate the operation frequencies of photonic bands and localization modes in quasi-periodic structures. Results can be implemented to design thermo-tunable THz filters, reflectors, sensors, etc.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1953 (1) , 060038
Tunability of temperature dependent THz photonic band gaps in 1-D photonic crystals composed of graded index materials and semiconductor InSb
Tunable temperature dependent terahertz photonic band gaps (PBGs) in one-dimensional (1-D) photonic crystal composed of alternating layers of graded index and semiconductor materials are demonstrated. Results show the influence of temperature, geometrical parameters, grading profile and material damping factor on the PBGs. Number of PBG increases with increasing the layer thickness and their bandwidth can be tuned with external temperature and grading parameters. Lower order band gap is more sensitive to the temperature which shows increasing trend with temperature, and higher order PBGs can also be tuned by controlling the external temperature. Band edges of PBGs are shifted toward higher frequency side with increasing the temperature. Results show that the operational frequencies of PBGs are unaffected when loss involved. This work enables to design tunable Temperature dependent terahertz photonic devices such as reflectors, sensors and filters etc.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1953 (1) , 060038
Tunability of temperature dependent THz photonic band gaps in 1-D photonic crystals composed of graded index materials and semiconductor InSb
Tunable temperature dependent terahertz photonic band gaps (PBGs) in one-dimensional (1-D) photonic crystal composed of alternating layers of graded index and semiconductor materials are demonstrated. Results show the influence of temperature, geometrical parameters, grading profile and material damping factor on the PBGs. Number of PBG increases with increasing the layer thickness and their bandwidth can be tuned with external temperature and grading parameters. Lower order band gap is more sensitive to the temperature which shows increasing trend with temperature, and higher order PBGs can also be tuned by controlling the external temperature. Band edges of PBGs are shifted toward higher frequency side with increasing the temperature. Results show that the operational frequencies of PBGs are unaffected when loss involved. This work enables to design tunable Temperature dependent terahertz photonic devices such as reflectors, sensors and filters etc.
- 4 November 2015
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 63 (9) , 826-834
Photonic and omnidirectional band gap engineering in stack of exponential graded index material and negative index material
We have investigated the photonic band gaps (PBG) and omnidirectional band gaps in one-dimensional photonic crystals made up of alternate layer of exponential graded index material and negative index material. We have considered the influence of material properties, geometrical parameters and material composition on the PBG and omnidirectional band gap. Results show that the parameters of exponential graded index material and negative index material can change the photonic and omnidirectional band structures remarkably. Number and bandwidth of PBG increases with increasing the negative index material layer thicknesses while thicknesses of graded index layer only have an effect on the bandwidth of PBGs. The bandwidth of PBG also depends on grading profile parameter of exponential graded index layers and bandwidth can be tuned with increase the value of grading profile parameter. This work can facilitate the design of filters and reflectors, and provide the basic understanding of the influence of graded index materials and metamaterials on the PBG properties.
- 4 November 2015
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 63 (9) , 826-834
Photonic and omnidirectional band gap engineering in stack of exponential graded index material and negative index material
We have investigated the photonic band gaps (PBG) and omnidirectional band gaps in one-dimensional photonic crystals made up of alternate layer of exponential graded index material and negative index material. We have considered the influence of material properties, geometrical parameters and material composition on the PBG and omnidirectional band gap. Results show that the parameters of exponential graded index material and negative index material can change the photonic and omnidirectional band structures remarkably. Number and bandwidth of PBG increases with increasing the negative index material layer thicknesses while thicknesses of graded index layer only have an effect on the bandwidth of PBGs. The bandwidth of PBG also depends on grading profile parameter of exponential graded index layers and bandwidth can be tuned with increase the value of grading profile parameter. This work can facilitate the design of filters and reflectors, and provide the basic understanding of the influence of graded index materials and metamaterials on the PBG properties.
- Open Access
- 1 November 2004
- Published by SAGE Publications in Journal of Chemical Research
- Vol. 2004 (11) , 760-761
Microwave-Assisted Coupling of Carbonyl Compound: An Efficient Synthesis of Olefin
Self-coupling of various ketones and aldehyde as well as mixed coupling of ketones employing TiCl4/ Zn under microwave irradiation has been carried out to afford the corresponding olefins.
- 1 November 2004
- Published by SAGE Publications in Journal of Chemical Research
- Vol. 2004 (11) , 760-761
Open AccessMicrowave-Assisted Coupling of Carbonyl Compound: An Efficient Synthesis of Olefin
Self-coupling of various ketones and aldehyde as well as mixed coupling of ketones employing TiCl4/ Zn under microwave irradiation has been carried out to afford the corresponding olefins.