Monique Head
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Monique Head has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Mehdi Shokouhian
Department of Civil and Environmental Engineering, Center for the Built Environment and Infrastructure Studies (CBEIS), Morgan State University, Baltimore, MD 21251, USA
13 shared publications - Vahid Bisadi
Graduate Assistant Researcher, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX 77843-3136
7 shared publications John B. Mander
Inaugural Zachry Professor I, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX 77843-3136
6 shared publications- Alemu Mosisa Legese
Department of Civil, Construction, and Environmental Engineering, University of Delaware, Newark, DE 19716, USA
5 shared publications - Thomas J. Mander
Graduate Assistant Researcher, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX 77843-3136
5 shared publications Shobeir Pirayeh Gar
Structural Engineer, Houston Offshore Engineering, 17220 Katy Fwy, Suite 200, Houston, TX 77094; formerly, Graduate Assistant Researcher, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX 77843-3136
4 shared publications
Latest Publications
- 7 September 2026
- Published by Elsevier in Transportation Geotechnics
- Vol. 65
Enhanced rail track modeling and modulus estimation using DIC-calibrated finite element analysis
- 7 September 2026
- Published by Elsevier in Transportation Geotechnics
- Vol. 65
Enhanced rail track modeling and modulus estimation using DIC-calibrated finite element analysis
- Open Access
- 1 April 2026
- Published by Elsevier in SSRN Electronic Journal
Enhanced Rail Track Modeling and Modulus Estimation Using DIC-Calibrated Finite Element Analysis
Understanding vertical rail deflection is essential for evaluating track support conditions to minimize derailments and optimize maintenance strategies. While many techniques have been used to understand non-stationary nature of Vertical Track Deflection (VTD) measuring equipment, there is a limitation on the understanding of the distribution of loads along the length of the track due to axle loads. This study addresses this gap by developing a framework with multi-point, vision-based wayside measurements to calibrate Finite Element (FE) models and analytical methods that show the effects of load distribution due to axle loads along the track. Using a portable Digital Image Correlation (DIC) system, rail VTD was captured at multiple points of three locations with differing substructure characteristics to estimate the deformed profile and track modulus and calibrate 3D FE models. From the FE models, a parametric study was conducted to evaluate the effects of VTD on subgrade and ballast thickness and modulus. Comparative analyses were also conducted using the beam-on-elastic-foundation (BOEF) and Pasternak foundation models. Results demonstrated a nonlinear decrease in rail deflection with increasing subgrade and ballast modulus between 14 to 138 MPa and 103 to 345 MPa, respectively, and validated the Pasternak foundation model as a better representation of the observed track deflection behavior. Variation greater than 50% of ballast thickness and subgrade depth governed the deflection predictions due to its influence on the track’s flexibility. The analysis indicated that a minimum ballast modulus of 172 MPa is needed to meet AREMA guidelines.
- 1 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEnhanced Rail Track Modeling and Modulus Estimation Using DIC-Calibrated Finite Element Analysis
Understanding vertical rail deflection is essential for evaluating track support conditions to minimize derailments and optimize maintenance strategies. While many techniques have been used to understand non-stationary nature of Vertical Track Deflection (VTD) measuring equipment, there is a limitation on the understanding of the distribution of loads along the length of the track due to axle loads. This study addresses this gap by developing a framework with multi-point, vision-based wayside measurements to calibrate Finite Element (FE) models and analytical methods that show the effects of load distribution due to axle loads along the track. Using a portable Digital Image Correlation (DIC) system, rail VTD was captured at multiple points of three locations with differing substructure characteristics to estimate the deformed profile and track modulus and calibrate 3D FE models. From the FE models, a parametric study was conducted to evaluate the effects of VTD on subgrade and ballast thickness and modulus. Comparative analyses were also conducted using the beam-on-elastic-foundation (BOEF) and Pasternak foundation models. Results demonstrated a nonlinear decrease in rail deflection with increasing subgrade and ballast modulus between 14 to 138 MPa and 103 to 345 MPa, respectively, and validated the Pasternak foundation model as a better representation of the observed track deflection behavior. Variation greater than 50% of ballast thickness and subgrade depth governed the deflection predictions due to its influence on the track’s flexibility. The analysis indicated that a minimum ballast modulus of 172 MPa is needed to meet AREMA guidelines.
- 23 February 2026
- Published by Elsevier in Ocean Engineering
- Vol. 353
Numerical modeling of wave-induced loads on coastal bridges using a Coupled Eulerian– Lagrangian analysis
- 23 February 2026
- Published by Elsevier in Ocean Engineering
- Vol. 353
Numerical modeling of wave-induced loads on coastal bridges using a Coupled Eulerian– Lagrangian analysis
- Open Access
Deterioration Envelopes for Predicting Concrete Bridge-Deck Deterioration Due to Chloride Exposure
Bridge decks are exposed to chloride ingress from deicing salts, freeze–thaw cycling, and repeated wetting and drying, which gradually degrades the concrete over time. Many existing models treat concrete conditions as static and do not capture time-varying chloride exposure. This study develops deterioration envelopes for concrete bridge decks to predict long-term loss of compressive strength and internal integrity by integrating accelerated laboratory wet–dry and freeze–thaw testing with in-service bridge-deck core measurements from Delaware bridges. The model is supported by three data sources: accelerated laboratory tests, cores from in-service bridges provided by the Delaware Department of Transportation (DelDOT), and climate and asset datasets from the National Oceanic and Atmospheric Administration (NOAA) and the Federal Highway Administration’s (FHWA) InfoBridge™ database. Laboratory specimens (n = 300) were reproduced based on Delaware mix designs from the 1970s and 1980s and were tested in accordance with ASTM and ACI protocols. Environmental conditioning applied wet–dry and freeze–thaw cycles at chloride contents of 0, 3, and 15 percent to replicate field exposure within a shortened test period. Measured properties included compressive strength, modulus of elasticity, resonance frequency, and chloride penetration. The results show a gradual, near-linear reduction in compressive strength and resonance frequency with increasing chloride content over 160 cycles, which corresponds to about 2 to 5 years of service exposure. Resonance frequency was the most sensitive indicator of internal damage across the tested chloride contents. By combining test results, core data, and bridge inspection history into a single durability index, the deterioration envelopes forecast long-term degradation under different chloride exposures, providing a basis for prediction that extends beyond visual inspection.
Open AccessDeterioration Envelopes for Predicting Concrete Bridge-Deck Deterioration Due to Chloride Exposure
Bridge decks are exposed to chloride ingress from deicing salts, freeze–thaw cycling, and repeated wetting and drying, which gradually degrades the concrete over time. Many existing models treat concrete conditions as static and do not capture time-varying chloride exposure. This study develops deterioration envelopes for concrete bridge decks to predict long-term loss of compressive strength and internal integrity by integrating accelerated laboratory wet–dry and freeze–thaw testing with in-service bridge-deck core measurements from Delaware bridges. The model is supported by three data sources: accelerated laboratory tests, cores from in-service bridges provided by the Delaware Department of Transportation (DelDOT), and climate and asset datasets from the National Oceanic and Atmospheric Administration (NOAA) and the Federal Highway Administration’s (FHWA) InfoBridge™ database. Laboratory specimens (n = 300) were reproduced based on Delaware mix designs from the 1970s and 1980s and were tested in accordance with ASTM and ACI protocols. Environmental conditioning applied wet–dry and freeze–thaw cycles at chloride contents of 0, 3, and 15 percent to replicate field exposure within a shortened test period. Measured properties included compressive strength, modulus of elasticity, resonance frequency, and chloride penetration. The results show a gradual, near-linear reduction in compressive strength and resonance frequency with increasing chloride content over 160 cycles, which corresponds to about 2 to 5 years of service exposure. Resonance frequency was the most sensitive indicator of internal damage across the tested chloride contents. By combining test results, core data, and bridge inspection history into a single durability index, the deterioration envelopes forecast long-term degradation under different chloride exposures, providing a basis for prediction that extends beyond visual inspection.
- Open Access
- 5 December 2025
- Published by MDPI AG in Preprints.org
Deterioration Envelopes for Predicting Concrete Bridge Deck Deterioration due to Chloride Exposure
Bridge decks are exposed to chloride ingress from de-icing salts, freeze-thaw cycling, and repeated wetting and drying, which gradually degrades the concrete over time. Many existing models treat concrete conditions as static and do not capture time-varying chloride exposure. This study develops deterioration envelopes for concrete bridge decks that predict loss of compressive strength and internal integrity by combining accelerated laboratory testing with in-situ bridge core data extracted from Delaware bridges. The model is supported by three data sources: accelerated laboratory tests, cores from in-service bridges provided by the Delaware Department of Transportation (DelDOT), and climate and asset datasets from the National Oceanic and Atmospheric Administration (NOAA) and the Federal Highway Administration's (FHWA) InfoBridge™ database. Laboratory specimens (n = 300) were reproduced based on Delaware mix designs from the 1970s and 1980s and were tested in accordance with ASTM and ACI protocols. Environmental conditioning applied wet-dry and freeze-thaw cycles at chloride contents of 0, 3, and 15 percent to replicate field exposure within a shortened test period. Measured properties included compressive strength, modulus of elasticity, resonance frequency, and chloride penetration. Results show a gradual, near-linear reduction in compressive strength and resonance frequency with increasing chloride content over 160 cycles, which corresponds to about 2 to 5 years of service exposure. Resonance frequency was the most sensitive indicator of internal damage across the tested chloride contents. By combining test results, core data, and bridge inspection history into a single durability index, the deterioration envelopes forecast long-term degradation under different chloride exposures, providing a basis for prediction that extends beyond visual inspection.
- 5 December 2025
- Published by MDPI AG in Preprints.org
Open AccessDeterioration Envelopes for Predicting Concrete Bridge Deck Deterioration due to Chloride Exposure
Bridge decks are exposed to chloride ingress from de-icing salts, freeze-thaw cycling, and repeated wetting and drying, which gradually degrades the concrete over time. Many existing models treat concrete conditions as static and do not capture time-varying chloride exposure. This study develops deterioration envelopes for concrete bridge decks that predict loss of compressive strength and internal integrity by combining accelerated laboratory testing with in-situ bridge core data extracted from Delaware bridges. The model is supported by three data sources: accelerated laboratory tests, cores from in-service bridges provided by the Delaware Department of Transportation (DelDOT), and climate and asset datasets from the National Oceanic and Atmospheric Administration (NOAA) and the Federal Highway Administration's (FHWA) InfoBridge™ database. Laboratory specimens (n = 300) were reproduced based on Delaware mix designs from the 1970s and 1980s and were tested in accordance with ASTM and ACI protocols. Environmental conditioning applied wet-dry and freeze-thaw cycles at chloride contents of 0, 3, and 15 percent to replicate field exposure within a shortened test period. Measured properties included compressive strength, modulus of elasticity, resonance frequency, and chloride penetration. Results show a gradual, near-linear reduction in compressive strength and resonance frequency with increasing chloride content over 160 cycles, which corresponds to about 2 to 5 years of service exposure. Resonance frequency was the most sensitive indicator of internal damage across the tested chloride contents. By combining test results, core data, and bridge inspection history into a single durability index, the deterioration envelopes forecast long-term degradation under different chloride exposures, providing a basis for prediction that extends beyond visual inspection.
- Open Access
- 28 March 2025
- Published by SAGE Publications in Environment and Planning B: Urban Analytics and City Science
- Vol. 52 (7) , 1549-1556
Urban planning and IPCC-like city assessments integration for climate-resilient cities
The rapidly intensifying effects of climate change on urban settlements demand that cities move to the forefront of resilience planning. Climate extremes, from heatwaves to flooding, are increasingly testing the adaptability limits of urban systems and the vulnerability of their populations. Recognizing the unique position of cities, the IPCC’s seventh assessment cycle has prioritized urban areas in its upcoming Special Report on Climate Change and Cities. The IPCC report underscores the potential of cities to act as agents of climate adaptation and provides a framework for cities to build climate-resilient systems. Cities are positioned to pioneer practical, integrative solutions that blend climate sciences with urban planning, establishing frameworks that align economic growth, health equity, environmental sustainability, social justice, and effective governance. This opinion piece explores how cities, by positioning themselves as hubs for innovation, policy reform, and community collaboration, can transform climate vulnerabilities into opportunities for community resilience and sustainability, especially by becoming more-than-human cities, setting examples on the global stage.
- 28 March 2025
- Published by SAGE Publications in Environment and Planning B: Urban Analytics and City Science
- Vol. 52 (7) , 1549-1556
Open AccessUrban planning and IPCC-like city assessments integration for climate-resilient cities
The rapidly intensifying effects of climate change on urban settlements demand that cities move to the forefront of resilience planning. Climate extremes, from heatwaves to flooding, are increasingly testing the adaptability limits of urban systems and the vulnerability of their populations. Recognizing the unique position of cities, the IPCC’s seventh assessment cycle has prioritized urban areas in its upcoming Special Report on Climate Change and Cities. The IPCC report underscores the potential of cities to act as agents of climate adaptation and provides a framework for cities to build climate-resilient systems. Cities are positioned to pioneer practical, integrative solutions that blend climate sciences with urban planning, establishing frameworks that align economic growth, health equity, environmental sustainability, social justice, and effective governance. This opinion piece explores how cities, by positioning themselves as hubs for innovation, policy reform, and community collaboration, can transform climate vulnerabilities into opportunities for community resilience and sustainability, especially by becoming more-than-human cities, setting examples on the global stage.
- 1 February 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 39 (1)
Determination of Bridge Elements’ Weights Using the Random Forest Algorithm
- 1 February 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 39 (1)
Determination of Bridge Elements’ Weights Using the Random Forest Algorithm