Hepeng Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hepeng Zhang has a total of 217 co-authors. Here are the top co-authors by number of shared publications:
- Qiuyu Zhang
Northwestern Polytechnical University
43 shared publications Qiuyu Zhang
Xi'an Key Laboratory of Functional Organic Porous Materials School of Chemistry and Chemical Engineering Northwestern Polytechnical University Xi'an P. R. China
37 shared publicationsShaowei Yang
Xi’an Key Laboratory of Functional Organic Porous Materials, School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi’an, 710129, PR China
32 shared publicationsHaidong Shen
Xi'an Key Laboratory of Functional Organic Porous Materials School of Chemistry and Chemical Engineering Northwestern Polytechnical University Xi'an P. R. China
23 shared publicationsHao Jiang
Xi'an Key Laboratory of Functional Organic Porous Materials School of Chemistry and Chemical Engineering Northwestern Polytechnical University Xi'an P. R. China
22 shared publicationsPeng Zhao
Xi'an Key Laboratory of Functional Organic Porous Materials School of Chemistry and Chemical Engineering Northwestern Polytechnical University Xi'an P. R. China
17 shared publications
Latest Publications
- 5 November 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (87) , 22346-22350
Chlorine-doping regulation of Fe–NC enhanced oxygen reduction and zinc–air battery performance
Chloride regulation reshapes the electronic structure of Fe–NC, weakens excessive *OH adsorption, and promotes oxygen reduction. This electronic modulation leads to high-performance and durable zinc–air batteries.
- 5 November 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (87) , 22346-22350
Chlorine-doping regulation of Fe–NC enhanced oxygen reduction and zinc–air battery performance
Chloride regulation reshapes the electronic structure of Fe–NC, weakens excessive *OH adsorption, and promotes oxygen reduction. This electronic modulation leads to high-performance and durable zinc–air batteries.
- 23 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (45) , e2971119
Oleylamine‐Assisted Construction of Bi‐Bi 2 O 2 CO 3 Heterojunction With a Self‐Release‐Replenishing Mars‐van Krevelen‐Type Mechanism for Efficient CO 2 Electroreduction
Bismuth‐based catalysts for the electrochemical CO 2 reduction (CO 2 RR) to formate have been extensively developed, yet the limited mass transport of gaseous CO 2 remains a sspersistent challenge. Herein, we report a novel Bi‐Bi 2 O 2 CO 3 heterojunction electrocatalyst (Bi‐BOC‐OLA) constructed via an oleylamine‐assisted strategy and disclose a new self‐release‐replenishing Mars‐van Krevelen‐type mechanism that alleviates this constraint. Oleylamine‐induced expansion of [Bi 2 O 2 ] 2+ layers enables the Bi 2 O 2 CO 3 lattice in Bi‐BOC‐OLA to function as an in situ carbon reservoir that continuously supplies carbon–oxygen intermediates to active Bi centers. External CO 2 replenishes lattice vacancies, creating an energy‐efficient cycle that reduces reliance on gaseous CO 2 transport. Consequently, Bi‐BOC‐OLA achieves a formate Faradaic efficiency of 97%, a record partial current density of −1.4 A cm −2 and stable operation for 160 h at −400 mA cm −2 . This work reveals how dynamic lattice participation in Bi‐Bi 2 O 2 CO 3 heterojunctions enables high‐rate CO 2 ‐to‐formate conversion and provides a new mechanistic basis for the design of Bi‐based CO 2 RR catalysts.
- 23 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (45) , e2971119
Oleylamine‐Assisted Construction of Bi‐Bi 2 O 2 CO 3 Heterojunction With a Self‐Release‐Replenishing Mars‐van Krevelen‐Type Mechanism for Efficient CO 2 Electroreduction
Bismuth‐based catalysts for the electrochemical CO 2 reduction (CO 2 RR) to formate have been extensively developed, yet the limited mass transport of gaseous CO 2 remains a sspersistent challenge. Herein, we report a novel Bi‐Bi 2 O 2 CO 3 heterojunction electrocatalyst (Bi‐BOC‐OLA) constructed via an oleylamine‐assisted strategy and disclose a new self‐release‐replenishing Mars‐van Krevelen‐type mechanism that alleviates this constraint. Oleylamine‐induced expansion of [Bi 2 O 2 ] 2+ layers enables the Bi 2 O 2 CO 3 lattice in Bi‐BOC‐OLA to function as an in situ carbon reservoir that continuously supplies carbon–oxygen intermediates to active Bi centers. External CO 2 replenishes lattice vacancies, creating an energy‐efficient cycle that reduces reliance on gaseous CO 2 transport. Consequently, Bi‐BOC‐OLA achieves a formate Faradaic efficiency of 97%, a record partial current density of −1.4 A cm −2 and stable operation for 160 h at −400 mA cm −2 . This work reveals how dynamic lattice participation in Bi‐Bi 2 O 2 CO 3 heterojunctions enables high‐rate CO 2 ‐to‐formate conversion and provides a new mechanistic basis for the design of Bi‐based CO 2 RR catalysts.
- 23 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (45) , e2971119
Oleylamine‐Assisted Construction of Bi‐Bi 2 O 2 CO 3 Heterojunction With a Self‐Release‐Replenishing Mars‐van Krevelen‐Type Mechanism for Efficient CO 2 Electroreduction
Bismuth‐based catalysts for the electrochemical CO 2 reduction (CO 2 RR) to formate have been extensively developed, yet the limited mass transport of gaseous CO 2 remains a sspersistent challenge. Herein, we report a novel Bi‐Bi 2 O 2 CO 3 heterojunction electrocatalyst (Bi‐BOC‐OLA) constructed via an oleylamine‐assisted strategy and disclose a new self‐release‐replenishing Mars‐van Krevelen‐type mechanism that alleviates this constraint. Oleylamine‐induced expansion of [Bi 2 O 2 ] 2+ layers enables the Bi 2 O 2 CO 3 lattice in Bi‐BOC‐OLA to function as an in situ carbon reservoir that continuously supplies carbon–oxygen intermediates to active Bi centers. External CO 2 replenishes lattice vacancies, creating an energy‐efficient cycle that reduces reliance on gaseous CO 2 transport. Consequently, Bi‐BOC‐OLA achieves a formate Faradaic efficiency of 97%, a record partial current density of −1.4 A cm −2 and stable operation for 160 h at −400 mA cm −2 . This work reveals how dynamic lattice participation in Bi‐Bi 2 O 2 CO 3 heterojunctions enables high‐rate CO 2 ‐to‐formate conversion and provides a new mechanistic basis for the design of Bi‐based CO 2 RR catalysts.
- 23 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (45) , e2971119
Oleylamine‐Assisted Construction of Bi‐Bi 2 O 2 CO 3 Heterojunction With a Self‐Release‐Replenishing Mars‐van Krevelen‐Type Mechanism for Efficient CO 2 Electroreduction
Bismuth‐based catalysts for the electrochemical CO 2 reduction (CO 2 RR) to formate have been extensively developed, yet the limited mass transport of gaseous CO 2 remains a sspersistent challenge. Herein, we report a novel Bi‐Bi 2 O 2 CO 3 heterojunction electrocatalyst (Bi‐BOC‐OLA) constructed via an oleylamine‐assisted strategy and disclose a new self‐release‐replenishing Mars‐van Krevelen‐type mechanism that alleviates this constraint. Oleylamine‐induced expansion of [Bi 2 O 2 ] 2+ layers enables the Bi 2 O 2 CO 3 lattice in Bi‐BOC‐OLA to function as an in situ carbon reservoir that continuously supplies carbon–oxygen intermediates to active Bi centers. External CO 2 replenishes lattice vacancies, creating an energy‐efficient cycle that reduces reliance on gaseous CO 2 transport. Consequently, Bi‐BOC‐OLA achieves a formate Faradaic efficiency of 97%, a record partial current density of −1.4 A cm −2 and stable operation for 160 h at −400 mA cm −2 . This work reveals how dynamic lattice participation in Bi‐Bi 2 O 2 CO 3 heterojunctions enables high‐rate CO 2 ‐to‐formate conversion and provides a new mechanistic basis for the design of Bi‐based CO 2 RR catalysts.
- 22 September 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (18) , 6143-6152
Synergistic Rh 1 –Ru 1 heteronuclear dual-single-atom sites on CeO 2 for accelerative deep hydrogenation of aromatic liquid organic hydrogen carriers
A Rh–Ru diatomic catalyst on CeO 2 efficiently hydrogenates diverse liquid organic hydrogen carriers under mild conditions. Rh–Ru cooperation enhances substrate activation and hydrogen transfer, enabling high activity at 80 °C and 2–4 MPa H 2 .
- 22 September 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (18) , 6143-6152
Synergistic Rh 1 –Ru 1 heteronuclear dual-single-atom sites on CeO 2 for accelerative deep hydrogenation of aromatic liquid organic hydrogen carriers
A Rh–Ru diatomic catalyst on CeO 2 efficiently hydrogenates diverse liquid organic hydrogen carriers under mild conditions. Rh–Ru cooperation enhances substrate activation and hydrogen transfer, enabling high activity at 80 °C and 2–4 MPa H 2 .
- 8 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41) , e5594041
Room‐Temperature Rapid Synthesis of Crystalline Ag─C Coordinated MOFs for Highly Efficient Acidic CO 2 Electroreduction
The acidic CO 2 electroreduction reaction (eCO 2 RR) shows great promise in addressing carbonation issues encountered under neutral/alkaline conditions. However, it remains challenged by low selectivity arising from high proton availability, as well as catalyst degradation due to the corrosive and reductive nature of acidic media. In this work, we demonstrate a room‐temperature and rapid (< 5 min) synthesis of a novel crystalline Ag–C coordinated metal‐organic framework (TEPT‐AgC‐MOF) employing 4′‐(4‐ethynylphenyl)‐2,2′:6′,2″‐terpyridine as the ligand, enabling gram‐scale production. The incorporation of strongly covalent Ag–C bonds significantly enhances the structural stability of the catalyst under acidic conditions. Moreover, the triazine‐containing ligands in conjunction with a modulated electronic structure collectively enhance CO 2 adsorption, activation, and reduction efficiency. The resulting catalyst delivers outstanding eCO 2 RR performance in acid, achieving a CO Faradaic efficiency of 94.5%, a partial current density of 417.5 mA·cm −2 , and a turnover frequency (TOF) of 7357 h −1 , surpassing those of most reported Ag‐based acidic catalysts. Notably, this study not only establishes a facile route for synthesizing Ag‐MOFs, but also constitutes the first investigation into crystalline Ag–C coordinated MOFs as electrocatalysts for the acidic eCO 2 RR.
- 8 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41) , e5594041
Room‐Temperature Rapid Synthesis of Crystalline Ag─C Coordinated MOFs for Highly Efficient Acidic CO 2 Electroreduction
The acidic CO 2 electroreduction reaction (eCO 2 RR) shows great promise in addressing carbonation issues encountered under neutral/alkaline conditions. However, it remains challenged by low selectivity arising from high proton availability, as well as catalyst degradation due to the corrosive and reductive nature of acidic media. In this work, we demonstrate a room‐temperature and rapid (< 5 min) synthesis of a novel crystalline Ag–C coordinated metal‐organic framework (TEPT‐AgC‐MOF) employing 4′‐(4‐ethynylphenyl)‐2,2′:6′,2″‐terpyridine as the ligand, enabling gram‐scale production. The incorporation of strongly covalent Ag–C bonds significantly enhances the structural stability of the catalyst under acidic conditions. Moreover, the triazine‐containing ligands in conjunction with a modulated electronic structure collectively enhance CO 2 adsorption, activation, and reduction efficiency. The resulting catalyst delivers outstanding eCO 2 RR performance in acid, achieving a CO Faradaic efficiency of 94.5%, a partial current density of 417.5 mA·cm −2 , and a turnover frequency (TOF) of 7357 h −1 , surpassing those of most reported Ag‐based acidic catalysts. Notably, this study not only establishes a facile route for synthesizing Ag‐MOFs, but also constitutes the first investigation into crystalline Ag–C coordinated MOFs as electrocatalysts for the acidic eCO 2 RR.
- 8 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41)
Room‐Temperature Rapid Synthesis of Crystalline Ag─C Coordinated MOFs for Highly Efficient Acidic CO 2 Electroreduction
The acidic CO 2 electroreduction reaction (eCO 2 RR) shows great promise in addressing carbonation issues encountered under neutral/alkaline conditions. However, it remains challenged by low selectivity arising from high proton availability, as well as catalyst degradation due to the corrosive and reductive nature of acidic media. In this work, we demonstrate a room‐temperature and rapid (< 5 min) synthesis of a novel crystalline Ag–C coordinated metal‐organic framework (TEPT‐AgC‐MOF) employing 4′‐(4‐ethynylphenyl)‐2,2′:6′,2″‐terpyridine as the ligand, enabling gram‐scale production. The incorporation of strongly covalent Ag–C bonds significantly enhances the structural stability of the catalyst under acidic conditions. Moreover, the triazine‐containing ligands in conjunction with a modulated electronic structure collectively enhance CO 2 adsorption, activation, and reduction efficiency. The resulting catalyst delivers outstanding eCO 2 RR performance in acid, achieving a CO Faradaic efficiency of 94.5%, a partial current density of 417.5 mA·cm −2 , and a turnover frequency (TOF) of 7357 h −1 , surpassing those of most reported Ag‐based acidic catalysts. Notably, this study not only establishes a facile route for synthesizing Ag‐MOFs, but also constitutes the first investigation into crystalline Ag–C coordinated MOFs as electrocatalysts for the acidic eCO 2 RR.
- 8 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41)
Room‐Temperature Rapid Synthesis of Crystalline Ag─C Coordinated MOFs for Highly Efficient Acidic CO 2 Electroreduction
The acidic CO 2 electroreduction reaction (eCO 2 RR) shows great promise in addressing carbonation issues encountered under neutral/alkaline conditions. However, it remains challenged by low selectivity arising from high proton availability, as well as catalyst degradation due to the corrosive and reductive nature of acidic media. In this work, we demonstrate a room‐temperature and rapid (< 5 min) synthesis of a novel crystalline Ag–C coordinated metal‐organic framework (TEPT‐AgC‐MOF) employing 4′‐(4‐ethynylphenyl)‐2,2′:6′,2″‐terpyridine as the ligand, enabling gram‐scale production. The incorporation of strongly covalent Ag–C bonds significantly enhances the structural stability of the catalyst under acidic conditions. Moreover, the triazine‐containing ligands in conjunction with a modulated electronic structure collectively enhance CO 2 adsorption, activation, and reduction efficiency. The resulting catalyst delivers outstanding eCO 2 RR performance in acid, achieving a CO Faradaic efficiency of 94.5%, a partial current density of 417.5 mA·cm −2 , and a turnover frequency (TOF) of 7357 h −1 , surpassing those of most reported Ag‐based acidic catalysts. Notably, this study not only establishes a facile route for synthesizing Ag‐MOFs, but also constitutes the first investigation into crystalline Ag–C coordinated MOFs as electrocatalysts for the acidic eCO 2 RR.
- Open Access
- 6 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (71) , e77557
Rational Ligand‐Mediated Microenvironment Regulation in Trinuclear Cu‐Based Metal‐Covalent Organic Frameworks for Enhanced Electrocatalytic CO Reduction
Electrochemical CO reduction (eCORR) is a promising route to high‐value multicarbon products, yet its performance is fundamentally constrained by two intrinsic bottlenecks: insufficient CO surface coverage and sluggish C─C coupling kinetics. Herein, via a ligand engineering strategy, we construct synergistic centers for in‐situ CO enrichment and conversion by conducting Schiff‐base condensation between trinuclear cuprous clusters and organic units featuring sp 2 ‐hybridized nitrogen centers, successfully synthesizing Cu(I)‐based two‐dimensional metal‐covalent organic frameworks (Cu‐TAPA). At a current density of 100 mA cm −2 , Cu‐TAPA achieves a Faradaic efficiency of 81.28% toward C 2 products, representing state‐of‐the‐art performance. Experimental and theoretical investigations collectively demonstrate that the polar nitrogen sites of TAPA ligands pre‐enrich CO molecules through electrostatic interactions, creating a microenvironment with a high local CO concentration; the enriched CO is subsequently transferred to copper catalytic sites, substantially lowering the C─C coupling energy barrier and thereby enhancing C 2 selectivity. This study proposes, at the atomic level, a new paradigm of ligand‐mediated “in‐situ CO enrichment‐conversion” for catalyst design, providing a general strategy for the precise construction of efficient eCORR catalysts.
- 6 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (71) , e77557
Open AccessRational Ligand‐Mediated Microenvironment Regulation in Trinuclear Cu‐Based Metal‐Covalent Organic Frameworks for Enhanced Electrocatalytic CO Reduction
Electrochemical CO reduction (eCORR) is a promising route to high‐value multicarbon products, yet its performance is fundamentally constrained by two intrinsic bottlenecks: insufficient CO surface coverage and sluggish C─C coupling kinetics. Herein, via a ligand engineering strategy, we construct synergistic centers for in‐situ CO enrichment and conversion by conducting Schiff‐base condensation between trinuclear cuprous clusters and organic units featuring sp 2 ‐hybridized nitrogen centers, successfully synthesizing Cu(I)‐based two‐dimensional metal‐covalent organic frameworks (Cu‐TAPA). At a current density of 100 mA cm −2 , Cu‐TAPA achieves a Faradaic efficiency of 81.28% toward C 2 products, representing state‐of‐the‐art performance. Experimental and theoretical investigations collectively demonstrate that the polar nitrogen sites of TAPA ligands pre‐enrich CO molecules through electrostatic interactions, creating a microenvironment with a high local CO concentration; the enriched CO is subsequently transferred to copper catalytic sites, substantially lowering the C─C coupling energy barrier and thereby enhancing C 2 selectivity. This study proposes, at the atomic level, a new paradigm of ligand‐mediated “in‐situ CO enrichment‐conversion” for catalyst design, providing a general strategy for the precise construction of efficient eCORR catalysts.
- 6 August 2026
- Published by Wiley in Angewandte Chemie International Edition
Electrocatalytic C–C Coupled Oligomerization From Biomass Molecules Through Pd Single‐Atom Interfacial Regulation
Fossil‐derived diesel raises sustainability and air‐quality concerns, motivating biomass‐based alternatives; however, current biodiesel routes suffer from food–fuel competition, poor fuel properties, and energy‐intensive upgrading. Electrocatalytic C─C coupling of biomass molecules followed by hydrodeoxygenation (HDO) offers a cleaner pathway, yet has been limited to dimer formation. Here, we successfully resolved this longstanding bottleneck through construction of Pd 1 Cu single‐atom alloy electrocatalyst, a trimer of 5‐hydroxymethylfurfural is obtained with 44.7% selectivity. The combined oligomer (dimer and trimer) selectivity reaches 95.0% with 93.2% Faradaic efficiency, production rate achieves a record high of ∼50 g g cat −1 h −1 . Subsequent HDO converts the oligomers into heteroatom‐free n‐dodecane and n‐octadecane diesel blendstocks. Operando spectroscopy reveals a surface‐confined ketyl‐radical pathway in which isolated Pd atoms regulate hydrogen‐atom supply and substrate adsorption, favoring C─C coupling over hydrogenation. This work establishes an electricity‐driven route for controlled carbon‐chain growth from biomass platforms.
- 6 August 2026
- Published by Wiley in Angewandte Chemie International Edition
Electrocatalytic C–C Coupled Oligomerization From Biomass Molecules Through Pd Single‐Atom Interfacial Regulation
Fossil‐derived diesel raises sustainability and air‐quality concerns, motivating biomass‐based alternatives; however, current biodiesel routes suffer from food–fuel competition, poor fuel properties, and energy‐intensive upgrading. Electrocatalytic C─C coupling of biomass molecules followed by hydrodeoxygenation (HDO) offers a cleaner pathway, yet has been limited to dimer formation. Here, we successfully resolved this longstanding bottleneck through construction of Pd 1 Cu single‐atom alloy electrocatalyst, a trimer of 5‐hydroxymethylfurfural is obtained with 44.7% selectivity. The combined oligomer (dimer and trimer) selectivity reaches 95.0% with 93.2% Faradaic efficiency, production rate achieves a record high of ∼50 g g cat −1 h −1 . Subsequent HDO converts the oligomers into heteroatom‐free n‐dodecane and n‐octadecane diesel blendstocks. Operando spectroscopy reveals a surface‐confined ketyl‐radical pathway in which isolated Pd atoms regulate hydrogen‐atom supply and substrate adsorption, favoring C─C coupling over hydrogenation. This work establishes an electricity‐driven route for controlled carbon‐chain growth from biomass platforms.
- 6 August 2026
- Published by Wiley in Angewandte Chemie
Electrocatalytic C–C Coupled Oligomerization From Biomass Molecules Through Pd Single‐Atom Interfacial Regulation
Fossil‐derived diesel raises sustainability and air‐quality concerns, motivating biomass‐based alternatives; however, current biodiesel routes suffer from food–fuel competition, poor fuel properties, and energy‐intensive upgrading. Electrocatalytic C─C coupling of biomass molecules followed by hydrodeoxygenation (HDO) offers a cleaner pathway, yet has been limited to dimer formation. Here, we successfully resolved this longstanding bottleneck through construction of Pd 1 Cu single‐atom alloy electrocatalyst, a trimer of 5‐hydroxymethylfurfural is obtained with 44.7% selectivity. The combined oligomer (dimer and trimer) selectivity reaches 95.0% with 93.2% Faradaic efficiency, production rate achieves a record high of ∼50 g g cat −1 h −1 . Subsequent HDO converts the oligomers into heteroatom‐free n‐dodecane and n‐octadecane diesel blendstocks. Operando spectroscopy reveals a surface‐confined ketyl‐radical pathway in which isolated Pd atoms regulate hydrogen‐atom supply and substrate adsorption, favoring C─C coupling over hydrogenation. This work establishes an electricity‐driven route for controlled carbon‐chain growth from biomass platforms.
- 6 August 2026
- Published by Wiley in Angewandte Chemie
Electrocatalytic C–C Coupled Oligomerization From Biomass Molecules Through Pd Single‐Atom Interfacial Regulation
Fossil‐derived diesel raises sustainability and air‐quality concerns, motivating biomass‐based alternatives; however, current biodiesel routes suffer from food–fuel competition, poor fuel properties, and energy‐intensive upgrading. Electrocatalytic C─C coupling of biomass molecules followed by hydrodeoxygenation (HDO) offers a cleaner pathway, yet has been limited to dimer formation. Here, we successfully resolved this longstanding bottleneck through construction of Pd 1 Cu single‐atom alloy electrocatalyst, a trimer of 5‐hydroxymethylfurfural is obtained with 44.7% selectivity. The combined oligomer (dimer and trimer) selectivity reaches 95.0% with 93.2% Faradaic efficiency, production rate achieves a record high of ∼50 g g cat −1 h −1 . Subsequent HDO converts the oligomers into heteroatom‐free n‐dodecane and n‐octadecane diesel blendstocks. Operando spectroscopy reveals a surface‐confined ketyl‐radical pathway in which isolated Pd atoms regulate hydrogen‐atom supply and substrate adsorption, favoring C─C coupling over hydrogenation. This work establishes an electricity‐driven route for controlled carbon‐chain growth from biomass platforms.
- Open Access
- 3 August 2026
- Published by Elsevier in SSRN Electronic Journal
Dynamic Cu-H Working-State Descriptor for Methane-Selective CO2 Electroreduction in Trinuclear Cu Covalent Metal-Organic Frameworks
Electrochemical CO2 reduction (CO2RR) to methane offers a route to store renewable electricity in energy-dense chemical bonds, but selectivity remains challenge because single static descriptors of Cu-based catalysts often fail to explain their non-monotonic CO2RR activity trends. Here, by the predicted of DFT calculations, we identifies Cu-H as the most favourable dynamical working state for the CH4 pathway among the adsorbed H, O, and OH models, and trinuclear Cu covalent metal-organic frameworks with linker containing two phenyl rings (Cu3-B2-CMOF) possesses the most dynamically stable H species capacity due to its optimal balance between water activation and H adsorption. Benefiting from this feature, Cu3-B2-CMOF achieves 68% CH4 Faradaic efficiency and -180 mA cm-2 CH4 partial current density, exhibiting the highest performance among the obtained Cu3-B1/B2/B3-CMOF series electrocatalysts. Utilizing Cu-H as a descriptor successfully reconciles the structure-activity relationships that remain elusive when relying solely on static electronic properties. This work provides a dynamic descriptor for reference in the CO2RR to CH4, while also offering new insights for the design of electrocatalysts.
- 3 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDynamic Cu-H Working-State Descriptor for Methane-Selective CO2 Electroreduction in Trinuclear Cu Covalent Metal-Organic Frameworks
Electrochemical CO2 reduction (CO2RR) to methane offers a route to store renewable electricity in energy-dense chemical bonds, but selectivity remains challenge because single static descriptors of Cu-based catalysts often fail to explain their non-monotonic CO2RR activity trends. Here, by the predicted of DFT calculations, we identifies Cu-H as the most favourable dynamical working state for the CH4 pathway among the adsorbed H, O, and OH models, and trinuclear Cu covalent metal-organic frameworks with linker containing two phenyl rings (Cu3-B2-CMOF) possesses the most dynamically stable H species capacity due to its optimal balance between water activation and H adsorption. Benefiting from this feature, Cu3-B2-CMOF achieves 68% CH4 Faradaic efficiency and -180 mA cm-2 CH4 partial current density, exhibiting the highest performance among the obtained Cu3-B1/B2/B3-CMOF series electrocatalysts. Utilizing Cu-H as a descriptor successfully reconciles the structure-activity relationships that remain elusive when relying solely on static electronic properties. This work provides a dynamic descriptor for reference in the CO2RR to CH4, while also offering new insights for the design of electrocatalysts.