AUAdam Ulfsbo

Adam Ulfsbo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Adam Ulfsbo has a total of 394 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Furthest-first inversion for internal consistency adjustments in the biogeochemical data product GLODAPv3

    by Matthew P. Humphreys, Siv K. Lauvset, Nico Lange, Henry C. Bittig, Brendan R. Carter, Mario Hoppema, Akihiko Murata, Are Olsen, Toste Tanhua, Adam Ulfsbo, et al.

    The global ocean absorbs a significant portion of anthropogenic carbon dioxide (CO 2 ) emissions. Tracking the fate of absorbed CO 2 and its impacts requires an internally consistent global observational dataset spanning decades. In the Global Ocean Data Analysis Project (GLODAP), data from disparate research cruises are compared in a secondary quality-control process, adjusted for consistency where necessary and compiled into a data product. Differences between cruises are quantified with a crossover analysis, comparing data at depth (where natural variability is minimal) from nearby sampling stations, and an inversion algorithm calculates a set of adjustments that would minimise these differences globally. The adjustments are reviewed by an expert committee and a subset applied to produce the final data product. The previous major version (GLODAPv2) used a weighted least squares (WLSQ) approach for the inversion. However, several issues became apparent when applied to the GLODAPv3 dataset, primarily significant regional biases in calculated adjustments. To address these issues, a new inversion algorithm called furthest-first (FF) has been developed for use in GLODAPv3, which has been implemented in a freely available, open-source Python package (xover). Here, we describe the FF approach and test it on simulated datasets and by comparing it to WLSQ, finding that it produces accurate adjustments. We also show how the FF approach can be adapted (i) to avoid the regional biases that appear in WLSQ, (ii) to find an optimal set of adjustments accounting for the fact that some cruises will ultimately not be adjusted, and (iii) to approximately preserve selected trends in the cruise-by-cruise differences. Points (i) and (ii) above are addressed by a two-step variant of the approach denoted FF 2 , which was applied in GLODAPv3. While FF represents a marked improvement on WLSQ for the GLODAP application, no algorithm can completely replace the role of expert judgement in the inversion process, for example when selecting convergence criteria, which cruises are permitted to be adjusted, and which trends should be preserved.

  • Open Access

    Reply to RC2

    by Matthew P. Humphreys, Siv K. Lauvset, Nico Lange, Henry C. Bittig, Brendan R. Carter, Mario Hoppema, Akihiko Murata, Are Olsen, Toste Tanhua, Adam Ulfsbo, et al.

    The global ocean absorbs a significant portion of anthropogenic carbon dioxide (CO2) emissions. Tracking the fate of absorbed CO2 and its impacts requires an internally consistent global observational dataset spanning decades. In the Global Ocean Data Analysis Project (GLODAP), data from disparate research cruises are compared in a secondary quality-control process, adjusted for consistency where necessary and compiled into a data product. Differences between cruises are quantified with a crossover analysis, comparing data at depth (where natural variability is minimal) from nearby sampling stations, and an inversion algorithm calculates a set of adjustments that would minimise these differences globally. The adjustments are reviewed by an expert committee and a subset applied to produce the final data product. The previous major version (GLODAPv2) used a weighted least squares (WLSQ) approach for the inversion. However, several issues became apparent when applied to the GLODAPv3 dataset, primarily significant regional biases in calculated adjustments. To address these issues, a new inversion algorithm called furthest-first (FF) has been developed for use in GLODAPv3, which has been implemented in a freely available, open-source Python package (xover). Here, we describe the FF approach and test it on simulated datasets and by comparing it to WLSQ, finding that it produces accurate adjustments. We also show how the FF approach can be adapted (i) to avoid the regional biases that appear in WLSQ, (ii) to find an optimal set of adjustments accounting for the fact that some cruises will ultimately not be adjusted, and (iii) to approximately preserve selected trends in the cruise-by-cruise differences. Points (i) and (ii) above are addressed by a two-step variant of the approach denoted FF2, which was applied in GLODAPv3. While FF represents a marked improvement on WLSQ for the GLODAP application, no algorithm can completely replace the role of expert judgement in the inversion process, for example when selecting convergence criteria, which cruises are permitted to be adjusted, and which trends should be preserved.

  • Open Access

    Reply to RC1

    by Matthew P. Humphreys, Siv K. Lauvset, Nico Lange, Henry C. Bittig, Brendan R. Carter, Mario Hoppema, Akihiko Murata, Are Olsen, Toste Tanhua, Adam Ulfsbo, et al.

    The global ocean absorbs a significant portion of anthropogenic carbon dioxide (CO2) emissions. Tracking the fate of absorbed CO2 and its impacts requires an internally consistent global observational dataset spanning decades. In the Global Ocean Data Analysis Project (GLODAP), data from disparate research cruises are compared in a secondary quality-control process, adjusted for consistency where necessary and compiled into a data product. Differences between cruises are quantified with a crossover analysis, comparing data at depth (where natural variability is minimal) from nearby sampling stations, and an inversion algorithm calculates a set of adjustments that would minimise these differences globally. The adjustments are reviewed by an expert committee and a subset applied to produce the final data product. The previous major version (GLODAPv2) used a weighted least squares (WLSQ) approach for the inversion. However, several issues became apparent when applied to the GLODAPv3 dataset, primarily significant regional biases in calculated adjustments. To address these issues, a new inversion algorithm called furthest-first (FF) has been developed for use in GLODAPv3, which has been implemented in a freely available, open-source Python package (xover). Here, we describe the FF approach and test it on simulated datasets and by comparing it to WLSQ, finding that it produces accurate adjustments. We also show how the FF approach can be adapted (i) to avoid the regional biases that appear in WLSQ, (ii) to find an optimal set of adjustments accounting for the fact that some cruises will ultimately not be adjusted, and (iii) to approximately preserve selected trends in the cruise-by-cruise differences. Points (i) and (ii) above are addressed by a two-step variant of the approach denoted FF2, which was applied in GLODAPv3. While FF represents a marked improvement on WLSQ for the GLODAP application, no algorithm can completely replace the role of expert judgement in the inversion process, for example when selecting convergence criteria, which cruises are permitted to be adjusted, and which trends should be preserved.

  • Open Access

    Comment on egusphere-2026-3063

    by Matthew P. Humphreys, Siv K. Lauvset, Nico Lange, Henry C. Bittig, Brendan R. Carter, Mario Hoppema, Akihiko Murata, Are Olsen, Toste Tanhua, Adam Ulfsbo, et al.

    The global ocean absorbs a significant portion of anthropogenic carbon dioxide (CO2) emissions. Tracking the fate of absorbed CO2 and its impacts requires an internally consistent global observational dataset spanning decades. In the Global Ocean Data Analysis Project (GLODAP), data from disparate research cruises are compared in a secondary quality-control process, adjusted for consistency where necessary and compiled into a data product. Differences between cruises are quantified with a crossover analysis, comparing data at depth (where natural variability is minimal) from nearby sampling stations, and an inversion algorithm calculates a set of adjustments that would minimise these differences globally. The adjustments are reviewed by an expert committee and a subset applied to produce the final data product. The previous major version (GLODAPv2) used a weighted least squares (WLSQ) approach for the inversion. However, several issues became apparent when applied to the GLODAPv3 dataset, primarily significant regional biases in calculated adjustments. To address these issues, a new inversion algorithm called furthest-first (FF) has been developed for use in GLODAPv3, which has been implemented in a freely available, open-source Python package (xover). Here, we describe the FF approach and test it on simulated datasets and by comparing it to WLSQ, finding that it produces accurate adjustments. We also show how the FF approach can be adapted (i) to avoid the regional biases that appear in WLSQ, (ii) to find an optimal set of adjustments accounting for the fact that some cruises will ultimately not be adjusted, and (iii) to approximately preserve selected trends in the cruise-by-cruise differences. Points (i) and (ii) above are addressed by a two-step variant of the approach denoted FF2, which was applied in GLODAPv3. While FF represents a marked improvement on WLSQ for the GLODAP application, no algorithm can completely replace the role of expert judgement in the inversion process, for example when selecting convergence criteria, which cruises are permitted to be adjusted, and which trends should be preserved.

  • Open Access

    Comment on essd-2026-496

    by Nico Lange, Siv K. Lauvset, Brendan R. Carter, Matthew P. Humphreys, Ryan J. Woosley, Are Olsen, Henry C. Bittig, Alex Kozyr, Marta Álvarez, Kumiko Azetsu-Scott, et al.

    The Global Ocean Data Analysis Project (GLODAP) is a synthesis effort providing surface-to-bottom ocean biogeochemical observations determined through chemical analysis of discrete bottle samples, with an emphasis on seawater inorganic carbon chemistry and related variables. Version 3 of GLODAP comprises data from 1181 cruises, spanning more than 50 years of observations (1972–2023). It includes all data from the previous GLODAPv2.2023 (Lauvset et al., 2024) together with newly added data from 57 cruises. For all cruises, 13 core variables (temperature, salinity, oxygen, nitrate, silicate, phosphate, dissolved inorganic carbon, total alkalinity, CFC-11, CFC-12, CFC-113, CCl₄, and SF6) have undergone extensive quality control with particular focus on the identification and removal of systematic differences between cruises. The data are available in two formats: (i) as submitted by the data originators, converted to World Ocean Circulation Experiment (WOCE) exchange format, and (ii) as a merged data product in which adjustments have been applied. These adjustments were determined using crossover analyses in combination with a newly developed global inversion method, the furthest-first routine. The applied adjustments are intended to remove systematic differences arising from differences in measurement methods, calibration, and/or data-handling practices, while preserving known or likely temporal trends and natural variability. The consistency of the adjusted data product is estimated to be 0.0013 for salinity, 0.7 % for oxygen, 0.4 % for nitrate, 0.5 % for silicate, 0.5 % for phosphate, 1.2 µmol kg⁻¹ for dissolved inorganic carbon, and 1.4 µmol kg⁻¹ for total alkalinity. Consistency estimates could not be derived for transient tracers, but they are believed to be consistent to better than 5 % (10 % for SF₆). The enhanced consistency enables different datasets to be used together with greater confidence. Newly introduced cruise-specific uncertainty estimates for all core variables provide more granular quantifications of remaining cruise-to-cruise inconsistencies. Additional variables, including pH, discrete CO₂ fugacity (fCO₂), isotopic tracers, and others, were not subjected to secondary quality control but are included in the data product. The original data, their documentation (metadata), and DOIs are available through the Ocean Carbon and Acidification Data System (OCADS) of NOAA’s National Centers for Environmental Information (NCEI), which also hosts the merged data product. All secondary quality control decisions and supporting information can be found in the online adjustment table (https://glodapv3.geomar.de, last accesses 26.06.2026). The product is distributed as a single global file and as four regional subsets (Arctic, Atlantic, Indian, and Pacific Oceans) under https://doi.org/10.25921/m6tp-mj50 (Lange et al., 2026). These adjusted files also include ancillary and approximated data obtained through interpolation or calculation from measured data.

  • Open Access

    Supplementary material to "The Global Ocean Data Analysis Project version 3 (GLODAPv3) – an internally consistent biogeochemical data product for the world ocean"

    by Nico Lange, Siv K. Lauvset, Brendan R. Carter, Matthew P. Humphreys, Ryan J. Woosley, Are Olsen, Henry C. Bittig, Alex Kozyr, Marta Álvarez, Kumiko Azetsu-Scott, et al.

  • Open Access

    The Global Ocean Data Analysis Project version 3 (GLODAPv3) – an internally consistent biogeochemical data product for the world ocean

    by Nico Lange, Siv K. Lauvset, Brendan R. Carter, Matthew P. Humphreys, Ryan J. Woosley, Are Olsen, Henry C. Bittig, Alex Kozyr, Marta Álvarez, Kumiko Azetsu-Scott, et al.

    The Global Ocean Data Analysis Project (GLODAP) is a synthesis effort providing surface-to-bottom ocean biogeochemical observations determined through chemical analysis of discrete bottle samples, with an emphasis on seawater inorganic carbon chemistry and related variables. Version 3 of GLODAP comprises data from 1181 cruises, spanning more than 50 years of observations (1972–2023). It includes all data from the previous GLODAPv2.2023 (Lauvset et al., 2024) together with newly added data from 57 cruises. For all cruises, 13 core variables (temperature, salinity, oxygen, nitrate, silicate, phosphate, dissolved inorganic carbon, total alkalinity, CFC-11, CFC-12, CFC-113, CCl₄, and SF6) have undergone extensive quality control with particular focus on the identification and removal of systematic differences between cruises. The data are available in two formats: (i) as submitted by the data originators, converted to World Ocean Circulation Experiment (WOCE) exchange format, and (ii) as a merged data product in which adjustments have been applied. These adjustments were determined using crossover analyses in combination with a newly developed global inversion method, the furthest-first routine. The applied adjustments are intended to remove systematic differences arising from differences in measurement methods, calibration, and/or data-handling practices, while preserving known or likely temporal trends and natural variability. The consistency of the adjusted data product is estimated to be 0.0013 for salinity, 0.7 % for oxygen, 0.4 % for nitrate, 0.5 % for silicate, 0.5 % for phosphate, 1.2 µmol kg⁻¹ for dissolved inorganic carbon, and 1.4 µmol kg⁻¹ for total alkalinity. Consistency estimates could not be derived for transient tracers, but they are believed to be consistent to better than 5 % (10 % for SF₆). The enhanced consistency enables different datasets to be used together with greater confidence. Newly introduced cruise-specific uncertainty estimates for all core variables provide more granular quantifications of remaining cruise-to-cruise inconsistencies. Additional variables, including pH, discrete CO₂ fugacity (fCO₂), isotopic tracers, and others, were not subjected to secondary quality control but are included in the data product. The original data, their documentation (metadata), and DOIs are available through the Ocean Carbon and Acidification Data System (OCADS) of NOAA’s National Centers for Environmental Information (NCEI), which also hosts the merged data product. All secondary quality control decisions and supporting information can be found in the online adjustment table (https://glodapv3.geomar.de, last accesses 26.06.2026). The product is distributed as a single global file and as four regional subsets (Arctic, Atlantic, Indian, and Pacific Oceans) under https://doi.org/10.25921/m6tp-mj50 (Lange et al., 2026). These adjusted files also include ancillary and approximated data obtained through interpolation or calculation from measured data.


  • Open Access

    Comment on egusphere-2026-3063

    by Matthew P. Humphreys, Siv K. Lauvset, Nico Lange, Henry C. Bittig, Brendan R. Carter, Mario Hoppema, Akihiko Murata, Are Olsen, Toste Tanhua, Adam Ulfsbo, et al.

    The global ocean absorbs a significant portion of anthropogenic carbon dioxide (CO2) emissions. Tracking the fate of absorbed CO2 and its impacts requires an internally consistent global observational dataset spanning decades. In the Global Ocean Data Analysis Project (GLODAP), data from disparate research cruises are compared in a secondary quality-control process, adjusted for consistency where necessary and compiled into a data product. Differences between cruises are quantified with a crossover analysis, comparing data at depth (where natural variability is minimal) from nearby sampling stations, and an inversion algorithm calculates a set of adjustments that would minimise these differences globally. The adjustments are reviewed by an expert committee and a subset applied to produce the final data product. The previous major version (GLODAPv2) used a weighted least squares (WLSQ) approach for the inversion. However, several issues became apparent when applied to the GLODAPv3 dataset, primarily significant regional biases in calculated adjustments. To address these issues, a new inversion algorithm called furthest-first (FF) has been developed for use in GLODAPv3, which has been implemented in a freely available, open-source Python package (xover). Here, we describe the FF approach and test it on simulated datasets and by comparing it to WLSQ, finding that it produces accurate adjustments. We also show how the FF approach can be adapted (i) to avoid the regional biases that appear in WLSQ, (ii) to find an optimal set of adjustments accounting for the fact that some cruises will ultimately not be adjusted, and (iii) to approximately preserve selected trends in the cruise-by-cruise differences. Points (i) and (ii) above are addressed by a two-step variant of the approach denoted FF2, which was applied in GLODAPv3. While FF represents a marked improvement on WLSQ for the GLODAP application, no algorithm can completely replace the role of expert judgement in the inversion process, for example when selecting convergence criteria, which cruises are permitted to be adjusted, and which trends should be preserved.

  • Open Access

    Furthest-first inversion for internal consistency adjustments in the biogeochemical data product GLODAPv3

    by Matthew P. Humphreys, Siv K. Lauvset, Nico Lange, Henry C. Bittig, Brendan R. Carter, Mario Hoppema, Akihiko Murata, Are Olsen, Toste Tanhua, Adam Ulfsbo, et al.

    The global ocean absorbs a significant portion of anthropogenic carbon dioxide (CO2) emissions. Tracking the fate of absorbed CO2 and its impacts requires an internally consistent global observational dataset spanning decades. In the Global Ocean Data Analysis Project (GLODAP), data from disparate research cruises are compared in a secondary quality-control process, adjusted for consistency where necessary and compiled into a data product. Differences between cruises are quantified with a crossover analysis, comparing data at depth (where natural variability is minimal) from nearby sampling stations, and an inversion algorithm calculates a set of adjustments that would minimise these differences globally. The adjustments are reviewed by an expert committee and a subset applied to produce the final data product. The previous major version (GLODAPv2) used a weighted least squares (WLSQ) approach for the inversion. However, several issues became apparent when applied to the GLODAPv3 dataset, primarily significant regional biases in calculated adjustments. To address these issues, a new inversion algorithm called furthest-first (FF) has been developed for use in GLODAPv3, which has been implemented in a freely available, open-source Python package (xover). Here, we describe the FF approach and test it on simulated datasets and by comparing it to WLSQ, finding that it produces accurate adjustments. We also show how the FF approach can be adapted (i) to avoid the regional biases that appear in WLSQ, (ii) to find an optimal set of adjustments accounting for the fact that some cruises will ultimately not be adjusted, and (iii) to approximately preserve selected trends in the cruise-by-cruise differences. Points (i) and (ii) above are addressed by a two-step variant of the approach denoted FF2, which was applied in GLODAPv3. While FF represents a marked improvement on WLSQ for the GLODAP application, no algorithm can completely replace the role of expert judgement in the inversion process, for example when selecting convergence criteria, which cruises are permitted to be adjusted, and which trends should be preserved.

  • Open Access

    Meltwater as a Local Source of Ice Nucleating Particles in the Central Arctic Summer

    by C. E. Mavis, M. Vazquez, C. A. Bekemeier, K. R. Barry, E. J. Chamberlain, J. Schmale, T. Jokinen, T. Laurila, M. D. Shupe, C. J. M. Hoppe, et al.

    Identifying sources of ice nucleating particles (INPs) in the central Arctic is important for understanding controls on the phase of Arctic mixed‐phase clouds (AMPCs). We show meltwater samples collected from the Arctic pack ice in July 2020 contain biological INPs active at relatively warm temperatures ( T ≥ −10°C). We attribute the meltwater INPs to organisms and processes unique to a meltwater habitat. Concentrations of biological INPs active at T ≥ −10°C on filters deployed downwind of meltwater sites showed an enhancement associated with surface proximity. We hypothesize that time over the melt‐pond‐covered pack ice may have influenced the higher concentrations of biological INPs on the aerosol filters. More work to resolve emission mechanisms from melt ponds is necessary for understanding the extent of this potential source, which may increase importance as melt seasons extend spatiotemporally.