Adolfo Carlos Iñigo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Adolfo Carlos Iñigo has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Vicente Rives
Departamento de Química Inorgánica, Universidad de Salamanca, 37008 Salamanca, Spain
13 shared publications - Jacinta García-Talegón
Department of Geology University of Salamanca Salamanca Spain
10 shared publications - Santiago Vicente-Tavera
Department of Statistics, Universidad de Salamanca, Salamanca, Spain
9 shared publications J. García-Talegón
Departamento de Geología, Universidad de Salamanca, Salamanca, Spain
5 shared publicationsM. A. Vicente
Postdoctoral Student, IRNA/CSIC, Spain
4 shared publicationsM. J. Holgado
Universidad de Salamanca, Facultad de Farmacia
4 shared publications
Latest Publications
- Open Access
- 22 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Ultrasound propagation speed and mass changes by application of different accelerated artificial ageing tests in granitic materials
In this work the ultrasound propagation speed on the three spatial planes (Vx,Vy,Vz) and the weight loss/gain of three ornamental granites (Ávila, Spain) were determined before, during, and after being subjected to 90 cycles of three types of accelerated ageing processes (typical of cold regions): a) freezing/thawing and cooling/heating, b) salt crystallisation, and c) freezing/thawing and cooling/heating + salt crystallisation. A three-way mixed multivariate analysis of variance (MANOVA) was used for data analysis. Significant variations in the ultrasonic propagation speed and weight loss/gain of the different granites were observed for the three types of accelerated artificial ageing processes compared to the data obtained from the quarry samples, with the Airón Biotitic Granite (G) variety being the most altered granite and the combined freezing/thawing and cooling/heating + salt crystallisation accelerated artificial ageing test being the most damaging. To determine the durability of the different varieties of granite against the accelerated artificial ageing tests studied, the estimated data of compressive strengh, obtained from the ultrasound propagation speed data, were determined, with the Ávila Grey Granite (C) being the most resistant to the ageing tests studied.
- 22 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Open AccessUltrasound propagation speed and mass changes by application of different accelerated artificial ageing tests in granitic materials
In this work the ultrasound propagation speed on the three spatial planes (Vx,Vy,Vz) and the weight loss/gain of three ornamental granites (Ávila, Spain) were determined before, during, and after being subjected to 90 cycles of three types of accelerated ageing processes (typical of cold regions): a) freezing/thawing and cooling/heating, b) salt crystallisation, and c) freezing/thawing and cooling/heating + salt crystallisation. A three-way mixed multivariate analysis of variance (MANOVA) was used for data analysis. Significant variations in the ultrasonic propagation speed and weight loss/gain of the different granites were observed for the three types of accelerated artificial ageing processes compared to the data obtained from the quarry samples, with the Airón Biotitic Granite (G) variety being the most altered granite and the combined freezing/thawing and cooling/heating + salt crystallisation accelerated artificial ageing test being the most damaging. To determine the durability of the different varieties of granite against the accelerated artificial ageing tests studied, the estimated data of compressive strengh, obtained from the ultrasound propagation speed data, were determined, with the Ávila Grey Granite (C) being the most resistant to the ageing tests studied.
- Open Access
- 4 August 2022
- Published by MDPI AG in Chemengineering
- Vol. 6 (4) , 61
Effect of Artificial Freeze/Thaw and Thermal Shock Ageing, Combined or Not with Salt Crystallisation on the Colour of Zamora Building Stones (Spain)
After subjecting Zamora building stones to accelerated ageing tests, colour changes were studied, namely: (a) freezing/thawing and thermal shock (gelifraction and thermoclasty), and (b) combination of freezing/thawing plus thermal shock and salt crystallisation (sulphates or phosphates) (gelifraction, thermoclasty and haloclasty). Zamora building stones are silicified conglomerates (silcretes) from the Cretaceous that show marked colour changes due to the remobilisation of iron oxyhydroxides. In this work, four varieties were: white stone; ochreous stone; white and red stone; and purple stone Their micromorphological characterization (skeleton, weathering plasma and porosity/cutan) is formed of grains and fragments of quartz and quartzite as well as by accesory minerals muscovite and feldspar (more or less altered), and some opaque. Quartz, feldspar and illite/mica were part of the skeleton; kaolinite, iron oxyhydroxides, and CT opal were part of the weathering plasma or cutans; their porosity were 11.7–8.7%. Their chromatic data have been statistically analysed (MANOVA-Biplot). They showed higher variations in ΔE*, ΔL*, Δa* and Δb*on combined freezing/thawing plus thermal shock and sulphates crystallisation leading to rapid alteration of the building stones. Chromatic differences between the other two artificial ageing tests were less evident and were not detected in all samples. The global effect of ageing on the Zamora building stones darkened them and reduced their yellowing. The ochreous stone suffered the least variation and the purple stone the most. This study of the colour by statistical analyse may be of interest for the evaluation and monitoring of stone decay, which is an inexpensive, simple, easy and non-destructive technique.
- 4 August 2022
- Published by MDPI AG in Chemengineering
- Vol. 6 (4) , 61
Open AccessEffect of Artificial Freeze/Thaw and Thermal Shock Ageing, Combined or Not with Salt Crystallisation on the Colour of Zamora Building Stones (Spain)
After subjecting Zamora building stones to accelerated ageing tests, colour changes were studied, namely: (a) freezing/thawing and thermal shock (gelifraction and thermoclasty), and (b) combination of freezing/thawing plus thermal shock and salt crystallisation (sulphates or phosphates) (gelifraction, thermoclasty and haloclasty). Zamora building stones are silicified conglomerates (silcretes) from the Cretaceous that show marked colour changes due to the remobilisation of iron oxyhydroxides. In this work, four varieties were: white stone; ochreous stone; white and red stone; and purple stone Their micromorphological characterization (skeleton, weathering plasma and porosity/cutan) is formed of grains and fragments of quartz and quartzite as well as by accesory minerals muscovite and feldspar (more or less altered), and some opaque. Quartz, feldspar and illite/mica were part of the skeleton; kaolinite, iron oxyhydroxides, and CT opal were part of the weathering plasma or cutans; their porosity were 11.7–8.7%. Their chromatic data have been statistically analysed (MANOVA-Biplot). They showed higher variations in ΔE*, ΔL*, Δa* and Δb*on combined freezing/thawing plus thermal shock and sulphates crystallisation leading to rapid alteration of the building stones. Chromatic differences between the other two artificial ageing tests were less evident and were not detected in all samples. The global effect of ageing on the Zamora building stones darkened them and reduced their yellowing. The ochreous stone suffered the least variation and the purple stone the most. This study of the colour by statistical analyse may be of interest for the evaluation and monitoring of stone decay, which is an inexpensive, simple, easy and non-destructive technique.
- 10 March 2020
- Published by Springer Nature in Archaeological and Anthropological Sciences
- Vol. 12 (4) , 1-7
Evaluation of effectiveness of silicoorganic treatments using hydric properties
- 10 March 2020
- Published by Springer Nature in Archaeological and Anthropological Sciences
- Vol. 12 (4) , 1-7
Evaluation of effectiveness of silicoorganic treatments using hydric properties
- 1 March 2019
- Published by Elsevier in Measurement
- Vol. 136, 745-760
Canonical Biplot as a tool to detect microclimates in the inner and outer parts of El Salvador Church in Seville, Spain
- 1 March 2019
- Published by Elsevier in Measurement
- Vol. 136, 745-760
Canonical Biplot as a tool to detect microclimates in the inner and outer parts of El Salvador Church in Seville, Spain
- 28 May 2017
- Published by Wiley in Color Research & Application
- Vol. 42 (6) , 799-806
Multivariate Gaussian subspatial regression applied to predict the effect of phosphate crystallization aging on the color in silicious conglomerates
A new methodology has been applied to the experimental data obtained about a white siliceous conglomerate from Zamora (Spain), which was subjected to 25 cycles of 2 types of aging [freezing/thawing with cooling/heating (T1) and freezing/thawing with cooling/heating + phosphate crystallization (T2)]. Our model (multivariate Gaussian subspatial regression) allows the behavior and prediction of the chromatic coordinates (L*,a*,b*), including more than 25 cycles, to be analyzed. This model is much more flexible than classical models as it allows multiple variable combinations to be predicted in a dynamic way. The final result showed that the conglomerate experiences darkening, yellowing, and reddening, as the number of cycles increase and that the darkening is much less pronounced in T2 due to phosphate crystallization.
- 28 May 2017
- Published by Wiley in Color Research & Application
- Vol. 42 (6) , 799-806
Multivariate Gaussian subspatial regression applied to predict the effect of phosphate crystallization aging on the color in silicious conglomerates
A new methodology has been applied to the experimental data obtained about a white siliceous conglomerate from Zamora (Spain), which was subjected to 25 cycles of 2 types of aging [freezing/thawing with cooling/heating (T1) and freezing/thawing with cooling/heating + phosphate crystallization (T2)]. Our model (multivariate Gaussian subspatial regression) allows the behavior and prediction of the chromatic coordinates (L*,a*,b*), including more than 25 cycles, to be analyzed. This model is much more flexible than classical models as it allows multiple variable combinations to be predicted in a dynamic way. The final result showed that the conglomerate experiences darkening, yellowing, and reddening, as the number of cycles increase and that the darkening is much less pronounced in T2 due to phosphate crystallization.
- 20 May 2016
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 75 (10) , 925
A laboratory simulation of desalting on calcareous building stone with wet sepiolite
- 20 May 2016
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 75 (10) , 925
A laboratory simulation of desalting on calcareous building stone with wet sepiolite
- 14 March 2016
- Published by University of New Brunswick Libraries - UNB in Geoscience Canada
- Vol. 43 (1) , 53-62
Heritage Stone 5. Silicified Granites (Bleeding Stone and Ochre Granite) as Global Heritage Stone Resources from Ávila, Central Spain
Silicified granites were used to build the Romanesque monuments in the city of Ávila, Spain. The building stones comprise two types of granite based on their technical properties and colour: Bleeding Stone (Piedra Sangrante) and Ochre Granite (Caleño). They were used as a facing stone in the city´s Romanesque monuments of the 12th century (e.g. the cathedral and church of San Pedro), and the famous city walls that constitute the best example of military Romanesque Spanish architecture. During the Gothic and Renaissance periods of the 13th and 15th centuries, silicified granites were used mainly to build ribbed vaults, the voissoirs of the arches, and elements of the windows in the monuments of Ávila. Silicified granites are found in the intermediate and upper part of a complex palaeoweathering zone or mantle developed on the Iberian Hercynian Basement which underlies much of the western Iberian Peninsula. The silicification occurred during tropical conditions in the Mesozoic. The weathered mantle was truncated by Alpine tectonic movements during the Tertiary, and its remnants were unconformably overlain by more recent sediments in the western and southern part of the Duero Basin and along the northern edge of the Amblés Valley graben. The historical, and now protected, quarry is located in a village called La Colilla, about 5 km from the city of Ávila. Currently, this stone is exploited only for restoration work performed in the city, for example the Walls of Ávila, and the church of San Pedro. The resource is limited and being depleted, so the stone will be scarce in the near future. Consequently, these silicified granites should be recognized as a Global Heritage Stone Resource. The specific technical properties of these stones and their historic use, decay patterns, durability, and suitability for conservation treatments combine to support its designation as a Global Heritage Stone Resource.RÉSUMÉDes granites silicifiés ont été utilisés pour construire les monuments romans dans la ville d’Ávila, en Espagne. Les pierres de construction comprennent deux types de granite selon leurs propriétés techniques et leur couleur : Bleeding Stone (Piedra sangrante) et Ochre Granite (Caleño). Ils ont été utilisés comme pierre de revêtement de monuments romans du 12ème siècle de la ville (par exemple la cathédrale et de l'église de San Pedro), et pour les célèbres remparts de la ville qui constituent le meilleur exemple de l'architecture espagnole romane militaire. Durant les périodes gothique et Renaissance des 13e et 15e siècles, les granites silicifiés ont été utilisés principalement pour construire des croisés d'ogives, des voussoirs d’arcs et des éléments de fenêtres des monuments d’Ávila. Les granites silicifiés se trouvent dans la partie intermédiaire et supérieure d'une zone complexe de paléo-altération ou de manteau développée sur le socle ibérique hercynien qui supporte une grande partie de la péninsule ibérique occidentale. La silicification s’est produite dans des conditions tropicales au Mésozoïque. Le matériau mantélique altéré a été tronqué par des mouvements tectoniques alpins au cours du Tertiaire, et ses restes ont été recouverts en discordance par des sédiments plus récents dans la partie ouest et sud du bassin de Duero, et le long de la bordure nord de la vallée en graben d’Amblés. L’ancienne carrière, maintenant protégée, est située dans un village appelé La Colilla, à environ 5 km de la ville d’Ávila. Actuellement, cette pierre est exploitée uniquement pour les travaux de restauration effectués dans la ville, par exemple les murs d’Ávila, et l'église de San Pedro. La ressource est limitée et en voie d'épuisement, de sorte que la pierre sera rare dans un proche avenir. Par conséquent, ces granites silicifiés devraient être reconnus en tant que pierre du Patrimoine mondial des ressources en pierre. Les propriétés techniques spécifiques de ces pierres et leur valeur historique, leurs modes de désintégration, leur durabilité et leur pertinence pour la conservation patrimoniale justifient leur désignation en tant que roche du Patrimoine mondial des ressources en pierre. Traduit par le Traducteur
- 14 March 2016
- Published by University of New Brunswick Libraries - UNB in Geoscience Canada
- Vol. 43 (1) , 53-62
Heritage Stone 5. Silicified Granites (Bleeding Stone and Ochre Granite) as Global Heritage Stone Resources from Ávila, Central Spain
Silicified granites were used to build the Romanesque monuments in the city of Ávila, Spain. The building stones comprise two types of granite based on their technical properties and colour: Bleeding Stone (Piedra Sangrante) and Ochre Granite (Caleño). They were used as a facing stone in the city´s Romanesque monuments of the 12th century (e.g. the cathedral and church of San Pedro), and the famous city walls that constitute the best example of military Romanesque Spanish architecture. During the Gothic and Renaissance periods of the 13th and 15th centuries, silicified granites were used mainly to build ribbed vaults, the voissoirs of the arches, and elements of the windows in the monuments of Ávila. Silicified granites are found in the intermediate and upper part of a complex palaeoweathering zone or mantle developed on the Iberian Hercynian Basement which underlies much of the western Iberian Peninsula. The silicification occurred during tropical conditions in the Mesozoic. The weathered mantle was truncated by Alpine tectonic movements during the Tertiary, and its remnants were unconformably overlain by more recent sediments in the western and southern part of the Duero Basin and along the northern edge of the Amblés Valley graben. The historical, and now protected, quarry is located in a village called La Colilla, about 5 km from the city of Ávila. Currently, this stone is exploited only for restoration work performed in the city, for example the Walls of Ávila, and the church of San Pedro. The resource is limited and being depleted, so the stone will be scarce in the near future. Consequently, these silicified granites should be recognized as a Global Heritage Stone Resource. The specific technical properties of these stones and their historic use, decay patterns, durability, and suitability for conservation treatments combine to support its designation as a Global Heritage Stone Resource.RÉSUMÉDes granites silicifiés ont été utilisés pour construire les monuments romans dans la ville d’Ávila, en Espagne. Les pierres de construction comprennent deux types de granite selon leurs propriétés techniques et leur couleur : Bleeding Stone (Piedra sangrante) et Ochre Granite (Caleño). Ils ont été utilisés comme pierre de revêtement de monuments romans du 12ème siècle de la ville (par exemple la cathédrale et de l'église de San Pedro), et pour les célèbres remparts de la ville qui constituent le meilleur exemple de l'architecture espagnole romane militaire. Durant les périodes gothique et Renaissance des 13e et 15e siècles, les granites silicifiés ont été utilisés principalement pour construire des croisés d'ogives, des voussoirs d’arcs et des éléments de fenêtres des monuments d’Ávila. Les granites silicifiés se trouvent dans la partie intermédiaire et supérieure d'une zone complexe de paléo-altération ou de manteau développée sur le socle ibérique hercynien qui supporte une grande partie de la péninsule ibérique occidentale. La silicification s’est produite dans des conditions tropicales au Mésozoïque. Le matériau mantélique altéré a été tronqué par des mouvements tectoniques alpins au cours du Tertiaire, et ses restes ont été recouverts en discordance par des sédiments plus récents dans la partie ouest et sud du bassin de Duero, et le long de la bordure nord de la vallée en graben d’Amblés. L’ancienne carrière, maintenant protégée, est située dans un village appelé La Colilla, à environ 5 km de la ville d’Ávila. Actuellement, cette pierre est exploitée uniquement pour les travaux de restauration effectués dans la ville, par exemple les murs d’Ávila, et l'église de San Pedro. La ressource est limitée et en voie d'épuisement, de sorte que la pierre sera rare dans un proche avenir. Par conséquent, ces granites silicifiés devraient être reconnus en tant que pierre du Patrimoine mondial des ressources en pierre. Les propriétés techniques spécifiques de ces pierres et leur valeur historique, leurs modes de désintégration, leur durabilité et leur pertinence pour la conservation patrimoniale justifient leur désignation en tant que roche du Patrimoine mondial des ressources en pierre. Traduit par le Traducteur
- Open Access
- 19 February 2015
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XL-5/W4, 445-451
ASSESSING PATHOLOGIES ON VILLAMAYOR STONE (SALAMANCA, SPAIN) BY TERRESTRIAL LASER SCANNER INTENSITY DATA
This paper deals with the assessing of pathologies in façades using a variety of intensity data provided by different terrestrial laser scanner. In particular, a complex building built in the Villamayor Stone that is to be candidate as a Global Heritage Stone Resource has been chosen as study case. The Villamayor Stone were quarrying for the construction and ornamentation of monuments in Salamanca, declared World Heritage City by UNESCO in 1988. The objective of this paper is to assess the pathologies of Villamayor Stone and compare the results obtained through the laser techniques with the classical techniques of mapped pathologies (i.e. visual inspection). For that intensity data coming from laser scanners will be used as non-destructive techniques applied to the façades and several retired plaques (after of building restoration) of Villamayor Stone with pathologies (fissures, scales, loss of matter, humidity/biological colonization) carried to the laboratory. Subsequently it will perform different comparisons between the accuracy reached with the different sensors and a high precision model setup on laboratory which performs as “ground truth”. In particular, the following objectives will be pursued: i) accuracy assessment of the results obtained in in situ and laboratory; ii) an automation or semi-automation of the detection of pathologies in Villamayor Stone; iii) discriminate the different types of Villamayor Stone used in the façades in function of the radiometric response; iv) establish a methodology for detection and assessing of pathologies based on laser scanner intensity data applied to monuments and modern buildings built in Villamayor Stone.
- 19 February 2015
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XL-5/W4, 445-451
Open AccessASSESSING PATHOLOGIES ON VILLAMAYOR STONE (SALAMANCA, SPAIN) BY TERRESTRIAL LASER SCANNER INTENSITY DATA
This paper deals with the assessing of pathologies in façades using a variety of intensity data provided by different terrestrial laser scanner. In particular, a complex building built in the Villamayor Stone that is to be candidate as a Global Heritage Stone Resource has been chosen as study case. The Villamayor Stone were quarrying for the construction and ornamentation of monuments in Salamanca, declared World Heritage City by UNESCO in 1988. The objective of this paper is to assess the pathologies of Villamayor Stone and compare the results obtained through the laser techniques with the classical techniques of mapped pathologies (i.e. visual inspection). For that intensity data coming from laser scanners will be used as non-destructive techniques applied to the façades and several retired plaques (after of building restoration) of Villamayor Stone with pathologies (fissures, scales, loss of matter, humidity/biological colonization) carried to the laboratory. Subsequently it will perform different comparisons between the accuracy reached with the different sensors and a high precision model setup on laboratory which performs as “ground truth”. In particular, the following objectives will be pursued: i) accuracy assessment of the results obtained in in situ and laboratory; ii) an automation or semi-automation of the detection of pathologies in Villamayor Stone; iii) discriminate the different types of Villamayor Stone used in the façades in function of the radiometric response; iv) establish a methodology for detection and assessing of pathologies based on laser scanner intensity data applied to monuments and modern buildings built in Villamayor Stone.
- 27 November 2014
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 407 (1) , 109-120
Villamayor Stone (Golden Stone) as a Global Heritage Stone Resource from Salamanca (NW of Spain)
Villamayor Stone (VS) is an arkosic stone and is known by several names: (i) VS because the quarries are located in Villamayor de Armuña village (Salamanca, Spain); (ii) Golden Stone due to its patina, which gives the stone a ochreous/golden colour; (iii) Franca Stone is known locally and in historical documents. VS has several varieties ranging from channel to floodplain facies. In this work, we have selected three varieties. VS was quarried and used in the construction of Romanesque monuments such as the Old Cathedral, Gothic monuments including the New Cathedral and the University façade, and Baroque monuments, notably the Main Square. Also, VS was used in the reconstruction of the Roman Bridge (Salamanca, Spain). Currently, VS is quarried by a small number of family businesses, using traditional methods for cladding façades of new buildings. Unfortunately, part of the construction sector went bankrupt in the 2008 crisis. However, VS is still the main stone used in the city of Salamanca for the restoration of monuments, even though used in relatively small quantities in comparison with usage before the economic crisis. It is thus of great importance for future generations that their quarries and the craft of masonry be protected. This work proposes that VS should be designated as a Global Heritage Stone Resource.
- 27 November 2014
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 407 (1) , 109-120
Villamayor Stone (Golden Stone) as a Global Heritage Stone Resource from Salamanca (NW of Spain)
Villamayor Stone (VS) is an arkosic stone and is known by several names: (i) VS because the quarries are located in Villamayor de Armuña village (Salamanca, Spain); (ii) Golden Stone due to its patina, which gives the stone a ochreous/golden colour; (iii) Franca Stone is known locally and in historical documents. VS has several varieties ranging from channel to floodplain facies. In this work, we have selected three varieties. VS was quarried and used in the construction of Romanesque monuments such as the Old Cathedral, Gothic monuments including the New Cathedral and the University façade, and Baroque monuments, notably the Main Square. Also, VS was used in the reconstruction of the Roman Bridge (Salamanca, Spain). Currently, VS is quarried by a small number of family businesses, using traditional methods for cladding façades of new buildings. Unfortunately, part of the construction sector went bankrupt in the 2008 crisis. However, VS is still the main stone used in the city of Salamanca for the restoration of monuments, even though used in relatively small quantities in comparison with usage before the economic crisis. It is thus of great importance for future generations that their quarries and the craft of masonry be protected. This work proposes that VS should be designated as a Global Heritage Stone Resource.