Jeffrey Taylor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jeffrey Taylor has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Xuesong Zhou
6 shared publicationsHao Lei
3 shared publicationsNagui M. Rouphail
2 shared publicationsRichard J. Porter
VHB Inc., Venture I, Main Campus Drive, Suite, Raleigh, NC, USA
2 shared publicationsTao Xing
2 shared publications- Xiaoyue Cathy Liu
Univ. of Utah
2 shared publications
Latest Publications
- 1 February 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part A: Systems
- Vol. 148 (2) , 04021108
Empirical Verification of Car-Following Parameters Using Naturalistic Driving Data on Freeway Segments
Microscopic traffic simulation is a well-established tool for the analysis of transportation systems, with a wide variety of applications in operations, safety, and planning. An essential component of traffic simulation is the car-following model, which defines how vehicles interact with each other and controls acceleration/deceleration to maintain a desired set of speeds and distances when constrained by a leading vehicle. Car-following models are governed by a set of parameters that define the car’s following behavior and can accommodate a range of values to reproduce desired conditions. Typically, calibration of a simulation scenario is conducted to approach a set of target macroscopic traffic condition indicators, such as speed, travel time, or queue, yet it rarely considers the accuracy of individual vehicle behavior, in part due to lack of detailed field data. In this paper, Naturalistic driving study (NDS) data sets were used to extract driving behavior on freeway segments at the microscopic level and directly characterize parameters in car-following models. The data extraction process is described, and the parameter values are illustrated for the Wiedemann 99 model implemented in commerically available software. Results highlight similarities and differences of these parameter values observed in the field and those by default in the software, and simulation outcomes upon NDS guided adjustment were analyzed. The process introduced can be expanded to similar data sets and other complex traffic conditions and therefore produce more accurate simulation results not only for metrics at a macroscopic level, but also for individual vehicle trajectories that closely mimic real-world driving.
- 1 February 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part A: Systems
- Vol. 148 (2) , 04021108
Empirical Verification of Car-Following Parameters Using Naturalistic Driving Data on Freeway Segments
Microscopic traffic simulation is a well-established tool for the analysis of transportation systems, with a wide variety of applications in operations, safety, and planning. An essential component of traffic simulation is the car-following model, which defines how vehicles interact with each other and controls acceleration/deceleration to maintain a desired set of speeds and distances when constrained by a leading vehicle. Car-following models are governed by a set of parameters that define the car’s following behavior and can accommodate a range of values to reproduce desired conditions. Typically, calibration of a simulation scenario is conducted to approach a set of target macroscopic traffic condition indicators, such as speed, travel time, or queue, yet it rarely considers the accuracy of individual vehicle behavior, in part due to lack of detailed field data. In this paper, Naturalistic driving study (NDS) data sets were used to extract driving behavior on freeway segments at the microscopic level and directly characterize parameters in car-following models. The data extraction process is described, and the parameter values are illustrated for the Wiedemann 99 model implemented in commerically available software. Results highlight similarities and differences of these parameter values observed in the field and those by default in the software, and simulation outcomes upon NDS guided adjustment were analyzed. The process introduced can be expanded to similar data sets and other complex traffic conditions and therefore produce more accurate simulation results not only for metrics at a macroscopic level, but also for individual vehicle trajectories that closely mimic real-world driving.
- 2 November 2018
- Published by Taylor & Francis in Journal of Intelligent Transportation Systems
- Vol. 22 (6) , 530-546
Using trajectory data to explore roadway characterization for bikeshare network
The rapid expansion of bikeshare programs nationwide provides opportunities to gain insights on the optimal development of multimodal networks and bike-friendly environments. The profusion of trajectory-level data produced by bikeshare systems allows for information extraction on users' route preferences and, if modeled properly, will lead to a greater understanding of road characteristics that are appealing to bikeshare users. Leveraging Global Positioning System (GPS) data obtained from the GREENbike program, this study proposes a method to characterize roadways (e.g. collector, peripheral road, attractive road, and local road) on the basis of a variety of network centrality functions. The methodology is able to uncover the structure of the underlying transportation network and identify locations of critical bicycle infrastructures. A series of centrality measures, including degree, shortest-path betweenness, and random-walk betweenness centrality are implemented to determine the roadway classifications. Their suitability and usability for this purpose is then explored and discussed at length through a sensitivity analysis. The method can be applied to any bikeshare system that has access to trajectory-level (i.e. GPS, crowdsourcing) data for identifying road attributes that are appealing to bike users. Results can effectively guide future investment choices.
- 2 November 2018
- Published by Taylor & Francis in Journal of Intelligent Transportation Systems
- Vol. 22 (6) , 530-546
Using trajectory data to explore roadway characterization for bikeshare network
The rapid expansion of bikeshare programs nationwide provides opportunities to gain insights on the optimal development of multimodal networks and bike-friendly environments. The profusion of trajectory-level data produced by bikeshare systems allows for information extraction on users' route preferences and, if modeled properly, will lead to a greater understanding of road characteristics that are appealing to bikeshare users. Leveraging Global Positioning System (GPS) data obtained from the GREENbike program, this study proposes a method to characterize roadways (e.g. collector, peripheral road, attractive road, and local road) on the basis of a variety of network centrality functions. The methodology is able to uncover the structure of the underlying transportation network and identify locations of critical bicycle infrastructures. A series of centrality measures, including degree, shortest-path betweenness, and random-walk betweenness centrality are implemented to determine the roadway classifications. Their suitability and usability for this purpose is then explored and discussed at length through a sensitivity analysis. The method can be applied to any bikeshare system that has access to trajectory-level (i.e. GPS, crowdsourcing) data for identifying road attributes that are appealing to bike users. Results can effectively guide future investment choices.
- 1 March 2015
- Published by Elsevier in Transportation Research Part B: Methodological
- Vol. 73, 59-80
Method for investigating intradriver heterogeneity using vehicle trajectory data: A Dynamic Time Warping approach
- 1 March 2015
- Published by Elsevier in Transportation Research Part B: Methodological
- Vol. 73, 59-80
Method for investigating intradriver heterogeneity using vehicle trajectory data: A Dynamic Time Warping approach
- Open Access
- 9 January 2015
- Published by Taylor & Francis in Cogent Engineering
- Vol. 2 (1)
Characterizing corridor-level travel time distributions based on stochastic flows and segment capacities
Trip travel time reliability is an important measure of transportation system performance and a key factor affecting travelers’ choices. This paper explores a method for estimating travel time distributions for corridors that contain multiple bottlenecks. A set of analytical equations are used to calculate the number of queued vehicles ahead of a probe vehicle and further capture many important factors affecting travel times: the prevailing congestion level, queue discharge rates at the bottlenecks, and flow rates associated with merges and diverges. Based on multiple random scenarios and a vector of arrival times, the lane-by-lane delay at each bottleneck along the corridor is recursively estimated to produce a route-level travel time distribution. The model incorporates stochastic variations of bottleneck capacity and demand and explains the travel time correlations between sequential links. Its data needs are the entering and exiting flow rates and a sense of the lane-by-lane distribution of traffic at each bottleneck. A detailed vehicle trajectory data-set from the Next Generation SIMulation (NGSIM) project has been used to verify that the estimated distributions are valid, and the sources of estimation error are examined.The final version of this article, as published in Cogent Engineering, can be viewed online at: https://www.cogentoa.com/article/10.1080/23311916.2014.99067
- 9 January 2015
- Published by Taylor & Francis in Cogent Engineering
- Vol. 2 (1)
Open AccessCharacterizing corridor-level travel time distributions based on stochastic flows and segment capacities
Trip travel time reliability is an important measure of transportation system performance and a key factor affecting travelers’ choices. This paper explores a method for estimating travel time distributions for corridors that contain multiple bottlenecks. A set of analytical equations are used to calculate the number of queued vehicles ahead of a probe vehicle and further capture many important factors affecting travel times: the prevailing congestion level, queue discharge rates at the bottlenecks, and flow rates associated with merges and diverges. Based on multiple random scenarios and a vector of arrival times, the lane-by-lane delay at each bottleneck along the corridor is recursively estimated to produce a route-level travel time distribution. The model incorporates stochastic variations of bottleneck capacity and demand and explains the travel time correlations between sequential links. Its data needs are the entering and exiting flow rates and a sense of the lane-by-lane distribution of traffic at each bottleneck. A detailed vehicle trajectory data-set from the Next Generation SIMulation (NGSIM) project has been used to verify that the estimated distributions are valid, and the sources of estimation error are examined.The final version of this article, as published in Cogent Engineering, can be viewed online at: https://www.cogentoa.com/article/10.1080/23311916.2014.99067
- 1 January 2015
- Published by Elsevier in Transportation Research Part C: Emerging Technologies
- Vol. 50, 117-129
Estimating risk effects of driving distraction: A dynamic errorable car-following model
- 1 January 2015
- Published by Elsevier in Transportation Research Part C: Emerging Technologies
- Vol. 50, 117-129
Estimating risk effects of driving distraction: A dynamic errorable car-following model
- Open Access
- 1 October 2014
- Published by Taylor & Francis in Cogent Engineering
- Vol. 1 (1)
DTALite: A queue-based mesoscopic traffic simulator for fast model evaluation and calibration
A number of emerging dynamic traffic analysis applications, such as regional or statewide traffic assignment, require a theoretically rigorous and computationally efficient model to describe the propagation and dissipation of system congestion with bottleneck capacity constraints. An open-source light-weight dynamic traffic assignment (DTA) package, namely DTALite, has been developed to allow a rapid utilization of advanced dynamic traffic analysis capabilities. This paper describes its three major modeling components: (1) a light-weight dynamic network loading simulator that embeds Newell’s simplified kinematic wave model; (2) a mesoscopic agent-based DTA procedure to incorporate driver’s heterogeneity; and (3) an integrated traffic assignment and origin–destination demand calibration system that can iteratively adjust path flow volume and distribution to match the observed traffic counts. A number of real-world test cases are described to demonstrate the effectiveness and performance of the proposed models under different network and data availability conditions.The final version of this article, as published in Cogent Engineering, can be viewed online at: https://www.cogentoa.com/article/10.1080/23311916.2014.96134
- 1 October 2014
- Published by Taylor & Francis in Cogent Engineering
- Vol. 1 (1)
Open AccessDTALite: A queue-based mesoscopic traffic simulator for fast model evaluation and calibration
A number of emerging dynamic traffic analysis applications, such as regional or statewide traffic assignment, require a theoretically rigorous and computationally efficient model to describe the propagation and dissipation of system congestion with bottleneck capacity constraints. An open-source light-weight dynamic traffic assignment (DTA) package, namely DTALite, has been developed to allow a rapid utilization of advanced dynamic traffic analysis capabilities. This paper describes its three major modeling components: (1) a light-weight dynamic network loading simulator that embeds Newell’s simplified kinematic wave model; (2) a mesoscopic agent-based DTA procedure to incorporate driver’s heterogeneity; and (3) an integrated traffic assignment and origin–destination demand calibration system that can iteratively adjust path flow volume and distribution to match the observed traffic counts. A number of real-world test cases are described to demonstrate the effectiveness and performance of the proposed models under different network and data availability conditions.The final version of this article, as published in Cogent Engineering, can be viewed online at: https://www.cogentoa.com/article/10.1080/23311916.2014.96134
- 1 January 2012
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2291 (1) , 35-43
Monitoring Travel Time Reliability from the Cloud
Under the existing loosely distributed sensor environment with heterogeneous data sources, transportation planning and management agencies have found a critical need for the efficient storage, processing, and extraction of network-level information. The emerging practice of cloud computing provides a revolutionary solution for network-level information needs. This paper introduces MapReduce, a distributed computing framework for the design of data-intensive software systems that can manage and manipulate a large volume of data. With a focus on a traffic-oriented, data-intensive application, the researchers designed and implemented a system for the provision of traveler information based on travel time reliability. The system leverages the unified data storage and computing platform provided by the cloud computing architecture.
- 1 January 2012
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2291 (1) , 35-43
Monitoring Travel Time Reliability from the Cloud
Under the existing loosely distributed sensor environment with heterogeneous data sources, transportation planning and management agencies have found a critical need for the efficient storage, processing, and extraction of network-level information. The emerging practice of cloud computing provides a revolutionary solution for network-level information needs. This paper introduces MapReduce, a distributed computing framework for the design of data-intensive software systems that can manage and manipulate a large volume of data. With a focus on a traffic-oriented, data-intensive application, the researchers designed and implemented a system for the provision of traveler information based on travel time reliability. The system leverages the unified data storage and computing platform provided by the cloud computing architecture.
- Open Access
Locating Sensors for Detecting Source-to-Target Patterns of Special Nuclear Material Smuggling: A Spatial Information Theoretic Approach
In this paper, a spatial information-theoretic model is proposed to locate sensors for detecting source-to-target patterns of special nuclear material (SNM) smuggling. In order to ship the nuclear materials from a source location with SNM production to a target city, the smugglers must employ global and domestic logistics systems. This paper focuses on locating a limited set of fixed and mobile radiation sensors in a transportation network, with the intent to maximize the expected information gain and minimize the estimation error for the subsequent nuclear material detection stage. A Kalman filtering-based framework is adapted to assist the decision-maker in quantifying the network-wide information gain and SNM flow estimation accuracy.
Open AccessLocating Sensors for Detecting Source-to-Target Patterns of Special Nuclear Material Smuggling: A Spatial Information Theoretic Approach
In this paper, a spatial information-theoretic model is proposed to locate sensors for detecting source-to-target patterns of special nuclear material (SNM) smuggling. In order to ship the nuclear materials from a source location with SNM production to a target city, the smugglers must employ global and domestic logistics systems. This paper focuses on locating a limited set of fixed and mobile radiation sensors in a transportation network, with the intent to maximize the expected information gain and minimize the estimation error for the subsequent nuclear material detection stage. A Kalman filtering-based framework is adapted to assist the decision-maker in quantifying the network-wide information gain and SNM flow estimation accuracy.