Rehan Kapadia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rehan Kapadia has a total of 150 co-authors. Here are the top co-authors by number of shared publications:
- Ragib Ahsan
Department of Electrical and Computer Engineering
17 shared publications - Hyun Uk Chae
Department of Electrical and Computer Engineering, University of Southern California, Los Angeles, California 90089, United States
11 shared publications - Debarghya Sarkar
Ming Hsieh Department of Electrical and Computer Engineering, University of Southern California, Los Angeles, California 90089, United States
8 shared publications - Jayakanth Ravichandran
Mork Family Department of Chemical Engineering and Materials Science University of Southern California Los Angeles California USA
7 shared publications - Stephen B. Cronin
University of Southern California
7 shared publications Fatemeh Rezaeifar
Ming Hsieh Department of Electrical and Computer Engineering, University of Southern California , Los Angeles, California 90089, USA
6 shared publications
Latest Publications
- 16 June 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (23)
Integration of oscillator-based feature extraction for energy-efficient convolutional neural networks
The rapid growth in machine learning and artificial intelligence workloads has increased the demand for computing power. Although digital computing accelerators dominate today’s market, analog computing architectures are emerging as promising energy-efficient alternatives. In this work, we propose an approach to address these challenges by replacing the first layer of a convolutional neural network (CNN) with a network of oscillatory retinal neurons (ORNs) composed of weakly coupled, optically activated negative differential resistance (NDR) devices. Each ORN consists of a photodetector exhibiting NDR behavior under illumination, coupled with an inductor forming a self-oscillating circuit without needing external voltage sources. We model the nonlinear oscillator dynamics using experimentally measured device characteristics and simulate their behavior under varying optical inputs. Simulations performed on the Fashion-MNIST (Modified National Institute of Standards and Technology) dataset demonstrate that the hybrid ORN–CNN architecture maintains high recognition accuracy and achieves 95% training accuracy and 92% testing accuracy comparable to the fully software-defined CNN with 93% test accuracy while dramatically reducing energy consumption to 24 aJ/operation. Different ORN network topologies were investigated, with asymmetric inductive coupling achieving consistently high performance. These results highlight the potential of oscillator-based networks for low-power analog computing and demonstrate the possibility of using nonlinear physical systems for energy-efficient machine learning applications. This work demonstrates a possible path for integrating device-level oscillator dynamics into future neuromorphic and analog computing platforms.
- 16 June 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (23)
Integration of oscillator-based feature extraction for energy-efficient convolutional neural networks
The rapid growth in machine learning and artificial intelligence workloads has increased the demand for computing power. Although digital computing accelerators dominate today’s market, analog computing architectures are emerging as promising energy-efficient alternatives. In this work, we propose an approach to address these challenges by replacing the first layer of a convolutional neural network (CNN) with a network of oscillatory retinal neurons (ORNs) composed of weakly coupled, optically activated negative differential resistance (NDR) devices. Each ORN consists of a photodetector exhibiting NDR behavior under illumination, coupled with an inductor forming a self-oscillating circuit without needing external voltage sources. We model the nonlinear oscillator dynamics using experimentally measured device characteristics and simulate their behavior under varying optical inputs. Simulations performed on the Fashion-MNIST (Modified National Institute of Standards and Technology) dataset demonstrate that the hybrid ORN–CNN architecture maintains high recognition accuracy and achieves 95% training accuracy and 92% testing accuracy comparable to the fully software-defined CNN with 93% test accuracy while dramatically reducing energy consumption to 24 aJ/operation. Different ORN network topologies were investigated, with asymmetric inductive coupling achieving consistently high performance. These results highlight the potential of oscillator-based networks for low-power analog computing and demonstrate the possibility of using nonlinear physical systems for energy-efficient machine learning applications. This work demonstrates a possible path for integrating device-level oscillator dynamics into future neuromorphic and analog computing platforms.
- Open Access
- 7 February 2026
- Published by Elsevier in SSRN Electronic Journal
Charge Mobility Characterization of Organic Photoconductors Using Organic Thin-Film Transistor Arrays
Organic photoconductors are emerging as a fundamental material system for applications in solar energy, integrated photonics, and photodetectors. Their utility is determined by their light-induced charge carrier mobility, which is governed by their molecular structure, their interactions with adjacent molecules, and their environment. The increasing variety of organic semiconductors calls for the development of high-throughput methods to accelerate the characterization of their charge transport properties. In this study, we characterize the photoconductive behavior of Bis(2-methyl-8-hydroxyquinalinato)(4-hydroxybiphenylenato)aluminium(III) (BAlq) using arrays of 3-terminal organic thin-film transistors (OTFT) on silicon. Under varying ultraviolet irradiance and gate-source biases, the electric drain current was observed to increase proportionally with the illuminance, and the effective mobility was calculated to be 0.017 cm2 V-1 s-1. This result agrees well with density functional theory (DFT) calculations and is comparable to other well-studied organic semiconductors. This organic nanoelectronics approach offers a rapid method for evaluating the photoconductive properties of organic thin films.
- 7 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCharge Mobility Characterization of Organic Photoconductors Using Organic Thin-Film Transistor Arrays
Organic photoconductors are emerging as a fundamental material system for applications in solar energy, integrated photonics, and photodetectors. Their utility is determined by their light-induced charge carrier mobility, which is governed by their molecular structure, their interactions with adjacent molecules, and their environment. The increasing variety of organic semiconductors calls for the development of high-throughput methods to accelerate the characterization of their charge transport properties. In this study, we characterize the photoconductive behavior of Bis(2-methyl-8-hydroxyquinalinato)(4-hydroxybiphenylenato)aluminium(III) (BAlq) using arrays of 3-terminal organic thin-film transistors (OTFT) on silicon. Under varying ultraviolet irradiance and gate-source biases, the electric drain current was observed to increase proportionally with the illuminance, and the effective mobility was calculated to be 0.017 cm2 V-1 s-1. This result agrees well with density functional theory (DFT) calculations and is comparable to other well-studied organic semiconductors. This organic nanoelectronics approach offers a rapid method for evaluating the photoconductive properties of organic thin films.
- Open Access
- 12 November 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (24)
Data Driven Control of Defect Formation in Solution Deposited Sb 2 Se 3 Thin Films
Semiconductor thin films are foundational to a broad range of optoelectronic technologies. Solution deposition offers a low‐cost, energy‐efficient alternative to vapor‐based methods, but its practical scalability is hindered by poor reproducibility and high defect densities arising from complex interdependencies among processing variables. Statistical design of experiments (DoE) enables critical insight into the non‐intuitive interdependencies that are not accessible by conventional one‐variable‐at‐a‐time (OVAT) approaches. Using Sb 2 Se 3 as an example semiconductor, DoE is employed with a central composite design (CCD) to systematically vary six processing parameters encompassing ink formulation and deposition parameters. From only 77 experiments, predictive models are constructed for four macro‐ and microscopic defect types known to interrupt charge transport. All six variables are found to significantly and synergistically influence film quality and are optimized to minimize defect density. Importantly, the optimal film exhibited a threefold enhancement in photoresponse in single‐junction devices with no detectable change in composition, nanostructure, or film stability, implicating defect suppression as the critical driver of improved performance. This work highlights DoE as a powerful methodology for uncovering latent structure–processing–property relationships in thin films and provides a general framework for accelerating the development of optoelectronic‐grade materials via solution processing.
- 12 November 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (24)
Open AccessData Driven Control of Defect Formation in Solution Deposited Sb 2 Se 3 Thin Films
Semiconductor thin films are foundational to a broad range of optoelectronic technologies. Solution deposition offers a low‐cost, energy‐efficient alternative to vapor‐based methods, but its practical scalability is hindered by poor reproducibility and high defect densities arising from complex interdependencies among processing variables. Statistical design of experiments (DoE) enables critical insight into the non‐intuitive interdependencies that are not accessible by conventional one‐variable‐at‐a‐time (OVAT) approaches. Using Sb 2 Se 3 as an example semiconductor, DoE is employed with a central composite design (CCD) to systematically vary six processing parameters encompassing ink formulation and deposition parameters. From only 77 experiments, predictive models are constructed for four macro‐ and microscopic defect types known to interrupt charge transport. All six variables are found to significantly and synergistically influence film quality and are optimized to minimize defect density. Importantly, the optimal film exhibited a threefold enhancement in photoresponse in single‐junction devices with no detectable change in composition, nanostructure, or film stability, implicating defect suppression as the critical driver of improved performance. This work highlights DoE as a powerful methodology for uncovering latent structure–processing–property relationships in thin films and provides a general framework for accelerating the development of optoelectronic‐grade materials via solution processing.
- 13 October 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (43) , 15487-15494
Evanescent Mode Photoemission
Photoemission of electrons from solid surfaces into vacuum is routinely used in two configurations: reflection mode, in which light is incident on the emitting surface, and transmission mode, in which light illuminates the photoemissive material from behind. Here, using silicon nitride waveguides integrated beneath a high quantum efficiency cesium antimonide thin film, we demonstrate a new photoemission regime─the evanescent mode photoemission─in which light travels parallel to the surface in the waveguide while evanescently coupling into the thin film to excite and emit photoelectrons. Our experiments show that this configuration enables direct visualization of guided optical modes over an unprecedented range (∼100 nm to 1 mm) and allows electron beam shaping at the source with transverse features well below ∼600 nm, establishing evanescent mode photoemission as a new platform for nanoscale optical field mapping and precise generation of electron beams.
- 13 October 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (43) , 15487-15494
Evanescent Mode Photoemission
Photoemission of electrons from solid surfaces into vacuum is routinely used in two configurations: reflection mode, in which light is incident on the emitting surface, and transmission mode, in which light illuminates the photoemissive material from behind. Here, using silicon nitride waveguides integrated beneath a high quantum efficiency cesium antimonide thin film, we demonstrate a new photoemission regime─the evanescent mode photoemission─in which light travels parallel to the surface in the waveguide while evanescently coupling into the thin film to excite and emit photoelectrons. Our experiments show that this configuration enables direct visualization of guided optical modes over an unprecedented range (∼100 nm to 1 mm) and allows electron beam shaping at the source with transverse features well below ∼600 nm, establishing evanescent mode photoemission as a new platform for nanoscale optical field mapping and precise generation of electron beams.
- 26 September 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (6)
Textured growth and electrical characterization of zinc sulfide on back-end-of-the-line compatible substrates
Scaling of transistors has enabled continuous improvement in the performance of logic devices, especially with contributions from materials engineering. However, there is a need to surpass the horizontal limitations in chip manufacturing and incorporate the vertical or third dimension. To enable monolithic three-dimensional integration of high-performance logic, one needs to solve the fundamental challenge of low temperature (<450 °C) synthesis of high mobility n-type and p-type semiconductor thin films that can be utilized for the fabrication of back-end-of-line (BEOL) compatible transistors. Metal oxides, especially indium oxides alloyed with gallium and tungsten, are promising n-type semiconductor channel materials; however there is a lack of p-type channel materials that can meet the stringent synthesis conditions of BEOL manufacturing. Zinc sulfide (ZnS), a transparent wide bandgap semiconductor, has shown room temperature p-type conductivity when doped with copper and nitrogen, and crystallizes below 400 °C. Here, we report growth of crystalline thin films of ZnS by pulsed laser deposition on a variety of amorphous and polycrystalline surfaces, including silicon nitride (SiNx), thermal silicon dioxide (SiO2), yttrium oxide (Y2O3), hafnium dioxide (HfO2), sapphire (Al2O3), platinum (Pt), and titanium nitride (TiN). X-ray diffraction scans show out-of-the-plane texturing of ZnS on all surfaces. In-plane crystalline quality is investigated using grazing incidence wide-angle x-ray scattering measurements. Surface and interface quality is measured using x-ray reflectivity and atomic force microscopy measurements. Electrical characterization of the ZnS films is done by J-V measurements of ZnS on platinum and metal-oxide-semiconductor capacitor (MOSCAP) measurements of ZnS on SiO2 on heavily doped silicon. The J-V measurements indicate low leakage current on the order of 10−5 A/cm−2 with an electric field of 0.40 MV cm−1, and the MOSCAP characteristics show bilayer capacitor behavior, which points to ZnS being highly intrinsic with very low unintentional, electrically active point defects. Further work on doping ZnS with copper or other p-type candidate dopants is needed to demonstrate ZnS as a dopable wide bandgap semiconductor for channels compatible with BEOL manufacturing. This work showcases the capability of the novel thin film growth technique of a wide bandgap sulfide semiconductor under BEOL compatible conditions with potential for technological applications in transistor manufacturing.
- 26 September 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (6)
Textured growth and electrical characterization of zinc sulfide on back-end-of-the-line compatible substrates
Scaling of transistors has enabled continuous improvement in the performance of logic devices, especially with contributions from materials engineering. However, there is a need to surpass the horizontal limitations in chip manufacturing and incorporate the vertical or third dimension. To enable monolithic three-dimensional integration of high-performance logic, one needs to solve the fundamental challenge of low temperature (<450 °C) synthesis of high mobility n-type and p-type semiconductor thin films that can be utilized for the fabrication of back-end-of-line (BEOL) compatible transistors. Metal oxides, especially indium oxides alloyed with gallium and tungsten, are promising n-type semiconductor channel materials; however there is a lack of p-type channel materials that can meet the stringent synthesis conditions of BEOL manufacturing. Zinc sulfide (ZnS), a transparent wide bandgap semiconductor, has shown room temperature p-type conductivity when doped with copper and nitrogen, and crystallizes below 400 °C. Here, we report growth of crystalline thin films of ZnS by pulsed laser deposition on a variety of amorphous and polycrystalline surfaces, including silicon nitride (SiNx), thermal silicon dioxide (SiO2), yttrium oxide (Y2O3), hafnium dioxide (HfO2), sapphire (Al2O3), platinum (Pt), and titanium nitride (TiN). X-ray diffraction scans show out-of-the-plane texturing of ZnS on all surfaces. In-plane crystalline quality is investigated using grazing incidence wide-angle x-ray scattering measurements. Surface and interface quality is measured using x-ray reflectivity and atomic force microscopy measurements. Electrical characterization of the ZnS films is done by J-V measurements of ZnS on platinum and metal-oxide-semiconductor capacitor (MOSCAP) measurements of ZnS on SiO2 on heavily doped silicon. The J-V measurements indicate low leakage current on the order of 10−5 A/cm−2 with an electric field of 0.40 MV cm−1, and the MOSCAP characteristics show bilayer capacitor behavior, which points to ZnS being highly intrinsic with very low unintentional, electrically active point defects. Further work on doping ZnS with copper or other p-type candidate dopants is needed to demonstrate ZnS as a dopable wide bandgap semiconductor for channels compatible with BEOL manufacturing. This work showcases the capability of the novel thin film growth technique of a wide bandgap sulfide semiconductor under BEOL compatible conditions with potential for technological applications in transistor manufacturing.
- 6 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (11) , 17445-17453
Hot Electron Photoemission from Tunable Electron Affinity Semiconductor Cathodes
A voltage-tunable negative electron affinity (NEA) semiconductor photocathode offers one key advantage over current materials such as cesiated NEA photocathodes: stability under ambient conditions. A semiconductor/insulator/graphene heterostructure can inject electrons into the conduction band of the insulator, where an electric field "heats" them up so that the effective emission barrier seen by the "hot" electrons is negative, enabling a voltage-tunable NEA surface. Here, we have experimentally demonstrated a peak emission current density of 2.253 × 10-3 A/cm2 and a peak external quantum efficiency (EQE) of ∼1.53% from a p-Si/amorphous-Al2O3/graphene-based hot electron laser-assisted cathode (HELAC). We have developed a full-band Monte Carlo Boltzmann Transport Equation (MCBTE) solver to study the hot electron transport behavior in three different crystalline insulators: SiO2, Al2O3, and MgO. Through MCBTE and semiconductor device simulations, we have predicted a peak emission current density of ∼103 A/cm2, far above our experimental value, indicating that the optimal performance of state-of-the-art HELACs has not yet been realized. This theoretical framework provides an understanding of the key performance limitations of the device and can be used to guide the optimal design (e.g., through the selection of new materials) of voltage-tunable NEA semiconductor photocathodes.
- 6 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (11) , 17445-17453
Hot Electron Photoemission from Tunable Electron Affinity Semiconductor Cathodes
A voltage-tunable negative electron affinity (NEA) semiconductor photocathode offers one key advantage over current materials such as cesiated NEA photocathodes: stability under ambient conditions. A semiconductor/insulator/graphene heterostructure can inject electrons into the conduction band of the insulator, where an electric field "heats" them up so that the effective emission barrier seen by the "hot" electrons is negative, enabling a voltage-tunable NEA surface. Here, we have experimentally demonstrated a peak emission current density of 2.253 × 10-3 A/cm2 and a peak external quantum efficiency (EQE) of ∼1.53% from a p-Si/amorphous-Al2O3/graphene-based hot electron laser-assisted cathode (HELAC). We have developed a full-band Monte Carlo Boltzmann Transport Equation (MCBTE) solver to study the hot electron transport behavior in three different crystalline insulators: SiO2, Al2O3, and MgO. Through MCBTE and semiconductor device simulations, we have predicted a peak emission current density of ∼103 A/cm2, far above our experimental value, indicating that the optimal performance of state-of-the-art HELACs has not yet been realized. This theoretical framework provides an understanding of the key performance limitations of the device and can be used to guide the optimal design (e.g., through the selection of new materials) of voltage-tunable NEA semiconductor photocathodes.
- 3 September 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (36) , 9226-9232
Photoinduced Negative Differential Resistance at a Graphene/Silicon Interface: A Nonadiabatic Quantum Molecular Dynamics Study
The oscillatory retinal neuron (ORN) is a promising technology for achieving in-sensor cognitive image computing without external power. While its operation is based on photoinduced negative differential resistance (NDR) at a graphene/silicon interface to directly convert the incident optical signal into voltage oscillations, the optoelectronic mechanism of the NDR remains elusive. Here, nonadiabatic quantum molecular dynamics simulations show that the interplay of band alignment and charge transfer rates of photoexcited carriers at varying applied voltages gives rise to NDR at a graphene/silicon interface under illumination. Such intrinsic NDR at an interface, along with extrinsic circuit-level factors, could enable the much needed rational design of desired image computing functionality of ORN devices in the era of ubiquitous AI on edge devices.
- 3 September 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (36) , 9226-9232
Photoinduced Negative Differential Resistance at a Graphene/Silicon Interface: A Nonadiabatic Quantum Molecular Dynamics Study
The oscillatory retinal neuron (ORN) is a promising technology for achieving in-sensor cognitive image computing without external power. While its operation is based on photoinduced negative differential resistance (NDR) at a graphene/silicon interface to directly convert the incident optical signal into voltage oscillations, the optoelectronic mechanism of the NDR remains elusive. Here, nonadiabatic quantum molecular dynamics simulations show that the interplay of band alignment and charge transfer rates of photoexcited carriers at varying applied voltages gives rise to NDR at a graphene/silicon interface under illumination. Such intrinsic NDR at an interface, along with extrinsic circuit-level factors, could enable the much needed rational design of desired image computing functionality of ORN devices in the era of ubiquitous AI on edge devices.
- 14 August 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (34) , 23785-23796
Ultralow Power In-Sensor Neuronal Computing with Oscillatory Retinal Neurons for Frequency-Multiplexed, Parallel Machine Vision
In-sensor and near-sensor computing architectures enable multiply accumulate operations to be carried out directly at the point of sensing. In-sensor architectures offer dramatic power and speed improvements over traditional von Neumann architectures by eliminating multiple analog-to-digital conversions, data storage, and data movement operations. Current in-sensor processing approaches rely on tunable sensors or additional weighting elements to perform linear functions such as multiply accumulate operations as the sensor acquires data. This work implements in-sensor computing with an oscillatory retinal neuron device that converts incident optical signals into voltage oscillations. A computing scheme is introduced based on the frequency shift of coupled oscillators that enables parallel, frequency multiplexed, nonlinear operations on the inputs. An experimentally implemented 3 x 3 focal plane array of coupled neurons shows that functions approximating edge detection, thresholding, and segmentation occur in parallel. An example of inference on handwritten digits from the MNIST database is also experimentally demonstrated with a 3 x 3 array of coupled neurons feeding into a single hidden layer neural network, approximating a liquid-state machine. Finally, the equivalent energy consumption to carry out image processing operations, including peripherals such as the Fourier transform circuits, is projected to be <20 fJ/OP, possibly reaching as low as 15 aJ/OP.
- 14 August 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (34) , 23785-23796
Ultralow Power In-Sensor Neuronal Computing with Oscillatory Retinal Neurons for Frequency-Multiplexed, Parallel Machine Vision
In-sensor and near-sensor computing architectures enable multiply accumulate operations to be carried out directly at the point of sensing. In-sensor architectures offer dramatic power and speed improvements over traditional von Neumann architectures by eliminating multiple analog-to-digital conversions, data storage, and data movement operations. Current in-sensor processing approaches rely on tunable sensors or additional weighting elements to perform linear functions such as multiply accumulate operations as the sensor acquires data. This work implements in-sensor computing with an oscillatory retinal neuron device that converts incident optical signals into voltage oscillations. A computing scheme is introduced based on the frequency shift of coupled oscillators that enables parallel, frequency multiplexed, nonlinear operations on the inputs. An experimentally implemented 3 x 3 focal plane array of coupled neurons shows that functions approximating edge detection, thresholding, and segmentation occur in parallel. An example of inference on handwritten digits from the MNIST database is also experimentally demonstrated with a 3 x 3 array of coupled neurons feeding into a single hidden layer neural network, approximating a liquid-state machine. Finally, the equivalent energy consumption to carry out image processing operations, including peripherals such as the Fourier transform circuits, is projected to be <20 fJ/OP, possibly reaching as low as 15 aJ/OP.
- 28 May 2024
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 24 (11) , 4466-4472
Monolithic Growth of Patternable III–V on LiNbO3
- 28 May 2024
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 24 (11) , 4466-4472
Monolithic Growth of Patternable III–V on LiNbO3
- Open Access
- 9 April 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (16) , 18062-18071
Ultralow Power Electronic Analog of a Biological Fitzhugh–Nagumo Neuron
Here, we introduce an electronic circuit that mimics the functionality of a biological spiking neuron following the Fitzhugh-Nagumo (FN) model. The circuit consists of a tunnel diode that exhibits negative differential resistance (NDR) and an active inductive element implemented by a single MOSFET. The FN neuron converts a DC voltage excitation into voltage spikes analogous to biological action potentials. We predict an energy cost of 2 aJ/cycle through detailed simulation and modeling for these FN neurons. Such an FN neuron is CMOS compatible and enables ultralow power oscillatory and spiking neural network hardware. We demonstrate that FN neurons can be used for oscillator-based computing in a coupled oscillator network to form an oscillator Ising machine (OIM) that can solve computationally hard NP-complete max-cut problems while showing robustness toward process variations.
- 9 April 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (16) , 18062-18071
Open AccessUltralow Power Electronic Analog of a Biological Fitzhugh–Nagumo Neuron
Here, we introduce an electronic circuit that mimics the functionality of a biological spiking neuron following the Fitzhugh-Nagumo (FN) model. The circuit consists of a tunnel diode that exhibits negative differential resistance (NDR) and an active inductive element implemented by a single MOSFET. The FN neuron converts a DC voltage excitation into voltage spikes analogous to biological action potentials. We predict an energy cost of 2 aJ/cycle through detailed simulation and modeling for these FN neurons. Such an FN neuron is CMOS compatible and enables ultralow power oscillatory and spiking neural network hardware. We demonstrate that FN neurons can be used for oscillator-based computing in a coupled oscillator network to form an oscillator Ising machine (OIM) that can solve computationally hard NP-complete max-cut problems while showing robustness toward process variations.