Deize Dias Lopes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Deize Dias Lopes has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Ana Cláudia Barana
Universidade Estadual de Ponta Grossa image/svg+xml
4 shared publications - Kátia Valéria Marques Cardoso Prates
Universidade Tecnológica Federal do Paraná
4 shared publications - Camila Zoe Correa
Department of Civil Construction, State University of Londrina, Londrina, Brazil
3 shared publications - Márcia Helena Rissato Zamariolli Damianovic
Biological Processes Laboratory (LPB), São Carlos School of Engineering (EESC), University of São Paulo (USP), Av. João Dagnone, 1100, Santa Angelina, São Carlos, São Paulo 13563-120, Brazil
3 shared publications Simone D. Gomes
3 shared publicationsAna Cláudia Barana
State University of Ponta Grossa
2 shared publications
Latest Publications
- Open Access
- 9 March 2026
- Published by Elsevier in Journal of Environmental Management
- Vol. 403, 129277
Chelating agents EDTA and oxalic acid for enhanced Fenton treatment of landfill leachate at neutral pH
- 9 March 2026
- Published by Elsevier in Journal of Environmental Management
- Vol. 403, 129277
Open AccessChelating agents EDTA and oxalic acid for enhanced Fenton treatment of landfill leachate at neutral pH
- Open Access
- 21 May 2025
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 47 (esp. 2) , e91578
Avaliação da atividade bacteriana em um reator de leito estruturado sob diferentes taxas de carga orgânica (OLR)
O objetivo desta pesquisa foi avaliar a resposta da atividade bacteriana em reator de leito estruturado, de fluxo contínuo e ascendente na remoção de matéria orgânica e nitrogênio de águas residuárias de laticínios (concentração bruta de 5.326 mg.L-1 de DQO e 39 mg.L-1 de N-NH4+) sob diferentes cargas orgânicas volumétricas (COV). Utilizou-se um reator construído em acrílico em escala de bancada com volume total de 2,27 L e útil de 1,32 L, sendo operado por 271 dias. O reator foi operado com três fases experimentais, com diferentes COV: Fase I - 1,2 kgDQO.m-3.d-1 (107 dias); Fase II - 1,4 kgDQO.m-3.d-1 (94 dias) e Fase III - 1,8 kgDQO.m-3.d-1 (70 dias). Durante a operação obteve-se remoções de DQOT acima de 90% em todas as Fases. Já em relação a remoção de nitrogênio, os melhores resultados foram obtidos na Fase I, com remoção média de NTK e NT de 81 e 74%, respectivamente. O aumento da COV influenciou a remoção de nitrogênio por interferir diretamente no processo de amonificação. As concentrações das Bactérias Oxidantes de Amônia (BOA) e Bactérias Oxidadoras de Nitrito (BON) sofreram redução com o aumento da COV. Entretanto, mesmo com esse resultado, não houve acúmulo de formas oxidadas de nitrogênio, indicando que a nitrificação e a desnitrificação ocorreram simultaneamente. O reator de leito estruturado, operado com recirculação e aeração intermitente, mostrou-se eficaz na remoção simultânea de matéria orgânica e nitrogênio, criando um ambiente estável e favorável para processos combinados sob diferentes COVs.
- 21 May 2025
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 47 (esp. 2) , e91578
Open AccessAvaliação da atividade bacteriana em um reator de leito estruturado sob diferentes taxas de carga orgânica (OLR)
O objetivo desta pesquisa foi avaliar a resposta da atividade bacteriana em reator de leito estruturado, de fluxo contínuo e ascendente na remoção de matéria orgânica e nitrogênio de águas residuárias de laticínios (concentração bruta de 5.326 mg.L-1 de DQO e 39 mg.L-1 de N-NH4+) sob diferentes cargas orgânicas volumétricas (COV). Utilizou-se um reator construído em acrílico em escala de bancada com volume total de 2,27 L e útil de 1,32 L, sendo operado por 271 dias. O reator foi operado com três fases experimentais, com diferentes COV: Fase I - 1,2 kgDQO.m-3.d-1 (107 dias); Fase II - 1,4 kgDQO.m-3.d-1 (94 dias) e Fase III - 1,8 kgDQO.m-3.d-1 (70 dias). Durante a operação obteve-se remoções de DQOT acima de 90% em todas as Fases. Já em relação a remoção de nitrogênio, os melhores resultados foram obtidos na Fase I, com remoção média de NTK e NT de 81 e 74%, respectivamente. O aumento da COV influenciou a remoção de nitrogênio por interferir diretamente no processo de amonificação. As concentrações das Bactérias Oxidantes de Amônia (BOA) e Bactérias Oxidadoras de Nitrito (BON) sofreram redução com o aumento da COV. Entretanto, mesmo com esse resultado, não houve acúmulo de formas oxidadas de nitrogênio, indicando que a nitrificação e a desnitrificação ocorreram simultaneamente. O reator de leito estruturado, operado com recirculação e aeração intermitente, mostrou-se eficaz na remoção simultânea de matéria orgânica e nitrogênio, criando um ambiente estável e favorável para processos combinados sob diferentes COVs.
- 5 April 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (2) , 1793-1800
Structured-bed reactor with intermittent aeration and recirculation (SBRRIA) for treating UASB effluent combined with raw sewage
- 5 April 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (2) , 1793-1800
Structured-bed reactor with intermittent aeration and recirculation (SBRRIA) for treating UASB effluent combined with raw sewage
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Biogas Generation in Hypothetical Full-Scale Ansbbr Reactor from Cassava Starch Wastewater: Energy Production and Savings Estimate
A two-phase acidogenic-methanogenic system is a wastewater treatment solution that can improve biogas generation as it allows separately optimal conditions for each phase of the anaerobic digestion. The implementation of this solution in industries depends on technical and economic issues such as system adaptation to a continuous mode and costs savings by energy recycling from the biogas produced. The aim of this study was to estimate the energy production and savings provided by a hypothetical full scale anaerobic sequencing batch biofilm reactor regarding biogas production from cassava starch wastewater. The treatment system dimensioned is composed of two 409.1 m 3 acidogenic reactors (cycle time of 4 h) in parallel, followed by four 409.1 m 3 methanogenic reactors (cycle time of 8 h), also in parallel. This system could produce up to 300 kWh, which represents 7,200 kWh d -1 or 187,200 kWh month -1 considering the industry operation (around 35.7% of energy savings). The results point to a technical feasibility of this application, but future studies must assess its economic feasibility, considering capital and maintenance expenses as well as the incomes provided by the energy savings.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessBiogas Generation in Hypothetical Full-Scale Ansbbr Reactor from Cassava Starch Wastewater: Energy Production and Savings Estimate
A two-phase acidogenic-methanogenic system is a wastewater treatment solution that can improve biogas generation as it allows separately optimal conditions for each phase of the anaerobic digestion. The implementation of this solution in industries depends on technical and economic issues such as system adaptation to a continuous mode and costs savings by energy recycling from the biogas produced. The aim of this study was to estimate the energy production and savings provided by a hypothetical full scale anaerobic sequencing batch biofilm reactor regarding biogas production from cassava starch wastewater. The treatment system dimensioned is composed of two 409.1 m 3 acidogenic reactors (cycle time of 4 h) in parallel, followed by four 409.1 m 3 methanogenic reactors (cycle time of 8 h), also in parallel. This system could produce up to 300 kWh, which represents 7,200 kWh d -1 or 187,200 kWh month -1 considering the industry operation (around 35.7% of energy savings). The results point to a technical feasibility of this application, but future studies must assess its economic feasibility, considering capital and maintenance expenses as well as the incomes provided by the energy savings.
- 11 February 2021
- Published by Taylor & Francis in Environmental Technology
- Vol. 43 (16) , 2443-2456
Aeration and non-aeration cycles (AE/NA) time: influence in combined organic matter and nitrogen removal and features of biofilm
This research aimed the performance evaluation of a structured bed reactor with different cycles of Intermittent Aeration (IA)(SBRRIA) in the municipal sewage treatment and the verification of the effect of IA cycles on the total nitrogen (TN) removal and organic matter (COD). Three IA cycles were evaluated: phase I (4 h AE (aeration on) – 2 h NA (aeration off)); II (2 h AE–1 h NA) and III (2 h AE–2 h NA), with Hydraulic Retention Time of 16 h. The best nitrogen removal was obtained during phase II, with the lowest non-aeration time: efficiency of nitrification, denitrification, TN and COD removal of 80 ± 15%, 82 ± 12%, 67 ± 6% and 94 ± 7%, respectively. The mean cell residence time was 19, 26 and 33 d in phases I, II and III, respectively. The statistical analysis applied to the AE/NA profiles showed that the time of AE and NA in the cycles did not influence nitrogen and organic matter removal. Thus, this indicates the recirculation and the gradient formed in the support material facilitate the process of Simultaneous Nitrification and Denitrification. The lowest concentration of nitrifying and denitrifying microorganisms was obtained in effluent and sludge at the end of phase III. From the TP (Total Proteins)/TPS (Total Polysaccharides) ratio obtained (0.8 ± 0.1, 1.3 ± 0.1 e 1.5 ± 0.1 in phases I, II and III), it was possible to conclude that the biofilm in phase I was more porous, with a thin layer if compared to that in phase II and III. GRAPHICAL ABSTRACT
- 11 February 2021
- Published by Taylor & Francis in Environmental Technology
- Vol. 43 (16) , 2443-2456
Aeration and non-aeration cycles (AE/NA) time: influence in combined organic matter and nitrogen removal and features of biofilm
This research aimed the performance evaluation of a structured bed reactor with different cycles of Intermittent Aeration (IA)(SBRRIA) in the municipal sewage treatment and the verification of the effect of IA cycles on the total nitrogen (TN) removal and organic matter (COD). Three IA cycles were evaluated: phase I (4 h AE (aeration on) – 2 h NA (aeration off)); II (2 h AE–1 h NA) and III (2 h AE–2 h NA), with Hydraulic Retention Time of 16 h. The best nitrogen removal was obtained during phase II, with the lowest non-aeration time: efficiency of nitrification, denitrification, TN and COD removal of 80 ± 15%, 82 ± 12%, 67 ± 6% and 94 ± 7%, respectively. The mean cell residence time was 19, 26 and 33 d in phases I, II and III, respectively. The statistical analysis applied to the AE/NA profiles showed that the time of AE and NA in the cycles did not influence nitrogen and organic matter removal. Thus, this indicates the recirculation and the gradient formed in the support material facilitate the process of Simultaneous Nitrification and Denitrification. The lowest concentration of nitrifying and denitrifying microorganisms was obtained in effluent and sludge at the end of phase III. From the TP (Total Proteins)/TPS (Total Polysaccharides) ratio obtained (0.8 ± 0.1, 1.3 ± 0.1 e 1.5 ± 0.1 in phases I, II and III), it was possible to conclude that the biofilm in phase I was more porous, with a thin layer if compared to that in phase II and III. GRAPHICAL ABSTRACT
- 1 February 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (8) , 5165-5174
Biohydrogen and biomethane production from cassava wastewater in a two-stage anaerobic sequencing batch biofilm reactor
- 1 February 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (8) , 5165-5174
Biohydrogen and biomethane production from cassava wastewater in a two-stage anaerobic sequencing batch biofilm reactor
- 19 August 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 191 (9) , 1-16
Monitoring of the process of waste landfill leachate diffusion in clay and sandy soil
The objective of this research was to evaluate the interaction of landfill leachate of urban solid waste in clayey (CL) and sandy soils (SL) in order to determine physical and chemical parameters that can be used as indicators of soil contamination when there are faults in the landfill waterproofing. In the diffusion tests, compacted soil samples were placed in contact with leachate (methanogenic phase). The temporal analysis (200 days) considered the parameters pH, electrical conductivity (EC), alkalinity, nitrogen series, chemical oxygen demand (COD), solids and color for the leachate and pH, ΔpH, EC, total nitrogen (TN), chemical elements, and cation exchange capacity (CEC) for the soils. Correlation analysis and principal component analysis (PCA) were performed to results. It was observed that the studied soils have potential to attenuate chemicals present in the leachate; this indicates the possibility of using them as base in landfills. Correlation analysis and PCA carried out to CL showed that in a process of CL monitoring the pH would be the key parameter to indicate contamination of this soil, due to the high correlation of this parameter with the others analyzed. For the SL, the parameters pH, alkalinity, apparent color, and COD (total and filtered) could be used as indicators of contamination. In both soils, monitoring of concentrations of Ca, Mg, K, SB, V, and CTC can be used to indicate possible faults in the waterproofing system of the landfill.
- 19 August 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 191 (9) , 1-16
Monitoring of the process of waste landfill leachate diffusion in clay and sandy soil
The objective of this research was to evaluate the interaction of landfill leachate of urban solid waste in clayey (CL) and sandy soils (SL) in order to determine physical and chemical parameters that can be used as indicators of soil contamination when there are faults in the landfill waterproofing. In the diffusion tests, compacted soil samples were placed in contact with leachate (methanogenic phase). The temporal analysis (200 days) considered the parameters pH, electrical conductivity (EC), alkalinity, nitrogen series, chemical oxygen demand (COD), solids and color for the leachate and pH, ΔpH, EC, total nitrogen (TN), chemical elements, and cation exchange capacity (CEC) for the soils. Correlation analysis and principal component analysis (PCA) were performed to results. It was observed that the studied soils have potential to attenuate chemicals present in the leachate; this indicates the possibility of using them as base in landfills. Correlation analysis and PCA carried out to CL showed that in a process of CL monitoring the pH would be the key parameter to indicate contamination of this soil, due to the high correlation of this parameter with the others analyzed. For the SL, the parameters pH, alkalinity, apparent color, and COD (total and filtered) could be used as indicators of contamination. In both soils, monitoring of concentrations of Ca, Mg, K, SB, V, and CTC can be used to indicate possible faults in the waterproofing system of the landfill.
- Open Access
- 13 March 2019
- Published by Frontiers Media SA in Frontiers in Sustainable Food Systems
- Vol. 3
Cassava Wastewater Treatment in Fixed-Bed Reactors: Organic Matter Removal and Biogas Production
The process of cassava starch extraction is associated with the generation of a large volume of liquid wastes from root washing and starch extraction (5 to 7 L.kg−1root). In this context, the aim of this study was to evaluate the treatment of cassava starch wastewater in a horizontal anaerobic fixed bed reactor to the removal of organic matter and generation of biogas. For this purpose, two fixed bed reactors filled with different types of support materials were used: bamboo rings (R1) and flexible PVC rings (R2). The reactors were constructed in polyvinyl chloride (PVC) with 90 cm length and 15 cm diameter. To evaluate the reactors were carried out 13 assays (A1 to A13) with increases in the organic loading rate (OLR, 1.7 to 15.0 g.L−1.d−1) and a decrease in the hydraulic retention time (HRT, 4.0 to 0.8 days). Biogas production followed a similar pattern in both reactors. The highest biogas productions of 1.4 L.L−1.d−1 (R1) and 1.0 L.L−1.d−1 (R2) were verified in the assay A6 in which were applied highest influent concentration (15.1g.L−1), intermediates OLR (5.6 g.L−1.d−1) and HRT (2.7 d). The chemical oxygen demand (COD) removal increased with the OLR increase resulting in COD removal values of up to 99%. Total solids removal efficiencies of 86.2 and 85.5% were achieved in R1 and R2, respectively. In both reactors, the contact surface of bamboo (132 m2.m−3) and PVC (191 m2.m−3) supported biomass attachment even in the highest OLR (15 g.L−1.d−1) and low HRT (0.8 d). Both support material provided conditions to the reactors resist the variations in operating conditions and reestablish the equilibrium after possible hydraulic and organic shocks load, constituting a robust system for the treatment of cassava starch wastewater. In these conditions the COD and solids removal remained satisfactory. After a 450-days reactor running, no changes were observed in the composition and structure of the support material, indicating that bamboo and PVC are possible cheap and efficient alternatives for biomass immobilization.
- 13 March 2019
- Published by Frontiers Media SA in Frontiers in Sustainable Food Systems
- Vol. 3
Open AccessCassava Wastewater Treatment in Fixed-Bed Reactors: Organic Matter Removal and Biogas Production
The process of cassava starch extraction is associated with the generation of a large volume of liquid wastes from root washing and starch extraction (5 to 7 L.kg−1root). In this context, the aim of this study was to evaluate the treatment of cassava starch wastewater in a horizontal anaerobic fixed bed reactor to the removal of organic matter and generation of biogas. For this purpose, two fixed bed reactors filled with different types of support materials were used: bamboo rings (R1) and flexible PVC rings (R2). The reactors were constructed in polyvinyl chloride (PVC) with 90 cm length and 15 cm diameter. To evaluate the reactors were carried out 13 assays (A1 to A13) with increases in the organic loading rate (OLR, 1.7 to 15.0 g.L−1.d−1) and a decrease in the hydraulic retention time (HRT, 4.0 to 0.8 days). Biogas production followed a similar pattern in both reactors. The highest biogas productions of 1.4 L.L−1.d−1 (R1) and 1.0 L.L−1.d−1 (R2) were verified in the assay A6 in which were applied highest influent concentration (15.1g.L−1), intermediates OLR (5.6 g.L−1.d−1) and HRT (2.7 d). The chemical oxygen demand (COD) removal increased with the OLR increase resulting in COD removal values of up to 99%. Total solids removal efficiencies of 86.2 and 85.5% were achieved in R1 and R2, respectively. In both reactors, the contact surface of bamboo (132 m2.m−3) and PVC (191 m2.m−3) supported biomass attachment even in the highest OLR (15 g.L−1.d−1) and low HRT (0.8 d). Both support material provided conditions to the reactors resist the variations in operating conditions and reestablish the equilibrium after possible hydraulic and organic shocks load, constituting a robust system for the treatment of cassava starch wastewater. In these conditions the COD and solids removal remained satisfactory. After a 450-days reactor running, no changes were observed in the composition and structure of the support material, indicating that bamboo and PVC are possible cheap and efficient alternatives for biomass immobilization.
- 1 January 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44 (3) , 1474-1482
Impact of operational conditions on development of the hydrogen-producing microbial consortium in an AnSBBR from cassava wastewater rich in lactic acid
- 1 January 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44 (3) , 1474-1482
Impact of operational conditions on development of the hydrogen-producing microbial consortium in an AnSBBR from cassava wastewater rich in lactic acid
- Open Access
- 31 October 2018
- Published by Instituto de Pesquisas Ambientais em Bacias Hidrograficas (IPABHi) in Ambiente e Agua - An Interdisciplinary Journal of Applied Science
- Vol. 13 (6) , 1-9
Analysis of toxicity from the effluent generated in a furniture industry spray booth using the species Lactuca sativa and Allium cepa
This study evaluated the toxicity of effluent generated in a furniture industry spray booth, before and after treatment in a system composed of an anaerobic sequencing batch (ASBR) followed by an aerobic sequencing batch reactor (SBR). The toxicity tests were carried out with raw (with and without dilutions) and treated effluent to evaluate the toxic potential using Allium cepa and Lactuca sativa as bioindicators. The toxicity tests, using Allium cepa and Lactuca sativa, indicated that the anaerobic-aerobic treatment performed was efficient to reduce the toxicity of the paint booth effluent. The raw effluent, undiluted and diluted (at 1:10; 1:8 and 1:6 dilutions), showed toxic effect on the root growth of Allium cepa, as it inhibited root growth by 100%. In the tests with Lactuca sativa seeds, there was partial inhibition, between 44% and 63%, for 1:10 and 1:8 dilutions, but for the 1: 6 dilution and without dilution of effluent the inhibition was 100%. The treated effluent, in an ASBR followed by an SBR, presented a small percentage of inhibition for tests with Allium cepa (13%) and Lactuca sativa seeds (4%). The effluent treated by the anaerobic system followed by aerobic presented low toxicity without generating lethal or sub-lethal effects to the test organisms, which indicates the efficiency of the treatment process.
- 31 October 2018
- Published by Instituto de Pesquisas Ambientais em Bacias Hidrograficas (IPABHi) in Ambiente e Agua - An Interdisciplinary Journal of Applied Science
- Vol. 13 (6) , 1-9
Open AccessAnalysis of toxicity from the effluent generated in a furniture industry spray booth using the species Lactuca sativa and Allium cepa
This study evaluated the toxicity of effluent generated in a furniture industry spray booth, before and after treatment in a system composed of an anaerobic sequencing batch (ASBR) followed by an aerobic sequencing batch reactor (SBR). The toxicity tests were carried out with raw (with and without dilutions) and treated effluent to evaluate the toxic potential using Allium cepa and Lactuca sativa as bioindicators. The toxicity tests, using Allium cepa and Lactuca sativa, indicated that the anaerobic-aerobic treatment performed was efficient to reduce the toxicity of the paint booth effluent. The raw effluent, undiluted and diluted (at 1:10; 1:8 and 1:6 dilutions), showed toxic effect on the root growth of Allium cepa, as it inhibited root growth by 100%. In the tests with Lactuca sativa seeds, there was partial inhibition, between 44% and 63%, for 1:10 and 1:8 dilutions, but for the 1: 6 dilution and without dilution of effluent the inhibition was 100%. The treated effluent, in an ASBR followed by an SBR, presented a small percentage of inhibition for tests with Allium cepa (13%) and Lactuca sativa seeds (4%). The effluent treated by the anaerobic system followed by aerobic presented low toxicity without generating lethal or sub-lethal effects to the test organisms, which indicates the efficiency of the treatment process.