ARAnatoliy S. Revko

Anatoliy S. Revko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anatoliy S. Revko has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and optimization of an adaptive recursive digital controller for the quadrotor roll-angle loop based on a SUGENO-0 fuzzy supervisor

    by Oleh Sereda, Anatolii Revko

    This paper addresses the synthesis and optimisation of an adaptive recursive digital controller for the roll-angle control loop of a quadcopter based on a Sugeno-0 fuzzy supervisor. The relevance of the study is determined by the growing need to improve the dynamic performance and energy efficiency of quadcopter flight-control systems equipped with brushless DC motors. In practical flight conditions, the external roll loop must provide fast and accurate response under variable manoeuvring regimes while remaining sufficiently simple for real-time embedded implementation. However, conventional controllers with fixed coefficients usually ensure acceptable control quality only within a limited operating range. An increase in response speed is commonly accompanied by larger overshoot, higher peak currents, and greater energy consumption. Therefore, the problem considered in the paper is the development of a control law capable of adapting its action intensity according to the current tracking conditions without excessive computational complexity. The aim of the study is to develop, mathematically substantiate, and numerically investigate an adaptive recursive digital controller for the roll-angle loop of a quadcopter in which the Sugeno-0 supervisor directly scales the controller parameters of the FIR numerator, and to compare this approach with previously implemented control solutions in terms of transient quality and energy consumption. The proposed controller combines a fixed IIR denominator obtained by deadbeat synthesis with an adaptive FIR numerator whose coefficients are updated online at each sampling instant by fuzzy inference. In contrast to approaches based on intermediate parameter adaptation followed by online controller resynthesis, the proposed structure directly modifies the recursive controller coefficients, which simplifies practical implementation. The research methods include the development of a physically grounded mathematical model of the BLDC motor and the one-axis roll platform of the quadcopter, continuous-to-discrete transformation of the plant equations, deadbeat synthesis of the denominator, pole assignment using the Ackermann approach, fuzzy supervision based on the normalized roll-angle error and its increment, and stability assessment by the frozen-coefficients method and the Jury criterion. The paper also provides physical justification of the Sugeno-0 rule tables and visualises the supervisor behaviour by means of output surfaces. The results of comparative simulation for four controllers in nine test scenarios show that the proposed adaptive recursive digital controller provides an improved compromise between response speed, overshoot limitation, and energy expenditure. The obtained results confirm that direct fuzzy adaptation of the FIR numerator coefficients makes it possible to improve roll-angle control quality while preserving computational simplicity. It is concluded that the proposed controller is a promising solution for embedded quadcopter flight-control systems operating under variable conditions.

  • Open Access

    Artificial intelligence models for quality control of toroid transformer windings

    by Vladyslav Parkhomets, Mykhailo Shevchenko-Hryshko, Anatolii Revko, Oleksiy Gorodniy, Владислав Пархомець, Олексій Городній

    The paper presents a review and comparative analysis of modern artificial intelligence models suitable for real-time quality control of toroidal transformer winding. It is shown that existing AI solutions for transformer diagnostics and electronic product quality control are mainly focused on post-production (offline) analysis and do not address the specifics of the winding process. More than 25 neural network architectures were evaluated according to model size (≤ 200 MB), accuracy, computational load, and relative efficiency metrics. The most promising models were identified: EfficientNetV2-S and YOLOv11l as primary options for classification and object detection respectively, and EfficientNetB0 with YOLOv8n as lightweight alternatives. A universal four-stage scheme for integrating AI into a winding quality control system is defined and analyzed. The obtained results provide a scientific basis for developing low-cost intelligent monitoring systems for toroidal transformer winding machines, suitable for laboratory, educational, and small-batch production.

  • Open Access

    Control of electrical parameters of multicopter drones

    by Anatolii Prystupa, Yevhenii Yatchenko, Anatolii Revko, Tetiana Kulko, Анатолій Приступа, Євгеній Ятченко

    Multicopter unmanned aerial vehicles (UAVs) are widely used in both civilian and military applications, including aerial photography, power line monitoring, cargo delivery, agriculture, and combat operations. The reliability and efficiency of their power supply systems are critical for safe operation. Battery failures during flight, such as unexpected discharge or overheating, can lead to emergency landings, loss of the vehicle, or even fire and explosion hazards. Standard battery management systems (BMS) used in commercial multicopters are limited to basic protection functions and do not provide accurate residual capacity estimation, remaining flight time prediction, or battery degradation tracking. A separate category includes UAVs operating without built-in BMS, which is typical for FPV drones and tactical unmanned systems where weight minimization and prevention of sudden power cutoff are critical factors. Therefore, the development of an effective power supply parameter monitoring system is a relevant scientific and technical task. Existing monitoring solutions are typically limited to measuring the total battery current and voltage, without providing per-channel analysis of individual motor power circuits. This approach does not allow early detection of anomalies in individual drive systems, load imbalance between motors, or degradation of specific power circuit components. The problem is particularly acute for UAVs operating under extreme conditions: low or high ambient temperatures, significant load fluctuations, and batteries with varying degrees of wear. The research objective is to develop and substantiate the hardware architecture of a power circuit parameter monitoring system for a multicopter drone that provides current and voltage measurement in individual motor channels with integration into the existing control system based on the NVIDIA Jetson Nano single-board computer and the Pixhawk 6C flight controller. Achieving this objective will enable early detection of anomalies in individual power circuits, improve flight safety, and extend battery service life through informed energy management. A modular monitoring system architecture consisting of two main subsystems has been proposed: a power circuit parameter measurement subsystem and a data acquisition and processing subsystem. ACS758 Hall effect current sensors have been selected for motor current measurement, providing galvanic isolation, no power losses in the power circuit, and a measurement range of up to 50 A. For precision voltage measurement, INA226 integrated circuits with 16-bit ADC resolution and ±0.1% accuracy have been chosen, supporting up to 16 devices on a single I2C bus. An I2C bus organization scheme with unique addressing of five devices (four INA226 modules and an ADS1115 ADC) has been developed, enabling per-channel monitoring of four motor power circuits. Integration with the Pixhawk 6C flight controller is provided via the MAVLink protocol through a USB-UART interface with an HW-597 logic level converter. A comparative analysis of the selected components against alternative solutions has been performed, and system limitations including I2C bus constraints, measurement channel errors, electromagnetic interference effects, and scalability considerations have been discussed. The developed hardware architecture represents a novel approach to per-channel power monitoring in multicopter UAVs, addressing the gap between basic BMS functionality and the requirements of advanced diagnostics. The proposed system provides current and voltage measurement in each motor channel, enabling determination of instantaneous power consumption and load balance monitoring between motors. Unlike typical solutions limited to total battery current measurement, per-channel monitoring creates prerequisites for early detection of anomalies in individual drone components. The practical significance lies in the ability to detect motor or ESC degradation at an early stage, prevent in-flight failures, and optimize battery usage patterns — directly fulfilling the stated research objective of improving flight safety and extending battery life. Future research directions include the development of algorithmic support for estimating state of charge (SoC) and state of health (SoH) of the battery based on per-channel monitoring data, as well as experimental studies of the proposed system accuracy and reliability under real flight conditions.

  • Open Access

    Research on methods of modification of winding machine for toroid transformers

    by Mykhailo Shevchenko-Hryshko, Vladyslav Parkhomets, Anatoliy Revko, Oleksiy Gorodniy

    In the paper, the design of a winding machine for toroidal cores, developed to reduce the cost and improve the ergonomics of the machine in the process of its operation is considered. The main shortcomings of analogues are analyzed. Modifications are proposed, including the use of modern production methods to reduce the cost of the winding machine while maintaining quality performance, automation of the winding process and the introduction of a sensor system to control the quality parameters of transformer winding. Special attention is paid to the prospects for the application of machine learning algorithms to improve the quality of winding. The proposed solutions contribute to the creation of an effective and inexpensive winding machine, compared to analogues, for laboratory, educational and small-scale use.

  • Open Access

    ENERGY SUPPLY SYSTEM FOR THE HYDROMETEOROLOGICAL OBSERVATION STATION

    by Anatoliy Prystupa, Chernihiv Polytechnic National University, Anatoliy Revko, Victoria Margasova, Kateryna Novyk, Анатолій Приступа, Катерина Новик

    There are more and more tasks that require constant monitoring of certain parameters today. In particular, this concerns monitoring of environmental parameters, control over the state of water bodies, radiation monitoring, as well as solving secu-rity tasks of automated surveillance of a certain territory. The development of modern technologies makes it possible to use a variety of measuring equipment, video surveillance and communication equipment, and intelligent data processing and storage devices at monitoring stations. The efficiency of a monitoring station depends to a large extent on the reliability of the station's power supply system. Therefore, improving approaches to the design of the station’s power supply system is an urgent task.The issues of automated monitoring of hydrological, meteorological and environmental parameters have recently re-ceived increasing attention from both domestic and foreign scientists [1-13]. The development of renewable energy sources and semiconductor converters for its distribution among consumers within the monitoring station allows such stations to be mobile [2, 4, 6] or located in hard-to-reach places [3; 5; 8].This paper presents the results of the authors' theoretical and experimental research into the peculiarities of creating a power supply system for the station, obtained in the course of the research project “THEOREMS-Dnipro. Transboundary HydrometEORological and Environmental Monitoring System of Dnipro river”, “Applied development of an organisational and economic mechanism for ensuring the environmental safety of water resources through automated monitoring”, “Multi-agent system for the protection of critical infrastructure based on a swarm of multi-copter drones”.There is a large number of publications related to improving the accuracy of measuring equipment of observation stations [14-15], improving processing algorithms [16-17] and information transmission [18-20]. However, insufficient attention is paid to power supply systems.However, the accuracy and reliability of the measured information and the reliability of the observation station will largely depend on the quality of the power supply for the station's equipment. In light of recent events related to the military aggression of the Russian Federation, hydrometeorological observation stations can be supplemented with video surveillance systems and become an important element in the system of ensuring the protection of certain territories. They can become even more functional if they are used as recharging stations for various types of drones. Such an expansion of the stations' function-ality is not possible without a high-quality power supply system.The purpose of the study is to analyse typical structural schemes of hydrometeorological observation stations, to inves-tigate the operating modes of station equipment and their impact on the power supply system.According to the type of power supply, hydrometeorological observation stations can be divided into three categories:Stations with mains power supply is usually used for stationary devices that consume significant power.Stations with autonomous power supply are usually powered by rechargeable batteries that are recharged from renew-able energy sources.The use of self-powered structures allows such stations to be mobile.Combined power supply provides for the possibility of power supply both from batteries and from the stationary AC power grid. When operating surveillance stations with autonomous or combined power supply, it is advisable to provide for the possibility of controlling the power supply of individual consumers within the station in order to change the frequency of measurements depending on the energy reserves in the batteries.To control the output channels in the power supply system, it is necessary to provide a control module and an extensive monitoring system for both electrical parameters (currents, voltages, capacitance, resistance) and non-electrical parameters (temperature, relative humidity, light intensity, etc.).For stand-alone and combined monitoring stations, the reliability and efficiency of the station will be largely determined by the reliable operation of the battery and the correct choice of its nominal parameters.The charge-discharge modes of the battery are considered and the choice of its nominal capacity is substantiated.The article presents an overview of the main structural schemes of hydrometeorological observation stations. The pecu-liarities of using each structural scheme are considered. The necessity of implementing a system for monitoring the electrical and non-electrical parameters of the power supply unit of an autonomous and combined observation station is substantiated. The calculation of changes in the energy of the battery is presented, on the basis of which it is possible to select the nominal capacity of the battery required for reliable and uninterrupted operation of the station. У роботі представлені результати теоретичних та експериментальних досліджень авторів у вивченні особливо-стей створення системи енергозабезпечення станції, отриманих при виконанні НДР “THEOREMS-Dnipro. Transboundary HydrometEORological and Environmental Monitoring System of Dnipro river”, “Прикладна розробка органі-заційно-економічного механізму забезпечення екологічної безпеки водних ресурсів шляхом автоматизованого монітори-нгу”, “Мультиагентна система захисту об’єктів критичної інфраструктури на основі рою мультикоптерних дронів”.На сьогоднішній день велика...

  • Лінійний електропривід для позиціонування робочого органу механізмів бортової авіаційної техніки

    by В.г. Башинський, Ю.о. Денисов, А.с. Ревко, О.о. Бурсала

    Для управління позиціонуванням робочого органу, який виконує поступальний рух в процесі відпрацювання відповідних команд бортового комп’ютера літального апарату, запропоновано триконтурну систему з контролем споживаного струму, швидкості руху і заданого положення. На основі модульного оптимуму знайдено умови забезпечення мінімальної похибки позиціонування в перехідному і усталеному режимах.

  • Open Access

    Компенсація пульсацій напруги та струму в системах електроприводів гвинтів квадрокоптеру

    by Ю.о. Денисов, А.с. Ревко, О.о. Бурсала

    A method is proposed for compensating for pulse current, supply voltage, and counter-emf. a direct-current DC motor, which eliminated their influence on the dynamic and energy performance of copter propeller electric drive systems. Compensation of pulse current is achieved by ensuring the equality of the derivatives of the supply voltage and the nasty-emf. BLDC. To this end, it is proposed to include in the current loop of the copter propeller propellers the circuit for calculating the difference of the derivatives of the above parameters. This difference is fed to the input of the current circuit and has a stabilizing effect on the process of electric motor current formation. Based on the analysis of discrete processes in the current loop, a ripple compensation condition is obtained, which consists in fitting the product of the transfer function module of the direct link of the current loop and its feedback circuit to unity. The necessary calculations are performed that confirm the correctness of the proposed compensation conditions. It is shown that the inclusion of pulse compensation circuits in the current circuit can cause a loss of its stability at subharmonic frequencies. The presence of phase asymmetry between the control signals of the transistors of an autonomous voltage inverter, BLDC, the scatter of the parameters of the control channels and the motor windings in the presence of additional feedback circuits of the current loop increases the likelihood of loss of stability at subharmonic frequencies. Taking into account the discreteness of the processes occurring in the current loop of the copter propeller electric drive system, its transfer function is obtained for the moment of operation of the pulse element, taking into account the circuits that compensate the ripple of the counter-emf. BLDC, which made it possible to obtain its characteristic equation. Based on the analysis of the characteristic equation of the current loop, taking into account the influence of compensation circuits on the process in it, the stability condition on the main subharmonic is obtained. This condition connects the parameters of the current loop controller and the parameters of the pulse compensation circuit. Запропоновано засіб компенсації пульсацій струму, напруги живлення та проти-е.р.с. безколекторного двигуна постійного струму для систем електроприводів гвинтів квадрокоптеру. Отримано умову компенсації пульсацій за результатами контролю їх похідних, що призводить до зниження втрат потужності в електродвигуні та підвищує час використання енергетичного ресурсу акумулятора. Знайдено умови субгармонійної стійкості контуру струму системи електроприводу з ланцюгами компенсації пульсацій.

  • METHODS OF AUTOMATIC DETERMINATION OF THE POSITION OF A MOVING PLATFORM IN SPACE

    by Chernihiv National University of Technology, Illia Fіlіmonov, Anatoly Revko, Игорь Юрьевич Лысенко, Founder Of The Company Incomvision, Илья Юрьевич Филимонов

    Urgency of the research. The existence of the need to improve the accuracy of research areas, including in hard-toreach areas, updates the direction of finding new ways of automatic localization for the task of the robot about collecting the information surrounding it for its own localization and building the environment map. Target setting. Existing methods for determining the location of a moving platform in space have a significant error, which is unacceptable for use in devices designed to operate without human intervention. Actual scientific researches and issues analysis. Research trends show satisfactory results of the introduction of new algorithms based on neural networks, but most of the solutions are designed for large moving platforms, while for small platforms, such as UAVs, solutions are not enough. Uninvestigated parts of general matters defining. Works on the automatic determination of the location of a moving platform often demonstrate the results of experiments that were performed in laboratory conditions. The question arises: how the system will behave when tested in real conditions? The research objective. It is supposed to implement a system of automatic movement of the platform based on modern hardware and localization algorithms. The statement of basic materials. Considered general information for methods of localization and mapping of SLAM, the general algorithm for the operation of methods of SLAM and their mathematical representation are presented. Sensors, that are used in localization tasks, are described and two main SLAM methods with a detailed description are presented. The results of the simulation of the ORB-SLAM2 method were presented. Conclusions. The methods for localizing a moving platform in space and algorithm for the operation of the SLAM methods were reviewed in this paper. The features of SLAM methods and their development prospects are presented.

  • Control Rapidity Optimization Technique of DC-Motor Driven by Quasi-Resonant Converter Using Pontryagin's Maximum Principle

    by Anatoliy S. Revko, Roman D. Yershov

    The control optimization technique by the rapidity criterion, based on the maximum principle proposed by L.S. Pontryagin, was applied to the differential equations system, which is describes the DC-motor in time domain, and is constructed based on its dynamic model. A quasi-resonant pulsed converter keeps the DC-motor armature voltage stable. An optimal duration of each pulse in control sequence was calculated. Proposed approach allows calculating both the precision motions and rotations of DC-motor, and at the same time, with the highest possible rapidity. Analytical research was confirmed by simulation and experimental results that are agree each other accurate to a few percent. Proposed method allows calculation the optimal motion trajectories for precise magnetic recorders and robotic arms.


  • Smooth Pulse-Width Modulation in Quasi-Resonant Pulsed Converters Using Transistor as a Voltage-Controlled Capacitance

    by Anatoliy S. Revko, Roman D. Yershov, Dmytro A. Beznosko, Denys S. Yakosenko

    The problems of usage the pulse-width modulation in quasi-resonant converters are considered. Dependence of the parasitic drain-source (collector-emitter) capacitance of power transistors on applied of gate-source (base-emitter) voltage was established. A novel clarification of the mathematical model for high-power bipolar-junction and field-effect transistors taking into account parasitic capacitance changing under control voltage was developed. The possibility of using pulse-width modulation in conjunction with a quasi-resonant converter by using of bipolar-junction and field-effect transistors as a voltage-controlled capacitance for changing the natural frequency of resonant circuit was proposed. Proposed converter eliminates the main disadvantage of quasi-resonant converters and can be use in portable power supply and energy storage systems.