Pierre Philippe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Pierre Philippe has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
Li-Hua Luu
INRAE, Aix Marseille Univ., RECOVER
7 shared publications- Stéphane Bonelli
INRAE, Aix-en-Provence, France
7 shared publications Florian Brunier-Coulin
Aix Marseille University
6 shared publicationsPablo Cuéllar
BAM, Federal Institute for Materials Research and Testing
6 shared publications- Pablo Cuéllar
Bayerisches Landesamt für Umwelt
6 shared publications - Nadia Benahmed
INRAE, Aix-Marseille Univ., RECOVER, Aix-en-Provence, France
5 shared publications
Latest Publications
- 5 March 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (3) , 035406
Visco-frictional trapping of particles percolating through a submerged granular medium
Particle filtration through a porous medium is a much-studied field because of its numerous industrial or natural applications, particularly for deep-bed and cake-type filtration regimes. The percolation regime has received relatively less attention and corresponds to the continuous motion of particles in a porous environment under the principal effect of gravity and generally without any interaction other than contact with the porous matrix. In the present case, both the moving particles and the porous medium are composed of spherical particles of diameters d and D, respectively. Dry percolation has been analyzed under such conditions and exhibits lateral diffusion, as well as a constant mean transit velocity that scales with sqrt[gD] (with D the coarse grain diameter and g gravity). The behavior is significantly different in the case studied here, where the porous stack is fully saturated by a liquid at rest. A previous study experimentally investigated the transition from deep filtration to the percolation regime under laminar flow conditions by matching the refractive index of the liquid to that of the particles of the porous system [C. Ghidaglia et al., Phys. Rev. E 53, R3028 (1996)1063-651X10.1103/PhysRevE.53.R3028]. Here, based on the same experimental technique, we focus on the particular case where there is no fluid flow and identify a different type of particle trapping, in contrast with either the dry condition or liquid flow situation. We show that this capture, which can exhibit high metastability, stems from a combination of solid friction and viscous lubrication, which strongly reduces the velocity of the moving particles and can also suppress any rebound. The complementary roles of the packing structure and both the size and shape of the particles are also highlighted.
- 5 March 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (3) , 035406
Visco-frictional trapping of particles percolating through a submerged granular medium
Particle filtration through a porous medium is a much-studied field because of its numerous industrial or natural applications, particularly for deep-bed and cake-type filtration regimes. The percolation regime has received relatively less attention and corresponds to the continuous motion of particles in a porous environment under the principal effect of gravity and generally without any interaction other than contact with the porous matrix. In the present case, both the moving particles and the porous medium are composed of spherical particles of diameters d and D, respectively. Dry percolation has been analyzed under such conditions and exhibits lateral diffusion, as well as a constant mean transit velocity that scales with sqrt[gD] (with D the coarse grain diameter and g gravity). The behavior is significantly different in the case studied here, where the porous stack is fully saturated by a liquid at rest. A previous study experimentally investigated the transition from deep filtration to the percolation regime under laminar flow conditions by matching the refractive index of the liquid to that of the particles of the porous system [C. Ghidaglia et al., Phys. Rev. E 53, R3028 (1996)1063-651X10.1103/PhysRevE.53.R3028]. Here, based on the same experimental technique, we focus on the particular case where there is no fluid flow and identify a different type of particle trapping, in contrast with either the dry condition or liquid flow situation. We show that this capture, which can exhibit high metastability, stems from a combination of solid friction and viscous lubrication, which strongly reduces the velocity of the moving particles and can also suppress any rebound. The complementary roles of the packing structure and both the size and shape of the particles are also highlighted.
- 14 January 2026
- Published by Springer Nature in Transport in Porous Media
- Vol. 153 (2) , 28
Comparative Study of Three Fine Grains Infiltration Techniques to Re–Fill Granular Materials Eroded by Suffusion
- 14 January 2026
- Published by Springer Nature in Transport in Porous Media
- Vol. 153 (2) , 28
Comparative Study of Three Fine Grains Infiltration Techniques to Re–Fill Granular Materials Eroded by Suffusion
- Open Access
- 1 December 2025
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 340, 10009
Impact of the fines content on stress fluctuations in bi-disperse granular mixtures during triaxial tests
In this experimental study, the influence of fines content and specimen preparation method on the mechanical behavior of granular mixtures have been explored by studying stress fluctuations that occur when the mixtures are subjected to drained triaxial tests. The magnitude and distribution of stress fluctuations are related to the changes in the microstructure of the ensemble. Bi-disperse granular mixtures of glass beads with a size ratio of 8.8, over the entire range of fines content F c (0% to 100%) were considered. The specimen were prepared using two standard specimen preparation techniques, dry deposition and moist tamping to recreate two distinct microstructures. It is found that in the under-filled regime where the stress transmission is mainly governed by the coarse particles, a significant increase in the magnitude of fluctuations is observed as the fines content, F c , increases, and on the contrary in the overfilled regime, where the load bearing structures are mainly made up of fines, fluctuations are found to decrease with further increase in F C which suggests that larger the interplay between coarse and fine particles, larger the fluctuations. Further investigation of these fluctuations in the context of critical avalanche dynamics or Self Organized Criticality (SOC) is performed.
- 1 December 2025
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 340, 10009
Open AccessImpact of the fines content on stress fluctuations in bi-disperse granular mixtures during triaxial tests
In this experimental study, the influence of fines content and specimen preparation method on the mechanical behavior of granular mixtures have been explored by studying stress fluctuations that occur when the mixtures are subjected to drained triaxial tests. The magnitude and distribution of stress fluctuations are related to the changes in the microstructure of the ensemble. Bi-disperse granular mixtures of glass beads with a size ratio of 8.8, over the entire range of fines content F c (0% to 100%) were considered. The specimen were prepared using two standard specimen preparation techniques, dry deposition and moist tamping to recreate two distinct microstructures. It is found that in the under-filled regime where the stress transmission is mainly governed by the coarse particles, a significant increase in the magnitude of fluctuations is observed as the fines content, F c , increases, and on the contrary in the overfilled regime, where the load bearing structures are mainly made up of fines, fluctuations are found to decrease with further increase in F C which suggests that larger the interplay between coarse and fine particles, larger the fluctuations. Further investigation of these fluctuations in the context of critical avalanche dynamics or Self Organized Criticality (SOC) is performed.
- Open Access
- 1 December 2025
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 340, 08001
Fluidization in cemented and uncemented granular soils with application to suction-assisted bucket embedment
Internal hydraulic flows in granular soils are known for their ability to partially or totally fluidize the material, thus causing a significant loss of mechanical strength. Although this effect is generally undesirable, it can be exploited in certain situations, in particular to facilitate the penetration and anchoring of a bucket-shaped foundation structure in the ground by controlled suction. This type of operation is, however, delicate, with the main risk being the formation of a localized fluidization zone (a phenomenon often called piping or rat-holing) which stops any further penetration of the bucket and may pose a risk to the structure integrity. Using a small-scale physical model built to qualitatively reproduce installation scenarios of foundations for offshore wind turbines, systematic experiments have made it possible to analyze the mechanism of a cylindrical bucket embedment under the effect of suction. Two different types of artificial granular soil are considered: glass beads with and without cementation by solid paraffin bonds. We present here a summary of the results obtained in terms of critical embedment conditions (pressure drop, flow rate) and embedment kinetics (final depth).
- 1 December 2025
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 340, 08001
Open AccessFluidization in cemented and uncemented granular soils with application to suction-assisted bucket embedment
Internal hydraulic flows in granular soils are known for their ability to partially or totally fluidize the material, thus causing a significant loss of mechanical strength. Although this effect is generally undesirable, it can be exploited in certain situations, in particular to facilitate the penetration and anchoring of a bucket-shaped foundation structure in the ground by controlled suction. This type of operation is, however, delicate, with the main risk being the formation of a localized fluidization zone (a phenomenon often called piping or rat-holing) which stops any further penetration of the bucket and may pose a risk to the structure integrity. Using a small-scale physical model built to qualitatively reproduce installation scenarios of foundations for offshore wind turbines, systematic experiments have made it possible to analyze the mechanism of a cylindrical bucket embedment under the effect of suction. Two different types of artificial granular soil are considered: glass beads with and without cementation by solid paraffin bonds. We present here a summary of the results obtained in terms of critical embedment conditions (pressure drop, flow rate) and embedment kinetics (final depth).
- Open Access
- 13 June 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 186
A fully-resolved micromechanical simulation of piping erosion during a suction bucket installation
- 13 June 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 186
Open AccessA fully-resolved micromechanical simulation of piping erosion during a suction bucket installation
- 24 December 2024
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 48 (2) , 129-146
Hole Erosion Test: Techniques for Determining the Post-erosion Diameter and Its Uncertainty
To quantify the erosion parameters and thus assess the erodibility of soils, hole erosion tests (HET) are used with methods of interpretation developed recently by researchers. The application of these methods requires some input data, and the most critical one is the final diameter of the eroded hole that is determined after completion of the test. The precision of the hole diameter after erosion leads to a better and more reliable evaluation of the soil’s resistance against erosion, more precisely the soil erodibility characteristics, τc (critical shear stress) and ker (erosion coefficient). In the present study, three methods for determining the final hole diameter are used: M1, direct weighing of the paraffin skeleton of the eroded hole; M2, differential mass of the sample before and after erosion; and M3, 3-D scanning technique of the paraffin skeleton. These methods were applied on five HET tests performed on soil samples containing the same percentage of Armorican kaolinite mixed with Hostun sand. The soil samples are compacted at different densities and to the optimum water content, as determined from a standard Proctor test. The results indicate that method M3 based on a 3-D scanner acquisition and processing of the skeleton volume after erosion compares very well with the more usual ones, M1 and M2, with the obvious advantage of providing the full 3-D reconstruction of the post-erosion hole, allowing further investigations (morphological analyses). Furthermore, an assessment of the uncertainty in predicting erodibility, particularly associated with the post-erosion diameter calculated through the three methods, was conducted and yielded satisfactory outcomes.
- 24 December 2024
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 48 (2) , 129-146
Hole Erosion Test: Techniques for Determining the Post-erosion Diameter and Its Uncertainty
To quantify the erosion parameters and thus assess the erodibility of soils, hole erosion tests (HET) are used with methods of interpretation developed recently by researchers. The application of these methods requires some input data, and the most critical one is the final diameter of the eroded hole that is determined after completion of the test. The precision of the hole diameter after erosion leads to a better and more reliable evaluation of the soil’s resistance against erosion, more precisely the soil erodibility characteristics, τc (critical shear stress) and ker (erosion coefficient). In the present study, three methods for determining the final hole diameter are used: M1, direct weighing of the paraffin skeleton of the eroded hole; M2, differential mass of the sample before and after erosion; and M3, 3-D scanning technique of the paraffin skeleton. These methods were applied on five HET tests performed on soil samples containing the same percentage of Armorican kaolinite mixed with Hostun sand. The soil samples are compacted at different densities and to the optimum water content, as determined from a standard Proctor test. The results indicate that method M3 based on a 3-D scanner acquisition and processing of the skeleton volume after erosion compares very well with the more usual ones, M1 and M2, with the obvious advantage of providing the full 3-D reconstruction of the post-erosion hole, allowing further investigations (morphological analyses). Furthermore, an assessment of the uncertainty in predicting erodibility, particularly associated with the post-erosion diameter calculated through the three methods, was conducted and yielded satisfactory outcomes.
- 22 September 2024
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 32 (3) , 1369-1397
Critical Comparison of Motion Integration Strategies and Discretization Choices in the Material Point Method
- 22 September 2024
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 32 (3) , 1369-1397
Critical Comparison of Motion Integration Strategies and Discretization Choices in the Material Point Method
- 24 June 2024
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 9 (6) , 064305
Hydraulic failure of granular materials with artificial cementation
This paper presents an experimental study on the hydraulic failure of a submerged layer of cemented soil stressed by a localized upward water flow. Different mixtures of glass beads bonded with solid paraffin bridges were used as artificial material for the cemented granular soil. Variations in the cementation strength of the material were carefully introduced with different particle sizes and binder contents. The hydraulic fracture tests were then carried out with an upward flow injected at a controlled rate through a small section at the bottom of the samples. From a phenomenological perspective, the results reveal the existence of at least three modes of failure for a cemented soil layer: (1) overall block uplift, (2) block rupture by median crack at the inflow zone, and (3) progressive excavation of a fluidized path along the walls. The critical flow rate and pressure drop conditions at failure have been carefully quantified for the different mixtures and layer thicknesses, leading to a fair estimation of the hydraulic resistance of the samples, which here is found to be virtually independent of the grain size. However, the test results also showed inconsistent failure modes precluding so far the derivation of a simple phase diagram. Nevertheless, it was possible to rationalize all the measured data by employing appropriate modifications of the classical dimensionless numbers that describe the fluidization of purely frictional materials, whereby the cementation strength of the soil is quantified at the microscale through the yield tensile force of the intergranular bonds. Irrespective of its subsequent development, during which boundary conditions obviously play a major role, the initiation of the instability appears to take place very locally at the inlet when the drag force induced by the flow overcomes the cementation strength of the paraffin bonds. The results of this study thus appear to endorse the extension of the dimensional relationships of particulate systems in interaction with fluid flows to the case of cemented granular materials, in a similar vein as in recent previous studies.
- 24 June 2024
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 9 (6) , 064305
Hydraulic failure of granular materials with artificial cementation
This paper presents an experimental study on the hydraulic failure of a submerged layer of cemented soil stressed by a localized upward water flow. Different mixtures of glass beads bonded with solid paraffin bridges were used as artificial material for the cemented granular soil. Variations in the cementation strength of the material were carefully introduced with different particle sizes and binder contents. The hydraulic fracture tests were then carried out with an upward flow injected at a controlled rate through a small section at the bottom of the samples. From a phenomenological perspective, the results reveal the existence of at least three modes of failure for a cemented soil layer: (1) overall block uplift, (2) block rupture by median crack at the inflow zone, and (3) progressive excavation of a fluidized path along the walls. The critical flow rate and pressure drop conditions at failure have been carefully quantified for the different mixtures and layer thicknesses, leading to a fair estimation of the hydraulic resistance of the samples, which here is found to be virtually independent of the grain size. However, the test results also showed inconsistent failure modes precluding so far the derivation of a simple phase diagram. Nevertheless, it was possible to rationalize all the measured data by employing appropriate modifications of the classical dimensionless numbers that describe the fluidization of purely frictional materials, whereby the cementation strength of the soil is quantified at the microscale through the yield tensile force of the intergranular bonds. Irrespective of its subsequent development, during which boundary conditions obviously play a major role, the initiation of the instability appears to take place very locally at the inlet when the drag force induced by the flow overcomes the cementation strength of the paraffin bonds. The results of this study thus appear to endorse the extension of the dimensional relationships of particulate systems in interaction with fluid flows to the case of cemented granular materials, in a similar vein as in recent previous studies.
- 10 May 2024
- Published by Springer Nature in Granular Matter
- Vol. 26 (3) , 1-20
Micro and macro mechanical characterization of artificial cemented granular materials
- 10 May 2024
- Published by Springer Nature in Granular Matter
- Vol. 26 (3) , 1-20
Micro and macro mechanical characterization of artificial cemented granular materials
- 19 January 2024
- Published by Springer Nature in Granular Matter
- Vol. 26 (1) , 1-26
Investigation techniques and physical aspects of the angle of repose of granular matter
- 19 January 2024
- Published by Springer Nature in Granular Matter
- Vol. 26 (1) , 1-26
Investigation techniques and physical aspects of the angle of repose of granular matter