Bruce D. Kay
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bruce D. Kay has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Ronald Scott Smith
Physical and Computational Sciences Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
26 shared publications - Zdenek Dohnálek
Physical and Computational Sciences Directorate and Institute for Integrated Catalysis, Pacific Northwest National Laboratory, Richland, USA
19 shared publications - Gregory A. Kimmel
Physical and Computational Sciences Directorate and Institute for Integrated Catalysis, Pacific Northwest National Laboratory, Richland, USA
15 shared publications - Loni Kringle
Physical Sciences Division, Pacific Northwest National Laboratory , P.O. Box 999, Richland, Washington 99352
7 shared publications - Christopher J. Lee
Pacific Northwest National Laboratory
6 shared publications - Marcus A. Sharp
Pacific Northwest National Laboratory
6 shared publications
Latest Publications
- 23 January 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (3) , 2840-2848
Role of Surface Hydroxyls and Lattice Oxygen in Governing Selectivity and Restructuring During Acetic Acid Conversion on Fe 3 O 4 (001)
- 23 January 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (3) , 2840-2848
Role of Surface Hydroxyls and Lattice Oxygen in Governing Selectivity and Restructuring During Acetic Acid Conversion on Fe 3 O 4 (001)
- Open Access
- 12 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Lattice Oxygen Insertion into CO and CO2 Products during Formic Acid Decomposition on Fe3O4(001)
We investigated the complex processes occurring with formic acid dehydration and dehydrogenation occurring within the high temperature region (HT2, >540 K) on Fe3O4(001). Our prior study focused on the low temperature region (HT1, <540 K), and found that surface hydroxyl interaction with an embedded formate intermediate, reaction of formate with an oxygen vacancy, facilitate the dehydration reaction and formation of CO. Focusing on the HT2 region, Temperature programmed reaction spectroscopy (TPRS) performed on O18-labeled Fe3O4(001) uncovers the formation lattice oxygen containing CO and CO2 products suggesting intimate participation of the surface. Surface pitting was observed to occur by 700 K in scanning tunneling microscopy (STM) images and arises due to Mars-van Krevelen mediated water and surface oxygen vacancy formation. Repeat TPRS experiments limited to 625 K, such that oxygen vacancies are allowed to accumulate, demonstrate a shift in selectivity away from dehydration and toward dehydrogenation reaction products. The TPRS and STM data suggest a strong connection between surface oxygen vacancies and oxygen incorporation into product species. We propose that within the HT2 region, the accumulation of oxygen vacancies facilitate further oxygen donation to the surface through the formation of doubly-embedded formate species. Through diffusion of the resulting C─H fragment, new C─O bonds are formed leading to lattice oxygen incorporation into the CO and CO2 products. This study not only furthers our understanding of the dehydration and dehydrogenation processes occurring at the Fe3O4(001) surface, but also for heterogeneous metal oxide catalysis.
- 12 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLattice Oxygen Insertion into CO and CO2 Products during Formic Acid Decomposition on Fe3O4(001)
We investigated the complex processes occurring with formic acid dehydration and dehydrogenation occurring within the high temperature region (HT2, >540 K) on Fe3O4(001). Our prior study focused on the low temperature region (HT1, <540 K), and found that surface hydroxyl interaction with an embedded formate intermediate, reaction of formate with an oxygen vacancy, facilitate the dehydration reaction and formation of CO. Focusing on the HT2 region, Temperature programmed reaction spectroscopy (TPRS) performed on O18-labeled Fe3O4(001) uncovers the formation lattice oxygen containing CO and CO2 products suggesting intimate participation of the surface. Surface pitting was observed to occur by 700 K in scanning tunneling microscopy (STM) images and arises due to Mars-van Krevelen mediated water and surface oxygen vacancy formation. Repeat TPRS experiments limited to 625 K, such that oxygen vacancies are allowed to accumulate, demonstrate a shift in selectivity away from dehydration and toward dehydrogenation reaction products. The TPRS and STM data suggest a strong connection between surface oxygen vacancies and oxygen incorporation into product species. We propose that within the HT2 region, the accumulation of oxygen vacancies facilitate further oxygen donation to the surface through the formation of doubly-embedded formate species. Through diffusion of the resulting C─H fragment, new C─O bonds are formed leading to lattice oxygen incorporation into the CO and CO2 products. This study not only furthers our understanding of the dehydration and dehydrogenation processes occurring at the Fe3O4(001) surface, but also for heterogeneous metal oxide catalysis.
- Open Access
- 23 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Role of Surface Hydroxyls and Lattice Oxygen in Governing Selectivity and Restructuring during Acetic Acid Conversion on Fe3O4(001)
Understanding the reactivity of carboxylic acids on metal oxide surfaces is critical for elucidating ketonization mechanisms relevant to biomass upgrading. Here, we investigate the adsorption and thermal decomposition of acetic acid (CH3COOH) on Fe3O4(001) using scanning tunneling microscopy (STM), temperature-programmed reaction spectroscopy (TPRS), and X-ray photoelectron spectroscopy (XPS). At room temperature, acetic acid adsorbs dissociatively to form ordered bidentate acetate (CH3COO) overlayer that lifts the (√2×√2)R45° surface reconstruction. TPRS reveals ketene (CH2CO) as the dominant product, along with CO, CO2, and H2O, the latter evolving via a Mars–van Krevelen (MvK) mechanism. Isotopic labeling shows preferential CO2 formation from the carboxyl carbon and a more balanced CO/CO2 ratio from the methyl carbon, suggesting distinct oxidation pathways. STM imaging reveals embedded acetate intermediates filling surface oxygen vacancies created in MvK steps. Upon product formation completion (~700 K), extensive surface etching is observed, with pits elongated along the octahedral Fe rows. Approximately 20% of the surface oxygen is removed, consistent with vacancy formation stoichiometry inferred from product distributions. These findings demonstrate that carboxylate-induced restructuring of Fe3O4(001) involves both surface healing and reduction processes, offering mechanistic insights relevant to ketonization and broader carboxylic acid chemistry on metal oxides.
- 23 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRole of Surface Hydroxyls and Lattice Oxygen in Governing Selectivity and Restructuring during Acetic Acid Conversion on Fe3O4(001)
Understanding the reactivity of carboxylic acids on metal oxide surfaces is critical for elucidating ketonization mechanisms relevant to biomass upgrading. Here, we investigate the adsorption and thermal decomposition of acetic acid (CH3COOH) on Fe3O4(001) using scanning tunneling microscopy (STM), temperature-programmed reaction spectroscopy (TPRS), and X-ray photoelectron spectroscopy (XPS). At room temperature, acetic acid adsorbs dissociatively to form ordered bidentate acetate (CH3COO) overlayer that lifts the (√2×√2)R45° surface reconstruction. TPRS reveals ketene (CH2CO) as the dominant product, along with CO, CO2, and H2O, the latter evolving via a Mars–van Krevelen (MvK) mechanism. Isotopic labeling shows preferential CO2 formation from the carboxyl carbon and a more balanced CO/CO2 ratio from the methyl carbon, suggesting distinct oxidation pathways. STM imaging reveals embedded acetate intermediates filling surface oxygen vacancies created in MvK steps. Upon product formation completion (~700 K), extensive surface etching is observed, with pits elongated along the octahedral Fe rows. Approximately 20% of the surface oxygen is removed, consistent with vacancy formation stoichiometry inferred from product distributions. These findings demonstrate that carboxylate-induced restructuring of Fe3O4(001) involves both surface healing and reduction processes, offering mechanistic insights relevant to ketonization and broader carboxylic acid chemistry on metal oxides.
- 25 July 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (16-17) , 1848-1856
Active Site Evolution during Formic Acid Conversion on Rh-Substituted Fe3O4(001)
- 25 July 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (16-17) , 1848-1856
Active Site Evolution during Formic Acid Conversion on Rh-Substituted Fe3O4(001)
- Open Access
- 24 June 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (24)
Translational diffusion in supercooled water at and near the glass transition temperature—136 K
The properties of amorphous solid water at and near the calorimetric glass transition temperature, Tg, of 136 K have been debated for years. One hypothesis is that water turns into a “true” liquid at Tg (i.e., it becomes ergodic) and exhibits all the characteristics of an ergodic liquid, including translational diffusion. A competing hypothesis is that only rotational motion becomes active at Tg, while the “real” glass transition in water is at a considerably higher temperature. To address this dispute, we have investigated the diffusive mixing in nanoscale water films, with thicknesses up to ∼100 nm, using infrared (IR) spectroscopy. The experiments used films that were composed of at least 90% H2O with D2O making up the balance and were conducted under conditions where H/D exchange was essentially eliminated. Because the IR spectra of multilayer D2O films (e.g., thicknesses of ∼3–6 nm) embedded within thick H2O films are distinct from the spectrum of isolated D2O molecules within H2O, the diffusive mixing of (initially) isotopically layered water films could be followed as a function of annealing time and temperature. The results show that water films with total thicknesses ranging from ∼20 to 100 nm diffusively mixed prior to crystallization for temperatures between 120 and 144 K. The translational diffusion had an Arrhenius temperature dependence with an activation energy of 40.8 ± 3.5 kJ/mol, which indicates that water at and near Tg is a strong liquid. The measured diffusion coefficient at 136 K is 6.25 ± 1.4 × 10−21 m2/s.
- 24 June 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (24)
Open AccessTranslational diffusion in supercooled water at and near the glass transition temperature—136 K
The properties of amorphous solid water at and near the calorimetric glass transition temperature, Tg, of 136 K have been debated for years. One hypothesis is that water turns into a “true” liquid at Tg (i.e., it becomes ergodic) and exhibits all the characteristics of an ergodic liquid, including translational diffusion. A competing hypothesis is that only rotational motion becomes active at Tg, while the “real” glass transition in water is at a considerably higher temperature. To address this dispute, we have investigated the diffusive mixing in nanoscale water films, with thicknesses up to ∼100 nm, using infrared (IR) spectroscopy. The experiments used films that were composed of at least 90% H2O with D2O making up the balance and were conducted under conditions where H/D exchange was essentially eliminated. Because the IR spectra of multilayer D2O films (e.g., thicknesses of ∼3–6 nm) embedded within thick H2O films are distinct from the spectrum of isolated D2O molecules within H2O, the diffusive mixing of (initially) isotopically layered water films could be followed as a function of annealing time and temperature. The results show that water films with total thicknesses ranging from ∼20 to 100 nm diffusively mixed prior to crystallization for temperatures between 120 and 144 K. The translational diffusion had an Arrhenius temperature dependence with an activation energy of 40.8 ± 3.5 kJ/mol, which indicates that water at and near Tg is a strong liquid. The measured diffusion coefficient at 136 K is 6.25 ± 1.4 × 10−21 m2/s.
- 20 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (13) , 3198-3205
Supercooled Liquid Water Diffusivity at Temperatures near the Glass Transition Temperature
Isotopically layered amorphous solid water films were used to measure the diffusivity of deeply supercooled liquid water near the glass transition. The films, composed of separate H218O and H216O layers, were grown by vapor deposition at low temperature and then heated to observe the intermixing of the isotopic layers. Very slow heating rates (as low as 10-4 K/s) were used to decouple the diffusion and crystallization processes to ensure that the observed intermixing occurred at temperatures that were well-separated from the onset of crystallization. Numerical simulations of the desorption spectra were used to extract the translational diffusivities. The diffusivities obtained in this paper are consistent with translational liquid-like motion at temperatures near and above the proposed Tg of 136 K. These findings support the idea that the melt of amorphous water, above its glass transition temperature is thermodynamically continuous with normal supercooled liquid.
- 20 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (13) , 3198-3205
Supercooled Liquid Water Diffusivity at Temperatures near the Glass Transition Temperature
Isotopically layered amorphous solid water films were used to measure the diffusivity of deeply supercooled liquid water near the glass transition. The films, composed of separate H218O and H216O layers, were grown by vapor deposition at low temperature and then heated to observe the intermixing of the isotopic layers. Very slow heating rates (as low as 10-4 K/s) were used to decouple the diffusion and crystallization processes to ensure that the observed intermixing occurred at temperatures that were well-separated from the onset of crystallization. Numerical simulations of the desorption spectra were used to extract the translational diffusivities. The diffusivities obtained in this paper are consistent with translational liquid-like motion at temperatures near and above the proposed Tg of 136 K. These findings support the idea that the melt of amorphous water, above its glass transition temperature is thermodynamically continuous with normal supercooled liquid.
- Open Access
Supercooled Liquid Water Diffusivity at Temperatures near the Glass Transition Temperature
Isotopically layered amorphous solid water films were used to measure the diffusivity of deeply supercooled liquid water near the glass transition. The films, composed of separate layers of oxygen 16 and oxygen 18 labeled water, were grown by vapor deposition at low temperature and then heated to observe the intermixing of the isotopic layers. Very slow heating rates (as low as 0.0001 K/s) were used to decouple the diffusion and crystallization processes to ensure that the observed intermixing occurred at temperatures that were well-separated from the onset of crystallization. Numerical simulations of the desorption spectra were used to extract the translational diffusivities. The diffusivities obtained in this paper are consistent with translational liquid-like motion at temperatures near and above the proposed Tg of 136 K. These findings support the idea that the melt of amorphous water, above its glass transition temperature is thermodynamically continuous with normal supercooled liquid.
Open AccessSupercooled Liquid Water Diffusivity at Temperatures near the Glass Transition Temperature
Isotopically layered amorphous solid water films were used to measure the diffusivity of deeply supercooled liquid water near the glass transition. The films, composed of separate layers of oxygen 16 and oxygen 18 labeled water, were grown by vapor deposition at low temperature and then heated to observe the intermixing of the isotopic layers. Very slow heating rates (as low as 0.0001 K/s) were used to decouple the diffusion and crystallization processes to ensure that the observed intermixing occurred at temperatures that were well-separated from the onset of crystallization. Numerical simulations of the desorption spectra were used to extract the translational diffusivities. The diffusivities obtained in this paper are consistent with translational liquid-like motion at temperatures near and above the proposed Tg of 136 K. These findings support the idea that the melt of amorphous water, above its glass transition temperature is thermodynamically continuous with normal supercooled liquid.
- 3 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (6) , 2988-3002
The Role of Surface Hydroxyls in Dehydration and Dehydrogenation of Formic Acid on Fe3O4(001)
- 3 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (6) , 2988-3002
The Role of Surface Hydroxyls in Dehydration and Dehydrogenation of Formic Acid on Fe3O4(001)
- Open Access
- 20 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
The Role of Surface Hydroxyls in Dehydration and Dehydrogenation of Formic Acid on Fe3O4(001)
Understanding the role of surface structure and hydroxylation in catalytic reactions on metal oxide surfaces is important for developing a mechanistic insight into the complex interface processes. Here, we investigate the reactivity of formic acid on reconstructed Fe3O4(001) using a combination of X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, temperature-programmed reaction spectroscopy, low energy electron diffraction, and electronic structure calculations. We find that formic acid initially dissociates at low temperatures ( 450 K), formate largely decomposes along the dehydration pathway, producing CO and H2O, with dehydrogenation to CO2 being a minority side reaction. As a first step, water formation leads to surface oxygen extraction via the Mars-van Krevelen mechanism. Computational studies reveal formate embedded in oxygen vacancies as a key intermediate in the CO formation mechanism. CO formation proceeds via two reaction pathways with desorption that peaks at 530 K on the hydroxyl-rich surface and 560 K on the hydroxyl-deficient surface. Atomic hydrogen coadsorption experiments and ab initio calculations reveal that the presence of surface hydroxyls reduces the CO formation barrier. These results highlight the complex interactions between substrate and intermediate species occurring during reactions on metal oxide surfaces.
- 20 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe Role of Surface Hydroxyls in Dehydration and Dehydrogenation of Formic Acid on Fe3O4(001)
Understanding the role of surface structure and hydroxylation in catalytic reactions on metal oxide surfaces is important for developing a mechanistic insight into the complex interface processes. Here, we investigate the reactivity of formic acid on reconstructed Fe3O4(001) using a combination of X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, temperature-programmed reaction spectroscopy, low energy electron diffraction, and electronic structure calculations. We find that formic acid initially dissociates at low temperatures ( 450 K), formate largely decomposes along the dehydration pathway, producing CO and H2O, with dehydrogenation to CO2 being a minority side reaction. As a first step, water formation leads to surface oxygen extraction via the Mars-van Krevelen mechanism. Computational studies reveal formate embedded in oxygen vacancies as a key intermediate in the CO formation mechanism. CO formation proceeds via two reaction pathways with desorption that peaks at 530 K on the hydroxyl-rich surface and 560 K on the hydroxyl-deficient surface. Atomic hydrogen coadsorption experiments and ab initio calculations reveal that the presence of surface hydroxyls reduces the CO formation barrier. These results highlight the complex interactions between substrate and intermediate species occurring during reactions on metal oxide surfaces.
- Open Access
- 26 December 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (24)
Proton diffusion and hydrogen/deuterium exchange in amorphous solid water at temperatures from 114 to 134 K
The reaction coefficient for hydrogen/deuterium (H/D) exchange and the diffusion of hydrated excess protons within amorphous solid water (ASW) are characterized as a function of temperature. For these experiments, water films are deposited on a Pt(111) substrate at 108 K, and reactions with pre-adsorbed hydrogen atoms produce hydrated protons. Upon heating, protons diffuse within the water, and H/D exchange occurs when they encounter D2O probe molecules deposited in the films. The time-dependent concentration of D2O is monitored with infrared spectroscopy, and it indicates the protons diffusion from the substrate and establish an equilibrium distribution prior to significant H/D exchange for temperatures 114 K ≤T≤ 134 K. By controlling the distance between the D2O molecules and the substrate, we probe the distribution of protons within the film. It decays as x−2 for the examined range of x (12–52 nm) due to the electric field that develops between the diffusing protons and their image charges in the metal substrate. This agrees with the theoretical distance scaling for the equilibrated proton concentration in a dielectric near a metal boundary. From the proton concentration and the measured D2O decay rate, a lower bound for the proton diffusion coefficient ranging from 10−20 m2/s at 114 K to 10−18 m2/s at 134 K is estimated. The diffusion coefficient has an activation energy of 0.40 eV, which is comparable to energies reported for molecular translations and rotations of H2O, suggesting they may play a critical role in the proton diffusion mechanism within ASW.
- 26 December 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (24)
Open AccessProton diffusion and hydrogen/deuterium exchange in amorphous solid water at temperatures from 114 to 134 K
The reaction coefficient for hydrogen/deuterium (H/D) exchange and the diffusion of hydrated excess protons within amorphous solid water (ASW) are characterized as a function of temperature. For these experiments, water films are deposited on a Pt(111) substrate at 108 K, and reactions with pre-adsorbed hydrogen atoms produce hydrated protons. Upon heating, protons diffuse within the water, and H/D exchange occurs when they encounter D2O probe molecules deposited in the films. The time-dependent concentration of D2O is monitored with infrared spectroscopy, and it indicates the protons diffusion from the substrate and establish an equilibrium distribution prior to significant H/D exchange for temperatures 114 K ≤T≤ 134 K. By controlling the distance between the D2O molecules and the substrate, we probe the distribution of protons within the film. It decays as x−2 for the examined range of x (12–52 nm) due to the electric field that develops between the diffusing protons and their image charges in the metal substrate. This agrees with the theoretical distance scaling for the equilibrated proton concentration in a dielectric near a metal boundary. From the proton concentration and the measured D2O decay rate, a lower bound for the proton diffusion coefficient ranging from 10−20 m2/s at 114 K to 10−18 m2/s at 134 K is estimated. The diffusion coefficient has an activation energy of 0.40 eV, which is comparable to energies reported for molecular translations and rotations of H2O, suggesting they may play a critical role in the proton diffusion mechanism within ASW.