Karim Hassan Youssef
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Karim Hassan Youssef has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Hassan A. Yousef
Department of Electrical and Computer Engineering, College of Engineering, Sultan Qaboos University, Muscat 123, Oman
3 shared publications Manal A. Wahba
Department of Electrical Engineering , Alexandria University , Alexandria, Egypt
3 shared publications- Ahmed Abdullah Hossam-Eldin
Alexandria University,Electrical Engineering Department,Alexandria,Egypt,21544
2 shared publications Omar A. Sebakhy
Department of Electrical Engineering , Alexandria University , Alexandria, Egypt
2 shared publicationsA. Abdelrehim
Department of Electrical Engineering, Alexandria University, Alexandria, Egypt
1 shared publicationA. El Zawawi
Department of Electrical Engineering, Alexandria University, 21544, Egypt
1 shared publication
Latest Publications
- Open Access
- 18 February 2026
- Published by MDPI AG in Technologies
- Vol. 14 (2) , 130
Online Fault Detection, Classification and Localization in PV Arrays Using Feedforward Neural Networks and Residual-Based Modeling
Fast and reliable fault detection is critical in photovoltaic (PV) systems to improve reliability and energy yield and reduce maintenance costs, ensuring safe and efficient operation under varying operating conditions. Although recent data-driven PV fault detection techniques (FDTs) in literature have demonstrated high diagnostic accuracies, they often suffer from practical limitations, offline operation, lack of fault localization and/or inability to concurrently identify faults. To address these challenges, a unified framework is proposed that simultaneously integrates real-time operation, fault classification and localization, and concurrent-fault identification in a single compact diagnostic approach. This is realized by developing a parallel feedforward neural network (FFNN) architecture whose performance is enhanced by a residual model-based structure, resulting in a more interpretable, scalable, reliable and accurate scheme. In addition, Grey Wolf Optimizer–Support Vector Machine (GWO–SVM) feature selection is incorporated to select the most influential diagnostic features, thus reducing data redundancy, enhancing diagnostic accuracy, and shortening training time. The proposed approach was tested to diagnose five types of PV faults (open circuit, short circuit, partial shading, degradation, and simultaneous faults), as well as classify their intensity and location. Simulation results show that the proposed FFNNs consistently outperform conventional Support Vector Machines (SVMs) in classification accuracy, with accuracies exceeding 98% and 99% for fault classification and localization, respectively, and above 95% for noisy data. Moreover, GWO-SVM proved to offer more stable feature subsets compared to Particle Swarm Optimization–SVM (PSO–SVM) in the considered feature selection structure. Simulation results validated the effectiveness of the proposed unified multiclassification fault diagnosis approach, even under system uncertainties, making it suited for real-world PV systems.
- 18 February 2026
- Published by MDPI AG in Technologies
- Vol. 14 (2) , 130
Open AccessOnline Fault Detection, Classification and Localization in PV Arrays Using Feedforward Neural Networks and Residual-Based Modeling
Fast and reliable fault detection is critical in photovoltaic (PV) systems to improve reliability and energy yield and reduce maintenance costs, ensuring safe and efficient operation under varying operating conditions. Although recent data-driven PV fault detection techniques (FDTs) in literature have demonstrated high diagnostic accuracies, they often suffer from practical limitations, offline operation, lack of fault localization and/or inability to concurrently identify faults. To address these challenges, a unified framework is proposed that simultaneously integrates real-time operation, fault classification and localization, and concurrent-fault identification in a single compact diagnostic approach. This is realized by developing a parallel feedforward neural network (FFNN) architecture whose performance is enhanced by a residual model-based structure, resulting in a more interpretable, scalable, reliable and accurate scheme. In addition, Grey Wolf Optimizer–Support Vector Machine (GWO–SVM) feature selection is incorporated to select the most influential diagnostic features, thus reducing data redundancy, enhancing diagnostic accuracy, and shortening training time. The proposed approach was tested to diagnose five types of PV faults (open circuit, short circuit, partial shading, degradation, and simultaneous faults), as well as classify their intensity and location. Simulation results show that the proposed FFNNs consistently outperform conventional Support Vector Machines (SVMs) in classification accuracy, with accuracies exceeding 98% and 99% for fault classification and localization, respectively, and above 95% for noisy data. Moreover, GWO-SVM proved to offer more stable feature subsets compared to Particle Swarm Optimization–SVM (PSO–SVM) in the considered feature selection structure. Simulation results validated the effectiveness of the proposed unified multiclassification fault diagnosis approach, even under system uncertainties, making it suited for real-world PV systems.
- 1 January 2023
- Published by Inderscience Publishers in International Journal of Power Electronics
- Vol. 17 (4) , 495
Power quality improvement of microgrid fed electric ship using fuzzy controlled multi-pulse/multi-level converter-based VFD
- 1 January 2023
- Published by Inderscience Publishers in International Journal of Power Electronics
- Vol. 17 (4) , 495
Power quality improvement of microgrid fed electric ship using fuzzy controlled multi-pulse/multi-level converter-based VFD
- 13 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 13 (2) , 877-887
Microgrid Reliability Considering Directional Protection Failure and Optimal Load Shedding
This paper addresses reliability evaluation of microgrid with distributed generation and directional protection considering protection failure. A second-order Markov-based method that considers up to two simultaneous faults and a first order approximate method have been proposed. AC Optimal Load Shedding (AC-OLS) is adopted in each state considering network constraints in all resulted islands. Simulation results are given to assess the effect of protection failure probability on reliability indices. The effects of tie-lines, loop operation, switching time, energy storage and network constraints are investigated. The proposed method can be used for studying feasibility of investment on protection upgrade and preventive maintenance to reduce protection failure probability. The proposed algorithms can also be utilized for evaluating effect of protection schemes and coordination on reliability.
- 13 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 13 (2) , 877-887
Microgrid Reliability Considering Directional Protection Failure and Optimal Load Shedding
This paper addresses reliability evaluation of microgrid with distributed generation and directional protection considering protection failure. A second-order Markov-based method that considers up to two simultaneous faults and a first order approximate method have been proposed. AC Optimal Load Shedding (AC-OLS) is adopted in each state considering network constraints in all resulted islands. Simulation results are given to assess the effect of protection failure probability on reliability indices. The effects of tie-lines, loop operation, switching time, energy storage and network constraints are investigated. The proposed method can be used for studying feasibility of investment on protection upgrade and preventive maintenance to reduce protection failure probability. The proposed algorithms can also be utilized for evaluating effect of protection schemes and coordination on reliability.
- 1 October 2021
- Published by Elsevier in Electric Power Systems Research
- Vol. 199
Optimal routing of ring power distribution systems
- 1 October 2021
- Published by Elsevier in Electric Power Systems Research
- Vol. 199
Optimal routing of ring power distribution systems
- 8 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 37 (4) , 2429-2439
Optimal Routing and Design of Radial Medium Voltage Power Distribution Networks Considering Cables Short Circuit Withstand-Capacity
Cables short circuit withstand-capacity plays a crucial role in medium voltage distribution system design. For a given short circuit level at substation, fault current at any point in a radial distribution system depends on the location with respect to the substation, distributed generation as well as size and length of upstream cable sections. This paper addresses optimal routing, cable sizing, distributed generation allocation and sizing of radial medium voltage power distribution network considering cables short circuit withstand capacity. Both synchronous-based and inverter-based distributed generators are considered. Complete formulation of cables short circuit constraints (SCCs) is introduced in mixed-integer linear programming (MILP) form. A Benders-decomposition-based approach is used to solve the problem by considering short circuit at each system bus in a separate slave feasibility problem. Combinatorial cuts are proposed to exclude infeasible solutions in each iteration by investigating upstream routes, cable sizes and distributed generation. The proposed optimization framework and solution algorithm are applied on 54 bus, 84 bus and 138 bus systems. The results revealed potential saving in investment, maintenance and losses costs compared to upgrading method. Also the proposed solution algorithm showed great saving in the number of added constraints to the original problem.
- 8 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 37 (4) , 2429-2439
Optimal Routing and Design of Radial Medium Voltage Power Distribution Networks Considering Cables Short Circuit Withstand-Capacity
Cables short circuit withstand-capacity plays a crucial role in medium voltage distribution system design. For a given short circuit level at substation, fault current at any point in a radial distribution system depends on the location with respect to the substation, distributed generation as well as size and length of upstream cable sections. This paper addresses optimal routing, cable sizing, distributed generation allocation and sizing of radial medium voltage power distribution network considering cables short circuit withstand capacity. Both synchronous-based and inverter-based distributed generators are considered. Complete formulation of cables short circuit constraints (SCCs) is introduced in mixed-integer linear programming (MILP) form. A Benders-decomposition-based approach is used to solve the problem by considering short circuit at each system bus in a separate slave feasibility problem. Combinatorial cuts are proposed to exclude infeasible solutions in each iteration by investigating upstream routes, cable sizes and distributed generation. The proposed optimization framework and solution algorithm are applied on 54 bus, 84 bus and 138 bus systems. The results revealed potential saving in investment, maintenance and losses costs compared to upgrading method. Also the proposed solution algorithm showed great saving in the number of added constraints to the original problem.
- Open Access
- 11 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 610 (1) , 012091
Improved perturb and observe maximum peak power tracking for solar satellite systems
The aim of this work is to solve partial shading problem in solar panels to detect the global peak power point that can be used in satellite systems. This can be done by proposing a modified perturb and observe control algorithm depends on comparing all the local peak power points in photovoltaic system to detect the global one, by making initial estimation to the duty cycles of the corresponding local peak power then using perturb and observe to make fine tuning to reach the exact local peak points when oscillations happen. Also to detect the oscillations theory of operation of incremental conductance algorithm is used depending on the difference between incremental conductance and the instantaneous conductance values. The idea of operation is verified using boost converter applied in Matlab/Simulink showing good results. Also variable duty cycle is used to solve the problem of oscillations in output power.
- 11 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 610 (1) , 012091
Open AccessImproved perturb and observe maximum peak power tracking for solar satellite systems
The aim of this work is to solve partial shading problem in solar panels to detect the global peak power point that can be used in satellite systems. This can be done by proposing a modified perturb and observe control algorithm depends on comparing all the local peak power points in photovoltaic system to detect the global one, by making initial estimation to the duty cycles of the corresponding local peak power then using perturb and observe to make fine tuning to reach the exact local peak points when oscillations happen. Also to detect the oscillations theory of operation of incremental conductance algorithm is used depending on the difference between incremental conductance and the instantaneous conductance values. The idea of operation is verified using boost converter applied in Matlab/Simulink showing good results. Also variable duty cycle is used to solve the problem of oscillations in output power.
- Open Access
- 22 March 2019
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in Turkish Journal of Electrical Engineering and Computer Sciences
- Vol. 27 (2) , 1181-1197
Power quality improvement of smart microgrids using EMS-based fuzzy controlled UPQC
The prevalent power quality problems in smart microgrids and power distribution systems are voltage sag, voltage swell, and harmonic distortion. The achievement of pure sinusoidal waveform with proper magnitude and phase is currently a great research and development concern. The aim of this paper is to evaluate and mitigate the smart microgrid harmonics, voltage sag, and voltage swell throughout a 24-h cycle, taking into consideration the variation in solar power generation due to changes in irradiation received by photovoltaic cells, the variation in wind power generation due to changes in wind speed, and the variation of linear and nonlinear load profiles during the day’s cycle. The mitigation of the power quality issues manifested in current harmonics, voltage sag, and voltage swell is achieved through the implementation of a new fully fuzzy controlled unified power quality conditioner (UPQC). It is controlled by an energy management system (EMS). This paper introduces a new control system for the UPQC using full fuzzy logic control. Moreover, fuzzy control is used in current control instead of proportional integral controllers so that it has acceptable performance over a wide range of operating points. The novel approach of an EMS-connected UPQC activates the UPQC at the required time only into the grid. This approach has many benefits by increasing the UPQC lifetime. The effect of the proposed system on the aforementioned issues has been validated through simulation by MATLAB/Simulink. The results are compared with those obtained by conventional methods. The results verify the superior performance of the proposed UPQC to mitigate the problems of current total harmonic distortions, voltage sag, and voltage swell under different operating conditions during the monitoring period.
- 22 March 2019
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in Turkish Journal of Electrical Engineering and Computer Sciences
- Vol. 27 (2) , 1181-1197
Open AccessPower quality improvement of smart microgrids using EMS-based fuzzy controlled UPQC
The prevalent power quality problems in smart microgrids and power distribution systems are voltage sag, voltage swell, and harmonic distortion. The achievement of pure sinusoidal waveform with proper magnitude and phase is currently a great research and development concern. The aim of this paper is to evaluate and mitigate the smart microgrid harmonics, voltage sag, and voltage swell throughout a 24-h cycle, taking into consideration the variation in solar power generation due to changes in irradiation received by photovoltaic cells, the variation in wind power generation due to changes in wind speed, and the variation of linear and nonlinear load profiles during the day’s cycle. The mitigation of the power quality issues manifested in current harmonics, voltage sag, and voltage swell is achieved through the implementation of a new fully fuzzy controlled unified power quality conditioner (UPQC). It is controlled by an energy management system (EMS). This paper introduces a new control system for the UPQC using full fuzzy logic control. Moreover, fuzzy control is used in current control instead of proportional integral controllers so that it has acceptable performance over a wide range of operating points. The novel approach of an EMS-connected UPQC activates the UPQC at the required time only into the grid. This approach has many benefits by increasing the UPQC lifetime. The effect of the proposed system on the aforementioned issues has been validated through simulation by MATLAB/Simulink. The results are compared with those obtained by conventional methods. The results verify the superior performance of the proposed UPQC to mitigate the problems of current total harmonic distortions, voltage sag, and voltage swell under different operating conditions during the monitoring period.
- Open Access
- 19 April 2018
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 8 (2) , 2847-2852
Indirect 3D-Space Vector Modulation for Matrix Converter
This paper discusses the indirect space vector modulation for four-leg matrix converter. Four-leg matrix converter has been proven to be a reliable, cost-effective, and compact power electronic interface to supply unbalanced or nonlinear loads. However, the added fourth leg has shifted the inverter side modulation from simple two-dimension SVM into complex three-dimension. This paper employs a new technique to implement indirect 3D SVM in digital controllers with further simplification in the modulation process. Moreover, Simulink simulation using repetitive controller has been performed to regulate the output voltage for 400 Hz Power supplies.
- 19 April 2018
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 8 (2) , 2847-2852
Open AccessIndirect 3D-Space Vector Modulation for Matrix Converter
This paper discusses the indirect space vector modulation for four-leg matrix converter. Four-leg matrix converter has been proven to be a reliable, cost-effective, and compact power electronic interface to supply unbalanced or nonlinear loads. However, the added fourth leg has shifted the inverter side modulation from simple two-dimension SVM into complex three-dimension. This paper employs a new technique to implement indirect 3D SVM in digital controllers with further simplification in the modulation process. Moreover, Simulink simulation using repetitive controller has been performed to regulate the output voltage for 400 Hz Power supplies.
- 1 May 2017
- Published by EJournal Publishing in Journal of Clean Energy Technologies
- Vol. 5 (3) , 236-242
Outdoor Performance of Micro Scale Wind Turbine Stand alone System
- 1 May 2017
- Published by EJournal Publishing in Journal of Clean Energy Technologies
- Vol. 5 (3) , 236-242
Outdoor Performance of Micro Scale Wind Turbine Stand alone System
- 2 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 894-901
Effect of harmonics on distance relay in short and medium transmission lines
The continuous increasing in the number and the power ratings of the non-linear loads are the main sources of harmonics that affect the performance of all electrical elements. This harmonics either current or voltage harmonics have a serious effect on the quality of electricity power supply and all network elements like protection elements especially distance relays. In this paper, the effect of harmonics on distance relay is presented through a comparative study between the distance relay performance in the short and the medium models of the cable under different levels of harmonics including many components of current and voltage. This study is presented using Matlab to describe the distance relay, harmonics (current source), transmission line, fault simulation as a single line to ground fault SLG and the impedance type distance characteristic are chosen to be as the protection scheme.
- 2 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 894-901
Effect of harmonics on distance relay in short and medium transmission lines
The continuous increasing in the number and the power ratings of the non-linear loads are the main sources of harmonics that affect the performance of all electrical elements. This harmonics either current or voltage harmonics have a serious effect on the quality of electricity power supply and all network elements like protection elements especially distance relays. In this paper, the effect of harmonics on distance relay is presented through a comparative study between the distance relay performance in the short and the medium models of the cable under different levels of harmonics including many components of current and voltage. This study is presented using Matlab to describe the distance relay, harmonics (current source), transmission line, fault simulation as a single line to ground fault SLG and the impedance type distance characteristic are chosen to be as the protection scheme.