Yaqin Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yaqin Liang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Hui Li
Changzhi Coll, Dept Chem, Changzhi, Peoples R China
6 shared publicationsDong Liang
North University of China
2 shared publicationsH. Li
Department of Chemistry, Changzhi College, 046000, Changzhi, Shanxi, China
2 shared publicationsShuping Zhang
Department of Chemistry, Changzhi College, Changzhi, Shanxi, P. R. China
2 shared publicationsX. M. Mao
Department of Chemistry, Changzhi College, 046000, Changzhi, Shanxi, China
2 shared publicationsXiaoming Mao
2 shared publications
Latest Publications
- Open Access
Self-Aggregation, Antimicrobial Activity and Cytotoxicity of Ester-Bonded Gemini Quaternary Ammonium Salts: The Role of the Spacer
Five ester-bonded gemini quaternary ammonium surfactants C12-En-C12 (n = 2, 4, 6), with a flexible spacer group, and C12-Bm-C12 (m = 1, 2), with rigid benzene spacers, were synthesized via a two-step reaction and analyzed. Furthermore, the effects of the spacer structure, spacer length and polymerization degree on the self-aggregation, antimicrobial activity and cytotoxicity of C12-En-C12 and C12-Bm-C12 and their corresponding monomer N-dodecyl-N,N,N-trimethyl ammonium chloride DTAC were investigated. The results showed that C12-En-C12 and C12-Bm-C12 had markedly lower critical micellar concentration (CMC) values and lower surface tension than DTAC. Moreover, the CMC values of C12-En-C12 and C12-Bm-C12 decreased with increasing spacer length. In the case of equivalent chain length, the rigidity and steric hindrance of phenylene and 1,4-benzenediyl resulted in larger CMC values for C12-Bm-C12 than for C12-En-C12. The antibacterial ability of C12-En-C12 and C12-Bm-C12 was assessed using Escherichia coli (E. coli) and Staphylococcus albus (S. aureus) based on minimum inhibitory concentrations (MICs). Furthermore, C12-En-C12 and C12-Bm-C12 exhibited higher antimicrobial activity than DTAC and had stronger function toward S. aureus than E. coli. The antimicrobial activity was enhanced by increasing the spacer chain length and decreased with the increased rigidity of the spacers. The cytotoxic effects of C12-En-C12 and C12-Bm-C12 in cultured Hela cells were evaluated by the standard CCK8 method based on half-maximal inhibitory concentration (IC50). The cytotoxicity of C12-En-C12 and C12-Bm-C12 was significantly lower than alkanediyl-α,ω-bis(dimethyldodecylammonium) bromide surfactants and DTAC. The spacer structure and the spacer length could induce significant cytotoxic effects on Hela cells. These findings indicate that the five ester-bonded GQASs have stronger antibacterial activity and lower toxicity profile, and thus can be used in the pharmaceutical industry.
Open AccessSelf-Aggregation, Antimicrobial Activity and Cytotoxicity of Ester-Bonded Gemini Quaternary Ammonium Salts: The Role of the Spacer
Five ester-bonded gemini quaternary ammonium surfactants C12-En-C12 (n = 2, 4, 6), with a flexible spacer group, and C12-Bm-C12 (m = 1, 2), with rigid benzene spacers, were synthesized via a two-step reaction and analyzed. Furthermore, the effects of the spacer structure, spacer length and polymerization degree on the self-aggregation, antimicrobial activity and cytotoxicity of C12-En-C12 and C12-Bm-C12 and their corresponding monomer N-dodecyl-N,N,N-trimethyl ammonium chloride DTAC were investigated. The results showed that C12-En-C12 and C12-Bm-C12 had markedly lower critical micellar concentration (CMC) values and lower surface tension than DTAC. Moreover, the CMC values of C12-En-C12 and C12-Bm-C12 decreased with increasing spacer length. In the case of equivalent chain length, the rigidity and steric hindrance of phenylene and 1,4-benzenediyl resulted in larger CMC values for C12-Bm-C12 than for C12-En-C12. The antibacterial ability of C12-En-C12 and C12-Bm-C12 was assessed using Escherichia coli (E. coli) and Staphylococcus albus (S. aureus) based on minimum inhibitory concentrations (MICs). Furthermore, C12-En-C12 and C12-Bm-C12 exhibited higher antimicrobial activity than DTAC and had stronger function toward S. aureus than E. coli. The antimicrobial activity was enhanced by increasing the spacer chain length and decreased with the increased rigidity of the spacers. The cytotoxic effects of C12-En-C12 and C12-Bm-C12 in cultured Hela cells were evaluated by the standard CCK8 method based on half-maximal inhibitory concentration (IC50). The cytotoxicity of C12-En-C12 and C12-Bm-C12 was significantly lower than alkanediyl-α,ω-bis(dimethyldodecylammonium) bromide surfactants and DTAC. The spacer structure and the spacer length could induce significant cytotoxic effects on Hela cells. These findings indicate that the five ester-bonded GQASs have stronger antibacterial activity and lower toxicity profile, and thus can be used in the pharmaceutical industry.
- 3 December 2020
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 94 (12) , 2605-2613
Competitive Adsorption of Methylene Blue and Cu(II) onto Magnetic Graphene Oxide/Alginate Beads
Considering weak stability, difficult separation, poor mechanical property and thermal strength of polysaccharide materials, magnetic graphene oxide/alginate beads (mGO/CA) were synthesized for competitive adsorption of MB and Cu2+ in single and binary aqueous solution. The characteristics results of FTIR, XRD, and SEM indicated that the mGO/CA was successfully fabricated. The adsorption of MB and Cu2+ on mGO/CA was studied systematically in single and binary systems. For single system, the pH affected the adsorption of MB and Cu2+ on mGO/CA and the optimized pH value was observed at 5.0. In single and binary systems, the pseudo-second-order kinetic model and Langmuir isotherm model were found to describe the MB and Cu2+ adsorption well; the diffusion process with two stages for MB and Cu2+ can describe the adsorption process. The adsorption capacity of MB and Cu2+ in binary system was attenuated compared to that in single system. MB and Cu2+ can inhibit each other’s adsorption ability. Cu2+ had a better competitiveness than MB due to the difference in the electronic structure and the molecular size. In general, mGO/CA can be proved to be an multifunctional adsorbent to remove heavy ions and anion dyes from aqueous solution.
- 3 December 2020
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 94 (12) , 2605-2613
Competitive Adsorption of Methylene Blue and Cu(II) onto Magnetic Graphene Oxide/Alginate Beads
Considering weak stability, difficult separation, poor mechanical property and thermal strength of polysaccharide materials, magnetic graphene oxide/alginate beads (mGO/CA) were synthesized for competitive adsorption of MB and Cu2+ in single and binary aqueous solution. The characteristics results of FTIR, XRD, and SEM indicated that the mGO/CA was successfully fabricated. The adsorption of MB and Cu2+ on mGO/CA was studied systematically in single and binary systems. For single system, the pH affected the adsorption of MB and Cu2+ on mGO/CA and the optimized pH value was observed at 5.0. In single and binary systems, the pseudo-second-order kinetic model and Langmuir isotherm model were found to describe the MB and Cu2+ adsorption well; the diffusion process with two stages for MB and Cu2+ can describe the adsorption process. The adsorption capacity of MB and Cu2+ in binary system was attenuated compared to that in single system. MB and Cu2+ can inhibit each other’s adsorption ability. Cu2+ had a better competitiveness than MB due to the difference in the electronic structure and the molecular size. In general, mGO/CA can be proved to be an multifunctional adsorbent to remove heavy ions and anion dyes from aqueous solution.
- Open Access
- 1 October 2020
- Published by Elsevier in Desalination and Water Treatment
- Vol. 202, 295-305
Optimization of TOC removal from coal gasification wastewater by novel Fe/C micro-electrolysis fillers containing MnO2 using response surface methodology
- 1 October 2020
- Published by Elsevier in Desalination and Water Treatment
- Vol. 202, 295-305
Open AccessOptimization of TOC removal from coal gasification wastewater by novel Fe/C micro-electrolysis fillers containing MnO2 using response surface methodology
- 1 April 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 280, 319-326
Synthesis and physicochemical properties of ester-bonded gemini pyrrolidinium surfactants and a comparison with single-tailed amphiphiles
- 1 April 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 280, 319-326
Synthesis and physicochemical properties of ester-bonded gemini pyrrolidinium surfactants and a comparison with single-tailed amphiphiles
- 1 March 2019
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 41 (2) , 257-266
Solubilization of polycyclic aromatic hydrocarbons by novel ester-bonded Gemini prolinol-based surfactant and its binary mixtures with conventional surfactants
Aqueous interactions of a novel ester-bonded Gemini prolinol-based surfactant, 2,2′-((adipoylbis(oxy))bis(methylene))bis(1-dodecyl-1-methylpyrrolidin-1-ium) bromide C12-6-C12PB, with dodecyl sodium sulfate (SDS), dodecyl trimethyl ammonium bromide (DTAB), tetradecyl trimethyl ammonium bromide (TTAB), or cetyltrimethyl ammonium bromide (CTAB) were studied using conductomeric measurement. The experimental critical micelle concentration (CMC) was lower than the ideal CMC, and the negative interaction parameters indicate that there is a synergistic interaction between the surfactants in the binary solution. The solubilization capacities of single and binary surfactant systems towards polycyclic aromatic hydrocarbons (PAHs) (i.e., naphthalene, anthracene, and pyrene) were evaluated and are discussed in terms of the molar solubilization ratio (MSR), micelle-water partition coefficient (Km), and free energy of solubilization ( ). C12-6-C12PB and SDS respectively had the minimum and maximum MSR when presented individually in the solution. The MSR values in the binary system are greater than those in the single surfactant system, and this indicates that synergism in a mixed system enhances PAH solubility. With a molar ratio of 0.7:0.3, C12-6-C12PB/SDS had a relatively greater solubilization capacity for PAHs because of large aggregates. The negative value of indicates the spontaneity of the solubilization process.- 1 March 2019
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 41 (2) , 257-266
Solubilization of polycyclic aromatic hydrocarbons by novel ester-bonded Gemini prolinol-based surfactant and its binary mixtures with conventional surfactants
Aqueous interactions of a novel ester-bonded Gemini prolinol-based surfactant, 2,2′-((adipoylbis(oxy))bis(methylene))bis(1-dodecyl-1-methylpyrrolidin-1-ium) bromide C12-6-C12PB, with dodecyl sodium sulfate (SDS), dodecyl trimethyl ammonium bromide (DTAB), tetradecyl trimethyl ammonium bromide (TTAB), or cetyltrimethyl ammonium bromide (CTAB) were studied using conductomeric measurement. The experimental critical micelle concentration (CMC) was lower than the ideal CMC, and the negative interaction parameters indicate that there is a synergistic interaction between the surfactants in the binary solution. The solubilization capacities of single and binary surfactant systems towards polycyclic aromatic hydrocarbons (PAHs) (i.e., naphthalene, anthracene, and pyrene) were evaluated and are discussed in terms of the molar solubilization ratio (MSR), micelle-water partition coefficient (Km), and free energy of solubilization ( ). C12-6-C12PB and SDS respectively had the minimum and maximum MSR when presented individually in the solution. The MSR values in the binary system are greater than those in the single surfactant system, and this indicates that synergism in a mixed system enhances PAH solubility. With a molar ratio of 0.7:0.3, C12-6-C12PB/SDS had a relatively greater solubilization capacity for PAHs because of large aggregates. The negative value of indicates the spontaneity of the solubilization process.- 1 December 2018
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 92 (13) , 2802-2810
Trimeric Surfactant Modified Montmorillonite Immobilized in Alginate Beads: An Efficient Adsorbent for Removal of Cu2+ and Methyl Orange from Aqueous Solution
Trimeric surfactant modified montmorillonite immobilized in alginate beads (CA/3RenQ-Mt) sorbent was synthesized to simultaneously remove Cu2+and methyl orange (MO) from aqueous solution....
- 1 December 2018
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 92 (13) , 2802-2810
Trimeric Surfactant Modified Montmorillonite Immobilized in Alginate Beads: An Efficient Adsorbent for Removal of Cu2+ and Methyl Orange from Aqueous Solution
Trimeric surfactant modified montmorillonite immobilized in alginate beads (CA/3RenQ-Mt) sorbent was synthesized to simultaneously remove Cu2+and methyl orange (MO) from aqueous solution....
- 20 April 2017
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 39 (2) , 220-226
L-cysteine-based trimeric surfactants with hexahydro-1,3,5-triazine as the central core: Synthesis and self-assembly study
Novel trimeric surfactants consisting of three units of sodium N-acyl-L-cysteine linked with hexahydro-1,3,5-triazine as the central core ((CnCy)3Na3, where n represented alkyl chain carbon number of 8, 10, and 12) were synthesized. Their conjugated acids were analyzed using FTIR, NMR, and ESI-MS to elucidate their chemical structures. The surface activity properties of (CnCy)3Na3 were determined using surface tension and electrical conductivity measurements. It was found that (C12Cy)3Na3 had a critical aggregation concentration (CAC) two orders of magnitude lower than that of the corresponding monomeric surfactant sodium N-lauroyl-L-cysteine (C12CyNa). The value of the minimum surface area per molecule (Amin) of (C12Cy)3Na3 was almost three times greater than that of C12CyNa due to the increase in the degree of oligomerization. With the alkyl chain length increasing from 8 to 12, the CAC values decreased, and the values of the surface tension at CAC (γCAC) and the efficiency of the surface adsorption (pC20) increased. Furthermore, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to evaluate the size and morphology of the aggregates at 10CAC. The results indicate that (CnCy)3Na3 can spontaneously self-assemble into spherical or ellipsoid aggregates, and the surfactants with longer chain length can form larger aggregates due to greater hydrophobic interactions.
- 20 April 2017
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 39 (2) , 220-226
L-cysteine-based trimeric surfactants with hexahydro-1,3,5-triazine as the central core: Synthesis and self-assembly study
Novel trimeric surfactants consisting of three units of sodium N-acyl-L-cysteine linked with hexahydro-1,3,5-triazine as the central core ((CnCy)3Na3, where n represented alkyl chain carbon number of 8, 10, and 12) were synthesized. Their conjugated acids were analyzed using FTIR, NMR, and ESI-MS to elucidate their chemical structures. The surface activity properties of (CnCy)3Na3 were determined using surface tension and electrical conductivity measurements. It was found that (C12Cy)3Na3 had a critical aggregation concentration (CAC) two orders of magnitude lower than that of the corresponding monomeric surfactant sodium N-lauroyl-L-cysteine (C12CyNa). The value of the minimum surface area per molecule (Amin) of (C12Cy)3Na3 was almost three times greater than that of C12CyNa due to the increase in the degree of oligomerization. With the alkyl chain length increasing from 8 to 12, the CAC values decreased, and the values of the surface tension at CAC (γCAC) and the efficiency of the surface adsorption (pC20) increased. Furthermore, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to evaluate the size and morphology of the aggregates at 10CAC. The results indicate that (CnCy)3Na3 can spontaneously self-assemble into spherical or ellipsoid aggregates, and the surfactants with longer chain length can form larger aggregates due to greater hydrophobic interactions.
- 1 February 2017
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 227, 139-146
A comparison of trimeric surfactant intercalated montmorillonite with its gemini modified one: Characterization and application in methyl orange removal
- 1 February 2017
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 227, 139-146
A comparison of trimeric surfactant intercalated montmorillonite with its gemini modified one: Characterization and application in methyl orange removal
- 6 May 2015
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 293 (8) , 2209-2216
Lysine-based oligomeric surfactants with cyanuric chloride: synthesis and micellization properties
- 6 May 2015
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 293 (8) , 2209-2216
Lysine-based oligomeric surfactants with cyanuric chloride: synthesis and micellization properties
- 3 June 2014
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 36 (6) , 831-837
Synthesis and Physicochemical Characterization of Chiral Pyrrolidinium-Based Surfactants
Chiral surfactants, (2S)-2-(hydroxymethyl)-1-methyl-1-alkyl pyrrolidinium bromides (L-CnPB, n = 12, 14, 16), were synthesized by the reaction of N-methyl-L-prolinol with long-chain alkyl bromides. The structures were characterized by IR spectra, 1H NMR, ESI-MS, and elemental analysis. Their surface activity, thermodynamic properties, and aggregation behavior were investigated by surface tension, electrical conductivity, and steady-state fluorescence. It was found that L-CnPB have lower critical micelle concentration (CMC) and surface tension at CMC (γcmc) in comparison with N,N,N-trimethyl-1-alkyl ammonium bromide (CnTAB) and N-alkyl-N-methyl pyrrolidinium bromide (CnMP). The CMC and the minimum average area per surfactant molecule (Amin) values of L-CnPB decreased with the increase in the alkyl chain length from 12 to 16. A series of thermodynamic parameters ( , and ) of micellization obtained from electrical conductivity indicated that micellization is a spontaneous and entropy-driven process. Furthermore, the micelle aggregation number (Nagg) of L-CnPB obtained from steady-state fluorescence quenching was found to be 42, 48, and 53 for L-C12PB, L-C14PB, and L-C16PB, respectively.
- 3 June 2014
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 36 (6) , 831-837
Synthesis and Physicochemical Characterization of Chiral Pyrrolidinium-Based Surfactants
Chiral surfactants, (2S)-2-(hydroxymethyl)-1-methyl-1-alkyl pyrrolidinium bromides (L-CnPB, n = 12, 14, 16), were synthesized by the reaction of N-methyl-L-prolinol with long-chain alkyl bromides. The structures were characterized by IR spectra, 1H NMR, ESI-MS, and elemental analysis. Their surface activity, thermodynamic properties, and aggregation behavior were investigated by surface tension, electrical conductivity, and steady-state fluorescence. It was found that L-CnPB have lower critical micelle concentration (CMC) and surface tension at CMC (γcmc) in comparison with N,N,N-trimethyl-1-alkyl ammonium bromide (CnTAB) and N-alkyl-N-methyl pyrrolidinium bromide (CnMP). The CMC and the minimum average area per surfactant molecule (Amin) values of L-CnPB decreased with the increase in the alkyl chain length from 12 to 16. A series of thermodynamic parameters ( , and ) of micellization obtained from electrical conductivity indicated that micellization is a spontaneous and entropy-driven process. Furthermore, the micelle aggregation number (Nagg) of L-CnPB obtained from steady-state fluorescence quenching was found to be 42, 48, and 53 for L-C12PB, L-C14PB, and L-C16PB, respectively.