Paul Bardos has a total of 121 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Three Qualitative Sustainability Assessments in Three Countries Comparing the Reuse of Brownfield Land for Nettle Fiber Production With Alternative Land Management Scenarios

    by Paul Bardos, Jörg Müssig, Jonas‐Rumi Bauman, Ricarda Ditting, David Cazaux, Hans‐Jörg Gusovius, Stefano Amaducci, Andrea Ferrarini, Pierre Matz, Michel Chalot

    The increasing demand for bio‐based fibers as substitutes for synthetic materials raises concerns about land use competition with food production. One proposed solution is the cultivation of non‐food fiber crops on marginal or brownfield land. This study evaluates the sustainability of cultivating stinging nettle ( Urtica dioica L.) for fiber production under poplar ( Populus spp.) as a multifunctional land management strategy on brownfield and industrially impacted sites. Three qualitative sustainability assessments were conducted at case study sites in France (Saint‐Symphorien‐sur‐Saône), Italy (Tavazzano), and Germany (Bernburg), comparing nettle–poplar systems with alternative land management scenarios, including ecological succession (“no change”), conventional agriculture, and photovoltaic (PV) energy production. The assessments were undertaken ex ante between 2020 and 2022 in accordance with ISO 18504:2017 on sustainable remediation and applied the Sustainable Remediation Forum–UK (SuRF‐UK) Tier 1 qualitative framework. Environmental, economic, and social indicators were selected and scoped on a site‐specific basis using the SuRF‐UK indicator checklist, followed by comparative ranking of options supported by documented lines of evidence. Stakeholder engagement, involving site owners, technical experts, regulators, local authorities, and community representatives, was integrated into the assessment process and used to refine indicator selection and rankings. Across all three sites, nettle cultivation beneath poplar consistently achieved the most balanced sustainability performance overall, ranking highest for the environmental dimension in each case. Key environmental benefits included improved soil functionality, reduced erosion risk, enhanced ecological value, and productive reuse of marginal land. Economic performance of the nettle–poplar option was competitive but context dependent, generally ranking equal to or below PV‐based options for direct financial returns, while outperforming alternatives in employment, innovation potential, and wider induced benefits. Social outcomes varied by site, with ecological succession often favored where recreational or cultural values dominated, and novel bio‐based systems scoring lower on uncertainty due to limited operational track records. The results demonstrate that nettle–poplar systems represent a robust, nature‐based, and multifunctional option for the sustainable management of brownfield land, offering strong environmental performance and acceptable economic and social outcomes. The study highlights the value of qualitative, stakeholder‐informed sustainability assessment in supporting land‐use decision‐making where quantitative data are limited or highly site‐specific.


  • Open Access

    Low input remediation techniques for contaminated site management

    by Paul Bardos, Jinyu Lai, Lisa Pizzol, Antonio Sellitri, Nazaré Couto, Virginie Derycke, Dominique Guyonnet, Timothy M. Vogel, Jurate Kumpiene, Andrew Cundy

    Low-input remediation techniques represent a family of approaches characterised by lower energy and resource demands, often leveraging natural processes, renewable resources, or energy sources.


  • Survey of the Socioeconomic and Environmental Impact of Wetland+

    by Pavla Svermova, Miroslav Cernik, Paul Bardos, Jitka Buresova, Maria Bałazińska


  • Open Access

    Life Cycle Assessment of an Innovative Combined Treatment and Constructed Wetland Technology for the Treatment of Hexachlorocyclohexane-Contaminated Drainage Water in Hajek in the Czech Republic

    by Maria Bałazińska, Paul Bardos, Grzegorz Gzyl, Vojtech Antos, Anna Skalny, Tomas Lederer

    The paper presents the results of an LCA analysis of the “Wetland+®” technology compared to conventional wastewater treatment technology. Wastewater contaminated with pesticide production residues from lindane was treated. The analysis is based on data from a full-scale Wetland+® installation located in Hajek, the Czech Republic. Conventional wastewater treatment technology was selected as a comparator. For the comparative system, data for the LCA came from design calculations assuming the location of such a system in the same place and function as the Wetland+® technology implemented. The LCA analysis was carried out using system boundaries covering the stages of construction and operation of the systems. The results indicate that with the Wetland+® technology, a system’s overall environment burdens are >11 times less than that of conventional wastewater treatment technology.


  • Open Access

    How Can Hybrid Materials Enable a Circular Economy?

    by Stanisław Wacławek, Mateusz Fijalkowski, Paul Bardos, Jan Kočí, Sebastian Scholz, Patrick Hirsch, Gerhard Domann, Miroslav Černík

    Climate change, critical material shortages and environmental degradation pose an existential threat to the entire world. Immediate action is needed to transform the global economy towards a more circular economy with less intensive use of fossil energy and limited resources and more use of recyclable materials. Recyclable materials and manufacturing techniques will play a critical role in this transformation. Substantial advancements will be needed to achieve a more intelligent materials design to enhance both functionality and enhanced sustainability. The development of hybrid materials combining functionality at macro and nano scales based on organic and inorganic compounds, that are entirely recyclable could be used for tremendous applications. In this mini-review, we provide the reader with recent innovations on hybrid materials for application in water, energy and raw materials sectors. The topic is very modern and after its deep study we propose a creation an international research centre, that would combine the development of hybrid materials with green manufacturing. We have highlighted a framework that would comprise critical themes of the initial research needed. Such a centre would promote sustainable production of materials through intelligent hybridisation and eco-efficient, digital manufacturing and enable a circular economy in the long term. Such activities are strongly supported by current environmental and economical initiatives, like the Green Deal, REPower EU and digital EU initiatives.


  • Open Access

    Nettle, a Long-Known Fiber Plant with New Perspectives

    by Chloé Viotti, Katharina Albrecht, Stefano Amaducci, Paul Bardos, Coralie Bertheau, Damien Blaudez, Lea Bothe, David Cazaux, Andrea Ferrarini, Jason Govilas, et al.

    The stinging nettle Urticadioica L. is a perennial crop with low fertilizer and pesticide requirements, well adapted to a wide range of environmental conditions. It has been successfully grown in most European climatic zones while also promoting local flora and fauna diversity. The cultivation of nettle could help meet the strong increase in demand for raw materials based on plant fibers as a substitute for artificial fibers in sectors as diverse as the textile and automotive industries. In the present review, we present a historical perspective of selection, harvest, and fiber processing features where the state of the art of nettle varietal selection is detailed. A synthesis of the general knowledge about its biology, adaptability, and genetics constituents, highlighting gaps in our current knowledge on interactions with other organisms, is provided. We further addressed cultivation and processing features, putting a special emphasis on harvesting systems and fiber extraction processes to improve fiber yield and quality. Various uses in industrial processes and notably for the restoration of marginal lands and avenues of future research on this high-value multi-use plant for the global fiber market are described.


  • Open Access

    A Questionnaire Survey on Contaminated Site Regulators’ View of Implementing Green and Sustainable Remediation in China

    by Xueting Shao, Feiyu Wang, R. Paul Bardos, Yimin Sang, Yong Ren, Mingyu Qin, Hairong Wang

    Government contaminated site regulators, as policy executors and makers, have a profound impact on the development of green and sustainable remediation (GSR), but their cognitive level of GSR has not been well-studied. China has some experience in the management of contaminated sites and has the foundation to promote GSR. This study was conducted in the form of a questionnaire to investigate the understanding of GSR among Chinese site regulators at different levels. The study found that there was still a lot of resistance to promoting GSR in China. Firstly, even though the regulators thought GSR was necessary in China, most of them did not know GSR very well or lacked practical experience. Secondly, existing national and provincial policy standards did not have a good balance between the environmental, social and economic aspects, but gave priority to the environmental factors. Thirdly, the lack of standard and regulatory requirements was the most significant barrier to the implementation of GSR. The results of the survey can provide a reference for China or other developing countries to implement GSR. Practitioners should provide more knowledge and cases for regulators, supplement national policies or improve the provincial and municipal policy system.


  • Open Access

    Sustainability assessment framework and indicators developed by SuRF‐UK for land remediation option appraisal

    by R. Paul Bardos, Hayley F. Thomas, Jonathan W. N. Smith, Nicola D. Harries, Frank Evans, Richard Boyle, Trevor Howard, Richard Lewis, Alan O. Thomas, Vivien L. Dent, et al.

    The scale of land‐contamination problems, and of the responses to them, makes achieving sustainability in contaminated land remediation an important objective. The Sustainable Remediation Forum in the UK (SuRF‐UK) was established in 2007 to support more sustainable remediation practices in the UK. The prevailing international consensus is that risk assessment is the most rational approach for determining remediation needs and urgency. Sustainability in this context is related to the effective delivery of whatever risk management is necessary to protect human health or the wider environment. SuRF‐UK suggests that decisions made at the project planning stage, and also in the choice of remediation approach used to reach particular objectives decided upon, are both opportunities for sustainability gain. In 2011, SuRF‐UK issued a set of wide‐ranging indicators to support sustainability assessments made during project planning and remediation option appraisal. This advice was reviewed over 2018–2020 and new guidance on process and indicators has been released. Within this guidance, SuRF‐UK has provided a checklist of possible sustainability indicators/criteria that can be used to benchmark the scope of sustainability assessment for remediation projects. These indicators are divided into 15 overarching (“headline”) categories, divided in a balanced way across the three elements of sustainability: Environmental (emissions to air, soil and ground conditions, groundwater and surface water, ecology, and natural resources and waste); social (human health and safety, ethics and equity, neighborhoods and locality, communities and community involvement, and uncertainty and evidence); and economic (direct economic costs and benefits, indirect economic costs and benefits, employment and employment capital, induced economic costs and benefits, and project lifespan and flexibility). The majority of this study explains these categories and their various considerations in more depth and provides the supporting rationale that led to their inclusion in the revised SuRF‐UK guidance.