MEMohammad Javad Emadi

Mohammad Javad Emadi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mohammad Javad Emadi has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    On Age of Information and Energy‐Transfer in a STAR‐RIS‐Assisted System

    by Mohammad Reza Kavianinia, Mohammad Mehdi Setoode, Mohammad Javad Emadi

    Battery‐limited devices and time‐sensitive applications are considered as key players in forthcoming wireless sensor network. So, the main goal of the network is two‐fold; charge battery‐limited devices, and provide status updates to users where information‐freshness matters. In this paper, a multi‐antenna base station (BS) in assistance of simultaneously‐transmitting‐and‐reflecting reconfigurable intelligent surface (STAR‐RIS) transmits power to energy harvesting (EH) devices while controlling status update performance at information users by analysing age of information (AoI) metric. Therefore, we derive a scheduling policy at BS, and analyse joint transmit beamforming and amplitude‐phase optimization at BS and STAR‐RIS, respectively, to reduce average sum‐AoI for the time‐sensitive information users while satisfying minimum required energy at EH users. Moreover, two different energy‐splitting and mode‐switching policies at STAR‐RIS are studied. Then, by use of an alternating optimization algorithm, the optimization problem is studied and non‐convexity of the problem is tackled by using the successive convex approximation technique. Through numerical results, AoI‐metric and EH requirements of the network are analysed versus different parameters such as number of antennas at BS, size of STAR‐RIS, and transmitted power to highlight how we can improve two‐fold performance of the system by utilizing STAR‐RIS compared to the conventional RIS structure.


  • Open Access

    An Entropy‐Based Hybrid Conjugate Gradient Scheme for Locating High Impedance Faults in DC Microgrids

    by Reza Rahmani, Seyed Hossein Hesamedin Sadeghi, Hossein Askarian Abyaneh, Mohammad Javad Emadi

    This Paper proposes an efficient inversion scheme based on Shannon entropy to determine the location of high impedance faults (HIFs) in DC microgrids in the presence of noise. The proposed scheme adopts a phenomenological approach that uses a physical model to iteratively solve the inverse problem. The problem is posed as an optimisation problem that determines the most likely location of a fault by minimising an appropriate objective function; it denotes the disparity between the entropy of the current waveforms observed by the protection relays at the time of fault detection and their model‐predicted counterparts. A hybrid optimisation technique based on the conjugate gradient method is adopted in the inversion process that secures a robust and fast convergence of the proposed method. The primary advantage of this scheme is its accuracy in noisy environments with no limitation on the type of fault and value of fault impedance. To examine the performance of the proposed scheme, a mesh‐type DC microgrid is simulated and the results are compared with one of the state of‐the‐art methods. It has been shown that the proposed method can accurately locate HIFs with fault resistance as high as 100 Ω and signal‐to‐noise ratio as low as 20 dB.


  • Open Access

    On weighted sum‐rate maximization of full‐duplex systems in presence of STAR‐RIS

    by Mohammad Reza Kavianinia, Mohammad Javad Emadi, Mohammad Ali Sedaghat

    Reflecting intelligent surface (RIS) is one of the key enabling technologies for beyond fifth generation wireless networks to further improve coverage, spectral‐ and energy‐efficiency of wireless networks. Recently, a novel simultaneous transmission and reflection RIS (STAR‐RIS) technology is introduced which enables more degrees‐of‐freedom in simultaneously serving users in reflection and transmission regions of RIS. This paper investigates a STAR‐RIS assisted two‐user full‐duplex communication system, wherein multi‐antenna base station (BS) and single‐antenna users are subject to maximum power constraints. Firstly, weighted sum rates are computed for three well‐known STAR‐RIS protocols, e.g. energy splitting, mode selection, and time splitting. Then, for each of the cases, weighted sum rate optimization problem is investigated to find optimal resource allocations, i.e. base station's precoding and combining matrices, coefficients of STAR‐RIS, and power allocations. The optimization problem is transferred into multiple convex sub‐problems using equivalent weighted minimum mean‐square‐error forms. Also, by use of the successive convex approximation method, tunable parameters of the STAR‐RIS are optimized. Although the original problem is a non‐convex one, proposed iterative alternating technique achieves an acceptable sub‐optimal performance. Finally, performance of the system is analysed and compared to some baselines to highlight superiority of the STAR‐RIS compared to the conventional RIS schemes.


  • A Novel Nonlinear Power Receiver Model for Resource Allocation in MIMO SWIPT Based on Input Power and Operating Frequency of Rectifier's Entropy

    by Mehdi Shirichian, Gholamreza Moradi, Reza Sarraf Shirazi, Mohammad Javad Emadi

    One of the main challenges to develop the Internet of Things (IoT), mobile communication and unmanned aerial vehicle (UAV) devices is the limitation of the power supply. As a promising solution, simultaneous wireless information and power transfer (SWIPT) concept has been introduced while the performance highly depends on modeling the nonlinear characteristics of the receiver. In this article, a novel nonlinear model is presented for the DC output power of the rectifier as a function of the input power and the operating frequency. The proposed model is named Entropy model since the entropy of the input power and the operating frequency of the rectifier serve as indices of the rectifier's DC output power. Also, it can be used to compare the shape of various rectifiers' conversion efficiency. In addition, the proposed model is applicable to different operating frequency bands and works for a wide range of input power. The similarity of the proposed model with the measured data is more than 98%. To maximize the total received power over the frequency band by utilizing the proposed model, we solve a non-concave optimization problem subject to minimum required signal-to-interference-plusnoise ratios (SINRs) for three different receiver structures, i.e. power splitting, time switching and separated receivers. For all receivers, the non-concave optimization problem is transformed into a tractable form. Moreover, the ratio of the power splitter in the PS is optimized during solving resource allocation problems considering its effect on the total received power and SINR. The results demonstrate that resource allocation can significantly enhance the performance by use of the proposed nonlinear model rather than the conventional linear and nonlinear ones.


  • Open Access

    HCM‐based indoor optical wireless communications: Timing and data recovery

    by Masoud Johar, Alireza Salehiyan, Mohammad Javad Emadi, S. Alireza Nezamalhosseini

    Light‐fidelity (Li‐Fi) is a promising solution to provide high‐rate, secure, and green communications to be used in the next generation of wireless networks. Since visible or infrared (IR) light‐emitting diodes (LEDs) are used as the optical source and have a non‐linear transfer function, the transmitted modulated signal can be distorted if the signal has a high peak‐to‐average power ratio (PAPR). Recently, a new modulation scheme called Hadamard‐coded modulation (HCM) is proposed which has no PAPR concern since it produces symbols with discrete levels. In the HCM technique, the symbol levels can be created using multiple LEDs. Therefore, each LED operates in its linear region and just switches on or off. A low‐complexity transceiver architecture for the HCM‐based communication links is proposed and a complete synchronisation procedure based on the spread‐spectrum techniques is presented. Finally, the bit error rate of the system is evaluated by Monte Carlo simulations, and effects of system parameters such as preamble length, fall and rise time of optical devices, and timing jitter on the bit error rate of the link are discussed.

  • Open Access

    Performance analysis of uplink optical wireless communications in the presence of a simultaneously transmitting and reflecting reconfigurable intelligent surface

    by Alireza Salehiyan, Mohammad Javad Emadi

    Recently, reconfigurable intelligent surface (RIS) has gained research and development interests in modifying wireless channel characteristics in order to improve the performance of wireless communications, especially when the quality of the line‐of‐sight channel is not that good. In this work, for the first time in the literature, we have used simultaneously transmitting and reflecting RIS (STAR‐RIS) in a non‐orthogonal multiple‐access visible light communication system to improve the performance of the system. Achievable rates of the users are derived for two data recovery schemes, single‐user detection (SUD) and successive interference cancellation (SIC). Then, the sum‐rate optimisation problem is formulated for two operating modes of STAR‐RIS, namely energy‐splitting and mode‐switching cases. Moreover, a sequential parametric convex approximation method is used to solve the sum‐rate optimisation problems. The authors have also compared energy‐splitting and mode‐switching cases and showed that these two modes have the same performance. Finally, numerical results for SUD and SIC schemes and two benchmarking schemes, time‐sharing and max‐min fairness, are presented, and spectral‐ and energy‐efficiency, number of STAR‐RIS elements, the position of users, and access point are discussed.


  • Open Access

    Fairness analysis of indoor multi‐user communications through steerable IR‐beam

    by Hamed Masoumi, Masoud Johar, Alireza Salehiyan, Mohammad Javad Emadi

    Downlink data transmission of multi‐user indoor optical wireless communications and its corresponding fairness analysis is studied by the authors. It is assumed that access points (APs) may use infrared beam (IR‐beam) laser or light emitting diodes (LEDs) for data transmissions. For the case of APs with IR‐beams, since the bandwidth of the transmitted optical signal can be very large than that of the LED’s, a typical time‐division multiple access (TDMA) scheme is utilised to serve multiple users and the respective achievable rates are derived. Then, for a general fairness‐scheduling utility function with the capability of adjusting the degree of fairness known as α ‐proportional fairness, optimal time‐sharing coefficients are analytically derived in closed‐forms. To compare the performance of the IR‐based communications for the LED‐based APs, two non‐cooperative and cooperative data transmission schemes are also studied and the corresponding achievable rates are presented based on the classical superposition coding. Finally, to compare the performance of the two types of APs, per user data rate of the proposed systems are compared through numerical results for different scenarios to highlight advantages and drawbacks of the two types of APs. Also, by considering the Jain's index as a fairness metric, the impact of the system parameters on the fairness is discussed through numerical results.


  • High-Speed Trains Access Connectivity Through RIS-Assisted FSO Communications

    by Pouya Agheli, Hamzeh Beyranvand, Mohammad Javad Emadi

    Free-space optic (FSO) is a promising solution to provide broadband Internet access for high-speed trains (HSTs). Besides, reconfigurable intelligent surfaces (RIS) are considered as hardware technology to improve the performance of optical wireless communication systems. In this paper, we propose a RIS-assisted FSO system to provide access connectivity for HTSs, as an upgrade for the existing direct and relay-assisted FSO access setups. Our motivation is mainly based on well-proven results indicating that a RIS-assisted optical wireless system, with a large enough number of RIS elements, outperforms a relay-assisted one thanks to its programmable structure. We firstly compute the statistical expressions of the considered RIS-assisted FSO channels under weak and moderate-to-strong fading conditions. Then, the network's average signal-to-noise ratio and outage probability are formulated based on the assumed fading conditions, and for two fixed- and dynamic-oriented RIS coverage scenarios. Our results reveal that the proposed access network offers up to around 63% higher data rates and 446% wider coverage area for each FSO base station (FSO-BS) compared to those of the relay-assisted one. The increase of coverage area reduces up to 98% of the number of required FSO-BSs for a given distance, which results in fewer handover processes compared to the alternative setups. Finally, the results are verified through Monte-Carlo simulations.


  • Open Access

    Coexistence of D2D Communications and Cell-Free Massive MIMO Systems With Low Resolution ADC for Improved Throughput in Beyond-5G Networks

    by Hamed Masoumi, Mohammad Javad Emadi, Stefano Buzzi

    In this paper, uplink transmission of a cell-free massive multiple-input multiple-output (CF-mMIMO) system coexisting with device-to-device (D2D) communication links is investigated, under the assumption that access points (APs) are equipped with low-resolution analog-to-digital converters (ADCs). Lower bounds of achievable rates for both D2D users (DUEs) and CF-mMIMO users (CFUEs) are derived in closed-form, with perfect and imperfect channel state information. Next, in order to reduce pilot contamination, greedy and graph coloring-based pilot allocation algorithms are proposed and analyzed for the considered scenario. Furthermore, to control interference and improve the performance, two power control strategies are designed and their complexity and convergence are also discussed. The first power control strategy aims at maximizing CFUEs' sum spectral efficiency (SE) subject to quality of service constraints on DUEs, while the second one maximizes the weighted product of CFUEs' and DUEs' signal-to-interference-plus-noise-ratios (SINRs). Numerical results show that the proposed pilot and power allocations bring a considerable improvement to the network SE. Also, it is revealed that the activation of D2D links has a positive effect on the system throughput, i.e. the network offloading ensured by the D2D links overcomes the increased interference brought by D2D communications.