Daniel Afonso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel Afonso has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Ricardo J. Alves de Sousa
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, Campus Universitário de Santiago, University of Aveiro, 3810-193 Aveiro, Portugal
20 shared publications - Ricardo Torcato
University of Aveiro
9 shared publications - Jorge A. Fernandes Ferreira
Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
4 shared publications Liliana Pires
University of Aveiro
4 shared publicationsRicardo Torcato
University of Aveiro
4 shared publications- Liliana Pires
University of Aveiro
3 shared publications
Latest Publications
- Open Access
- 3 February 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (3) , 2991-3008
Toolpath planning for laser metal deposition: adaptive strategy for repairing complex surface damages
Laser Metal Deposition is a promising solution for restoring high-value metallic components, but repair operations still lack deposition strategies that can reliably handle irregular, curved, or steep damage profiles. Existing toolpaths are largely adapted from part-fabrication contexts, offering limited control over wall support, curvature alignment, or geometric variability. This work proposes a repair-oriented framework combining damage extraction, boundary reconstruction, and a Support-Oriented Wall Offset (SOWO) strategy. SOWO generates curvature-aware offset paths that initiate deposition at the damaged wall, promoting early support and stable propagation. Six strategies, Raster, Zig–Zag, Contour, Spiral, Hybrid, and SOWO, were evaluated through geometry-driven simulations, parameter sensitivity tests, and thermo-mechanical analyses. Results show that SOWO provides the most balanced performance across coverage, wall engagement, boundary fidelity, and supported deposition, while maintaining continuous motion and adapting to diverse geometries. All validation is simulation-based under identical conditions, enabling fair comparison. The study contributes a generalizable assessment framework and a geometry-aware trajectory that enhances stability in non-planar repair scenarios.
- 3 February 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (3) , 2991-3008
Open AccessToolpath planning for laser metal deposition: adaptive strategy for repairing complex surface damages
Laser Metal Deposition is a promising solution for restoring high-value metallic components, but repair operations still lack deposition strategies that can reliably handle irregular, curved, or steep damage profiles. Existing toolpaths are largely adapted from part-fabrication contexts, offering limited control over wall support, curvature alignment, or geometric variability. This work proposes a repair-oriented framework combining damage extraction, boundary reconstruction, and a Support-Oriented Wall Offset (SOWO) strategy. SOWO generates curvature-aware offset paths that initiate deposition at the damaged wall, promoting early support and stable propagation. Six strategies, Raster, Zig–Zag, Contour, Spiral, Hybrid, and SOWO, were evaluated through geometry-driven simulations, parameter sensitivity tests, and thermo-mechanical analyses. Results show that SOWO provides the most balanced performance across coverage, wall engagement, boundary fidelity, and supported deposition, while maintaining continuous motion and adapting to diverse geometries. All validation is simulation-based under identical conditions, enabling fair comparison. The study contributes a generalizable assessment framework and a geometry-aware trajectory that enhances stability in non-planar repair scenarios.
- Open Access
Directed Energy Deposition: A Scientometric Study and Its Practical Implications
Directed Energy Deposition is an additive manufacturing subgroup that uses a laser beam to melt the wire or powder to create a melt pool. In the current study, a scientometric analysis has been carried out to analyze the contribution of countries, publication type analysis, distribution of publications over the years, keywords analysis, author analysis, cited journal, categories, institutes of publication, and report the practical implications. Firstly, the database was extracted from the Web of Science and then post-processed with CiteSpace 6.2.R4 and VOSviewer 1.6.20 software. Afterward, the associated results had been extracted and reported. It was found that China is the leader according to publication, followed by the USA and Germany, which mostly published their achievements in article and proceeding paper formats, which are increasing annually. According to the keywords, additive manufacturing, Laser Metal Deposition, and fabrication are the most commonly used. Based on the CiteSapce and VOSviewer results, Lin, Xin and Huang, Weidong are the authors with the highest publication rates. In addition, Additive Manufacturing, Materials & Design, and Materials Science and Engineering: A are the most cited journals, and regarding the categories, materials science, multidisciplinary, applied physics, and manufacturing engineering are the most commonly used DED processes. Northwestern Polytechnical University, Fraunhofer Gesellschaft, and the United States Department of Energy (DOE) have performed the most research in the field of DED.
Open AccessDirected Energy Deposition: A Scientometric Study and Its Practical Implications
Directed Energy Deposition is an additive manufacturing subgroup that uses a laser beam to melt the wire or powder to create a melt pool. In the current study, a scientometric analysis has been carried out to analyze the contribution of countries, publication type analysis, distribution of publications over the years, keywords analysis, author analysis, cited journal, categories, institutes of publication, and report the practical implications. Firstly, the database was extracted from the Web of Science and then post-processed with CiteSpace 6.2.R4 and VOSviewer 1.6.20 software. Afterward, the associated results had been extracted and reported. It was found that China is the leader according to publication, followed by the USA and Germany, which mostly published their achievements in article and proceeding paper formats, which are increasing annually. According to the keywords, additive manufacturing, Laser Metal Deposition, and fabrication are the most commonly used. Based on the CiteSapce and VOSviewer results, Lin, Xin and Huang, Weidong are the authors with the highest publication rates. In addition, Additive Manufacturing, Materials & Design, and Materials Science and Engineering: A are the most cited journals, and regarding the categories, materials science, multidisciplinary, applied physics, and manufacturing engineering are the most commonly used DED processes. Northwestern Polytechnical University, Fraunhofer Gesellschaft, and the United States Department of Energy (DOE) have performed the most research in the field of DED.
- Open Access
On the Prediction and Optimisation of Processing Parameters in Directed Energy Deposition of SS316L via Finite Element Simulation and Machine Learning
In the current study, the integration of finite element simulation and machine learning is used to find the optimal combination of processing parameters in the directed energy deposition of SS316L. To achieve this, the FE simulation was validated against previously implemented research, and a series of simulations were conducted. Three inputs, namely laser power, scanning speed, and laser beam radius, and two outputs, namely residual stress and displacement, were considered. To run the machine learning model, artificial neural networks and a non-dominated sorting genetic algorithm were applied to determine the optimal combination of processing parameters. In addition, the current study underscores the novelty of combining FE simulation and machine learning methods, which provides enhanced precision and efficiency in controlling residual stress and displacement (geometrical deviation) in the Directed Energy Deposition (DED) process. Then, the results obtained via machine learning were validated with confirmatory tests and reported. The findings offer a practical solution for process parameter optimization, contributing to the progression of additive manufacturing technologies.
Open AccessOn the Prediction and Optimisation of Processing Parameters in Directed Energy Deposition of SS316L via Finite Element Simulation and Machine Learning
In the current study, the integration of finite element simulation and machine learning is used to find the optimal combination of processing parameters in the directed energy deposition of SS316L. To achieve this, the FE simulation was validated against previously implemented research, and a series of simulations were conducted. Three inputs, namely laser power, scanning speed, and laser beam radius, and two outputs, namely residual stress and displacement, were considered. To run the machine learning model, artificial neural networks and a non-dominated sorting genetic algorithm were applied to determine the optimal combination of processing parameters. In addition, the current study underscores the novelty of combining FE simulation and machine learning methods, which provides enhanced precision and efficiency in controlling residual stress and displacement (geometrical deviation) in the Directed Energy Deposition (DED) process. Then, the results obtained via machine learning were validated with confirmatory tests and reported. The findings offer a practical solution for process parameter optimization, contributing to the progression of additive manufacturing technologies.
- Open Access
- 30 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9921
A Short Review on the Wire-Based Directed Energy Deposition of Metals: Mechanical and Microstructural Properties and Quality Enhancement
Wire-based directed energy deposition (WDED) is an emerging additive manufacturing process garnering significant attention due to its potential for fabricating metal components with tailored mechanical and microstructural properties. This study reviews the WDED process, focusing on fabrication techniques, mechanical behaviors, microstructural characteristics, and quality enhancement methods. Utilizing data from the Web of Science, the study identifies leading countries in WDED research and highlights a growing interest in the field, particularly in materials engineering. Stainless steel, titanium, aluminum, and copper-based alloys are prominent materials for WDED applications. Furthermore, the study explores post-processing techniques such as machining, heat treatment, and surface finishing as integral steps for quality enhancement in WDED components.
- 30 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9921
Open AccessA Short Review on the Wire-Based Directed Energy Deposition of Metals: Mechanical and Microstructural Properties and Quality Enhancement
Wire-based directed energy deposition (WDED) is an emerging additive manufacturing process garnering significant attention due to its potential for fabricating metal components with tailored mechanical and microstructural properties. This study reviews the WDED process, focusing on fabrication techniques, mechanical behaviors, microstructural characteristics, and quality enhancement methods. Utilizing data from the Web of Science, the study identifies leading countries in WDED research and highlights a growing interest in the field, particularly in materials engineering. Stainless steel, titanium, aluminum, and copper-based alloys are prominent materials for WDED applications. Furthermore, the study explores post-processing techniques such as machining, heat treatment, and surface finishing as integral steps for quality enhancement in WDED components.
- Open Access
- 14 July 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 180, 111427
Dissimilar laser welding of an as-rolled CoCrFeMnNi high entropy alloy to Inconel 718 superalloy
- 14 July 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 180, 111427
Open AccessDissimilar laser welding of an as-rolled CoCrFeMnNi high entropy alloy to Inconel 718 superalloy
- Open Access
Development of a Compact Incremental Forming Machine
Since the beginning of the 21st century, incremental sheet-metal-forming processes, such as single-point incremental forming (SPIF), have been the subject of extensive research. The SPIF process is highlighted as an efficient and cost-effective solution for producing complex parts with different materials and scales, surpassing conventional methods and being ideal for small series and customized products. Various machines can be used to implement SPIF, such as adapted milling machines, serial robots, and dedicated machines, each with its own advantages. However, although it requires a higher initial investment, a dedicated machine offers superior performance. The objective of this project was the creation of a compact and portable dedicated machine, which included the design of suitable kinematics, a mechanical project, and numerical control. The structural design led to the optimization of the dimensions of the robot arms. Direct and indirect kinematics were analyzed. Finally, the careful selection and adaptation of components were carried out, bearing in mind the support system of the forming punch, including the selection and sizing of motors, reducers, and linear actuators. A functional early prototype was successfully built and tested.
Open AccessDevelopment of a Compact Incremental Forming Machine
Since the beginning of the 21st century, incremental sheet-metal-forming processes, such as single-point incremental forming (SPIF), have been the subject of extensive research. The SPIF process is highlighted as an efficient and cost-effective solution for producing complex parts with different materials and scales, surpassing conventional methods and being ideal for small series and customized products. Various machines can be used to implement SPIF, such as adapted milling machines, serial robots, and dedicated machines, each with its own advantages. However, although it requires a higher initial investment, a dedicated machine offers superior performance. The objective of this project was the creation of a compact and portable dedicated machine, which included the design of suitable kinematics, a mechanical project, and numerical control. The structural design led to the optimization of the dimensions of the robot arms. Direct and indirect kinematics were analyzed. Finally, the careful selection and adaptation of components were carried out, bearing in mind the support system of the forming punch, including the selection and sizing of motors, reducers, and linear actuators. A functional early prototype was successfully built and tested.
- 7 July 2022
- Published by Instituto Politecnico de Castelo Branco
- Vol. III, 140-151
Fabrico digital de produtos costumizados para apoio à aprendizagem de instrumentos musicais
This work is part of a project that aims to design and develop personalized products, using additive manufacturing technology (commonly 3D printing), to support individuals with physical limitations in learning a musical instrument. An exploratory case study is approached that intends to develop an artifact to aid the learning of violin by an individual with a malformation in the left upper limb. The initial geometry, adapted to the user's anatomy, was obtained using molding paste. From there, we advanced to the digital model using 3D scanning methods and 3D modeling techniques. Finally, two prototypes were produced, using additive manufacturing techniques using FFF and Polyjet technologies. The evaluation of the prototypes produced was carried out through tests with the user, verifying the need to make adjustments. In the next stages of the work, it is intended to obtain a fnal artifact completely adapted to the user's anatomy that allows, facilitates, and helps the learning of the instrument. It is then intended to apply and systematize the knowledge developed through this exploratory case in similar cases.
- 7 July 2022
- Published by Instituto Politecnico de Castelo Branco
- Vol. III, 140-151
Fabrico digital de produtos costumizados para apoio à aprendizagem de instrumentos musicais
This work is part of a project that aims to design and develop personalized products, using additive manufacturing technology (commonly 3D printing), to support individuals with physical limitations in learning a musical instrument. An exploratory case study is approached that intends to develop an artifact to aid the learning of violin by an individual with a malformation in the left upper limb. The initial geometry, adapted to the user's anatomy, was obtained using molding paste. From there, we advanced to the digital model using 3D scanning methods and 3D modeling techniques. Finally, two prototypes were produced, using additive manufacturing techniques using FFF and Polyjet technologies. The evaluation of the prototypes produced was carried out through tests with the user, verifying the need to make adjustments. In the next stages of the work, it is intended to obtain a fnal artifact completely adapted to the user's anatomy that allows, facilitates, and helps the learning of the instrument. It is then intended to apply and systematize the knowledge developed through this exploratory case in similar cases.
- Open Access
- 19 July 2019
- Published by Association for Computing Machinery (ACM)
- p. 12-18
Industry Focused in Data Collection
- 19 July 2019
- Published by Association for Computing Machinery (ACM)
- p. 12-18
Open AccessIndustry Focused in Data Collection
- 3 May 2019
- Published by Springer Nature
- p. 45-55
Complementary Manufacturing Processes