Marco Villani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marco Villani has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Giuseppe Fabri
Department of Industrial and Information Engineering and Economics, University of L’Aquila, 67100 L’Aquila, Italy
23 shared publications - Marco Tursini
Department of Industrial and Information Engineering and Economy, University of LAquila, LAquila, Italy
22 shared publications - Luca Castellini
UmbraGroup, I-06034 Foligno (PG), Italy
13 shared publications - Andrea Credo
Department of Industrial and Information Engineering and Economics, University of L’Aquila, 67100 L’Aquila, Italy
12 shared publications - Francesco Parasiliti
Department of Industrial and Information Engineering and Economics, University of LAquila, LAquila, Italy
12 shared publications - Mircea Popescu
Motor Design Limited, Wrexham, U.K.
7 shared publications
Latest Publications
- Open Access
- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 14180-14192
Experimental Characterization and Optimal Control of Synchronous Reluctance Motors
Synchronous Reluctance Motors (SynRMs) offer high efficiency and cost advantages due to the absence of rotor magnets. However, optimal control requires accurate motor-specific characterization, typically demanding extensive and energy-intensive testing. This paper presents an energy-efficient experimental procedure using a back-to-back test bench, enabling the extraction of key performance maps such as Maximum Torque Per Ampere (MTPA) and Maximum Efficiency (ME) under realistic voltage and current constraints. The system employs two coupled SynRMs and coordinated vector control, significantly reducing energy consumption. Experimental results validate the approach and highlight its effectiveness for optimal SynRM control strategy design. In a back-to-back (B2B) configuration, two equal-power machines can be tested simultaneously, one as a motor and one as a generator, which reduces total experimental time by half and cuts external energy demand by up to ~85% compared to passive test benches and ~50% compared to regenerative benches.
- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 14180-14192
Open AccessExperimental Characterization and Optimal Control of Synchronous Reluctance Motors
Synchronous Reluctance Motors (SynRMs) offer high efficiency and cost advantages due to the absence of rotor magnets. However, optimal control requires accurate motor-specific characterization, typically demanding extensive and energy-intensive testing. This paper presents an energy-efficient experimental procedure using a back-to-back test bench, enabling the extraction of key performance maps such as Maximum Torque Per Ampere (MTPA) and Maximum Efficiency (ME) under realistic voltage and current constraints. The system employs two coupled SynRMs and coordinated vector control, significantly reducing energy consumption. Experimental results validate the approach and highlight its effectiveness for optimal SynRM control strategy design. In a back-to-back (B2B) configuration, two equal-power machines can be tested simultaneously, one as a motor and one as a generator, which reduces total experimental time by half and cuts external energy demand by up to ~85% compared to passive test benches and ~50% compared to regenerative benches.
- Open Access
- 27 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1-11
A Unified Approach for the Commissioning of Synchronous Reluctance Motor Drives
This paper presents a unified procedure for commissioning synchronous reluctance motor drives based on a fast sequence of targeted feedings using the drive inverter. The method requires measuring the values of the phase currents and their derivatives by time-based samplings with still rotor and subsequent model-based computations. It allows the self-evaluation of the phase resistance and the d-q axes inductances for the pre-set of the field-oriented current regulators. Moreover, it detects the rotor position without movement, a functionality needed at start-up for motors equipped with incremental encoders in the standard service. The study refers to a 3kW synchronous reluctance motor prototype with a flux barrier rotor. Both realistic simulations accounting for the non-linear machine behavior and experimental tests are presented, showing the error between the estimated position, the phase resistance, and the d-q axes inductances and the effective ones. The results prove the reliability of the method.
- 27 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1-11
Open AccessA Unified Approach for the Commissioning of Synchronous Reluctance Motor Drives
This paper presents a unified procedure for commissioning synchronous reluctance motor drives based on a fast sequence of targeted feedings using the drive inverter. The method requires measuring the values of the phase currents and their derivatives by time-based samplings with still rotor and subsequent model-based computations. It allows the self-evaluation of the phase resistance and the d-q axes inductances for the pre-set of the field-oriented current regulators. Moreover, it detects the rotor position without movement, a functionality needed at start-up for motors equipped with incremental encoders in the standard service. The study refers to a 3kW synchronous reluctance motor prototype with a flux barrier rotor. Both realistic simulations accounting for the non-linear machine behavior and experimental tests are presented, showing the error between the estimated position, the phase resistance, and the d-q axes inductances and the effective ones. The results prove the reliability of the method.
- Open Access
- 14 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (3) , 3889-3900
Design of Induction Motors With Flat Wires and Copper Rotor for E-Vehicles Traction System
This paper deals with the design of a 200kW/ 370Nm, induction machine for electrical vehicles traction system. The design aims to enhance the performance of the current induction machine technology for mass production making it suitable to be a rare earth free solution for electric vehicle applications. To this extent, suitable materials have been analyzed and selected, also by using of mechanical analysis and experimental data. Rotor die-casting, hairpin stator winding and specific cooling systems have been adopted within the proposed solutions. Extensive analytical and numerical methods are used for performance evaluation all over the full speed range of the machine.
- 14 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (3) , 3889-3900
Open AccessDesign of Induction Motors With Flat Wires and Copper Rotor for E-Vehicles Traction System
This paper deals with the design of a 200kW/ 370Nm, induction machine for electrical vehicles traction system. The design aims to enhance the performance of the current induction machine technology for mass production making it suitable to be a rare earth free solution for electric vehicle applications. To this extent, suitable materials have been analyzed and selected, also by using of mechanical analysis and experimental data. Rotor die-casting, hairpin stator winding and specific cooling systems have been adopted within the proposed solutions. Extensive analytical and numerical methods are used for performance evaluation all over the full speed range of the machine.
- Open Access
- 20 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 100094-100103
Line-Start Synchronous Reluctance Motor: A Reduced Manufacturing Cost Avenue to Achieve IE4 Efficiency Class
The paper presents the Line Start Synchronous Reluctance Motor (LSSynRM) technology as a promising avenue to bring IE3 motor portfolios to the IE4 efficiency class at contained manufacturing costs. Indeed, the achieving of IE4 efficiency class is concerning many motor manufacturers, where the small-medium manufacturers seem to face the higher efforts in converting their product portfolio. To this extent, a methodology to improve the IE3 Induction Motor (IM) efficiency by introducing the Line Start Synchronous Reluctance motor technology in the IM motor is presented. The new motor design guidelines and constraints are figured out to reduce the impact on the manufacturing process. The paper presents a detailed experimental validation of the realized prototype in steady-state and transient operation referring to a target IE3 IM. The prototype proved to be a cost-effective, mass production-ready solution for super-premium efficiency IE4 motors. The LSSynRM technology demonstrated to be an effective high-efficiency avenue at reduced manufacturing costs in a broad panorama of low-inertia industrial applications.
- 20 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 100094-100103
Open AccessLine-Start Synchronous Reluctance Motor: A Reduced Manufacturing Cost Avenue to Achieve IE4 Efficiency Class
The paper presents the Line Start Synchronous Reluctance Motor (LSSynRM) technology as a promising avenue to bring IE3 motor portfolios to the IE4 efficiency class at contained manufacturing costs. Indeed, the achieving of IE4 efficiency class is concerning many motor manufacturers, where the small-medium manufacturers seem to face the higher efforts in converting their product portfolio. To this extent, a methodology to improve the IE3 Induction Motor (IM) efficiency by introducing the Line Start Synchronous Reluctance motor technology in the IM motor is presented. The new motor design guidelines and constraints are figured out to reduce the impact on the manufacturing process. The paper presents a detailed experimental validation of the realized prototype in steady-state and transient operation referring to a target IE3 IM. The prototype proved to be a cost-effective, mass production-ready solution for super-premium efficiency IE4 motors. The LSSynRM technology demonstrated to be an effective high-efficiency avenue at reduced manufacturing costs in a broad panorama of low-inertia industrial applications.
- Open Access
- 15 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1253-1262
Impact of Manufacturing Stresses On Multiple-Rib Synchronous Reluctance Motor Performance
The effects of manufacturing stresses on the overall magnetic properties of electrical steel core applied in the stator and transversally-laminated rotor of Synchronous Reluctance motors are studied. In addition, it is investigated how the -manufacturing-degraded electrical steel core affects the electromagnetic performance of two different Synchronous Reluctance motors. The traditional transversally-laminated rotor of this kind of a machine requires the adoption of mechanical elements (inner and tangential ribs) to maintain its mechanical integrity. Especially, for high-speed applications, the number of rotor ribs must be increased to make the rotor withstand higher centrifugal forces. Lamination manufacturing typically affects the magnetic properties of electrical steel by reducing its permeability at the machined edge. This machining effect is greater when the overall core layer area surrounded by the machined edges is small i.e. the machined surface area ratio to the total core area is high. Considering this, the degradation of the core magnetic properties in the ribs could improve the performance of the machine, and this effect would be more visible when the machine is designed with a higher number of narrow ribs with the adoption of Topology Optimization. The paper aims to propose some guidelines for the simulation of these effects starting from the measurements on defined core samples and then based on the measured results the simulation model should be updated accordingly. The samples are manufactured from several assembled sheets in order to modify the width of the cut area while maintaining the same external geometry.
- 15 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1253-1262
Open AccessImpact of Manufacturing Stresses On Multiple-Rib Synchronous Reluctance Motor Performance
The effects of manufacturing stresses on the overall magnetic properties of electrical steel core applied in the stator and transversally-laminated rotor of Synchronous Reluctance motors are studied. In addition, it is investigated how the -manufacturing-degraded electrical steel core affects the electromagnetic performance of two different Synchronous Reluctance motors. The traditional transversally-laminated rotor of this kind of a machine requires the adoption of mechanical elements (inner and tangential ribs) to maintain its mechanical integrity. Especially, for high-speed applications, the number of rotor ribs must be increased to make the rotor withstand higher centrifugal forces. Lamination manufacturing typically affects the magnetic properties of electrical steel by reducing its permeability at the machined edge. This machining effect is greater when the overall core layer area surrounded by the machined edges is small i.e. the machined surface area ratio to the total core area is high. Considering this, the degradation of the core magnetic properties in the ribs could improve the performance of the machine, and this effect would be more visible when the machine is designed with a higher number of narrow ribs with the adoption of Topology Optimization. The paper aims to propose some guidelines for the simulation of these effects starting from the measurements on defined core samples and then based on the measured results the simulation model should be updated accordingly. The samples are manufactured from several assembled sheets in order to modify the width of the cut area while maintaining the same external geometry.
- Open Access
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (1) , 805-818
Adoption of the Synchronous Reluctance Motor in Electric Vehicles: A Focus on the Flux Weakening Capability
This article presents the definition of the performance that the electric motor should have in order to satisfy the requirements of the electric vehicle in terms of acceleration time and maximum speed, starting from a simplified vehicle model, considering the motor torque minimization and the input power minimization. In order to verify the effectiveness of the synchronous reluctance motor in traction applications, it has been evaluated in two case studies: a high-performance vehicle and a city car, where different flux weakening capabilities from the motor in function of the minimization strategies can be pursued to satisfy the requirements. If the car requires high performance in terms of acceleration time and maximum speed, the poor flux weakening capabilities of the synchronous reluctance motor induces a machine oversizing in terms of peak power; by assuming this, it is, however, possible to satisfy the requirements considering the maximum available encumbrance due to an advanced and innovative optimized design procedure. The motor of the city car is obtained only by modifying the stack length and the windings (scaled version), and on this last solution, a prototype has been realized and fully tested; the experimental tests confirm the results of the simulations.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (1) , 805-818
Open AccessAdoption of the Synchronous Reluctance Motor in Electric Vehicles: A Focus on the Flux Weakening Capability
This article presents the definition of the performance that the electric motor should have in order to satisfy the requirements of the electric vehicle in terms of acceleration time and maximum speed, starting from a simplified vehicle model, considering the motor torque minimization and the input power minimization. In order to verify the effectiveness of the synchronous reluctance motor in traction applications, it has been evaluated in two case studies: a high-performance vehicle and a city car, where different flux weakening capabilities from the motor in function of the minimization strategies can be pursued to satisfy the requirements. If the car requires high performance in terms of acceleration time and maximum speed, the poor flux weakening capabilities of the synchronous reluctance motor induces a machine oversizing in terms of peak power; by assuming this, it is, however, possible to satisfy the requirements considering the maximum available encumbrance due to an advanced and innovative optimized design procedure. The motor of the city car is obtained only by modifying the stack length and the windings (scaled version), and on this last solution, a prototype has been realized and fully tested; the experimental tests confirm the results of the simulations.
- Open Access
Impact of Wire Selection on the Performance of an Induction Motor for Automotive Applications
This paper investigates the impact of the wire selection on the performance of induction motors for automotive applications. The section of wire and the material are evaluated at a high speed of 200 kW in an induction motor designed for premium vehicle applications. The proposed solutions have the same electromagnetic and thermal constraints, as well as the same final encumbrance. The various wire and winding types differ in terms of slot design, phase resistance, end-winding overhanging portion, skin and proximity effects, and equivalent slot thermal conductivity. Their impacts are analyzed in terms of the operating area motor efficiency and they are tested in an automotive drive cycle, highlighting the advantages and disadvantages of each configuration.
Open AccessImpact of Wire Selection on the Performance of an Induction Motor for Automotive Applications
This paper investigates the impact of the wire selection on the performance of induction motors for automotive applications. The section of wire and the material are evaluated at a high speed of 200 kW in an induction motor designed for premium vehicle applications. The proposed solutions have the same electromagnetic and thermal constraints, as well as the same final encumbrance. The various wire and winding types differ in terms of slot design, phase resistance, end-winding overhanging portion, skin and proximity effects, and equivalent slot thermal conductivity. Their impacts are analyzed in terms of the operating area motor efficiency and they are tested in an automotive drive cycle, highlighting the advantages and disadvantages of each configuration.
- Open Access
- 30 April 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5401
A Battery-Free Sustainable Powertrain Solution for Hydrogen Fuel Cell City Transit Bus Application
The paper presents a sustainable electric powertrain for a transit city bus featuring an electrochemical battery-free power unit consisting of a hydrogen fuel cell stack and a kinetic energy storage system based on high-speed flywheels. A rare-earth free high-efficiency motor technology is adopted to pursue a more sustainable vehicle architecture by limiting the use of critical raw materials. A suitable dynamic energetic model of the full vehicle powertrain has been developed to investigate the feasibility of the traction system and the related energy management control strategy. The model includes losses characterisation, as a function of the load, of the main components of the powertrain by using experimental tests and literature data. The performance of the proposed solution is evaluated by simulating a vehicle mission on an urban path in real traffic conditions. Considerations about the effectiveness of the traction system are discussed.
- 30 April 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5401
Open AccessA Battery-Free Sustainable Powertrain Solution for Hydrogen Fuel Cell City Transit Bus Application
The paper presents a sustainable electric powertrain for a transit city bus featuring an electrochemical battery-free power unit consisting of a hydrogen fuel cell stack and a kinetic energy storage system based on high-speed flywheels. A rare-earth free high-efficiency motor technology is adopted to pursue a more sustainable vehicle architecture by limiting the use of critical raw materials. A suitable dynamic energetic model of the full vehicle powertrain has been developed to investigate the feasibility of the traction system and the related energy management control strategy. The model includes losses characterisation, as a function of the load, of the main components of the powertrain by using experimental tests and literature data. The performance of the proposed solution is evaluated by simulating a vehicle mission on an urban path in real traffic conditions. Considerations about the effectiveness of the traction system are discussed.
- 24 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (2) , 1931-1940
Cage Losses in Induction Motors Considering Harmonics: A New Finite Element Procedure and Comparison With the Time-Domain Approach
The cage losses in induction machines due to spatial or time harmonics in the air-gap field are a crucial parameter for a precise estimation of the machine efficiency. Using finite element, the common approach to consider the overall cage losses, by performing complete time-domain analyses. Alternatively, a rough estimation is achieved introducing equivalent parameters in the circuital model. In this paper, a methodology for cage losses computation due to air-gap spatial field harmonics is described. The proposed finite element procedure is faster than the time-domain analysis, since it is based on magneto-static and linear time-harmonic simulations to carefully consider the iron saturation and compute the induced currents in a specific working point. In the paper, a detailed procedure description and comparison with respect the time-domain approach is reported.
- 24 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (2) , 1931-1940
Cage Losses in Induction Motors Considering Harmonics: A New Finite Element Procedure and Comparison With the Time-Domain Approach
The cage losses in induction machines due to spatial or time harmonics in the air-gap field are a crucial parameter for a precise estimation of the machine efficiency. Using finite element, the common approach to consider the overall cage losses, by performing complete time-domain analyses. Alternatively, a rough estimation is achieved introducing equivalent parameters in the circuital model. In this paper, a methodology for cage losses computation due to air-gap spatial field harmonics is described. The proposed finite element procedure is faster than the time-domain analysis, since it is based on magneto-static and linear time-harmonic simulations to carefully consider the iron saturation and compute the induced currents in a specific working point. In the paper, a detailed procedure description and comparison with respect the time-domain approach is reported.
- 25 September 2021
- Published by Springer Nature
- p. 53-65
High-Efficiency IE4 Line-Start Synchronous Reluctance Motors
- 25 September 2021
- Published by Springer Nature
- p. 53-65
High-Efficiency IE4 Line-Start Synchronous Reluctance Motors