Rita So
Research Subjects
Rita So has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Roxanne Vingarzan
Applied Sciences PSOW Environment and Climate Change Canada Vancouver BC Canada
6 shared publications- Anthony Q. Liu
National Laboratory-West
3 shared publications - Armel Castellan
Client Services
3 shared publications Keith Jones
A Air Quality Science Unit, Prediction Services Directorate , Meteorological Services of Canada, Environment and Climate Change Canada , Vancouver , British Columbia , Canada
3 shared publications- Matthias Jakob
BGC Engineering Inc
3 shared publications - Melinda M. Brugman
National Laboratory-West
3 shared publications
Latest Publications
- Open Access
- 8 November 2021
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 57 (11)
Column Relative Humidity and Primary Condensation Rate as Two Useful Supplements to Atmospheric River Analysis
Landfalling atmospheric rivers (ARs) frequently trigger heavy and sometimes prolonged precipitation, especially in regions with favored orographic enhancement. The presence and strength of ARs are often described using the integrated water vapor (IWV) and the integrated vapor transport (IVT). However, the associated precipitation is not directly correlated with these two variables. Instead, the intensity of precipitation is mainly determined by the net convergence of moisture flux and the initial degree of saturation of the air column. In this study, a simple algorithm is proposed for estimating the heavy precipitation attributable to the IVT convergence. Bearing a strong resemblance to the Kuo‐Anthes parameterization scheme for cumulus convection, the proposed algorithm calculates the large‐scale primary condensation rate (PCR) as a proportion of the IVT convergence, with a reduction to account for the general moistening in the atmosphere. The amount of reduction is determined by the column relative humidity (CRH), which is defined as the ratio of IWV to its saturation counterpart. Our analysis indicates that the diagnosable PCR compares well to the forecast precipitation rate given by a numerical weather prediction model. It is also shown that the PCR in an air column with CRH 0.50 is negligibly small. The usefulness of CRH and PCR as two complements to standard AR analysis is illustrated in three case studies. The potential application of PCR to storm classification is also explored.
- 8 November 2021
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 57 (11)
Open AccessColumn Relative Humidity and Primary Condensation Rate as Two Useful Supplements to Atmospheric River Analysis
Landfalling atmospheric rivers (ARs) frequently trigger heavy and sometimes prolonged precipitation, especially in regions with favored orographic enhancement. The presence and strength of ARs are often described using the integrated water vapor (IWV) and the integrated vapor transport (IVT). However, the associated precipitation is not directly correlated with these two variables. Instead, the intensity of precipitation is mainly determined by the net convergence of moisture flux and the initial degree of saturation of the air column. In this study, a simple algorithm is proposed for estimating the heavy precipitation attributable to the IVT convergence. Bearing a strong resemblance to the Kuo‐Anthes parameterization scheme for cumulus convection, the proposed algorithm calculates the large‐scale primary condensation rate (PCR) as a proportion of the IVT convergence, with a reduction to account for the general moistening in the atmosphere. The amount of reduction is determined by the column relative humidity (CRH), which is defined as the ratio of IWV to its saturation counterpart. Our analysis indicates that the diagnosable PCR compares well to the forecast precipitation rate given by a numerical weather prediction model. It is also shown that the PCR in an air column with CRH 0.50 is negligibly small. The usefulness of CRH and PCR as two complements to standard AR analysis is illustrated in three case studies. The potential application of PCR to storm classification is also explored.
- Open Access
- 24 June 2021
- Published by Wiley in ESS Open Archive
Column Relative Humidity and Primary Condensation Rate as Two Useful Supplements to Atmospheric River Analysis
Landfalling atmospheric rivers (ARs) frequently trigger heavy and sometimes prolonged precipitation, especially in regions with favored orographic enhancement. The presence and strength of ARs are often described using the integrated water vapor (IWV) and the integrated vapor transport (IVT). However, the associated precipitation is not directly correlated with these two variables. Instead, the intensity of precipitation is mainly determined by the net convergence of moisture flux and the initial degree of saturation of the air column. In this study, a simple algorithm is proposed for estimating the heavy precipitation attributable to the IVT convergence. Bearing a strong resemblance to the Kuo-Anthes parameterization scheme for cumulus convection, the proposed algorithm calculates the large-scale primary condensation rate (PCR) as a proportion of the IVT convergence, with a reduction to account for the general moistening in the atmosphere. The amount of reduction is determined by the column relative humidity (CRH), which is defined as the ratio of IWV to its saturation counterpart. Our analysis indicates that the diagnosable PCR compares well to the forecast precipitation rate given by a numerical weather prediction model. It is also shown that the PCR in an air column with CRH < 0.50 is negligibly small. The usefulness of CRH and PCR as two complements to standard AR analysis is illustrated in three case studies. The potential application of PCR to storm classification is also explored.
- 24 June 2021
- Published by Wiley in ESS Open Archive
Open AccessColumn Relative Humidity and Primary Condensation Rate as Two Useful Supplements to Atmospheric River Analysis
Landfalling atmospheric rivers (ARs) frequently trigger heavy and sometimes prolonged precipitation, especially in regions with favored orographic enhancement. The presence and strength of ARs are often described using the integrated water vapor (IWV) and the integrated vapor transport (IVT). However, the associated precipitation is not directly correlated with these two variables. Instead, the intensity of precipitation is mainly determined by the net convergence of moisture flux and the initial degree of saturation of the air column. In this study, a simple algorithm is proposed for estimating the heavy precipitation attributable to the IVT convergence. Bearing a strong resemblance to the Kuo-Anthes parameterization scheme for cumulus convection, the proposed algorithm calculates the large-scale primary condensation rate (PCR) as a proportion of the IVT convergence, with a reduction to account for the general moistening in the atmosphere. The amount of reduction is determined by the column relative humidity (CRH), which is defined as the ratio of IWV to its saturation counterpart. Our analysis indicates that the diagnosable PCR compares well to the forecast precipitation rate given by a numerical weather prediction model. It is also shown that the PCR in an air column with CRH < 0.50 is negligibly small. The usefulness of CRH and PCR as two complements to standard AR analysis is illustrated in three case studies. The potential application of PCR to storm classification is also explored.
- Open Access
- 26 January 2021
- Published by Wiley in ESS Open Archive
Primary Condensation Rate and Column Relative Humidity as Two Useful Supplements to Atmospheric River Analysis
Landfalling atmospheric rivers (ARs) frequently trigger heavy and sometimes prolonged precipitation, especially in regions with significant orography. The presence and strength of ARs are often described using the integrated water vapor (IWV) and the integrated vapor transport (IVT). However, the associated precipitation is not directly correlated with these two variables. Instead the intensity of precipitation is mainly determined by the net convergence of moisture and the initial degree of saturation of the air column. In this study, a simple algorithm is proposed for estimating the heavy precipitation attributable to the IVT convergence. Bearing a strong resemblance to the Kuo-Anthes parameterization scheme for cumulus convection, the proposed algorithm calculates the large-scale primary condensation rate (PCR) as a proportion of the IVT convergence, with a reduction to account for the general moistening in the atmosphere. The amount of reduction is determined by the column relative humidity (CRH), which is defined as the ratio of IWV to its saturation counterpart. Our analysis indicates that the diagnosable PCR compares well to the forecast precipitation rate given by the numerical weather prediction model. It is also shown that the PCR in an air column with CRH < 0.50 is negligibly small. The usefulness of CRH and PCR as two complements to standard AR analysis is illustrated in some case studies. The potential application of PCR to storm classification is also explored.
- 26 January 2021
- Published by Wiley in ESS Open Archive
Open AccessPrimary Condensation Rate and Column Relative Humidity as Two Useful Supplements to Atmospheric River Analysis
Landfalling atmospheric rivers (ARs) frequently trigger heavy and sometimes prolonged precipitation, especially in regions with significant orography. The presence and strength of ARs are often described using the integrated water vapor (IWV) and the integrated vapor transport (IVT). However, the associated precipitation is not directly correlated with these two variables. Instead the intensity of precipitation is mainly determined by the net convergence of moisture and the initial degree of saturation of the air column. In this study, a simple algorithm is proposed for estimating the heavy precipitation attributable to the IVT convergence. Bearing a strong resemblance to the Kuo-Anthes parameterization scheme for cumulus convection, the proposed algorithm calculates the large-scale primary condensation rate (PCR) as a proportion of the IVT convergence, with a reduction to account for the general moistening in the atmosphere. The amount of reduction is determined by the column relative humidity (CRH), which is defined as the ratio of IWV to its saturation counterpart. Our analysis indicates that the diagnosable PCR compares well to the forecast precipitation rate given by the numerical weather prediction model. It is also shown that the PCR in an air column with CRH < 0.50 is negligibly small. The usefulness of CRH and PCR as two complements to standard AR analysis is illustrated in some case studies. The potential application of PCR to storm classification is also explored.
- Open Access
- 17 January 2018
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 68 (5) , 446-462
Development of visibility forecasting modeling framework for the Lower Fraser Valley of British Columbia using Canada’s Regional Air Quality Deterministic Prediction System
Visibility degradation, one of the most noticeable indicators of poor air quality, can occur despite relatively low levels of particulate matter when the risk to human health is low. The availability of timely and reliable visibility forecasts can provide a more comprehensive understanding of the anticipated air quality conditions to better inform local jurisdictions and the public. This paper describes the development of a visibility forecasting modeling framework, which leverages the existing air quality and meteorological forecasts from Canada’s operational Regional Air Quality Deterministic Prediction System (RAQDPS) for the Lower Fraser Valley of British Columbia. A baseline model (GM-IMPROVE) was constructed using the revised IMPROVE algorithm based on unprocessed forecasts from the RAQDPS. Three additional prototypes (UMOS-HYB, GM-MLR, GM-RF) were also developed and assessed for forecast performance of up to 48 hr lead time during various air quality and meteorological conditions. Forecast performance was assessed by examining their ability to provide both numerical and categorical forecasts in the form of 1-hr total extinction and Visual Air Quality Ratings (VAQR), respectively. While GM-IMPROVE generally overestimated extinction more than twofold, it had skill in forecasting the relative species contribution to visibility impairment, including ammonium sulfate and ammonium nitrate. Both statistical prototypes, GM-MLR and GM-RF, performed well in forecasting 1-hr extinction during daylight hours, with correlation coefficients (R) ranging from 0.59 to 0.77. UMOS-HYB, a prototype based on postprocessed air quality forecasts without additional statistical modeling, provided reasonable forecasts during most daylight hours. In terms of categorical forecasts, the best prototype was approximately 75 to 87% correct, when forecasting for a condensed three-category VAQR. A case study, focusing on a poor visual air quality yet low Air Quality Health Index episode, illustrated that the statistical prototypes were able to provide timely and skillful visibility forecasts with lead time up to 48 hr. Implications: This study describes the development of a visibility forecasting modeling framework, which leverages the existing air quality and meteorological forecasts from Canada’s operational Regional Air Quality Deterministic Prediction System. The main applications include tourism and recreation planning, input into air quality management programs, and educational outreach. Visibility forecasts, when supplemented with the existing air quality and health based forecasts, can assist jurisdictions to anticipate the visual air quality impacts as perceived by the public, which can potentially assist in formulating the appropriate air quality bulletins and recommendations.
- 17 January 2018
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 68 (5) , 446-462
Open AccessDevelopment of visibility forecasting modeling framework for the Lower Fraser Valley of British Columbia using Canada’s Regional Air Quality Deterministic Prediction System
Visibility degradation, one of the most noticeable indicators of poor air quality, can occur despite relatively low levels of particulate matter when the risk to human health is low. The availability of timely and reliable visibility forecasts can provide a more comprehensive understanding of the anticipated air quality conditions to better inform local jurisdictions and the public. This paper describes the development of a visibility forecasting modeling framework, which leverages the existing air quality and meteorological forecasts from Canada’s operational Regional Air Quality Deterministic Prediction System (RAQDPS) for the Lower Fraser Valley of British Columbia. A baseline model (GM-IMPROVE) was constructed using the revised IMPROVE algorithm based on unprocessed forecasts from the RAQDPS. Three additional prototypes (UMOS-HYB, GM-MLR, GM-RF) were also developed and assessed for forecast performance of up to 48 hr lead time during various air quality and meteorological conditions. Forecast performance was assessed by examining their ability to provide both numerical and categorical forecasts in the form of 1-hr total extinction and Visual Air Quality Ratings (VAQR), respectively. While GM-IMPROVE generally overestimated extinction more than twofold, it had skill in forecasting the relative species contribution to visibility impairment, including ammonium sulfate and ammonium nitrate. Both statistical prototypes, GM-MLR and GM-RF, performed well in forecasting 1-hr extinction during daylight hours, with correlation coefficients (R) ranging from 0.59 to 0.77. UMOS-HYB, a prototype based on postprocessed air quality forecasts without additional statistical modeling, provided reasonable forecasts during most daylight hours. In terms of categorical forecasts, the best prototype was approximately 75 to 87% correct, when forecasting for a condensed three-category VAQR. A case study, focusing on a poor visual air quality yet low Air Quality Health Index episode, illustrated that the statistical prototypes were able to provide timely and skillful visibility forecasts with lead time up to 48 hr. Implications: This study describes the development of a visibility forecasting modeling framework, which leverages the existing air quality and meteorological forecasts from Canada’s operational Regional Air Quality Deterministic Prediction System. The main applications include tourism and recreation planning, input into air quality management programs, and educational outreach. Visibility forecasts, when supplemented with the existing air quality and health based forecasts, can assist jurisdictions to anticipate the visual air quality impacts as perceived by the public, which can potentially assist in formulating the appropriate air quality bulletins and recommendations.
- 1 July 2015
- Published by Elsevier in Atmospheric Environment
- Vol. 113, 108-117
Weekly agricultural emissions and ambient concentrations of ammonia: Validation of an emission inventory
- 1 July 2015
- Published by Elsevier in Atmospheric Environment
- Vol. 113, 108-117
Weekly agricultural emissions and ambient concentrations of ammonia: Validation of an emission inventory
- 6 February 2015
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 65 (6) , 707-720
Modeling of time-resolved light extinction and its applications to visibility management in the Lower Fraser Valley of British Columbia, Canada
Fine particulate matter (PM2.5) is the dominant cause of atmospheric visibility degradation in the Lower Fraser Valley (LFV) of British Columbia, where poor visibility due to air pollution is of concern. The spatial coverage of the current LFV visibility monitoring network is relatively low, with large parts of the airshed not being represented. Given the desire on the part of local and regional governments to manage visibility in the LFV airshed, the development of a method that allows near real-time estimation of 1-hr light extinction data from the dense network of PM measurements would be highly beneficial. This paper describes a simple linear algorithm, developed using the Hybrid method, to estimate near real-time 1-hr total light extinction at four monitoring sites in the LFV. Model inputs include ambient hourly PM2.5, NO2, relative humidity measurements, and historical monthly-averaged aerosol composition. The results indicate that the developed model can provide relatively accurate and time-resolved estimates of extinction in regions where visibility is not being monitored, thus extending the spatial coverage of the regional visibility monitoring network. The model was also applied to a number of policy-related scenarios to inform visual air quality management in the study area. Results indicated that in order to achieve a perceptible improvement (1.0 deciview) relative to baseline average visibility conditions in the LFV airshed, average ambient PM2.5 concentration would have to decrease by 17% from baseline conditions. Furthermore, to achieve a 20% increase in the number of daylight hours with "excellent" visibility, average PM2.5 would need to be reduced by 30%. Model simulations also indicated that "across-the-board" emission reduction policies would result in greater improvements for the "worst 20%" visibility conditions than for the "best 20%" conditions, suggesting that reducing the number of "poor" visibility days would be easier than improving the number of "excellent" visibility days. This study describes the development of a model using standard air quality monitoring data (PM2.5, NO2, relative humidity, and PM speciation profiles) to provide near real-time estimates of time-resolved extinction in regions where direct optical monitoring is not available. Applications of the model include extension of spatial coverage of a visibility network, testing various air quality scenarios to inform visibility management, and as a tool for setting visual air quality standards in impacted airsheds.
- 6 February 2015
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 65 (6) , 707-720
Modeling of time-resolved light extinction and its applications to visibility management in the Lower Fraser Valley of British Columbia, Canada
Fine particulate matter (PM2.5) is the dominant cause of atmospheric visibility degradation in the Lower Fraser Valley (LFV) of British Columbia, where poor visibility due to air pollution is of concern. The spatial coverage of the current LFV visibility monitoring network is relatively low, with large parts of the airshed not being represented. Given the desire on the part of local and regional governments to manage visibility in the LFV airshed, the development of a method that allows near real-time estimation of 1-hr light extinction data from the dense network of PM measurements would be highly beneficial. This paper describes a simple linear algorithm, developed using the Hybrid method, to estimate near real-time 1-hr total light extinction at four monitoring sites in the LFV. Model inputs include ambient hourly PM2.5, NO2, relative humidity measurements, and historical monthly-averaged aerosol composition. The results indicate that the developed model can provide relatively accurate and time-resolved estimates of extinction in regions where visibility is not being monitored, thus extending the spatial coverage of the regional visibility monitoring network. The model was also applied to a number of policy-related scenarios to inform visual air quality management in the study area. Results indicated that in order to achieve a perceptible improvement (1.0 deciview) relative to baseline average visibility conditions in the LFV airshed, average ambient PM2.5 concentration would have to decrease by 17% from baseline conditions. Furthermore, to achieve a 20% increase in the number of daylight hours with "excellent" visibility, average PM2.5 would need to be reduced by 30%. Model simulations also indicated that "across-the-board" emission reduction policies would result in greater improvements for the "worst 20%" visibility conditions than for the "best 20%" conditions, suggesting that reducing the number of "poor" visibility days would be easier than improving the number of "excellent" visibility days. This study describes the development of a model using standard air quality monitoring data (PM2.5, NO2, relative humidity, and PM speciation profiles) to provide near real-time estimates of time-resolved extinction in regions where direct optical monitoring is not available. Applications of the model include extension of spatial coverage of a visibility network, testing various air quality scenarios to inform visibility management, and as a tool for setting visual air quality standards in impacted airsheds.