ISIan Stone

Ian Stone

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ian Stone has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Simulation-Based Scenario ShakeMaps for Large Magnitude (Mw 6.5+) Crustal Earthquakes on the Seattle, Tacoma, and Southern Whidbey Island Faults, Washington, USA

    by Ian Stone, Erin A Wirth, Alex Grant, Julia Grossman, Arthur D Frankel

    Scenario ground-motion maps based on empirical ground-motion models (GMMs) provide a rapid and generally reliable means of estimating the amplitude and distribution of earthquake shaking. However, because GMMs are designed for broad applicability, they often rely on simplified representations of Earth structure, which can limit their accuracy in regions with complex source, path, and site effects. This can substantially impact the accuracy of predicted shaking in areas like western Washington State, where deep, interconnected basin structure exerts a strong influence on seismic-wave propagation. In this study, we present a new suite of simulation-based scenario ShakeMaps that characterize ground shaking from large-magnitude (Mw 6.5–7.5) earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults. These maps are developed using results from recent 3D wave propagation simulations (Stone et al., 2022, 2023, 2025) that incorporate realistic rupture geometries, variable slip distributions, and a regional 3D seismic velocity model with shallow soils. Broadband ground motions are estimated by combining the low-frequency (<1 Hz) deterministic seismograms from these studies with high-frequency (1–10 Hz) stochastic seismograms. Simulated ground motions are corrected to account for the enforced minimum shear-wave velocity and nonlinear site response. The resulting ShakeMaps represent median ground-shaking estimates derived from multiple rupture scenarios with varying slip distributions and hypocenter locations for each fault. To extend ShakeMap coverage beyond the simulation domain (i.e., into eastern Washington, northern Oregon, and southwestern British Columbia), we scale GMM-based ground-motion estimates using amplification patterns observed in the simulations. These new ShakeMaps reveal the substantial influence of deep basin structure on shaking intensity, underscoring the importance of considering crustal structure complexity in regional hazard assessments for the Pacific Northwest.


  • Open Access

    The Cascadia Region Earthquake Science Center (CRESCENT): Advancing Understanding of Cascadia’s Earthquake Hazards

    by Diego Melgar, Amanda M. Thomas, Valerie Sahakian, Pieter-Ewald Share, Andrew Meigs, Harold Tobin, Lydia Staisch, Timothy Melbourne, Jill Elizabeth, Rasheed Ajala, et al.

    The Cascadia subduction zone (CSZ) is capable of producing large megathrust earthquakes and tsunamis, posing substantial risks to the Pacific Northwest. This article examines the seismic characteristics of the CSZ, including its offshore coupling, sparse seismicity, and a complex paleoseismic record. Recent advances in geophysical methods and data collection have improved our understanding of subduction zone processes, but important uncertainties remain regarding rupture dynamics, ground shaking, and tsunami impacts. The Cascadia Region Earthquake Science Center (CRESCENT) has been established to address these challenges through coordinated research, education, and community engagement. By integrating scientific studies, fostering collaboration, and leveraging new technologies, CRESCENT seeks to improve hazard assessment and resilience in the region. This article outlines the primary challenges and opportunities for advancing subduction-zone science and supporting societal preparedness for future CSZ events.


  • Open Access

    New Constraints on Northeast Seattle Basin Structure from Converted Seismic Waves

    by Fred F. Pollitz, Ian P. Stone, Audrey M. Dunham, Erin A. Wirth

    The Seattle basin is a deep sedimentary basin in the Seattle–Bellevue, Washington metropolitan area within the Puget Lowland of Washington State. We determine the structure of a portion of the basin and the underlying basement using analysis of P waves converted from direct S incident from below. A deep local crustal event beneath Monroe, about 35 km northeast of Seattle, was recorded by a 100‐station nodal array deployed in 2019. The event produced a variety of coherent seismic phases, including converted waves from the sediment—basement boundary, internal structure within the basin, and additional crustal discontinuities. Using observed Sp converted waves, we apply an adjoint‐based full waveform inversion (FWI) method to determine the amplitude and extent of seismic discontinuities at depth. We find the strongest source of converted waves for this event lies ∼6 to 7 km depth below northern Lake Washington, interpreted to be the local depth to basement rock. The newly imaged shallow basement structure may be part of a deformation zone associated with the Siletzia eastern boundary. Our results highlight the utility of converted seismic waves recorded by a dense array, combined with an FWI method, to illuminate crustal structure.

  • Open Access

    High-Frequency and Region-Scale Simulations of Large (Mw 7+) Earthquakes on the Southern Whidbey Island Fault, Washington, USA

    by Ian Stone, Erin A. Wirth, Alex Grant, Arthur D. Frankel

    We simulate ground shaking in western Washington State from hypothetical Mw 7.0–7.5 earthquakes on the southern Whidbey Island fault (SWIF). Ground motions are modeled considering kinematic source distributions on a complex fault plane, a 3D seismic velocity model, and region-specific soil velocity models. We run simulations with varying model resolutions, including regional-scale simulations with a maximum-modeled frequency of ∼1 Hz and local-scale simulations with a maximum-modeled frequency of ∼2.5 Hz. Additional local-scale simulations are run considering high-resolution surface topography. We explore how source parameters (i.e., magnitude, hypocenter location, and dip direction) and 3D velocity structure impact peak shaking intensity and its variability. In particular, we find that earthquakes on the SWIF would likely produce strong shaking throughout the populated Puget Lowland, including in the cities of Everett, Seattle, Bellevue, and Tacoma, Washington. Simulated short-period (T ≤ 2 s) spectral accelerations are strong throughout the Puget Lowland, and long-period shaking (T ≥ 5 s) is strong in the deep regional sedimentary basins, especially the Everett and Seattle basins. Source parameters strongly influence intra- and interevent variability in response, primarily through changes in source and site geometry, as well as rupture directivity. We also note a potential coupling between rupture directivity and basin effects, wherein directivity pulses are seemingly guided through the region’s deep, interconnected sedimentary basins. Overall, this work highlights the impacts of 3D source, path, and site effects on seismic hazard in the U.S. Pacific Northwest and substantially expands the catalog of simulated ground motions for Puget Sound area crustal faults.


  • Open Access

    A Soil Velocity Model for Improved Ground Motion Simulations in the U. S. Pacific Northwest

    by Alex Grant, Erin Wirth, Ian Stone

    Near-surface seismic velocity structure may significantly impact the intensity, duration, and frequency content of ground shaking during an earthquake. In this study, we compile 649 shear wave velocity (Vs) profiles throughout the U.S. Pacific Northwest and southern British Columbia (PNW) and use these measured profiles to develop a representative soil velocity model for four major Holocene soil provinces: Puget Lowlands, Willamette Valley, fill and alluvium, and `other' soils. The resulting soil velocity model shows good agreement to measured data for a wide range of site conditions, with variability between different geologic domains reflecting fundamental differences in depositional environments. We then show that using this regional soil velocity model in simulations of the 2001 M6.8 Nisqually, Washington earthquake improves the fit to observed high-frequency (≥ 0.5 Hz) ground motions in the Puget Sound region compared to simulations that do not incorporate shallow (≤ 200 m) seismic velocity structure. Overall, this work shows that incorporating localized soil velocity profiles into seismic velocity models is important for accurately estimating high-frequency ground motion and regional seismic hazard in earthquake simulations. Future earthquake simulations and hazard studies in the PNW could incorporate these soil velocity profiles to capture the region's distinct site response characteristics.


  • Open Access

    Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

    by Erin A. Wirth, Alex R. Grant, Ian P. Stone, William J. Stephenson, Arthur D. Frankel

    The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity (VP and VS, respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum VS of 600 meters per second (m/s), the new model (v1.7) has a minimum VS of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.


  • Open Access

    Earthquake probabilities and hazards in the U.S. Pacific Northwest

    by Erin A. Wirth, Arthur D. Frankel, Brian L. Sherrod, Alex R. Grant, Audrey Dunham, Ian P. Stone, Julia Grossman

    Earthquakes and their cascading consequences pose a significant threat to the people, environment, infrastructure, and economy of the U.S. Pacific Northwest. The Pacific Northwest is susceptible to three types of earthquakes: deep (intraslab) earthquakes, subduction zone (megathrust) earthquakes, and shallow crustal earthquakes. For each of these earthquake types, earth scientists can use a variety of methods to estimate the probability of occurrence for future events, which constrains seismic hazard and informs building codes. The timing of past earthquakes indicates that there is an 85-percent chance of a magnitude 6.5 or greater deep earthquake in the Puget Sound region; a 10-15-percent chance of an approximately magnitude 9 earthquake on the Cascadia Subduction Zone; and a 17-percent chance of a magnitude 6.5 or greater crustal fault earthquake in the Puget Sound region in the next 50 years. Individuals and communities can take simple steps to prepare for and reduce the impact of future earthquakes.


  • 3D Wave Propagation Simulations of Mw 6.5+ Earthquakes on the Tacoma Fault, Washington State, Considering the Effects of Topography, a Geotechnical Gradient, and a Fault Damage Zone

    by Ian Stone, Erin A. Wirth, Alex Grant, Arthur D. Frankel

    We simulate shaking in Tacoma, Washington, and surrounding areas from Mw 6.5 and 7.0 earthquakes on the Tacoma fault. Ground motions are directly modeled up to 2.5 Hz using kinematic, finite‐fault sources; a 3D seismic velocity model considering regional geology; and a model mesh with 30 m sampling at the ground surface. In addition, we explore how adjustments to the seismic velocity model affect predicted shaking over a range of periods. These adjustments include the addition of a region‐specific geotechnical gradient, surface topography, and a fault damage zone. We find that the simulated shaking tends to be near estimates from empirical ground‐motion models (GMMs). However, long‐period (T = 5.0 s) shaking within the Tacoma basin is typically underpredicted by the GMMs. The fit between simulated and GMM‐derived short‐period (T = 0.5 s) shaking is significantly improved with the addition of the geotechnical gradient. From comparing different Mw 6.5 earthquake scenarios, we also find that the response of the Tacoma basin is sensitive to the azimuth of incoming seismic waves. In adding surface topography to the simulation, we find that average ground motion is similar to that produced from the nontopography model. However, shaking is often amplified at topographic highs and deamplified at topographic lows, and the wavefield undergoes extensive scattering. Adding a fault damage zone has the effect of amplifying short‐period shaking adjacent to the fault, while reducing far‐field shaking. Intermediate‐period shaking is amplified within the Tacoma basin, likely due to enhanced surface‐wave generation attributable to the fault damage zone waveguide. When applied in the same model, the topography and fault damage zone adjustments often enhance or reduce the effects of one another, adding further complexity to the wavefield. These results emphasize the importance of improving near‐surface velocity model resolution as waveform simulations progress toward higher frequencies.


  • Topographic Response to Simulated Mw 6.5–7.0 Earthquakes on the Seattle Fault

    by Ian Stone, Erin A. Wirth, Arthur D. Frankel

    We explore the response of ground motions to topography during large crustal fault earthquakes by simulating several magnitude 6.5–7.0 rupture scenarios on the Seattle fault, Washington State. Kinematic simulations are run using a 3D spectral element code and a detailed seismic velocity model for the Puget Sound region. This model includes realistic surface topography and a near-surface low-velocity layer; a mesh spacing of ∼30 m at the surface allows modeling of ground motions up to 3 Hz. We simulate 20 earthquake scenarios using different slip distributions and hypocenter locations on a planar fault surface. Results indicate that average ground motions in simulations with and without topography are similar. However, shaking amplification is common at topographic highs, and more than a quarter of all sites experience short-period (≤2 s) ground-motion amplification greater than 25%–35%, compared with models without topography. Comparisons of peak ground velocity at the top and bottom of topographic features demonstrate that amplification is sensitive to period, with the greatest amplifications typically manifesting near a topographic feature’s estimated resonance frequency and along azimuths perpendicular to its primary axis of elongation. However, interevent variability in topographic response can be significant, particularly at shorter periods (<1 s). We do not observe a clear relationship between source centroid-to-site azimuths and the strength of topographic amplification. Overall, our results suggest that although topographic resonance does influence the average ground motions, other processes (e.g., localized focusing and scattering) also play a significant role in determining topographic response. However, the amount of consistent, significant amplification due to topography suggests that topographic effects should likely be considered in some capacity during seismic hazard studies.


  • Structure and QP–QS Relations in the Seattle and Tualatin Basins from Converted Seismic Phases

    by Ian Stone, Erin A. Wirth, Arthur D. Frankel

    We use converted body‐wave phases from local earthquakes to constrain depth to basement and average attenuation relations for the Seattle basin in Washington and the Tualatin basin in Oregon. P‐, P‐to‐S‐(Ps), S‐to‐P‐(Sp), and S‐wave arrivals are present in three‐component recordings of magnitude 2.5–4.0 earthquakes at seismic stations located in these basins. Based on their relative travel times, these phases are attributed to body‐wave conversions at the basement‐to‐basin contact or to high‐impedance interfaces within the basins. Depth to basement values are calculated using the differential travel times between direct and converted phases, as well as average P‐ and S‐wave velocity values. We also identify a high‐impedance layer in the Tualatin basin that likely represents a laterally extensive deposit of volcanic materials embedded between the basement contact and the Columbia River Basalt Group. In addition, the average QP–QS attenuation relation is calculated for each station by taking the spectral ratio of converted phases to their parent body‐wave arrivals. For the Seattle basin, our analysis yields an average QP value of 73 and an average QS value of 60 for seismic waves with frequencies between 2 and 25 Hz. In the Tualatin basin, a much reduced QP–QS relation suggests that average body‐wave attenuation is likely higher than in the Seattle basin. The converted phase techniques presented here provide a reliable way to develop estimates of basin depth and attenuation structure for undercharacterized regions using simple passive source seismic records.