Yevgeny Moskovitz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yevgeny Moskovitz has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Simcha Srebnik
Department of Chemical and Biological Engineering, University of British Columbia, Vancouver, BC V6T 1Z3, Canada
4 shared publications Adi Biram
1 shared publicationAilifeire Fulati
Research Center for Functional Materials, National Institute for Materials Science (NIMS), 1-1Namiki, Tsukuba, Ibaraki 305-0044, Japan
1 shared publication- Alice Bliznyuk
Ilse Katz Institute for Nanoscale Science and Technology (IKI), Ben Gurion University of the Negev, Beer Sheva 8410501, Israel
1 shared publication - Eugeny Pavlyuk
Laboratory of Multi-Scale Mathematical Modeling, Ural Federal University, Ekaterinburg, Russian Federation
1 shared publication G. Rashkovan
Israel Naval Medical Institute, IDF Medical Corps, Haifa 31080, Israel
1 shared publication
Latest Publications
- Open Access
Studying the Effects of Dissolved Noble Gases and High Hydrostatic Pressure on the Spherical DOPC Bilayer Using Molecular Dynamic Simulations
Fine-grained molecular dynamics simulations have been conducted to depict lipid objects enclosed in water and interacting with a series of noble gases dissolved in the medium. The simple point-charge (SPC) water system, featuring a boundary composed of 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) molecules, maintained stability throughout the simulation under standard conditions. This allowed for the accurate modeling of the effects of hydrostatic pressure at an ambient pressure of 25 bar. The chosen pressure references the 240 m depth of seawater: the horizon frequently used by commercial divers, who comprise the primary patient population of the neurological complication of inert gas narcosis and the consequences of high-pressure neurological syndrome. To quantify and validate the neurological effects of noble gases and discriminate them from high hydrostatic pressure, we reduced the dissolved gas molar concentration to 1.5%, three times smaller than what we previously tested for the planar bilayer (3.5%). The nucleation and growth of xenon, argon and neon nanobubbles proved consistent with the data from the planar bilayer simulations. On the other hand, hyperbaric helium induces only a residual distorting effect on the liposome, with no significant condensed gas fraction observed within the hydrophobic core. The bubbles were distributed over a large volume—both in the bulk solvent and in the lipid phase—thereby causing substantial membrane distortion. This finding serves as evidence of the validity of the multisite distortion hypothesis for the neurological effect of inert gases at high pressure.
Open AccessStudying the Effects of Dissolved Noble Gases and High Hydrostatic Pressure on the Spherical DOPC Bilayer Using Molecular Dynamic Simulations
Fine-grained molecular dynamics simulations have been conducted to depict lipid objects enclosed in water and interacting with a series of noble gases dissolved in the medium. The simple point-charge (SPC) water system, featuring a boundary composed of 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) molecules, maintained stability throughout the simulation under standard conditions. This allowed for the accurate modeling of the effects of hydrostatic pressure at an ambient pressure of 25 bar. The chosen pressure references the 240 m depth of seawater: the horizon frequently used by commercial divers, who comprise the primary patient population of the neurological complication of inert gas narcosis and the consequences of high-pressure neurological syndrome. To quantify and validate the neurological effects of noble gases and discriminate them from high hydrostatic pressure, we reduced the dissolved gas molar concentration to 1.5%, three times smaller than what we previously tested for the planar bilayer (3.5%). The nucleation and growth of xenon, argon and neon nanobubbles proved consistent with the data from the planar bilayer simulations. On the other hand, hyperbaric helium induces only a residual distorting effect on the liposome, with no significant condensed gas fraction observed within the hydrophobic core. The bubbles were distributed over a large volume—both in the bulk solvent and in the lipid phase—thereby causing substantial membrane distortion. This finding serves as evidence of the validity of the multisite distortion hypothesis for the neurological effect of inert gases at high pressure.
- Open Access
- 23 May 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 126 (21) , 3961-3972
Full-Atomistic Optimized Potentials for Liquid Simulations and Polymer Consistent Force Field Models for Biocompatible Shape-Memory Poly(ε-caprolactone)
Thermally induced shape memory poly(ε-caprolactone) (PCL)-based polymers are one of the most extensively researched families of biocompatible materials. They are degradable under physiological conditions and have high applicability in general biomedical engineering, with cross-linked PCL networks being particularly useful for tissue engineering. In this study, we used the optimized potentials for liquid simulations (OPLS) force field, which is well suited for describing intermolecular interactions in biomolecules, and the class II polymer consistent force field (PCFF) to investigate the properties of telechelic PCL with diacrylates as reactive functionalities on its end groups. PCFF has been specifically parameterized for simulating synthetic polymeric materials. We compare the findings of all-atom molecular dynamics simulations with known experimental data and theoretical assumptions to verify the applicability of both these force fields. We estimated the melt density, volume, transition temperatures, and mechanical characteristics of two-branched PCL diacrylates with a molecular weight of 2481 Da. Our findings point to the utility of the aforementioned force fields in predicting the properties of PCL-based polymers. It also opens avenues for developing PCL cross-linked polymer models and employing OPLS to investigate the interactions of synthetic polymers with biomolecules.
- 23 May 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 126 (21) , 3961-3972
Open AccessFull-Atomistic Optimized Potentials for Liquid Simulations and Polymer Consistent Force Field Models for Biocompatible Shape-Memory Poly(ε-caprolactone)
Thermally induced shape memory poly(ε-caprolactone) (PCL)-based polymers are one of the most extensively researched families of biocompatible materials. They are degradable under physiological conditions and have high applicability in general biomedical engineering, with cross-linked PCL networks being particularly useful for tissue engineering. In this study, we used the optimized potentials for liquid simulations (OPLS) force field, which is well suited for describing intermolecular interactions in biomolecules, and the class II polymer consistent force field (PCFF) to investigate the properties of telechelic PCL with diacrylates as reactive functionalities on its end groups. PCFF has been specifically parameterized for simulating synthetic polymeric materials. We compare the findings of all-atom molecular dynamics simulations with known experimental data and theoretical assumptions to verify the applicability of both these force fields. We estimated the melt density, volume, transition temperatures, and mechanical characteristics of two-branched PCL diacrylates with a molecular weight of 2481 Da. Our findings point to the utility of the aforementioned force fields in predicting the properties of PCL-based polymers. It also opens avenues for developing PCL cross-linked polymer models and employing OPLS to investigate the interactions of synthetic polymers with biomolecules.
- 8 January 2015
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 11 (11) , 2125-2138
Modelling of noble anaesthetic gases and high hydrostatic pressure effects in lipid bilayers
Our objective was to study molecular processes that might be responsible for inert gas narcosis and high-pressure nervous syndrome.
- 8 January 2015
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 11 (11) , 2125-2138
Modelling of noble anaesthetic gases and high hydrostatic pressure effects in lipid bilayers
Our objective was to study molecular processes that might be responsible for inert gas narcosis and high-pressure nervous syndrome.
- Open Access
- 16 April 2014
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (23) , 11698-11707
Conformational changes of globular proteins upon adsorption on a hydrophobic surface
Coarse-grained Monte Carlo simulations are used to study thermal denaturation of small globular proteins adsorbed on a hydrophobic surface. Though helices are more stable than sheets, they are highly deformed in the adsorbed protein.
- 16 April 2014
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (23) , 11698-11707
Open AccessConformational changes of globular proteins upon adsorption on a hydrophobic surface
Coarse-grained Monte Carlo simulations are used to study thermal denaturation of small globular proteins adsorbed on a hydrophobic surface. Though helices are more stable than sheets, they are highly deformed in the adsorbed protein.
- 30 March 2012
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 14 (22) , 8013-8022
Thermal stability limits of proteins in solution and adsorbed on a hydrophobic surface
A coarse-grained Monte Carlo simulation is used to study thermal denaturation of small proteins in an infinitely dilute solution and adsorbed on a flat hydrophobic surface. Intermolecular interactions are modeled using the Miyazawa–Jernigan (MJ) knowledge-based potential for implicit solvent with the BULDG hydrophobicity scale. We analyze the thermal behavior of lysozyme for its prevalence of α-helices, fibronectin for its prevalence of β-sheets, and a short single helical peptide. Protein dimensions and contact maps are studied in detail before and during isothermal adsorption and heating. The MJ potential is shown to correctly predict the native conformation in solution under standard conditions, and the anticipated thermal stabilization of adsorbed proteins is observed when compared with heating in solution. The helix of the peptide is found to be much less stable thermally than the helices of lysozyme, reinforcing the importance of long-range forces in defining the protein structure. Contact map analysis of the adsorbed proteins shows correlation between the hydrophobicity of the secondary structure and their thermal stability on the surface.
- 30 March 2012
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 14 (22) , 8013-8022
Thermal stability limits of proteins in solution and adsorbed on a hydrophobic surface
A coarse-grained Monte Carlo simulation is used to study thermal denaturation of small proteins in an infinitely dilute solution and adsorbed on a flat hydrophobic surface. Intermolecular interactions are modeled using the Miyazawa–Jernigan (MJ) knowledge-based potential for implicit solvent with the BULDG hydrophobicity scale. We analyze the thermal behavior of lysozyme for its prevalence of α-helices, fibronectin for its prevalence of β-sheets, and a short single helical peptide. Protein dimensions and contact maps are studied in detail before and during isothermal adsorption and heating. The MJ potential is shown to correctly predict the native conformation in solution under standard conditions, and the anticipated thermal stabilization of adsorbed proteins is observed when compared with heating in solution. The helix of the peptide is found to be much less stable thermally than the helices of lysozyme, reinforcing the importance of long-range forces in defining the protein structure. Contact map analysis of the adsorbed proteins shows correlation between the hydrophobicity of the secondary structure and their thermal stability on the surface.
- 1 July 2005
- Published by Elsevier in Biophysical Journal
- Vol. 89 (1) , 22-31
Mean-Field Model of Immobilized Enzymes Embedded in a Grafted Polymer Layer
- 1 July 2005
- Published by Elsevier in Biophysical Journal
- Vol. 89 (1) , 22-31
Mean-Field Model of Immobilized Enzymes Embedded in a Grafted Polymer Layer
- 13 September 2004
- Published by American Physical Society (APS) in Physical Review E
- Vol. 70 (3) , 032902
Stabilization of surface-immobilized enzymes using grafted polymers
We introduce a two-dimensional lattice model of immobilization and stabilization of proteinlike polymers using grafted polymers. The protein is designed to have a specific bulk conformation reproducing a catalytic cleft of natural enzymes. Our model predicts a first order denaturing adsorption transition of free proteins. On the other hand, for an immobilized protein we observe a more gradual disappearance of the hydrophobic centers accompanied by adsorption. We show that, using hydrophilic grafted polymers of proper length and grafting density, the conformation as well as the hydrophobic centers of the protein can be restored.
- 13 September 2004
- Published by American Physical Society (APS) in Physical Review E
- Vol. 70 (3) , 032902
Stabilization of surface-immobilized enzymes using grafted polymers
We introduce a two-dimensional lattice model of immobilization and stabilization of proteinlike polymers using grafted polymers. The protein is designed to have a specific bulk conformation reproducing a catalytic cleft of natural enzymes. Our model predicts a first order denaturing adsorption transition of free proteins. On the other hand, for an immobilized protein we observe a more gradual disappearance of the hydrophobic centers accompanied by adsorption. We show that, using hydrophilic grafted polymers of proper length and grafting density, the conformation as well as the hydrophobic centers of the protein can be restored.
- 1 October 2001
- Published by American Physiological Society in Journal of Applied Physiology
- Vol. 91 (4) , 1582-1587
PCO(2) threshold for CNS oxygen toxicity in rats in the low range of hyperbaric PO(2).
Central nervous system (CNS) oxygen toxicity, as manifested by the first electrical discharge (FED) in the electroencephalogram, can occur as convulsions and loss of consciousness. CO2potentiates this risk by vasodilation and pH reduction. We suggest that CO2 can produce CNS oxygen toxicity at a Po2 that does not on its own ultimately cause FED. We searched for the CO2 threshold that will result in the appearance of FED at a Po2 between 507 and 253 kPa. Rats were exposed to a Po2 and an inspired Pco2 in 1-kPa steps to define the threshold for FED. The results confirmed our assumption that each rat has its own Pco2 threshold, any Pco2 above which will cause FED but below which no FED will occur. As Po2 decreased from 507 to 456, 405, and 355 kPa, the percentage of rats that exhibited FED without the addition of CO2 (F0) dropped from 91 to 62, to 8 and 0%, respectively. The percentage of rats (F) having FED as a function of Pco2 was sigmoid in shape and displaced toward high Pco2 with the reduction in Po2. The following formula is suggested to express risk as a function of Pco2and Po2
- 1 October 2001
- Published by American Physiological Society in Journal of Applied Physiology
- Vol. 91 (4) , 1582-1587
PCO(2) threshold for CNS oxygen toxicity in rats in the low range of hyperbaric PO(2).
Central nervous system (CNS) oxygen toxicity, as manifested by the first electrical discharge (FED) in the electroencephalogram, can occur as convulsions and loss of consciousness. CO2potentiates this risk by vasodilation and pH reduction. We suggest that CO2 can produce CNS oxygen toxicity at a Po2 that does not on its own ultimately cause FED. We searched for the CO2 threshold that will result in the appearance of FED at a Po2 between 507 and 253 kPa. Rats were exposed to a Po2 and an inspired Pco2 in 1-kPa steps to define the threshold for FED. The results confirmed our assumption that each rat has its own Pco2 threshold, any Pco2 above which will cause FED but below which no FED will occur. As Po2 decreased from 507 to 456, 405, and 355 kPa, the percentage of rats that exhibited FED without the addition of CO2 (F0) dropped from 91 to 62, to 8 and 0%, respectively. The percentage of rats (F) having FED as a function of Pco2 was sigmoid in shape and displaced toward high Pco2 with the reduction in Po2. The following formula is suggested to express risk as a function of Pco2and Po2
- 1 September 2001
- Published by American Physiological Society in Journal of Applied Physiology
- Vol. 91 (3) , 1327-1333
Humidity does not affect central nervous system oxygen toxicity.
Central nervous system (CNS) oxygen toxicity can occur as convulsions and loss of consciousness when hyperbaric oxygen is breathed in diving and hyperbaric medical therapy. Lin and Jamieson ( J Appl Physiol 75: 1980–1983, 1993) reported that humidity in the inspired gas enhances CNS oxygen toxicity. Because alveolar gas is fully saturated with water vapor, we could not see a cause and effect and surmised that other factors, such as metabolic rate, might be involved. Rats were exposed to 507- and 608-kPa O2 in dry (31 or 14%) or humid (99%) atmosphere until the appearance of the first electrical discharge preceding the clinical convulsions. Each rat served as its own control. A thermoneutral temperature (28 ± 0.4°C) yielded resting CO2 production of 0.81 ± 0.06 ml · g−1 · h−1. Latency to the first electrical discharge was not affected by humidity. At 507-kPa O2, latency was 23 ± 0.4 and 22 ± 0.7 min in dry and humid conditions, respectively, and, at 608-kPa O2, latency was 15 ± 4 and 14 ± 3 min in dry and humid conditions, respectively. When no effects of CO2 and metabolic rate are present, humidity does not affect CNS oxygen toxicity. Relevance of the findings to diving and hyperbaric therapy is discussed.
- 1 September 2001
- Published by American Physiological Society in Journal of Applied Physiology
- Vol. 91 (3) , 1327-1333
Humidity does not affect central nervous system oxygen toxicity.
Central nervous system (CNS) oxygen toxicity can occur as convulsions and loss of consciousness when hyperbaric oxygen is breathed in diving and hyperbaric medical therapy. Lin and Jamieson ( J Appl Physiol 75: 1980–1983, 1993) reported that humidity in the inspired gas enhances CNS oxygen toxicity. Because alveolar gas is fully saturated with water vapor, we could not see a cause and effect and surmised that other factors, such as metabolic rate, might be involved. Rats were exposed to 507- and 608-kPa O2 in dry (31 or 14%) or humid (99%) atmosphere until the appearance of the first electrical discharge preceding the clinical convulsions. Each rat served as its own control. A thermoneutral temperature (28 ± 0.4°C) yielded resting CO2 production of 0.81 ± 0.06 ml · g−1 · h−1. Latency to the first electrical discharge was not affected by humidity. At 507-kPa O2, latency was 23 ± 0.4 and 22 ± 0.7 min in dry and humid conditions, respectively, and, at 608-kPa O2, latency was 15 ± 4 and 14 ± 3 min in dry and humid conditions, respectively. When no effects of CO2 and metabolic rate are present, humidity does not affect CNS oxygen toxicity. Relevance of the findings to diving and hyperbaric therapy is discussed.