Daniel M. Kuchta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel M. Kuchta has a total of 96 co-authors. Here are the top co-authors by number of shared publications:
- Benjamin G. Lee
T. J. Watson Research Center, IBM Research, Yorktown Heights, New York United States 10598
4 shared publications Christian W. Baks
IBM Thomas J. Watson Research Center, Yorktown Heights, NY 10598 USA
4 shared publicationsMounir Meghelli
IBM Thomas J. Watson Research Center, Yorktown Heights, NY 10598, USA
3 shared publicationsAlessandro Cevrero
IBM Research Zürich, Rüschlikon, Switzerland
2 shared publicationsAlexander V. Rylyakov
IBM Thomas J. Watson Research Center, Yorktown Heights, NY 10598, USA
2 shared publicationsClint L. Schow
IBM Thomas J. Watson Research Center, Yorktown Heights, NY 10598, USA
2 shared publications
Latest Publications
- 1 January 2023
- Published by Optica Publishing Group
- p. AM1R.1
Progress of High-speed VCSELs and VCSEL-based Co-Packaging for Short Reach Communications
This paper covers the recent developments of high speed, ≥ 100Gb/s, VCSELs and VCSEL-based transceivers that are designed for co-packaging on a first level package with ASICs, such as CPUs, GPUs, and data center switches.
- 1 January 2023
- Published by Optica Publishing Group
- p. AM1R.1
Progress of High-speed VCSELs and VCSEL-based Co-Packaging for Short Reach Communications
This paper covers the recent developments of high speed, ≥ 100Gb/s, VCSELs and VCSEL-based transceivers that are designed for co-packaging on a first level package with ASICs, such as CPUs, GPUs, and data center switches.
- 1 January 2023
- Published by Optica Publishing Group
- p. M4E.6
Developments of VCSEL-based transceivers for Co-Packaging
This paper covers recent industry developments in VCSEL-based transceivers that are designed for co-packaging on a first level package with ASICs, such as CPUs, GPUs, and data center switches.
- 1 January 2023
- Published by Optica Publishing Group
- p. M4E.6
Developments of VCSEL-based transceivers for Co-Packaging
This paper covers recent industry developments in VCSEL-based transceivers that are designed for co-packaging on a first level package with ASICs, such as CPUs, GPUs, and data center switches.
- Open Access
- 4 March 2022
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 14 (6) , C1-C10
Toward higher-radix switches with co-packaged optics for improved network locality in data center and HPC networks [Invited]
We study the network locality improvements that can be achieved by using co-packaged optics in data center and high-performance computing (HPC) networks. The increased escape bandwidth offered by co-packaged optics can enable switches with speeds of 51.2 Tb/s and beyond. From a network architecture perspective, the key advantages of introducing co-packaged optics at the switch points include the implementation of large-scale topologies of > 12,000 end points with 4 × higher bisection bandwidth and the reduction of the required number of switches by > 40 % compared with state-of-the-art approaches. From a network operation perspective, improved network locality and faster operation can be achieved since the higher-radix switches can mitigate the impact of network contention. Placing applications under fewer leaf switches reduces the number of packets that cross the spine switches in a leaf-spine topology. The proposed scheme is evaluated via discrete-event simulations: we initially evaluate the network locality properties of the system by using virtual-machine traces from a production data center, and we subsequently quantify the performance improvements by simulating an all-to-all pattern for a variety of message sizes over a number of nodes. The results suggest that co-packaged optics form a promising solution for keeping up with bandwidth scaling in future networks. The virtual-machine analysis shows that large-scale applications can be placed under up to 50% fewer first-level switches, while the network analysis shows speedups of up to 7.1, which translates to execution time reductions of up to 26% and 42.7% for applications with communication ratios of 0.3 and 0.5, respectively.
- 4 March 2022
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 14 (6) , C1-C10
Open AccessToward higher-radix switches with co-packaged optics for improved network locality in data center and HPC networks [Invited]
We study the network locality improvements that can be achieved by using co-packaged optics in data center and high-performance computing (HPC) networks. The increased escape bandwidth offered by co-packaged optics can enable switches with speeds of 51.2 Tb/s and beyond. From a network architecture perspective, the key advantages of introducing co-packaged optics at the switch points include the implementation of large-scale topologies of > 12,000 end points with 4 × higher bisection bandwidth and the reduction of the required number of switches by > 40 % compared with state-of-the-art approaches. From a network operation perspective, improved network locality and faster operation can be achieved since the higher-radix switches can mitigate the impact of network contention. Placing applications under fewer leaf switches reduces the number of packets that cross the spine switches in a leaf-spine topology. The proposed scheme is evaluated via discrete-event simulations: we initially evaluate the network locality properties of the system by using virtual-machine traces from a production data center, and we subsequently quantify the performance improvements by simulating an all-to-all pattern for a variety of message sizes over a number of nodes. The results suggest that co-packaged optics form a promising solution for keeping up with bandwidth scaling in future networks. The virtual-machine analysis shows that large-scale applications can be placed under up to 50% fewer first-level switches, while the network analysis shows speedups of up to 7.1, which translates to execution time reductions of up to 26% and 42.7% for applications with communication ratios of 0.3 and 0.5, respectively.
- 1 January 2022
- Published by Optica Publishing Group
- p. NeTu1D.2
Motion: A High speed, low cost, low energy chip scale optical module for co-packaging on a first-level organic substrate for HPC and Data Centers
We report on progress and results towards the development of a high speed, low cost, low energy (<4pJ/bit) chip scale optical module for co-packaging on a first-level organic substrate for HPC and Data Center applications.
- 1 January 2022
- Published by Optica Publishing Group
- p. NeTu1D.2
Motion: A High speed, low cost, low energy chip scale optical module for co-packaging on a first-level organic substrate for HPC and Data Centers
We report on progress and results towards the development of a high speed, low cost, low energy (<4pJ/bit) chip scale optical module for co-packaging on a first-level organic substrate for HPC and Data Center applications.
- 4 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (2) , 178-184
A $4$ × $4$ Electrooptic Silicon Photonic Switch Fabric With Net Neutral Insertion LossWe present a strictly nonblocking 4×4 electrooptic silicon photonic switch fabric with on-chip gain. The switch integrates 12 Mach-Zehnder cells in a 3-stage topology equipped with fast electrooptic phase shifters, and thermooptic phase trimmers. To compensate for the losses of the fabric, a 4-channel GaInAsP/InP semiconductor optical amplifier array is flip-chip attached into an etched cavity in the silicon photonic chip with butt-coupled waveguide interfaces. The chip is wirebonded to a CMOS driver that provides push-pull drive to each elementary Mach-Zehnder cell. We demonstrate an optical switch assembly with net neutral insertion loss in the C-band together with nanosecond-scale reconfiguration time.
- 4 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (2) , 178-184
A $4$ × $4$ Electrooptic Silicon Photonic Switch Fabric With Net Neutral Insertion LossWe present a strictly nonblocking 4×4 electrooptic silicon photonic switch fabric with on-chip gain. The switch integrates 12 Mach-Zehnder cells in a 3-stage topology equipped with fast electrooptic phase shifters, and thermooptic phase trimmers. To compensate for the losses of the fabric, a 4-channel GaInAsP/InP semiconductor optical amplifier array is flip-chip attached into an etched cavity in the silicon photonic chip with butt-coupled waveguide interfaces. The chip is wirebonded to a CMOS driver that provides push-pull drive to each elementary Mach-Zehnder cell. We demonstrate an optical switch assembly with net neutral insertion loss in the C-band together with nanosecond-scale reconfiguration time.
- 1 January 2019
- Published by Optica Publishing Group
- p. M4D.6
Multi-wavelength Optical Transceivers Integrated on Node (MOTION)
We report on efforts to develop a high speed, low cost, low energy chip scale optical module for co-packaging on a first-level organic substrate for HPC and Data Center applications.
- 1 January 2019
- Published by Optica Publishing Group
- p. M4D.6
Multi-wavelength Optical Transceivers Integrated on Node (MOTION)
We report on efforts to develop a high speed, low cost, low energy chip scale optical module for co-packaging on a first-level organic substrate for HPC and Data Center applications.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 53 (4) , 1214-1226
A 32 Gb/s, 4.7 pJ/bit Optical Link With −11.7 dBm Sensitivity in 14-nm FinFET CMOS
This paper presents a 32 Gb/s non-return-to-zero optical link using 850-nm vertical-cavity surface-emitting laser-based multi-mode optics with 14-nm bulk FinFET CMOS circuits. The target application is the integration of optics on to the first-level package, connecting high-speed optical I/O directly to an advanced CMOS host chip (e.g., processor and switch) to increase package I/O bandwidth density and lower overall system power and cost. The optical link is designed for maximum link margin to tolerate high optical losses created by low-cost optical packaging. The transmitter (TX) uses a three-tap, 1/2-unit-interval-spaced feed-forward equalizer to improve eye opening. The receiver (RX) uses a low-bandwidth, low-noise transimpedance amplifier and a speculative one-tap decision-feedback equalizer for high sensitivity. The TX and RX power efficiencies are 3.3 and 1.4 pJ/bit, respectively. The TX optical modulation amplitude (OMA) is 1.2 dBm, and the RX sensitivity is -11.7 dBm OMA at a bit error rate of 10 -12 with PRBS31 data, providing 12.9-dB link margin.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 53 (4) , 1214-1226
A 32 Gb/s, 4.7 pJ/bit Optical Link With −11.7 dBm Sensitivity in 14-nm FinFET CMOS
This paper presents a 32 Gb/s non-return-to-zero optical link using 850-nm vertical-cavity surface-emitting laser-based multi-mode optics with 14-nm bulk FinFET CMOS circuits. The target application is the integration of optics on to the first-level package, connecting high-speed optical I/O directly to an advanced CMOS host chip (e.g., processor and switch) to increase package I/O bandwidth density and lower overall system power and cost. The optical link is designed for maximum link margin to tolerate high optical losses created by low-cost optical packaging. The transmitter (TX) uses a three-tap, 1/2-unit-interval-spaced feed-forward equalizer to improve eye opening. The receiver (RX) uses a low-bandwidth, low-noise transimpedance amplifier and a speculative one-tap decision-feedback equalizer for high sensitivity. The TX and RX power efficiencies are 3.3 and 1.4 pJ/bit, respectively. The TX optical modulation amplitude (OMA) is 1.2 dBm, and the RX sensitivity is -11.7 dBm OMA at a bit error rate of 10 -12 with PRBS31 data, providing 12.9-dB link margin.
- 7 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 53 (4) , 1227-1237
A 60-Gb/s 1.9-pJ/bit NRZ Optical Receiver With Low-Latency Digital CDR in 14-nm CMOS FinFET
This paper presents an analysis on the loop dynamics of the digital clock and data recovery (CDR) circuits and the design details of a non-return to zero optical receiver (RX) in a 14-nm bulk CMOS finFET technology with high jitter tolerance (JTOL) performance, which is designed based on the analysis. The digital CDR logic is designed full custom in order to keep it running at a quarter rate clock of 15 GHz at 60-Gb/s sampling speed to minimize the CDR loop latency. The RX is characterized in a vertical cavity surface emitting laser-based link recovering a 7-bit pseudo-random bit sequence bit pattern at 60 Gb/s with a JTOL corner frequency of around 80 MHz while maintaining an energy efficiency of 1.9 pJ/bit.
- 7 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 53 (4) , 1227-1237
A 60-Gb/s 1.9-pJ/bit NRZ Optical Receiver With Low-Latency Digital CDR in 14-nm CMOS FinFET
This paper presents an analysis on the loop dynamics of the digital clock and data recovery (CDR) circuits and the design details of a non-return to zero optical receiver (RX) in a 14-nm bulk CMOS finFET technology with high jitter tolerance (JTOL) performance, which is designed based on the analysis. The digital CDR logic is designed full custom in order to keep it running at a quarter rate clock of 15 GHz at 60-Gb/s sampling speed to minimize the CDR loop latency. The RX is characterized in a vertical cavity surface emitting laser-based link recovering a 7-bit pseudo-random bit sequence bit pattern at 60 Gb/s with a JTOL corner frequency of around 80 MHz while maintaining an energy efficiency of 1.9 pJ/bit.
- 8 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (14) , 3275-3282
Error-Free 56 Gb/s NRZ Modulation of a 1530-nm VCSEL Link
We demonstrate a 1530 nm VCSEL that can operate error-free without DSP or FEC to 56 Gb/s. At 50 Gb/s, error-free operation is attained up to 2 km of SMF. A two-tap FFE driver is used to precompensate the response of the VCSEL. The optical spectrum of the VCSEL under equalization at 50 Gb/s is analyzed and the chirp properties are reported. The low latency of FEC-free NRZ and the distance of 2 km makes these technology suitable for optical links in both high performance computing and large data centers.
- 8 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (14) , 3275-3282
Error-Free 56 Gb/s NRZ Modulation of a 1530-nm VCSEL Link
We demonstrate a 1530 nm VCSEL that can operate error-free without DSP or FEC to 56 Gb/s. At 50 Gb/s, error-free operation is attained up to 2 km of SMF. A two-tap FFE driver is used to precompensate the response of the VCSEL. The optical spectrum of the VCSEL under equalization at 50 Gb/s is analyzed and the chirp properties are reported. The low latency of FEC-free NRZ and the distance of 2 km makes these technology suitable for optical links in both high performance computing and large data centers.