Marco Sangiorgi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marco Sangiorgi has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Giorgia Cinelli
European Commission, Joint Research Centre (JRC), 21027 Ispra, Italy
4 shared publications Andrei Patrascu
European Commission, Joint Research Centre (JRC), Ispra, Italy
2 shared publications- Florian Fichot
IRSN BP3 -13115 St Paul lez Durance France
2 shared publications Giorgia Iurlaro
ENEA, Ispra, 21027, Italy
2 shared publicationsKevin Jackson
European Commission, Directorate-General for Energy (DG ENER), Luxembourg, Luxembourg
2 shared publicationsKonstantins Bogucarskis
European Commission, Joint Research Centre (JRC), Ispra, Italy
2 shared publications
Latest Publications
- Open Access
Methodology of safety evaluation of In-Vessel Retention
Molten corium stabilization following a severe accident is of crucial importance in order to ensure containment integrity on a long-term basis and minimizing radioactive elements releases outside the plant. Among the possible options, In-Vessel Retention (IVR) through external cooling appears as an attractive solution that would limit the dispersion of corium in the plant and minimize the risks of containment failure. Nevertheless its feasibility has to be proved.The IVR strategy is already adopted in Europe for some VVER 440 type 213 reactors thanks to thorough research work started in the '90s for the Finnish Loviisa power plant, and subsequently extended to Bohunice and Mochovce (Slovakia), Dukovany (Czech Republic) and Paks (Hungary) power plants. The strategy is also included in the design of some high power new Gen.III reactors such as AP1000, APR 1400 and Chinese HPR1000 and CAP1400. It has also been studied in the past for other reactor concepts like KERENA (1250 MWe - BWR), AP600 or VVER-640.Current approaches for reactors with relatively small power, such as VVER 440 or AP600, use conservative assumptions for the safety demonstration. However, for higher power reactors (around 1000 MWe), the safety margin is reduced and it is necessary to evaluate the IVR strategy with best-estimate methods in order to reduce the uncertainties associated with the involved phenomena. Additional R&D as well as a revision of the methodology are needed to ensure and demonstrate adequate safety margins, including, in particular, best-estimate evaluations of thermal load applied on the vessel and mechanical resistance of the ablated vessel.The IVMR project (In-Vessel Melt Retention) was built with the goal of providing new knowledge (experimental, theoretical and technical) and a new methodology able to provide a best-estimate evaluation of IVR strategy for large power reactors. The main objective of Task 2.1 within WP2 was to define a common methodology to analyse IVR Severe Accident Management (SAM) strategy for the different types of EU NPPs. It started by reviewing the status of existing methodology and aimed at elaborating a more general, updated and less conservative one applicable to several types of reactors.This paper describes the proposed new methodology. It starts with the identification of the deficiencies of the standard methodology when it is applied to a high power reactor. It introduces the minimum vessel thickness as a parameter representing the cumulated imbalance between internal heat load and external cooling. Then it explains how to use that parameter in the evaluation of the safety margin. Although some examples are given as illustrations, it must be kept in mind that this paper proposes a generic methodology but there cannot be any generic conclusion: any reactor design must be evaluated independently.
Open AccessMethodology of safety evaluation of In-Vessel Retention
Molten corium stabilization following a severe accident is of crucial importance in order to ensure containment integrity on a long-term basis and minimizing radioactive elements releases outside the plant. Among the possible options, In-Vessel Retention (IVR) through external cooling appears as an attractive solution that would limit the dispersion of corium in the plant and minimize the risks of containment failure. Nevertheless its feasibility has to be proved.The IVR strategy is already adopted in Europe for some VVER 440 type 213 reactors thanks to thorough research work started in the '90s for the Finnish Loviisa power plant, and subsequently extended to Bohunice and Mochovce (Slovakia), Dukovany (Czech Republic) and Paks (Hungary) power plants. The strategy is also included in the design of some high power new Gen.III reactors such as AP1000, APR 1400 and Chinese HPR1000 and CAP1400. It has also been studied in the past for other reactor concepts like KERENA (1250 MWe - BWR), AP600 or VVER-640.Current approaches for reactors with relatively small power, such as VVER 440 or AP600, use conservative assumptions for the safety demonstration. However, for higher power reactors (around 1000 MWe), the safety margin is reduced and it is necessary to evaluate the IVR strategy with best-estimate methods in order to reduce the uncertainties associated with the involved phenomena. Additional R&D as well as a revision of the methodology are needed to ensure and demonstrate adequate safety margins, including, in particular, best-estimate evaluations of thermal load applied on the vessel and mechanical resistance of the ablated vessel.The IVMR project (In-Vessel Melt Retention) was built with the goal of providing new knowledge (experimental, theoretical and technical) and a new methodology able to provide a best-estimate evaluation of IVR strategy for large power reactors. The main objective of Task 2.1 within WP2 was to define a common methodology to analyse IVR Severe Accident Management (SAM) strategy for the different types of EU NPPs. It started by reviewing the status of existing methodology and aimed at elaborating a more general, updated and less conservative one applicable to several types of reactors.This paper describes the proposed new methodology. It starts with the identification of the deficiencies of the standard methodology when it is applied to a high power reactor. It introduces the minimum vessel thickness as a parameter representing the cumulated imbalance between internal heat load and external cooling. Then it explains how to use that parameter in the evaluation of the safety margin. Although some examples are given as illustrations, it must be kept in mind that this paper proposes a generic methodology but there cannot be any generic conclusion: any reactor design must be evaluated independently.
- Open Access
- 15 April 2023
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 160
Analysing the performance of radiological monitoring network during nuclear accidents
- 15 April 2023
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 160
Open AccessAnalysing the performance of radiological monitoring network during nuclear accidents
- Open Access
Recent Advancements in Automated Vehicle Certification: How the Experience from the Nuclear Sector Contributed to Making Them a Reality
The current paper discusses the most recent advancements in automated vehicle (AV) certification and how existing regulations/best practices from the nuclear field helped make AVs a reality. In particular, three main pillars differentiate the newly devised certification frameworks from previous automotive regulations: the introduction of a safety management system, the adoption of in-service monitoring and reporting data logging systems, and the use of virtual testing to demonstrate the safety of the AV; a set of pillars that are also found in the nuclear practice. The argumentation is informed by relevant literature and shared experiences from the nuclear power plant and transportation fields where there are established safety practices to manage safety-critical cyber-physical systems. Although the nuclear and transportation fields might seem unrelated, strong synergies were found, including risk management approaches and operational data collection procedures, which supported the timely drafting of the new regulation for AVs. Nonetheless, some open challenges remain due to peculiar aspects of AVs that will need to be addressed in the near future. Namely, practical methodologies for the residual-risk calculation for the various Operational Design Domains (ODDs), the design of scalable monitoring techniques, and the definition of detailed procedures for the virtual testing tool qualification.
Open AccessRecent Advancements in Automated Vehicle Certification: How the Experience from the Nuclear Sector Contributed to Making Them a Reality
The current paper discusses the most recent advancements in automated vehicle (AV) certification and how existing regulations/best practices from the nuclear field helped make AVs a reality. In particular, three main pillars differentiate the newly devised certification frameworks from previous automotive regulations: the introduction of a safety management system, the adoption of in-service monitoring and reporting data logging systems, and the use of virtual testing to demonstrate the safety of the AV; a set of pillars that are also found in the nuclear practice. The argumentation is informed by relevant literature and shared experiences from the nuclear power plant and transportation fields where there are established safety practices to manage safety-critical cyber-physical systems. Although the nuclear and transportation fields might seem unrelated, strong synergies were found, including risk management approaches and operational data collection procedures, which supported the timely drafting of the new regulation for AVs. Nonetheless, some open challenges remain due to peculiar aspects of AVs that will need to be addressed in the near future. Namely, practical methodologies for the residual-risk calculation for the various Operational Design Domains (ODDs), the design of scalable monitoring techniques, and the definition of detailed procedures for the virtual testing tool qualification.
- Open Access
- 1 April 2021
- Published by Elsevier in Radiation Measurements
- Vol. 143
Investigation into the performance of dose rate measurement instruments used in non-governmental networks
- 1 April 2021
- Published by Elsevier in Radiation Measurements
- Vol. 143
Open AccessInvestigation into the performance of dose rate measurement instruments used in non-governmental networks
- Open Access
- 1 May 2020
- Published by Elsevier in Journal of Environmental Radioactivity
- Vol. 216, 106178
Dispersion and ground deposition of radioactive material according to airflow patterns for enhancing the preparedness to N/R emergencies
- 1 May 2020
- Published by Elsevier in Journal of Environmental Radioactivity
- Vol. 216, 106178
Open AccessDispersion and ground deposition of radioactive material according to airflow patterns for enhancing the preparedness to N/R emergencies
- Open Access
- 21 January 2020
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 12 (1) , 109-118
The European Radiological Data Exchange Platform (EURDEP): 25 years of monitoring data exchange
During the early phase of an accident with the release of radioactive material to the environment at the local or transboundary scale, a rapid and continuous system of information exchange, including real-time monitoring data to competent authorities and the public, is critical for setting up countermeasures. This information and data exchange must be carried out in a harmonized and consistent manner to facilitate its interpretation and analysis. After the Chernobyl accident in 1986, and in order to avoid the competent authorities being unprepared again for a similar event, the European Commission (EC) defined and put in place a directive (Council Decision 87/600/EURATOM, 1987) which essentially obliges a member state that decides to implement widespread countermeasures to protect its population to notify the European Commission without delay. The same Council Decision also specifies that the results of radiological monitoring must be made available to the European Commission and all potentially affected member states. Over the past 30 years, the European Commission has invested resources in developing and improving a complete system to carry out this delicate task, currently composed of two platforms: the European Community Urgent Radiological Information Exchange (ECURIE) and the European Radiological Data Exchange Platform (EURDEP). This paper aims to increase knowledge of the latter system as a valuable tool for understanding and analysing the radioactivity levels in Europe. Commencing with background information, in this paper, we will describe the EURDEP system in detail, with an emphasis on its status, data availability, and how these data are diffused depending on the audience. Within the scope of this publication, we describe an example of measurements available in the EURDEP system, which to be used for scientific purposes. We provide two complete datasets (air-concentration samples – https://doi.org/10.2905/23CBC7C4-4FCC-47D5-A286-F8A4EDC8215F; De Cort et al., 2019a; and gamma dose rates – https://doi.org/10.2905/0F9F3E2D-C8D7-4F46-BBE7-EACF3EED1560; De Cort et al., 2019b) for the recent radiological release of 106Ru in Europe, which occurred between the end of September and early October 2017. Records stored are publicly accessible through an unrestricted repository called COLLECTION belonging to the JRC Data Public Catalogue (https://data.jrc.ec.europa.eu, last access: 1 July 2019).
- 21 January 2020
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 12 (1) , 109-118
Open AccessThe European Radiological Data Exchange Platform (EURDEP): 25 years of monitoring data exchange
During the early phase of an accident with the release of radioactive material to the environment at the local or transboundary scale, a rapid and continuous system of information exchange, including real-time monitoring data to competent authorities and the public, is critical for setting up countermeasures. This information and data exchange must be carried out in a harmonized and consistent manner to facilitate its interpretation and analysis. After the Chernobyl accident in 1986, and in order to avoid the competent authorities being unprepared again for a similar event, the European Commission (EC) defined and put in place a directive (Council Decision 87/600/EURATOM, 1987) which essentially obliges a member state that decides to implement widespread countermeasures to protect its population to notify the European Commission without delay. The same Council Decision also specifies that the results of radiological monitoring must be made available to the European Commission and all potentially affected member states. Over the past 30 years, the European Commission has invested resources in developing and improving a complete system to carry out this delicate task, currently composed of two platforms: the European Community Urgent Radiological Information Exchange (ECURIE) and the European Radiological Data Exchange Platform (EURDEP). This paper aims to increase knowledge of the latter system as a valuable tool for understanding and analysing the radioactivity levels in Europe. Commencing with background information, in this paper, we will describe the EURDEP system in detail, with an emphasis on its status, data availability, and how these data are diffused depending on the audience. Within the scope of this publication, we describe an example of measurements available in the EURDEP system, which to be used for scientific purposes. We provide two complete datasets (air-concentration samples – https://doi.org/10.2905/23CBC7C4-4FCC-47D5-A286-F8A4EDC8215F; De Cort et al., 2019a; and gamma dose rates – https://doi.org/10.2905/0F9F3E2D-C8D7-4F46-BBE7-EACF3EED1560; De Cort et al., 2019b) for the recent radiological release of 106Ru in Europe, which occurred between the end of September and early October 2017. Records stored are publicly accessible through an unrestricted repository called COLLECTION belonging to the JRC Data Public Catalogue (https://data.jrc.ec.europa.eu, last access: 1 July 2019).
- Open Access
- 16 September 2019
- Published by Copernicus GmbH in EGUsphere
- Vol. 2019, 1-16
The European Union Radiological Data Exchange Platform (EURDEP): 25 years of monitoring data exchange
During the early phase of an accident with release of radioactive material to the atmosphere having an environmental impact at local or transboundary scale, a rapid and continuous notification and exchange of information including real-time environmental monitoring data to competent authorities and the public is essential to effect appropriate countermeasures. A rapid exchange of information and data must be carried out in a harmonised and consistent manner to facilitate its interpretation and analysis. After the Chernobyl accident in 1986, and in order to avoid that competent authorities be unprepared again for a similar event, the European Commission defined and put in place a Directive (Council Decision 87/600/EURATOM) which essentially obliges a member state that decides to implement widespread countermeasures to protect its population to notify the European Commission without delay. The same Council Decision also specifies that the results of radiological monitoring must be made available to the Commission and all potentially affected member states. Over the past 30 years, the European Commission has invested resources in developing and improving a complete system to carry out this delicate task, currently composed of two platforms: the European Community Urgent Radiological Information Exchange, ECURIE, and the European Radiological Data Exchange Platform, EURDEP. This paper aims to increase knowledge of this latter system as a valuable tool to understand and analyse the radioactivity levels in Europe. Commencing with background information, in this paper, we will describe the EURDEP system in detail, with an emphasis on its status, data availability, and how these data are diffused depending on the audience. Within the scope of this publication, we describe an example of measurements available in the EURDEP system, to be used for scientific purposes. We provide two complete datasets (air concentration samples, http://data.europa.eu/89h/23cbc7c4-4fcc-47d5-a286-f8a4edc8215f (De Cort et al., 2019a) and gamma dose rates, http://data.europa.eu/89h/0f9f3e2d-c8d7-4f46-bbe7-eacf3eed1560 (De Cort et al., 2019b)) for the recent radiological release of 106Ru in Europe which occurred between the end of September and early October 2017. Records stored are publicly accessible through an unrestricted repository called “COLLECTION” belonging to JRC Data Public Catalogue ( https://data.jrc.ec.europa.eu).
- 16 September 2019
- Published by Copernicus GmbH in EGUsphere
- Vol. 2019, 1-16
Open AccessThe European Union Radiological Data Exchange Platform (EURDEP): 25 years of monitoring data exchange
During the early phase of an accident with release of radioactive material to the atmosphere having an environmental impact at local or transboundary scale, a rapid and continuous notification and exchange of information including real-time environmental monitoring data to competent authorities and the public is essential to effect appropriate countermeasures. A rapid exchange of information and data must be carried out in a harmonised and consistent manner to facilitate its interpretation and analysis. After the Chernobyl accident in 1986, and in order to avoid that competent authorities be unprepared again for a similar event, the European Commission defined and put in place a Directive (Council Decision 87/600/EURATOM) which essentially obliges a member state that decides to implement widespread countermeasures to protect its population to notify the European Commission without delay. The same Council Decision also specifies that the results of radiological monitoring must be made available to the Commission and all potentially affected member states. Over the past 30 years, the European Commission has invested resources in developing and improving a complete system to carry out this delicate task, currently composed of two platforms: the European Community Urgent Radiological Information Exchange, ECURIE, and the European Radiological Data Exchange Platform, EURDEP. This paper aims to increase knowledge of this latter system as a valuable tool to understand and analyse the radioactivity levels in Europe. Commencing with background information, in this paper, we will describe the EURDEP system in detail, with an emphasis on its status, data availability, and how these data are diffused depending on the audience. Within the scope of this publication, we describe an example of measurements available in the EURDEP system, to be used for scientific purposes. We provide two complete datasets (air concentration samples, http://data.europa.eu/89h/23cbc7c4-4fcc-47d5-a286-f8a4edc8215f (De Cort et al., 2019a) and gamma dose rates, http://data.europa.eu/89h/0f9f3e2d-c8d7-4f46-bbe7-eacf3eed1560 (De Cort et al., 2019b)) for the recent radiological release of 106Ru in Europe which occurred between the end of September and early October 2017. Records stored are publicly accessible through an unrestricted repository called “COLLECTION” belonging to JRC Data Public Catalogue ( https://data.jrc.ec.europa.eu).
- Open Access
- 2 May 2019
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 11 (2) , 589-601
30 years of European Commission Radioactivity Environmental Monitoring data bank (REMdb) – an open door to boost environmental radioactivity research
The Radioactivity Environmental Monitoring data bank (REMdb) was created in the aftermath of the Chernobyl accident (1986) by the European Commission (EC) – Directorate-General Joint Research Centre (DG JRC), sited in Ispra (Italy). Since then it has been maintained there with the aim to keep a historical record of the Chernobyl accident and to store the radioactivity monitoring data gathered through the national environmental monitoring programs of the member states (MSs). The legal basis is the Euratom Treaty, Chapter III Health and Safety, Articles 35 and 36, which clarify that MSs shall periodically communicate to the EC information on environmental radioactivity levels. By collecting and validating this information in REMdb, JRC supports the DG for Energy in its responsibilities in returning qualified information to the MSs (competent authorities and general public) on the levels of radioactive contamination of the various compartments of the environment (air, water, soil) on the European Union scale. REMdb accepts data on radionuclide concentrations from EU MSs in both environmental samples and foodstuffs from 1984 onwards. To date, the total number of data records stored in REMdb exceeds 5 million, in this way providing the scientific community with a valuable archive of environmental radioactivity topics in Europe. Records stored in REMdb are publicly accessible until 2011 through an unrestricted repository “REM data bank – Years 1984–2006” https://doi.org/10.2905/jrc-10117-10024 (De Cort et al., 2007) and “REM data bank – Years 2007–2011” https://doi.org/10.2905/de42f259-fafe-4329-9798-9d8fabb98de5 (De Cort et al., 2012). Access to data from 2012 onwards is granted only after explicit request, until the corresponding monitoring report is published. Each data record contains information describing the sampling circumstances (sampling type, begin and end time), measurement conditions (value, nuclide, apparatus, etc.), location and date of sampling, and original data reference. In this paper the scope, features and extension of REMdb are described in detail.
- 2 May 2019
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 11 (2) , 589-601
Open Access30 years of European Commission Radioactivity Environmental Monitoring data bank (REMdb) – an open door to boost environmental radioactivity research
The Radioactivity Environmental Monitoring data bank (REMdb) was created in the aftermath of the Chernobyl accident (1986) by the European Commission (EC) – Directorate-General Joint Research Centre (DG JRC), sited in Ispra (Italy). Since then it has been maintained there with the aim to keep a historical record of the Chernobyl accident and to store the radioactivity monitoring data gathered through the national environmental monitoring programs of the member states (MSs). The legal basis is the Euratom Treaty, Chapter III Health and Safety, Articles 35 and 36, which clarify that MSs shall periodically communicate to the EC information on environmental radioactivity levels. By collecting and validating this information in REMdb, JRC supports the DG for Energy in its responsibilities in returning qualified information to the MSs (competent authorities and general public) on the levels of radioactive contamination of the various compartments of the environment (air, water, soil) on the European Union scale. REMdb accepts data on radionuclide concentrations from EU MSs in both environmental samples and foodstuffs from 1984 onwards. To date, the total number of data records stored in REMdb exceeds 5 million, in this way providing the scientific community with a valuable archive of environmental radioactivity topics in Europe. Records stored in REMdb are publicly accessible until 2011 through an unrestricted repository “REM data bank – Years 1984–2006” https://doi.org/10.2905/jrc-10117-10024 (De Cort et al., 2007) and “REM data bank – Years 2007–2011” https://doi.org/10.2905/de42f259-fafe-4329-9798-9d8fabb98de5 (De Cort et al., 2012). Access to data from 2012 onwards is granted only after explicit request, until the corresponding monitoring report is published. Each data record contains information describing the sampling circumstances (sampling type, begin and end time), measurement conditions (value, nuclide, apparatus, etc.), location and date of sampling, and original data reference. In this paper the scope, features and extension of REMdb are described in detail.
- Open Access
- 18 January 2019
- Published by Copernicus GmbH in EGUsphere
30 years of European Commission Radioactivity Environmental Monitoring Database (REMdb) – an open door to boost environmental radioactivity research
The Radioactivity Environmental Monitoring data bank (REMdb) was created in the aftermath of the Chernobyl accident (1986) by the European Commission (EC) – DG Joint Research Centre (DG JRC), sited in Ispra (Italy). Since then it has been maintained there with the aim to keep a historical record of the Chernobyl accident and to store the radioactivity monitoring data gathered through the national environmental monitoring programs of the Member States (MSs). The legal basis is the Euratom Treaty, Chapter III Health and Safety, Articles 35 and 36, which clarifies that MSs shall periodically communicate to the EC information on environmental radioactivity levels. By collecting and validating this information in the REMdb, JRC supports the DG for Energy in its responsibilities in returning qualified information to the MSs (competent authorities and general public) on the levels of radioactive contamination of the various compartments of the environment (air, water, soil) on the European Union scale. The REMdb accepts data on radionuclide concentrations from EU MSs in both environmental samples and foodstuffs from 1984 onwards. To date, the total number of data records stored in REMdb exceeds five million, in this way providing the scientific community with a valuable archive of environmental radioactivity topics in Europe. Records stored in the REMDdb are publicly accessible until 2006 through an unrestricted repository ("REM data bank – Years 1984–2006" http://doi.org/10.2905/jrc-10117-10024). Access to data from 2007 onwards is granted only after explicit request, until the corresponding monitoring report is published. Each data record contains information describing the sampling circumstances (sampling type, begin-end time), measurement conditions (value, nuclide, apparatus, etc.), location and date of sampling and original data reference. In this paper the scope, features and extension of the REMdb are described in detail.
- 18 January 2019
- Published by Copernicus GmbH in EGUsphere
Open Access30 years of European Commission Radioactivity Environmental Monitoring Database (REMdb) – an open door to boost environmental radioactivity research
The Radioactivity Environmental Monitoring data bank (REMdb) was created in the aftermath of the Chernobyl accident (1986) by the European Commission (EC) – DG Joint Research Centre (DG JRC), sited in Ispra (Italy). Since then it has been maintained there with the aim to keep a historical record of the Chernobyl accident and to store the radioactivity monitoring data gathered through the national environmental monitoring programs of the Member States (MSs). The legal basis is the Euratom Treaty, Chapter III Health and Safety, Articles 35 and 36, which clarifies that MSs shall periodically communicate to the EC information on environmental radioactivity levels. By collecting and validating this information in the REMdb, JRC supports the DG for Energy in its responsibilities in returning qualified information to the MSs (competent authorities and general public) on the levels of radioactive contamination of the various compartments of the environment (air, water, soil) on the European Union scale. The REMdb accepts data on radionuclide concentrations from EU MSs in both environmental samples and foodstuffs from 1984 onwards. To date, the total number of data records stored in REMdb exceeds five million, in this way providing the scientific community with a valuable archive of environmental radioactivity topics in Europe. Records stored in the REMDdb are publicly accessible until 2006 through an unrestricted repository ("REM data bank – Years 1984–2006" http://doi.org/10.2905/jrc-10117-10024). Access to data from 2007 onwards is granted only after explicit request, until the corresponding monitoring report is published. Each data record contains information describing the sampling circumstances (sampling type, begin-end time), measurement conditions (value, nuclide, apparatus, etc.), location and date of sampling and original data reference. In this paper the scope, features and extension of the REMdb are described in detail.
- 1 September 2018
- Published by Elsevier in Annals of Nuclear Energy
- Vol. 119, 36-45
Some considerations to improve the methodology to assess In-Vessel Retention strategy for high-power reactors
- 1 September 2018
- Published by Elsevier in Annals of Nuclear Energy
- Vol. 119, 36-45
Some considerations to improve the methodology to assess In-Vessel Retention strategy for high-power reactors