AVAchilleas K. Vortselas

Achilleas K. Vortselas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Achilleas K. Vortselas has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Reduction of the Contact Corrosion on the Electrical Networks by Applying Bimetallics

    by Andras Szalay, Athanasios G. Mamalis, Achilleas K. Vortselas, István Zador, Laszlo Lukacs

    The contact corrosion phenomena occuring at the electrical networks when two dissimilar metallic parts are connected to each other causes serious technical and economical problems. One possible solution to reduce the contact corrosion is the application of properly prepared bimetallics. The paper introduces the explosive cladding technique which can be successfully applied for manufacturing bimetallics matched to the given electrical circuit furthermore application possibilities of the explosively cladded bimetallics at electrical networks, railway systems and vehicles.

  • Explosive Metalworking: Experimental and Numerical Modeling Aspects

    by Andras Szalay, Athanasios G. Mamalis, István Zador, Achilleas K. Vortselas, Laszlo Lukacs

    The application of the High Energy Rate Forming (HERF) represents a new paradigm in the field of production of knowledge-based more components materials: furthermore, joining by plastic deformation of the materials is carried out directly, by high speed, high energy shock waves, without using energy transforming equipment as hydraulic presses etc. The energy sources of the HERF processes are either the electrical energy stored in capacitors or chemical energy stored in the high explosives. High explosives can be utilized for many metalworking techniques; however the three main types of explosive metalworking are: Explosive welding and cladding Explosive tubeforming Explosive compaction of powders and granulates. The present work briefly introduces the principles and practices of the three main types of the explosive metalworking techniques mentioned above and discusses aspects of their numerical simulation.


  • Analytical and Numerical Wear Modeling of Metallic Interfaces: A Statistical Asperity Approach

    by A. G. Mamalis, A. K. Vortselas, C. N. Panagopoulos

    Prediction of the wear rate based on fundamental material properties is to date an elusive goal due to the nonlinearity of wear mechanisms, the stochastic nature of the surface morphology, and the multiscale nature of the phenomenon. In the present work, a previously developed dual-scale model that addresses the above issues by employing single-asperity interactions at the microscale and the interaction between stochastic surface morphologies at the macroscale is applied. The microscale model can be analytical, based on slip-line field theory; semi-empirical, based on generalizing the observed mechanisms; or numerical, based on the mesh-free smooth particle hydrodynamics method. The macroscale model transforms the surface topography into a multivariate distribution of asperity parameters and maps the microscale model's response; then it simulates the wear process via a Monte Carlo simulation by querying the map and integrating over the interface to maintain a load-separation equilibrium. The multiscale model is applied to the case of abrasive and adhesive wear of mild steel, and the results corresponding to various analytical and numerical microscale models are compared.


  • Wear of ceramic interfaces: Multiscale statistical simulation

    by A.G. Mamalis, A.K. Vortselas


  • Tube extrusion of polymeric materials: Optimization of the processing parameters

    by A. G. Mamalis, A. K. Vortselas, G. Kouzilos

    In the study described in this article, we aimed to apply multiparametric optimization to the processing conditions in a spider die used for the extrusion of polymers, in this case, high‐density polyethylene tubes. Product quality is affected by the homogeneity of the flow speed and the temperature at the die exit. Inhomogeneity causes shape distortions and material weak spots (weld lines), and its major cause in spider dies is the discontinuity and distortion of the flow caused by spider legs, the ties by which the inner mandrel of the die is secured to its external casing. The Nelder–Mead nonlinear optimization technique was applied to the numerical model to pinpoint the processing conditions, namely, the inlet pressure, inlet temperature of the melt, temperature of the die walls, and temperature of the spider legs. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012


  • Design feature sensitivity analysis in a numerical model of an extrusion spider die

    by A. G. Mamalis, G. Kouzilos, A. K. Vortselas

    In this work, we aimed to develop an optimum design for a spider die used for the extrusion of high‐density polyethylene tubes. For this purpose, a computational‐fluid‐dynamics‐based model using the generalized Newtonian approach was employed to investigate the pressure drop, flow, and temperature uniformity in the die. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011


  • Numerical Simulation of Explosively Compacted Powder-in-Tube MgB2 Superconductor

    by Athanasios G. Mamalis, Ioannis D. Theodorakopoulos, Achilleas K. Vortselas

    High Tc MgB2 superconductors were fabricated using the ex-situ and in-situ powder in tube (PIT) technique. During treatment, the precursor materials were shock consolidated under high strain-rates using PETN as the explosive medium. After compaction, the superconducting properties of the steel-sheathed MgB2 samples were examined by means of magnetization measurements using a SQUID magnetometer. Bean’s critical state model was applied to investigate the critical current density characteristics of the samples at fields up to 5T. The superconducting transition temperature of the specimens was determined by examining the material temperature dependence of magnetisation in zero field cooled (ZFC) and field cooled (FC) states. An assessment of the explosive compaction technique was carried out by simulating the procedure using the LS-DYNA explicit finite element code. The sample is modelled as a porous soil-like material with a customised yield surface. The numerically estimated final product dimensions, porosity and hardness are compared to the experimental results; furthermore, the numerically obtained pressure, temperature and strain rate profiles are used to assess the efficiency of the compaction process for different explosive quantities and powder compositions.


  • Design Feature Sensitivity Analysis in Numerical Modeling of Extrusion Spider Dies

    by A. G. Mamalis, G. Kouzilos, A. K. Vortselas, A. D’amore, Domenico Acierno, Luigi Grassia

    The work described here, is aiming to the development of an optimum design for a spider die used for the extrusion of high density polyethylene (HDPE) tubes. For this purpose, a computational fluid dynamics(CFD) based model using the generalized Newtonian approach was employed, to investigate pressure drop, flow and temperature uniformity in the die.