Paul C. Gow
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Paul C. Gow has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
- Christopher Holmes
Optoelectronics Research Centre, University of Southampton, Southampton, UK
21 shared publications - James Christopher Gates
Optoelectronics Research Centre, University of Southampton, Southampton, UK
13 shared publications - Sam A. Berry
Optoelectronics Research Centre, University of Southampton, Southampton, SO17 1BJ, UK
12 shared publications Peter G. R. Smith
University of Southampton, Optoelectronics Research Centre, Southampton
11 shared publicationsJames C. Gates
Optoelectronics Research Centre University of Southampton Southampton UK
9 shared publicationsPaolo L. Mennea
Univ Southampton, Optoelect Res Ctr, Southampton SO17 1BJ, England
8 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 36 (1) , 015005
Ultra-precision diamond grinding of vapour cells in silicon for quantum technology
We present the use of computer numerical control (CNC) diamond machining with an ultra-precision milling/grinding system to manufacture alkali vapour cells at wafer-scale for quantum technologies. Fabricated cells were loaded with rubidium, bonded under vacuum, and tested in an absorption spectroscopy setup. The results are comparable to similar cells produced via chemical wet etching. Compared to a cleanroom-based chemical etching process, CNC machining can offer a cheaper, more environmentally sustainable route to manufacture of these devices. It also enables rapid prototyping and adjustments to design, whilst simultaneously allowing for scaling to volume production.
- 1 January 2026
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 36 (1) , 015005
Open AccessUltra-precision diamond grinding of vapour cells in silicon for quantum technology
We present the use of computer numerical control (CNC) diamond machining with an ultra-precision milling/grinding system to manufacture alkali vapour cells at wafer-scale for quantum technologies. Fabricated cells were loaded with rubidium, bonded under vacuum, and tested in an absorption spectroscopy setup. The results are comparable to similar cells produced via chemical wet etching. Compared to a cleanroom-based chemical etching process, CNC machining can offer a cheaper, more environmentally sustainable route to manufacture of these devices. It also enables rapid prototyping and adjustments to design, whilst simultaneously allowing for scaling to volume production.
- Open Access
- 14 November 2025
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 15 (12) , 3172
Investigating the stable ductile grinding regime for optical processing using a dicing saw
Ductile grinding on a dicing saw is a viable technique for producing optical waveguides and facets in brittle materials, particularly commercially produced lithium niobate waveguides. However, to date, the literature has focused on empirically defined parameters with little investigation of the grinding dynamics. In this study, we first review the formation of lithium niobate waveguides using a dicing saw to determine what parameters the community is employing. We then perform a series of grinding experiments to explore key process parameters, e.g., cut depth and feed rate, in optical quality grinding of lithium niobate. This work is the first large-distance grinding investigation in this important material. Our literature review shows that the optical dicing community normally finds that optical quality is easy to achieve in ductile mode, though the dynamics of this process are not well defined. However, our work shows that processing speed is limited by the blade wear rate prior to a significant roughness increase. We propose a blade wear-rate transition within the ductile regime, which can be approached by cut depth or feed-rate adjustment. Finding the blade wear-rate transition point provides optimal parameters to maximise throughput with minimal blade wear for the highest manufacturing efficiency.
- 14 November 2025
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 15 (12) , 3172
Open AccessInvestigating the stable ductile grinding regime for optical processing using a dicing saw
Ductile grinding on a dicing saw is a viable technique for producing optical waveguides and facets in brittle materials, particularly commercially produced lithium niobate waveguides. However, to date, the literature has focused on empirically defined parameters with little investigation of the grinding dynamics. In this study, we first review the formation of lithium niobate waveguides using a dicing saw to determine what parameters the community is employing. We then perform a series of grinding experiments to explore key process parameters, e.g., cut depth and feed rate, in optical quality grinding of lithium niobate. This work is the first large-distance grinding investigation in this important material. Our literature review shows that the optical dicing community normally finds that optical quality is easy to achieve in ductile mode, though the dynamics of this process are not well defined. However, our work shows that processing speed is limited by the blade wear rate prior to a significant roughness increase. We propose a blade wear-rate transition within the ductile regime, which can be approached by cut depth or feed-rate adjustment. Finding the blade wear-rate transition point provides optimal parameters to maximise throughput with minimal blade wear for the highest manufacturing efficiency.
- Open Access
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 61 (1)
Investigation of SiO2 Cladding Application on Ta2O5 Films for Reduction of Delamination During Dicing
Tantalum pentoxide () is of interest in photonics due to its optical properties, including high non‐linear refractive index and low optical propagation losses. Here we investigate mechanical dicing parameters, including depth of cut and material feed rate, to produce optical quality facets in a multilayered platform. films were deposited through sputtering onto a silicon substrate with a 6 thermal oxide. cladding layers were applied using different techniques: HELIOS sputtering, PECVD, and PECVD with TEOS. These were then diced using the same parameters and observed via optical microscope and SEM to determine the most effective cladding. The applied using HELIOS showed the best adhesion during dicing, with no chipping or delamination.
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 61 (1)
Open AccessInvestigation of SiO2 Cladding Application on Ta2O5 Films for Reduction of Delamination During Dicing
Tantalum pentoxide () is of interest in photonics due to its optical properties, including high non‐linear refractive index and low optical propagation losses. Here we investigate mechanical dicing parameters, including depth of cut and material feed rate, to produce optical quality facets in a multilayered platform. films were deposited through sputtering onto a silicon substrate with a 6 thermal oxide. cladding layers were applied using different techniques: HELIOS sputtering, PECVD, and PECVD with TEOS. These were then diced using the same parameters and observed via optical microscope and SEM to determine the most effective cladding. The applied using HELIOS showed the best adhesion during dicing, with no chipping or delamination.
- Open Access
- 8 November 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (22) , 6461-6464
Holographically fabricated out-of-plane blazed gratings and channel waveguides in silica for integrated free-space beam delivery
Grating couplers are widely used in integrated optics to generate free-space beams and facilitate localized interactions with systems such as atom or ion traps. However, etched devices often exhibit small-scale inconsistencies; exacerbated by the high index contrast of the devices, this can lead to phase errors, limiting devices to a sub-millimeter scale. Here we present the first demonstration, to our knowledge, of tilted, out-of-plane blazed gratings in planar silica fabricated by UV inscription using a 213 nm laser. Our devices deliver collimated and focusing beams into free space from a waveguide input without the need for additional optics such as beam expanders.
- 8 November 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (22) , 6461-6464
Open AccessHolographically fabricated out-of-plane blazed gratings and channel waveguides in silica for integrated free-space beam delivery
Grating couplers are widely used in integrated optics to generate free-space beams and facilitate localized interactions with systems such as atom or ion traps. However, etched devices often exhibit small-scale inconsistencies; exacerbated by the high index contrast of the devices, this can lead to phase errors, limiting devices to a sub-millimeter scale. Here we present the first demonstration, to our knowledge, of tilted, out-of-plane blazed gratings in planar silica fabricated by UV inscription using a 213 nm laser. Our devices deliver collimated and focusing beams into free space from a waveguide input without the need for additional optics such as beam expanders.
- Open Access
- 30 March 2024
- Published by Wiley
Mechanical dicing of optical quality facets and waveguides in a Silicon Nitride platform.
We report a ductile dicing process for manufacturing optical-quality facets in a multi-layered silicon nitride platform without the need for polishing. A surface roughness (Sa) of 1.5 nm was achieved. This technique was extended to fabricate ridge waveguides, and the results and characterization are reported.
- 30 March 2024
- Published by Wiley
Open AccessMechanical dicing of optical quality facets and waveguides in a Silicon Nitride platform.
We report a ductile dicing process for manufacturing optical-quality facets in a multi-layered silicon nitride platform without the need for polishing. A surface roughness (Sa) of 1.5 nm was achieved. This technique was extended to fabricate ridge waveguides, and the results and characterization are reported.
- Open Access
- 27 February 2024
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 60 (5)
Mechanical dicing of optical quality facets and waveguides in a silicon nitride platform
The authors report a ductile dicing process for manufacturing optical‐quality facets in a multi‐layered silicon nitride platform without the need for polishing. A surface roughness (Sa) of 1.5 nm was achieved. This technique was extended to fabricate ridge waveguides, and the results and characterization are reported.
- 27 February 2024
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 60 (5)
Open AccessMechanical dicing of optical quality facets and waveguides in a silicon nitride platform
The authors report a ductile dicing process for manufacturing optical‐quality facets in a multi‐layered silicon nitride platform without the need for polishing. A surface roughness (Sa) of 1.5 nm was achieved. This technique was extended to fabricate ridge waveguides, and the results and characterization are reported.
- Open Access
- 26 January 2023
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 13 (2) , 495-503
Investigation into the writing dynamics of planar Bragg gratings using pulsed 213 nm radiation
We present the first substantive investigation into the photosensitivity response of planar-doped silica to pulsed 213 nm light. We look at the response over a broad range of fluences and average powers to identify suitable regimes for simultaneous waveguide and Bragg grating writing. Unlike previously reported work, we do not observe any clear evidence of a similar non-linear photosensitivity response in B/Ge doped silica. We discuss laser-induced damage, saturation of photosensitivity, and grating response. This paper presents writing regimes for small spot direct UV writing where the photosensitivity and grating response are optimum, thereby confirming the suitability of the fabrication approach for complex devices.
- 26 January 2023
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 13 (2) , 495-503
Open AccessInvestigation into the writing dynamics of planar Bragg gratings using pulsed 213 nm radiation
We present the first substantive investigation into the photosensitivity response of planar-doped silica to pulsed 213 nm light. We look at the response over a broad range of fluences and average powers to identify suitable regimes for simultaneous waveguide and Bragg grating writing. Unlike previously reported work, we do not observe any clear evidence of a similar non-linear photosensitivity response in B/Ge doped silica. We discuss laser-induced damage, saturation of photosensitivity, and grating response. This paper presents writing regimes for small spot direct UV writing where the photosensitivity and grating response are optimum, thereby confirming the suitability of the fabrication approach for complex devices.
- Open Access
- 22 April 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (16) , eabl6698
High coherence and low cross-talk in a tileable 3D integrated superconducting circuit architecture
We report high qubit coherence as well as low cross-talk and single-qubit gate errors in a superconducting circuit architecture that promises to be tileable to two-dimensional (2D) lattices of qubits. The architecture integrates an inductively shunted cavity enclosure into a design featuring nongalvanic out-of-plane control wiring and qubits and resonators fabricated on opposing sides of a substrate. The proof-of-principle device features four uncoupled transmon qubits and exhibits average energy relaxation times T 1 = 149(38) μs, pure echoed dephasing times T ϕ, e = 189(34) μs, and single-qubit gate fidelities F = 99.982(4)% as measured by simultaneous randomized benchmarking. The 3D integrated nature of the control wiring means that qubits will remain addressable as the architecture is tiled to form larger qubit lattices. Band structure simulations are used to predict that the tiled enclosure will still provide a clean electromagnetic environment to enclosed qubits at arbitrary scale.
- 22 April 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (16) , eabl6698
Open AccessHigh coherence and low cross-talk in a tileable 3D integrated superconducting circuit architecture
We report high qubit coherence as well as low cross-talk and single-qubit gate errors in a superconducting circuit architecture that promises to be tileable to two-dimensional (2D) lattices of qubits. The architecture integrates an inductively shunted cavity enclosure into a design featuring nongalvanic out-of-plane control wiring and qubits and resonators fabricated on opposing sides of a substrate. The proof-of-principle device features four uncoupled transmon qubits and exhibits average energy relaxation times T 1 = 149(38) μs, pure echoed dephasing times T ϕ, e = 189(34) μs, and single-qubit gate fidelities F = 99.982(4)% as measured by simultaneous randomized benchmarking. The 3D integrated nature of the control wiring means that qubits will remain addressable as the architecture is tiled to form larger qubit lattices. Band structure simulations are used to predict that the tiled enclosure will still provide a clean electromagnetic environment to enclosed qubits at arbitrary scale.
- Open Access
- 11 April 2022
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 61 (08) , 081802-12
Quantum entanglement demonstrator for public engagement
The Networked Quantum Information Technologies (NQIT) hub was one of the quantum hubs of the first round of the United Kingdom’s flagship scheme, bringing together academia, industry, and government. The Optical Engineering and Quantum Photonics Group at the University of Southampton’s Optoelectronics Research Centre has developed an interactive demonstrator of a key device within NQIT to bring quantum photonics technologies to a wider audience. The system was exhibited at the 2017 UK Quantum Showcase in London to an audience of industry and government. It also featured as part of the Quantum City stand at the 2018 Cheltenham Science Festival, one of the United Kingdom’s leading annual science events.
- 11 April 2022
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 61 (08) , 081802-12
Open AccessQuantum entanglement demonstrator for public engagement
The Networked Quantum Information Technologies (NQIT) hub was one of the quantum hubs of the first round of the United Kingdom’s flagship scheme, bringing together academia, industry, and government. The Optical Engineering and Quantum Photonics Group at the University of Southampton’s Optoelectronics Research Centre has developed an interactive demonstrator of a key device within NQIT to bring quantum photonics technologies to a wider audience. The system was exhibited at the 2017 UK Quantum Showcase in London to an audience of industry and government. It also featured as part of the Quantum City stand at the 2018 Cheltenham Science Festival, one of the United Kingdom’s leading annual science events.
- 1 January 2022
- Published by Optica Publishing Group
- p. BTu1A.3
2D Holographic Transmission Gratings UV Written in a Suspended Silica Membrane
Bragg gratings were written into planar doped-silica membranes with a 213nm laser. These were written over large areas using cylindrical lenses, and the resulting gratings and diffraction orders were investigated.
- 1 January 2022
- Published by Optica Publishing Group
- p. BTu1A.3
2D Holographic Transmission Gratings UV Written in a Suspended Silica Membrane
Bragg gratings were written into planar doped-silica membranes with a 213nm laser. These were written over large areas using cylindrical lenses, and the resulting gratings and diffraction orders were investigated.