KUKoki Urita

Koki Urita

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Koki Urita has a total of 114 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Controlling sub-nanometer pore-entrance size enables kinetic separation of Li+, Na+, and K+ in capacitive deionization

    by Takashi Ishida, Yasuyuki Yamane, Hiroo Notohara, Shotaro Hiraide, Isamu Moriguchi, Koki Urita


  • Open Access

    Enhanced Electric Double-Layer Capacitance of 1,10-Phenanthroline-Derived Mesoporous Carbon CMK-1 Electrodes via Selective Elimination of Pyridinic Nitrogen during Carbonization

    by Natsumi Takemori, Daiki Tanaka, Shunsuke Shimizu, Takeharu Yoshii, Hirotomo Nishihara, Koki Urita, Yoshihiro Kamimura, Yoshihiro Kubota, Satoshi Inagaki


  • Tuning carbon black surface morphology via controlled thermal treatment atmosphere

    by Koki Urita, Chiharu Urita, Hideki Tanaka, Fernando Vallejos-Burgos, Hiroo Notohara, Takuya Araki, Keiji Horio, Hiroshi Furukawa, Masayuki Yoshida, Isamu Moriguchi


  • Ambient pressure storage of high-density methane in nanoporous carbon coated with graphene

    by Shuwen Wang, Fernando Vallejos-Burgos, Ayumi Furuse, Hayato Otsuka, Miu Nagae, Yuma Kawamata, Tomonori Ohba, Hirofumi Kanoh, Koki Urita, Hiroo Notohara, et al.


  • Open Access

    Thermal Chemisorption and Reduction of Carbon Dioxide on UiO-66(Zr) and MIL-100(Fe)

    by Smita Takawane, Masatoshi Miyamoto, Atsushi Kondo, Koki Urita, Tomonori Ohba

    The continuous increase in global energy consumption has caused a considerable increase in CO2 emissions and environmental problems. To address these challenges, adsorbents and catalytic materials that can effectively reduce the CO2 levels in the atmosphere should be developed. Metal–organic frameworks (MOFs) have emerged as promising materials for CO2 capture owing to their high surface areas and tunable structures. Herein, the CO2 adsorption properties of MIL-100(Fe) and UiO-66(Zr) were investigated. Both MOFs exhibited excellent thermal stability and high CO2 adsorption capacities at 300 K, and they maintained good adsorption properties at 500 K compared to those of activated carbon fiber owing to their high adsorption potentials. A slight change in the UiO-66(Zr) structure and no change in the MIL-100(Fe) structure were observed under the CO2 atmosphere at 500 K. At that time, CO emissions and changes in the carboxyl and OCO functional groups were observed on MIL-100(Fe), suggesting a mechanism of CO2 reduction to CO on the bare Fe(II) sites. These findings confirm the potential of MOFs for the thermo-catalytic reduction of CO2 to achieve effective CO2 capture and conversion.


  • Open Access

    Enhanced O2 selectivity of carbon molecular sieves by electrochemical oxidation for air separation

    by Koki Urita, Takashi Ishida, Kaito Marubayashi, Hideki Tanaka, Miyu Hamasaki, Yasuyuki Yamane, Jin Miyawaki, Hiroo Notohara, Isamu Moriguchi


  • (Invited) Edlc Characterization of Carbon Electrodes with Micro to Narrow Mesopores

    by Koki Urita, Sota Takahama, Fernando Vallejos Burgos, Chiharu Urita, Hiroo Notohara, Isamu Moriguchi

    The capacitance of carbon electrodes on electric double-layer capacitors (EDLCs) is improved by controlling the pore structure to increase the surface area where the electric double-layer can form. Porous carbon electrodes with micropores and narrow mesopores, through which bare electrolyte ions can invade, exhibit a high capacitance [1-3]. Because the electrolyte ions exist as a solvated state with solvent molecules in the electrolyte solution, a desolvation process in pores is required to improve EDLC performance. The desolvation of electrolyte ions spontaneously occurs in certain pore structures. The unique phenomena in nanopores, which are different from those in the bulk phase, were reported in the 1990s [4-6]. One of the representative phenomena is called as "quasi-pressure effect," in which molecules introduced into the pore behave as if they were in a high-pressure field [7-9]. The abnormality in the carbon pores is caused by the strong interaction between the molecules and ions introduced into the pores and the carbon atoms forming the pore walls. Such a strong interaction may be a trigger for desolvation. Accordingly, the pore structure of carbon electrodes must be carefully evaluated to design an ideal porous structure that maximizes EDLC capacitance. Gas adsorption isotherm analysis is one of the techniques used to clarify the porous structure of carbon electrodes. Many analytical methods to determine the specific surface area and pore size distribution (PSD) of adsorption isotherms have been reported. However, the calculated values differed based on analytical methods. The PSD depends on the calculation theories and pore structure models to determine the theoretical adsorption isotherms, whose fitting with the experimental adsorption isotherm provides the PSD of the target porous carbons. Simple pore structures such as slit and cylinder structures have been widely used as pore models. Recently, a set of realistic three-dimensional porous structures was proposed as a model pore structure for porous carbons [10]. Such a realistic model is expected to be effective for evaluating the pore structures of carbon electrodes with micropores and narrow mesopores. On the other hand, it is also considered effective to select Mg ions, which are multivalent ions, as carriers to enhance capacitance. However, Mg ions have a higher solvation energy than Li ions: it is necessary to determine a suitable pore structure for Mg ions. In this study, we designed optimal porous structures of carbon electrodes by clarifying the electric double-layer formation of Li and Mg ions on micro-mesoporous carbons using electrochemical quartz crystal microbalance (EQCM) measurements, while comparing various pore structure determination methods for adsorption isotherms. Reference: [1] J. Chmiola, G. Yushin, Y. Gogotsi, C. Portet, P. Simon, P. L. Taberna, Science, 313, 1760-1763 (2006). [2] K. Urita, N. Ide, H. Furukawa, I. Moriguchi, ACS Nano, 8, 3614-3619 (2014). [3] K. Urita, C. Urita, K. Fujita, K. Horio, M. Yoshida, I. Moriguchi, Nanoscale, 29, 15643-15649 (2017). [4] S. Granick, Science 1991, 253, 1374-1379. [5]T. Iiyama, K. Nishikawa, T. Ohba, K. Kaneko, J. Phys. Chem., 99, 10075-10076 (1995). [6]L. D. Gelb, K. E. Gubbins, Rep. Prog. Phys., 62, 1573-1660 (1999). [7] J. Imai, M. Souma, S. Ozeki, T. Suzuki, K. Kaneko, J. Phys. Chem., 95, 9955-9960 (1991). [8]K. Urita, T. Fujimori, H. Notohara, I. Moriguchi, ACS Appl. Energy Mater., 1, 807-813 (2018). [9]Y. Komine, K. Urita, H. Notohara, I. Moriguchi, Chem. Lett., 51, 118-120 (2022). [10]F. Vallejos-Burgos, C. de Tomas, N. J. Corrente, K. Urita, S. Wang, C. Urita, I. Moriguchi, I. Suarez-Martinez, N. Marks, M. H. Krohn, R. Kukobat, A. V. Neimark, Y. Gogotsi, and K. Kaneko, Carbon, 215, 118431 (2023).

  • Direct Tracking of SnO2-Li+ Reactions in Confined Carbon Nanospace

    by Hiroo Notohara, Koki Urita, Isamu Moriguchi

    SnO2 has a high theoretical capacity of 1492 mAh/g-SnO2 by (1) a conversion reaction and (2) an alloying-dealloying reaction, described as follows: SnO2 + 4 Li+ + 4 e- ⇌ Sn + 2 Li2O (1) Sn + 4.4 Li+ + 4.4 e- ⇌ Li4.4Sn (2) However, the fact of the matter is that the SnO2 electrode hardly exhibits such high capacity due to poor reversibility of lithiation and delithiation reactions. The irreversibility is largely a result of an aggregation of Sn metal particles in Li2O matrix through the lithiation and delithiation reactions.[1] The coarsening of Sn in Li2O matrix reduces the interface area for the reverse conversion reaction and leads large void in the Li2O matrix at the delithiation process.[2] The prevention of Sn coarsening is critical for improving the reversibility of the conversion reaction. The nanosizing of SnO2 and the confinement of reaction spaces were especially effective to improve the reversibility of the conversion reaction.[3] However, the effects on the phase change of SnO2 in sub-nanometer space have not been clarified. It is important to understand the mechanisms that provide high reversibility to maximize the performance of rechargeable batteries. In this study, we present the lithiation and delithiation reactivity and structural changes of SnO2 confined in sub-nanometer space using the inside space of single-walled carbon nanotubes (SWCNT). The SnO2-loaded SWCNT composite (SnO2@CNTs) was obtained by rinsing with water after introducing SnCl2 vapor into the SWCNT.[4] Charge-discharge characteristics of SnO2@CNTs were evaluated in the coin-type cells using Li metal counter and 1 M LiFP6 in EC-DMC electrolyte. The structural changes in the SnO2@CNTs during charge-discharge were evaluated using ex situ and in situ scanning transmission electron microscope (STEM) observations. In situ STEM observations were performed using a probe-type in situ TEM holder; a metal Li foil with an oxidized surface was used as the counter electrode, and SnO2@CNTs were used as the working electrode. The counter and working electrodes were contacted in the TEM column, and in situ TEM observations were conducted during the charging and discharging processes of the SnO2@CNTs. Structural characterization showed that SnO2 nanocrystals were loaded within the inner space of the SWCNTs. A small amount of SnO2 particles was loaded onto the SWCNT bundle surfaces. The ex situ STEM observations clearly show that reversible lithiation and delithiation of the SnO2 electrode were achieved in the carbon nanospaces. In contrast, the SnO2 particles on the outer surface of the SWCNTs changed to large Sn particles after the initial delithiation process, indicating that the reverse conversion reaction of SnO2 particles on the surface of SWCNTs is irreversible. To investigate the dynamics of the reversible SnO2 and Li-ion reactions in the SWCNTs, in situ STEM observations were performed. SnO2 particles in the carbon nanospace expanded into the carbon pores during the lithiation process. The LixSn and Li2O phases produced in the conversion reaction had domains of approximately 1 nm. Aggregation of Sn and LixSn particles did not occur as in the bulk material, and the aggregation of Sn particles was less likely to occur in the carbon nanospace. In the delithiation process, the LixSn and Li2O phases were converted back to SnO2 particles. The results of our study showed the morphological reversibility of SnO2 electrode was achieved by the nano-confinement against SnO2 in sub-nm space and leaded the reversibility of lithiation and delithiation reactions.[5] [1] S. Nam, S. Kim, S. Wi, H. Choi, S. Byun, S.-M. Choi, S.-I. Yoo, K. T. Lee, B. Park, J. Power Sources 2012, 211, 154-160. [2] R. Hu, H. Zhang, Z. Lu, J. Liu, M. Zeng, L. Yang, B. Yuan, M. Zhu, Nano Energy 2018, 45, 255-265. [3] J. Han, D. Kong, W. Lv, D.-M. Tang, D. Han, C. Zhang, D. Liu, Z. Xiao, X. Zhang, J. Xiao, X. He, F.-C. Hsia, C. Zhang, Y. Tao, D. Golberg, F. Kang, L. Zhi, Q.-H. Yang, Nat. Commun. 2018, 9, 402. [4] S. Oro, K. Urita, I. Moriguchi, Chem. Commun. 2014, 50, 7143-7146. [5] H. Notohara, K. Urita, I. Moriguchi, ACS Applied Materials & Interfaces 2023, 15, 30600-30605.

  • Application of prelithiated nanoporous carbon anode for high-power lithium-ion capacitor

    by Jugo Okabe, Hiroo Notohara, Koki Urita, Isamu Moriguchi

    Prelithiated nanoporous carbons were applied as an anode material in lithium-ion capacitors to achieve high-power performance. Nanoporous carbon anodes with different pore structures, graphitization degrees, and prelithiation conditions were comparatively investigated for their rate performance, self-discharge property, and full-cell performance. Prelithiated nanoporous carbon anode prepared under optimized condition exhibited high power and energy densities.