Zixuan Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zixuan Wang has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Zhikuang Cai
Nanjing University of Posts and Telecommunications
10 shared publications - Yufeng Guo
Nanjing University of Posts and Telecommunications
6 shared publications - Shanwen Hu
Nanjing University of Posts and Telecommunications,College of Integrated Circuit Science and Engineering,Nanjing,China
5 shared publications - Ka-Meng Lei
University of Macau
2 shared publications - Mingmin Shi
National and Local Joint Engineering Laboratory of RF Integration and Micro-Assembly Technology, College of Electronic and Optical Engineering & College of Microelectronics, Nanjing University of Posts and Telecommunications, Nanjing 210023, China
2 shared publications - Pui-In Mak
University of Macau
2 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6962-6968
A TID-Hardened DDSCR With a Segmented NBL and Embedded Floating P+ Regions for ESD Protection in High-Voltage Space Applications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6962-6968
A TID-Hardened DDSCR With a Segmented NBL and Embedded Floating P+ Regions for ESD Protection in High-Voltage Space Applications
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-14
A 24-MHz Crystal Oscillator With 6.9- μ s Startup Time and 2% Injection-Δ F Tolerance Using Phase-Interpolator-Assisted Synchronized Injection
This article presents a 24-MHz fast startup crystal oscillator (XO) with a phase-interpolator-assisted synchronized injection technique. The technique ensures phase consistency between the injection source and the crystal resonance, even with a 2% injection- $\Delta F$ , enhancing the robustness of the startup under different PVT conditions. Additionally, we propose a differential peak detection technique to detect the phase error incurred by $\Delta F$ . Such a peak detection technique shortens the auxiliary non-injection period during startup to merely four cycles, thereby maximizing the injection percentage to 97.4% and enhancing the startup’s efficacy. Fabricated in the 40-nm CMOS process, the XO achieves a 6.9- $\mu $ s startup time (166 cycles) with a startup energy of 4.8 nJ under a 1-V $V_{\text {DD}}$ . Furthermore, the startup time varies by ±4.4%, ±3.6%, and ±5.1% (worst case) over $\Delta F$ (0.25% to 2%), temperature (−40 to $85~^{\circ }$ C), and $V_{DD}$ (0.95 to 1.05 V) variations, respectively. The XO’s phase noise in the steady-state is −137.8dBc/Hz at the 1-kHz offset, with a power consumption of $63~\mu $ W.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-14
A 24-MHz Crystal Oscillator With 6.9- μ s Startup Time and 2% Injection-Δ F Tolerance Using Phase-Interpolator-Assisted Synchronized Injection
This article presents a 24-MHz fast startup crystal oscillator (XO) with a phase-interpolator-assisted synchronized injection technique. The technique ensures phase consistency between the injection source and the crystal resonance, even with a 2% injection- $\Delta F$ , enhancing the robustness of the startup under different PVT conditions. Additionally, we propose a differential peak detection technique to detect the phase error incurred by $\Delta F$ . Such a peak detection technique shortens the auxiliary non-injection period during startup to merely four cycles, thereby maximizing the injection percentage to 97.4% and enhancing the startup’s efficacy. Fabricated in the 40-nm CMOS process, the XO achieves a 6.9- $\mu $ s startup time (166 cycles) with a startup energy of 4.8 nJ under a 1-V $V_{\text {DD}}$ . Furthermore, the startup time varies by ±4.4%, ±3.6%, and ±5.1% (worst case) over $\Delta F$ (0.25% to 2%), temperature (−40 to $85~^{\circ }$ C), and $V_{DD}$ (0.95 to 1.05 V) variations, respectively. The XO’s phase noise in the steady-state is −137.8dBc/Hz at the 1-kHz offset, with a power consumption of $63~\mu $ W.
- 18 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 403-406
A Compact 2.45-/5.8-GHz Dual-Band RF Energy Harvesting Front-End With On-Chip IMN
This letter proposes a fully integrated on-chip dual-band RF energy harvesting (RFEH) front-end based on 0.15- $\mu $ m pHEMT GaAs technology. To realize a flexible design of dual-band RFEH front-end, a T-shape-like impedance matching network (IMN) with two symmetric series–parallel $LC$ networks is proposed. An odd–even-mode analysis theory for symmetrical T-type IMN is introduced, enabling rapid construction of dual-band IMN. Since the frequency bands in both modes remain mutually unaffected, this approach significantly reduces dual-band iteration time. A highly efficient dual-band GaAs on-chip RFEH front-end operating at 2.4 and 5.8 GHz was fabricated with a chip area of only $700\times 700~\mu \text {m}^{2}$ . Measurements validate the RFEH front-end achieves a peak power conversion efficiency (PCE) of 64.3% and 40.8% at 2.4 and 5.8 GHz, respectively, with 19 dBm of input power level (Pin) and 2.2-k $\Omega $ load resistive (RL).
- 18 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 403-406
A Compact 2.45-/5.8-GHz Dual-Band RF Energy Harvesting Front-End With On-Chip IMN
This letter proposes a fully integrated on-chip dual-band RF energy harvesting (RFEH) front-end based on 0.15- $\mu $ m pHEMT GaAs technology. To realize a flexible design of dual-band RFEH front-end, a T-shape-like impedance matching network (IMN) with two symmetric series–parallel $LC$ networks is proposed. An odd–even-mode analysis theory for symmetrical T-type IMN is introduced, enabling rapid construction of dual-band IMN. Since the frequency bands in both modes remain mutually unaffected, this approach significantly reduces dual-band iteration time. A highly efficient dual-band GaAs on-chip RFEH front-end operating at 2.4 and 5.8 GHz was fabricated with a chip area of only $700\times 700~\mu \text {m}^{2}$ . Measurements validate the RFEH front-end achieves a peak power conversion efficiency (PCE) of 64.3% and 40.8% at 2.4 and 5.8 GHz, respectively, with 19 dBm of input power level (Pin) and 2.2-k $\Omega $ load resistive (RL).
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (11) , 3780-3790
A 16-MHz Crystal Oscillator With 17.5- μ s Start-Up Time Under 104-ppm- Δ F Injection Using Automatic Phase-Error Correction
Fast start-up crystal oscillators (XOs) based on energy injection with an auxiliary oscillator (AO) are efficacious in improving the energy consumption of duty-cycled the Internet of Things (IoT) devices. Nonetheless, the frequency mismatch ( ${\Delta } {F}$ ) between the injection frequency and the crystal’s resonance frequency restrains the injection efficiency and start-up improvement. This work presents an automatic phase-error correction (APEC) technique for automatically correcting the phase error incurred due to ${\Delta } {F}$ up to $10{^{4}}$ ppm and safeguarding the XO start-up performance. An inflection detector (ID) based on a dynamic comparator (DCMP) traces the crystal resonant signal’s peak points and selects the appropriate signals for injection. We fabricated the proposed fast start-up XO in a 40-nm CMOS process. It achieves a start-up time of $17.5~{\mu }$ s with a 16-MHz crystal and a 1.0-V ${V} {_{\text {DD}}}$ . Furthermore, the start-up time only varies by ±1.42% over a ${\Delta } {F}$ of ${\pm } 10{^{4}}$ ppm, and ±4.5% amid temperature variations (−40°C to $85~{^{\circ }}$ C), evincing the robustness of the proposed technique. The power consumption and phase noise in the steady state are $84~{\mu }$ W and −139 dBc/Hz at 1-kHz offset, respectively.
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (11) , 3780-3790
A 16-MHz Crystal Oscillator With 17.5- μ s Start-Up Time Under 104-ppm- Δ F Injection Using Automatic Phase-Error Correction
Fast start-up crystal oscillators (XOs) based on energy injection with an auxiliary oscillator (AO) are efficacious in improving the energy consumption of duty-cycled the Internet of Things (IoT) devices. Nonetheless, the frequency mismatch ( ${\Delta } {F}$ ) between the injection frequency and the crystal’s resonance frequency restrains the injection efficiency and start-up improvement. This work presents an automatic phase-error correction (APEC) technique for automatically correcting the phase error incurred due to ${\Delta } {F}$ up to $10{^{4}}$ ppm and safeguarding the XO start-up performance. An inflection detector (ID) based on a dynamic comparator (DCMP) traces the crystal resonant signal’s peak points and selects the appropriate signals for injection. We fabricated the proposed fast start-up XO in a 40-nm CMOS process. It achieves a start-up time of $17.5~{\mu }$ s with a 16-MHz crystal and a 1.0-V ${V} {_{\text {DD}}}$ . Furthermore, the start-up time only varies by ±1.42% over a ${\Delta } {F}$ of ${\pm } 10{^{4}}$ ppm, and ±4.5% amid temperature variations (−40°C to $85~{^{\circ }}$ C), evincing the robustness of the proposed technique. The power consumption and phase noise in the steady state are $84~{\mu }$ W and −139 dBc/Hz at 1-kHz offset, respectively.
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 240-245
A High-Precision Delay Faults Testing Technique Based on the Improved DWR Structure
Aiming at the challenge of testing delay faults in through silicon via (TSV) of Chiplets, a high-precision delay faults testing technique based on the improved die wrapper register (DWR) is proposed. Relying on time-to-digital converter (TDC) embedded in the original DWR, transitional signal is propagated in delay chains and conversed into a digital signal to observe whether there is the delay fault. The double delay chains are constructed by two kinds of XOR gates with different delays. The conversion with high precision is achieved by dividing the transition signal into continuous small time-intervals. With the improved test access port controller (TAPC) circuit, the time to configure effective test path is greatly reduced and the delay test can be realized without additional external interfaces. The simulation results demonstrate that delay faults can be detected within the precision of 11.246ps and the time of test configuration is reduced.
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 240-245
A High-Precision Delay Faults Testing Technique Based on the Improved DWR Structure
Aiming at the challenge of testing delay faults in through silicon via (TSV) of Chiplets, a high-precision delay faults testing technique based on the improved die wrapper register (DWR) is proposed. Relying on time-to-digital converter (TDC) embedded in the original DWR, transitional signal is propagated in delay chains and conversed into a digital signal to observe whether there is the delay fault. The double delay chains are constructed by two kinds of XOR gates with different delays. The conversion with high precision is achieved by dividing the transition signal into continuous small time-intervals. With the improved test access port controller (TAPC) circuit, the time to configure effective test path is greatly reduced and the delay test can be realized without additional external interfaces. The simulation results demonstrate that delay faults can be detected within the precision of 11.246ps and the time of test configuration is reduced.
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 350-354
Design of a Broadband Miniaturized Filter Power Amplifiers
In order to meet the application requirements of RF front-end circuit integration, miniaturization and high efficiency, compared with the traditional concept of direct cascading of power amplifier and filter, this paper proposes a design method of co-designing high out-of-band rejection filter and power amplifier matching network, which matches the input impedance of the filter directly to the optimal output impedance of the drain of the output stage of the power amplifier, so that the filter network has both filtering and impedance transformation functions. By matching the input impedance of the filter directly to the optimal output impedance of the drain of the power amplifier output stage, the filter network here not only has the function of filtering but also has the function of impedance transformation. In order to verify the effectiveness and practicality of the method, a broadband miniaturized filtered power amplifier with integrated filtering characteristics is designed to operate in the 14-18 GHz satellite communication band by taking advantage of the high output power of GaAs pHEMT devices. Simulation results show that, under the premise of maximizing the output power and efficiency of the power amplifier, the gain is up to 23 dB, the input and output returns are below -15 dB, the minimum power added efficiency is 46%, the suppression of out-of-band signals reaches -30 dB, and the power suppression of the high harmonics reaches -50 dBc, which is a great improvement compared with the out-of-band suppression of conventional power amplifiers.
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 350-354
Design of a Broadband Miniaturized Filter Power Amplifiers
In order to meet the application requirements of RF front-end circuit integration, miniaturization and high efficiency, compared with the traditional concept of direct cascading of power amplifier and filter, this paper proposes a design method of co-designing high out-of-band rejection filter and power amplifier matching network, which matches the input impedance of the filter directly to the optimal output impedance of the drain of the output stage of the power amplifier, so that the filter network has both filtering and impedance transformation functions. By matching the input impedance of the filter directly to the optimal output impedance of the drain of the power amplifier output stage, the filter network here not only has the function of filtering but also has the function of impedance transformation. In order to verify the effectiveness and practicality of the method, a broadband miniaturized filtered power amplifier with integrated filtering characteristics is designed to operate in the 14-18 GHz satellite communication band by taking advantage of the high output power of GaAs pHEMT devices. Simulation results show that, under the premise of maximizing the output power and efficiency of the power amplifier, the gain is up to 23 dB, the input and output returns are below -15 dB, the minimum power added efficiency is 46%, the suppression of out-of-band signals reaches -30 dB, and the power suppression of the high harmonics reaches -50 dBc, which is a great improvement compared with the out-of-band suppression of conventional power amplifiers.
- Open Access
- 25 June 2021
- Published by MDPI AG in Electronics
- Vol. 10 (13) , 1542
A Pipeline-TDC-Based CMOS Temperature Sensor with a 48 fJ·K2 Resolution FoM
An energy-efficient temperature sensor is important for temperature monitoring in Biomedical Internet-of-things (BIoT) applications. This article presents a time-domain temperature sensor with a pipeline time-to-digital converter (TDC). A programmable-gain time amplifier (PGTA) with high linearity and wide linear range is proposed to improve the resolution of the sensor and to reduce the chip area. The conversion time of the sensor is reduced by the fast TDC that only needs ~26 ns/conversion, which means the sensor is suitable for BIoT applications that commonly use duty cycling mode. Fabricated in a 40 nm standard CMOS technology, the sensor consumes 7.6 μA at a 0.6 V supply and achieves a resolution of 90 mK and a sensitivity of 0.62%/°C in a 1.3 μs conversion time. This translates into a resolution figure-of-merit of 48 fJ·K2. The sensor achieves an inaccuracy of 0.39 °C from −20 °C to 80 °C after two-point calibration. Duty cycling the sensor results in an even lower average power: ~18.6 nW at 10 conversions/s.
- 25 June 2021
- Published by MDPI AG in Electronics
- Vol. 10 (13) , 1542
Open AccessA Pipeline-TDC-Based CMOS Temperature Sensor with a 48 fJ·K2 Resolution FoM
An energy-efficient temperature sensor is important for temperature monitoring in Biomedical Internet-of-things (BIoT) applications. This article presents a time-domain temperature sensor with a pipeline time-to-digital converter (TDC). A programmable-gain time amplifier (PGTA) with high linearity and wide linear range is proposed to improve the resolution of the sensor and to reduce the chip area. The conversion time of the sensor is reduced by the fast TDC that only needs ~26 ns/conversion, which means the sensor is suitable for BIoT applications that commonly use duty cycling mode. Fabricated in a 40 nm standard CMOS technology, the sensor consumes 7.6 μA at a 0.6 V supply and achieves a resolution of 90 mK and a sensitivity of 0.62%/°C in a 1.3 μs conversion time. This translates into a resolution figure-of-merit of 48 fJ·K2. The sensor achieves an inaccuracy of 0.39 °C from −20 °C to 80 °C after two-point calibration. Duty cycling the sensor results in an even lower average power: ~18.6 nW at 10 conversions/s.
- Open Access
- 24 April 2020
- Published by MDPI AG in Electronics
- Vol. 9 (4) , 697
A 2.4 GHz 2.9 mW Zigbee RF Receiver with Current-Reusing and Function-Reused Mixing Techniques
This study presents a low-power Zigbee receiver with a current-reusing structure and function-reused mixing techniques. To reduce the overall power consumption, a low noise amplifier (LNA) and a power amplifier (PA) share the biasing current with a voltage-controlled oscillator (VCO) in the receiving (RX) mode and transmitting (TX) mode, respectively. The function-reused mixer reuses the radio frequency trans-conductance (RF gm) stage to amplify the down-converted intermediate frequency (IF) signal, obtaining a free IF gain without extra power consumption. A peak detector circuit detects the receiving signal strength and auto-adjusts the biasing current to save power when a strong signal strength is detected. Meanwhile, the peak detector helps to provide a coarse gain control as part of the auto-gain-control function. As part of the IF gain range is shared by the multiple-feedback (MFB) low-pass filter, the number of programmable-gain IF amplifier stages can be reduced, which also means a decrease in power consumption. A prototype of this wireless sensor network (WSN) receiver was designed and fabricated using the TSMC 130 nm CMOS process under a supply voltage of 1 V. The entire receiver realizes a noise figure (NF) of 3.5 dB and a receiving sensitivity of −90 dBm for the 0.25 Mbps offset quadrature phase shift keying (O-QPSK) signal with a power consumption of 2.9 mW.
- 24 April 2020
- Published by MDPI AG in Electronics
- Vol. 9 (4) , 697
Open AccessA 2.4 GHz 2.9 mW Zigbee RF Receiver with Current-Reusing and Function-Reused Mixing Techniques
This study presents a low-power Zigbee receiver with a current-reusing structure and function-reused mixing techniques. To reduce the overall power consumption, a low noise amplifier (LNA) and a power amplifier (PA) share the biasing current with a voltage-controlled oscillator (VCO) in the receiving (RX) mode and transmitting (TX) mode, respectively. The function-reused mixer reuses the radio frequency trans-conductance (RF gm) stage to amplify the down-converted intermediate frequency (IF) signal, obtaining a free IF gain without extra power consumption. A peak detector circuit detects the receiving signal strength and auto-adjusts the biasing current to save power when a strong signal strength is detected. Meanwhile, the peak detector helps to provide a coarse gain control as part of the auto-gain-control function. As part of the IF gain range is shared by the multiple-feedback (MFB) low-pass filter, the number of programmable-gain IF amplifier stages can be reduced, which also means a decrease in power consumption. A prototype of this wireless sensor network (WSN) receiver was designed and fabricated using the TSMC 130 nm CMOS process under a supply voltage of 1 V. The entire receiver realizes a noise figure (NF) of 3.5 dB and a receiving sensitivity of −90 dBm for the 0.25 Mbps offset quadrature phase shift keying (O-QPSK) signal with a power consumption of 2.9 mW.
- Open Access
- 11 February 2020
- Published by MDPI AG in Electronics
- Vol. 9 (2) , 313
A Compact UWB Bandpass Chip Filter on a GaAs Substrate with Modified Chebyshev Structure
Ultra-Wideband (UWB) systems are widely used in low-power, high-speed, high-security short-range wireless communication systems throughout digital homes and offices. In the RF front-end of a UWB system, bandpass filters (BPFs) are used to put through the passband signals and reject the stopband signals. Most UWB BPFs are designed with dielectric materials on circuit boards or LTCC technology. In this paper, a very compact fully integrated UWB chip filter is proposed and designed on a GaAs substrate with nitride as dielectric layers to meet the small size requirement of portable devices for next-generation UWB applications. The filter is constructed with a modified Chebyshev structure. The final filter circuit contains only four inductors instead of six for the conventional Chebyshev filter, which makes the chip more compact and cost effective. The filter is designed and fabricated on a 0.25 μm GaAs pHEMT technology with a chip size of only 0.73 mm × 0.51 mm including the chip edge and scribe line area, while the filter core area is only 0.61 mm × 0.39 mm, including bonding PADs. The measurement results illustrated that the proposed BPF shows a passband covering the frequency range of 3.1–9.0 GHz, the minimum passband insertion loss is only 1.5 dB, the stopband rejection is better than −30 dB throughout frequencies below 2 GHz and above 12 GHz, S11 is less than −16 dB, and S22 is better than −11 dB during the whole passband range. It demonstrated that the proposed filter can be considered as one of the most compact UWB filters.
- 11 February 2020
- Published by MDPI AG in Electronics
- Vol. 9 (2) , 313
Open AccessA Compact UWB Bandpass Chip Filter on a GaAs Substrate with Modified Chebyshev Structure
Ultra-Wideband (UWB) systems are widely used in low-power, high-speed, high-security short-range wireless communication systems throughout digital homes and offices. In the RF front-end of a UWB system, bandpass filters (BPFs) are used to put through the passband signals and reject the stopband signals. Most UWB BPFs are designed with dielectric materials on circuit boards or LTCC technology. In this paper, a very compact fully integrated UWB chip filter is proposed and designed on a GaAs substrate with nitride as dielectric layers to meet the small size requirement of portable devices for next-generation UWB applications. The filter is constructed with a modified Chebyshev structure. The final filter circuit contains only four inductors instead of six for the conventional Chebyshev filter, which makes the chip more compact and cost effective. The filter is designed and fabricated on a 0.25 μm GaAs pHEMT technology with a chip size of only 0.73 mm × 0.51 mm including the chip edge and scribe line area, while the filter core area is only 0.61 mm × 0.39 mm, including bonding PADs. The measurement results illustrated that the proposed BPF shows a passband covering the frequency range of 3.1–9.0 GHz, the minimum passband insertion loss is only 1.5 dB, the stopband rejection is better than −30 dB throughout frequencies below 2 GHz and above 12 GHz, S11 is less than −16 dB, and S22 is better than −11 dB during the whole passband range. It demonstrated that the proposed filter can be considered as one of the most compact UWB filters.