Valdir Soldi
Valdir Soldi has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Alexandre Luis Parize
Polimat, Grupo de Estudos em Materiais Poliméricos, Departamento de Química, Universidade Federal de Santa Catarina, Florianópolis, SC 88040-900, Brazil
2 shared publications - Edvani Curti Muniz
Graduate Program in Materials Science and Engineering, Federal University of Piauí, Teresina 64049-550, Brazil
2 shared publications - Idejan Padilha Gross
Laboratory of Food, Drugs, and Cosmetics (LTMAC), University of Brasilia, Brasília, Brazil
2 shared publications - Issei Otsuka
Univ. Grenoble Alpes, CNRS, Cermav, Grenoble 38000, France
2 shared publications - Karine Modolon Zepon
Universidade do Sul de Santa Catarina
2 shared publications Redouane Borsali
Centre de Recherches sur les Macromolécules Végétales, France
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 36 (1)
Cotton textile with citronella nanoparticles: antimicrobial properties and surface functionalization strategies
The development of functional textiles offers wide-ranging applications, with nanoencapsulation of essential oils emerging as a promising strategy for antimicrobial purposes. This study focused on biodegradable nanoparticles loaded with citronella essential oil (CEO), deposited on cotton textiles using three methods, with or without non-thermal plasma (NTP) treatment. The immersion method achieved the highest CEO content per textile area (5.9 µL cm -2). XPS and FT-IR analyses revealed that NTP treatment enhanced the hydrophilic functional groups through oxidation, as confirmed by contact angle assays and textile mass loss. Despite these changes, NTP treatment did not significantly alter the in vitro release profile of the CEO. Non-treated NTP samples were tested against S. aureus and P. aeruginosa, showing a stronger antibacterial effect against gram-positive S. aureus. These findings highlight the potential of these materials for use as functional antibacterial textiles with promising applications in health and hygiene products.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 36 (1)
Open AccessCotton textile with citronella nanoparticles: antimicrobial properties and surface functionalization strategies
The development of functional textiles offers wide-ranging applications, with nanoencapsulation of essential oils emerging as a promising strategy for antimicrobial purposes. This study focused on biodegradable nanoparticles loaded with citronella essential oil (CEO), deposited on cotton textiles using three methods, with or without non-thermal plasma (NTP) treatment. The immersion method achieved the highest CEO content per textile area (5.9 µL cm -2). XPS and FT-IR analyses revealed that NTP treatment enhanced the hydrophilic functional groups through oxidation, as confirmed by contact angle assays and textile mass loss. Despite these changes, NTP treatment did not significantly alter the in vitro release profile of the CEO. Non-treated NTP samples were tested against S. aureus and P. aeruginosa, showing a stronger antibacterial effect against gram-positive S. aureus. These findings highlight the potential of these materials for use as functional antibacterial textiles with promising applications in health and hygiene products.
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 26 (1)
Atividade antibacteriana de fibras têxteis contendo nanopartículas de poli (óxido de etileno-b-ácido lático) com óleos essenciais incorporados
RESUMO Neste estudo foi avaliada a atividade antibacteriana de fibras têxteis contendo nanopartículas de poli(óxido de etileno-b-ácido lático) com óleos essenciais incorporados. O sistema desenvolvido demonstrou atividade antibacteriana contra Staphylococcus aureus, sugerindo seu potencial uso como agente antibacteriano. Foram utilizados copolímeros dibloco baseados em um bloco fixo de PEO (5kDa) e dois segmentos de PLA diferentes (4,5 e 10kDa). A morfologia, a eficiência do encapsulamento, a interação da blenda de óleos essenciais (incluindo, lavanda, melaleuca, tomilho, cravo, cedro e capim limão) e polímero e a cinética de liberação do agente ativo nas nanopartículas foram avaliadas. O raio hidrodinâmico das nanopartículas determinado pela dispersão da luz foi afetado pelo tamanho do bloco de poli(ácido lático). A liberação in vitro sugere que a barreira polimérica é capaz de controlar a liberação de óleo. A atividade antibacteriana foi mais eficaz em tecidos com fibras arranjadas aleatoriamente. De acordo com estudos da literatura, nanopartículas obtidas de copolímeros com menor massa molar de PLA favoreceram a liberação da mistura de óleos essenciais. O processo de incorporação dos óleos essenciais nas fibras têxteis mostrou-se eficiente sugerindo viabilidade quanto ao uso desse sistema no controle antibacteriano. Os sistemas desenvolvidos oferecem uma nova estratégia para a liberação controlada com atividade antibacteriana e apresentam potenciais aplicações na indústria calçadista.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 26 (1)
Open AccessAtividade antibacteriana de fibras têxteis contendo nanopartículas de poli (óxido de etileno-b-ácido lático) com óleos essenciais incorporados
RESUMO Neste estudo foi avaliada a atividade antibacteriana de fibras têxteis contendo nanopartículas de poli(óxido de etileno-b-ácido lático) com óleos essenciais incorporados. O sistema desenvolvido demonstrou atividade antibacteriana contra Staphylococcus aureus, sugerindo seu potencial uso como agente antibacteriano. Foram utilizados copolímeros dibloco baseados em um bloco fixo de PEO (5kDa) e dois segmentos de PLA diferentes (4,5 e 10kDa). A morfologia, a eficiência do encapsulamento, a interação da blenda de óleos essenciais (incluindo, lavanda, melaleuca, tomilho, cravo, cedro e capim limão) e polímero e a cinética de liberação do agente ativo nas nanopartículas foram avaliadas. O raio hidrodinâmico das nanopartículas determinado pela dispersão da luz foi afetado pelo tamanho do bloco de poli(ácido lático). A liberação in vitro sugere que a barreira polimérica é capaz de controlar a liberação de óleo. A atividade antibacteriana foi mais eficaz em tecidos com fibras arranjadas aleatoriamente. De acordo com estudos da literatura, nanopartículas obtidas de copolímeros com menor massa molar de PLA favoreceram a liberação da mistura de óleos essenciais. O processo de incorporação dos óleos essenciais nas fibras têxteis mostrou-se eficiente sugerindo viabilidade quanto ao uso desse sistema no controle antibacteriano. Os sistemas desenvolvidos oferecem uma nova estratégia para a liberação controlada com atividade antibacteriana e apresentam potenciais aplicações na indústria calçadista.
- 1 January 2020
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 31 (4) , 803-812
Chitosan-Sodium Alginate Polyelectrolyte Complex Coating Pluronic® F127 Nanoparticles Loaded with Citronella Essential Oil
- 1 January 2020
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 31 (4) , 803-812
Chitosan-Sodium Alginate Polyelectrolyte Complex Coating Pluronic® F127 Nanoparticles Loaded with Citronella Essential Oil
- 1 December 2016
- Published by Elsevier in Industrial Crops and Products
- Vol. 94, 454-462
Thermal characterization of cellulose nanocrystals isolated from sisal fibers using acid hydrolysis
- 1 December 2016
- Published by Elsevier in Industrial Crops and Products
- Vol. 94, 454-462
Thermal characterization of cellulose nanocrystals isolated from sisal fibers using acid hydrolysis
- Open Access
- 3 October 2016
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 19 (6) , 1356-1365
Preparation of Polymeric Micelles of Poly(Ethylene Oxide-b-Lactic Acid) and their Encapsulation With Lavender Oil
Nanoparticles comprised of the poly(ethylene oxide)-b-poly (lactic acid) diblock copolymer (PEO-b-PLA) with and without the incorporation of lavender oil were prepared by nanoprecipitation. Diblock copolymers based on a fixed PEO block (5KDa) and two different PLA segments (4.5 or 10KDa) were used. The morphology, encapsulation efficiency, essential oil-polymer interaction and the release kinetics of the active agent in the nanoparticles, were evaluated. The hydrodynamic radius of the nanoparticles determined by light scattering was affected by the size of the poly(lactic acid) (PLA) block. The lavender essential oil encapsulation efficiency (at a concentration of 0.4 µL mL-1) determined by UV-VIS spectroscopy was in the range of 70-75%. The in vitro release suggests that the polymeric barrier is able to control the oil release.
- 3 October 2016
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 19 (6) , 1356-1365
Open AccessPreparation of Polymeric Micelles of Poly(Ethylene Oxide-b-Lactic Acid) and their Encapsulation With Lavender Oil
Nanoparticles comprised of the poly(ethylene oxide)-b-poly (lactic acid) diblock copolymer (PEO-b-PLA) with and without the incorporation of lavender oil were prepared by nanoprecipitation. Diblock copolymers based on a fixed PEO block (5KDa) and two different PLA segments (4.5 or 10KDa) were used. The morphology, encapsulation efficiency, essential oil-polymer interaction and the release kinetics of the active agent in the nanoparticles, were evaluated. The hydrodynamic radius of the nanoparticles determined by light scattering was affected by the size of the poly(lactic acid) (PLA) block. The lavender essential oil encapsulation efficiency (at a concentration of 0.4 µL mL-1) determined by UV-VIS spectroscopy was in the range of 70-75%. The in vitro release suggests that the polymeric barrier is able to control the oil release.
- 27 April 2016
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 32 (18) , 4538-4545
Self-Assembly of Oligosaccharide-b-PMMA Block Copolymer Systems: Glyco-Nanoparticles and Their Degradation under UV Exposure
This paper discusses the self-assembly of oligosaccharide-containing block copolymer and the use of ultraviolet (UV) to obtain nano-porous glyco-nanoparticles by photo-degradation of the synthetic polymer block. Those glyco-nanoparticles consisting of oligosaccharide-based shell and a photo-degradable core domain were obtained from the self-assembly of maltoheptaose-block-poly(methyl methacrylate) (MH-b-PMMA48) using the nanoprecipitation protocol. MH-b-PMMA48 self-assembled into well-defined spherical micelles (major compound) with a hydrodynamic radius (Rh) of ca. 10 nm and also into large compound micellar aggregates (minor compound) with an Rh of ca. 65 nm. The oligosaccharide shells of these glyco-nanoparticles were cross-linked through the Michael-type addition of divinyl sulfone under dilute conditions to minimize the inter-micellar cross-linking. The core domain photo-degradation of the cross-linked glyco-nanoparticles was induced under exposure to 254 nm UV radiation, resulting in porous glyco-nanoparticles with an Rh of ca. 44 nm. The morphology of the cross-linked shell and the core photo-degradation of these glyco-nanoparticles were characterized using static light scattering (SLS), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (1H NMR), field emission gun-scanning electron microscopy (FEG-SEM), and transmission electron microscopy (TEM). The innovative aspect of this approach concerns the fact that after removing the PMMA domains, the porous nanoparticles are mostly composed of biocompatible and non-toxic oligosaccharides.
- 27 April 2016
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 32 (18) , 4538-4545
Self-Assembly of Oligosaccharide-b-PMMA Block Copolymer Systems: Glyco-Nanoparticles and Their Degradation under UV Exposure
This paper discusses the self-assembly of oligosaccharide-containing block copolymer and the use of ultraviolet (UV) to obtain nano-porous glyco-nanoparticles by photo-degradation of the synthetic polymer block. Those glyco-nanoparticles consisting of oligosaccharide-based shell and a photo-degradable core domain were obtained from the self-assembly of maltoheptaose-block-poly(methyl methacrylate) (MH-b-PMMA48) using the nanoprecipitation protocol. MH-b-PMMA48 self-assembled into well-defined spherical micelles (major compound) with a hydrodynamic radius (Rh) of ca. 10 nm and also into large compound micellar aggregates (minor compound) with an Rh of ca. 65 nm. The oligosaccharide shells of these glyco-nanoparticles were cross-linked through the Michael-type addition of divinyl sulfone under dilute conditions to minimize the inter-micellar cross-linking. The core domain photo-degradation of the cross-linked glyco-nanoparticles was induced under exposure to 254 nm UV radiation, resulting in porous glyco-nanoparticles with an Rh of ca. 44 nm. The morphology of the cross-linked shell and the core photo-degradation of these glyco-nanoparticles were characterized using static light scattering (SLS), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (1H NMR), field emission gun-scanning electron microscopy (FEG-SEM), and transmission electron microscopy (TEM). The innovative aspect of this approach concerns the fact that after removing the PMMA domains, the porous nanoparticles are mostly composed of biocompatible and non-toxic oligosaccharides.
- 1 February 2014
- Published by Elsevier in European Journal of Pharmaceutical Sciences
- Vol. 52, 165-172
Chitosan-decorated polystyrene-b-poly(acrylic acid) polymersomes as novel carriers for topical delivery of finasteride
- 1 February 2014
- Published by Elsevier in European Journal of Pharmaceutical Sciences
- Vol. 52, 165-172
Chitosan-decorated polystyrene-b-poly(acrylic acid) polymersomes as novel carriers for topical delivery of finasteride
- 13 July 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 128 (1) , 725-734
Development of dental resinous systems composed of bisphenol a ethoxylated dimethacrylate and three novel methacrylate monomers: Synthesis and characterization
Three novel monomers with a methacrylate unit, different chain lengths, and functional groups were synthesized and proposed as possible diluent monomers in dental resinous systems containing bisphenol A ethoxylated dimethacrylate (BisEMA) aiming at their use in dental resin mixtures. The monomers were mixed with BisEMA and photopolymerized in the presence of a photoinitiator system. The unfilled formulations were evaluated regarding their degree of conversion, thermal properties, Vickers microhardness, water sorption, water solubility, and surface morphology. The monomers presented a high conversion degree compared to control groups and have affected the glass transition temperature of the samples. Their hardness values were similar to or higher than the value found for the control group. The specimens evaluated presented a homogeneous matrix and stability throughout the water sorption and solubility tests. Considering their simplicity and effective application in synthesis, as well as the results obtained for the polymerized formulation groups, the new monomers presented here represent promising photocurable dental monomers. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- 13 July 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 128 (1) , 725-734
Development of dental resinous systems composed of bisphenol a ethoxylated dimethacrylate and three novel methacrylate monomers: Synthesis and characterization
Three novel monomers with a methacrylate unit, different chain lengths, and functional groups were synthesized and proposed as possible diluent monomers in dental resinous systems containing bisphenol A ethoxylated dimethacrylate (BisEMA) aiming at their use in dental resin mixtures. The monomers were mixed with BisEMA and photopolymerized in the presence of a photoinitiator system. The unfilled formulations were evaluated regarding their degree of conversion, thermal properties, Vickers microhardness, water sorption, water solubility, and surface morphology. The monomers presented a high conversion degree compared to control groups and have affected the glass transition temperature of the samples. Their hardness values were similar to or higher than the value found for the control group. The specimens evaluated presented a homogeneous matrix and stability throughout the water sorption and solubility tests. Considering their simplicity and effective application in synthesis, as well as the results obtained for the polymerized formulation groups, the new monomers presented here represent promising photocurable dental monomers. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- Open Access
- 1 September 2010
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Pharmaceutical Sciences
- Vol. 46 (3) , 491-497
Mechanical properties and total hydroxycinnamic derivative release of starch/glycerol/Melissa officinalis extract films
The aim of this study was to investigate the mechanical properties of starch/glycerol/Melissa officinalis, a topical drug delivery system for labial herpes treatment. Four films were prepared with different concentrations of starch, glycerol, and Melissa officinalis extract. The results revealed that increasing the glycerol concentration in the film reduced elasticity modulus and tensile strength, exhibiting a plasticizing effect. The increase in free volume resulted in increased release of hydroxycinnamic derivatives expressed as rosmarinic acid.
- 1 September 2010
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Pharmaceutical Sciences
- Vol. 46 (3) , 491-497
Open AccessMechanical properties and total hydroxycinnamic derivative release of starch/glycerol/Melissa officinalis extract films
The aim of this study was to investigate the mechanical properties of starch/glycerol/Melissa officinalis, a topical drug delivery system for labial herpes treatment. Four films were prepared with different concentrations of starch, glycerol, and Melissa officinalis extract. The results revealed that increasing the glycerol concentration in the film reduced elasticity modulus and tensile strength, exhibiting a plasticizing effect. The increase in free volume resulted in increased release of hydroxycinnamic derivatives expressed as rosmarinic acid.