Joselle M. McCracken
Joselle M. McCracken has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Timothy J. White
Department of Chemical and Biological Engineering University of Colorado Boulder Boulder CO 80303 USA
6 shared publications - Ralph G. Nuzzo
Department of Chemistry University of Illinois at Urbana Champaign 600 South Mathews Avenue Urbana IL 61801 USA
4 shared publications Lou Ann Miller
Frederick Seitz Materials Research Laboratory University of Illinois at Urbana‐Champaign Urbana IL 61801 USA
2 shared publicationsAdina Badea
School of Chemical Sciences University of Illinois‐Urbana Champaign Urbana IL 61801 USA
1 shared publication- Adina Badea
Department of Pathology and Laboratory Medicine, Brown University, Providence, Rhode Island, 02912, United States
1 shared publication Alexis T. Phillips
Department of Chemical and Biological Engineering
1 shared publication
Latest Publications
- 10 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (12) , 2559-2567
Dynamic Infrared Reflective Filters Prepared from Cholesteric Liquid Crystalline Elastomers
- 10 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (12) , 2559-2567
Dynamic Infrared Reflective Filters Prepared from Cholesteric Liquid Crystalline Elastomers
- 4 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (50) , 69851-69857
Cuboidal Deformation of Multimaterial Composites Prepared by 3-D Printing of Liquid Crystalline Elastomers
Multimaterial 3-D printing (3DP) of isotropic (IsoE) and liquid crystalline elastomers (LCE) yields spatially programmed elements that undergo a cuboidal shape transformation upon heating. The thermomechanical deformation of 3DP elements is determined by the geometry and extent of the isotropic and anisotropic regions. The synthesis and experimental characterization of the 3DP elements are complemented by finite element analysis (FEA). Calculations emphasize that the cuboidal deformation of the myriad 3DP elements is a manifestation of local stress gradients imparted by local control of the material composition and anisotropy. Varying the rectilinear spatial distribution of the multimaterial elastomer composites produces complex, multistable states that provide insights into how stress gradients drive multimaterial elastomer actuation. The thermomechanical stimuli response of the multimaterial elements is explored as a tactile element.
- 4 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (50) , 69851-69857
Cuboidal Deformation of Multimaterial Composites Prepared by 3-D Printing of Liquid Crystalline Elastomers
Multimaterial 3-D printing (3DP) of isotropic (IsoE) and liquid crystalline elastomers (LCE) yields spatially programmed elements that undergo a cuboidal shape transformation upon heating. The thermomechanical deformation of 3DP elements is determined by the geometry and extent of the isotropic and anisotropic regions. The synthesis and experimental characterization of the 3DP elements are complemented by finite element analysis (FEA). Calculations emphasize that the cuboidal deformation of the myriad 3DP elements is a manifestation of local stress gradients imparted by local control of the material composition and anisotropy. Varying the rectilinear spatial distribution of the multimaterial elastomer composites produces complex, multistable states that provide insights into how stress gradients drive multimaterial elastomer actuation. The thermomechanical stimuli response of the multimaterial elements is explored as a tactile element.
- 9 January 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (2) , 664-671
Compositional and Temperature Dependence of Amorphous Polymer Networks Undergoing Mechanotropic Phase Transitions
- 9 January 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (2) , 664-671
Compositional and Temperature Dependence of Amorphous Polymer Networks Undergoing Mechanotropic Phase Transitions
- Open Access
- 3 October 2023
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 131 (14) , 148202
Lifting, Loading, and Buckling in Conical Shells
Liquid crystal elastomer films that morph into cones are strikingly capable lifters. Thus motivated, we combine theory, numerics, and experiments to reexamine the load-bearing capacity of conical shells. We show that a cone squashed between frictionless surfaces buckles at a smaller load, even in scaling, than the classical Seide-Koiter result. Such buckling begins in a region of greatly amplified azimuthal compression generated in an outer boundary layer with oscillatory bend. Experimentally and numerically, buckling then grows subcritically over the full cone. We derive a new thin-limit formula for the critical load, , and validate it numerically. We also investigate deep postbuckling, finding further instabilities producing intricate states with multiple Pogorelov-type curved ridges arranged in concentric circles or Archimedean spirals. Finally, we investigate the forces exerted by such states, which limit lifting performance in active cones.- 3 October 2023
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 131 (14) , 148202
Open AccessLifting, Loading, and Buckling in Conical Shells
Liquid crystal elastomer films that morph into cones are strikingly capable lifters. Thus motivated, we combine theory, numerics, and experiments to reexamine the load-bearing capacity of conical shells. We show that a cone squashed between frictionless surfaces buckles at a smaller load, even in scaling, than the classical Seide-Koiter result. Such buckling begins in a region of greatly amplified azimuthal compression generated in an outer boundary layer with oscillatory bend. Experimentally and numerically, buckling then grows subcritically over the full cone. We derive a new thin-limit formula for the critical load, , and validate it numerically. We also investigate deep postbuckling, finding further instabilities producing intricate states with multiple Pogorelov-type curved ridges arranged in concentric circles or Archimedean spirals. Finally, we investigate the forces exerted by such states, which limit lifting performance in active cones. - 3 May 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (13)
Millimeter‐Thick Liquid Crystalline Elastomer Actuators Prepared by‐Surface‐Enforced Alignment
Liquid crystalline elastomers (LCE) are thermally cyclable, compliant actuators with compelling mechanical properties. The large and programmable deformation of LCE has led to numerous functional examinations spanning optics, medical devices, and robotics. A well‐established method to prepare complex LCE actuators is to utilize surface‐enforced photoalignment. Herein, a facile and scalable approach is reported to circumvent the physical limits of surface‐enforced alignment (e.g., samples that are 50 µm or less) to amplify the achievable force output in LCE. Applying an approach termed direct layering, the thermomechanical response of LCE elements prepared with +1 disclination patterns in a range of compositions and thicknesses is contrasted. The design and preparation of +1 disclination patterns and arrays is explored to assess the contribution of sample geometry and overlap to deformation and force output. The methodology detailed in this contribution allows for the preparation of elements ≈1 mm in thickness that are capable of actuating large objects. Furthermore, the fabrication of these elements uniquely enables the realization of mechanical instabilities to hasten the actuation rate in response to thermal change and to enable leaping.
- 3 May 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (13)
Millimeter‐Thick Liquid Crystalline Elastomer Actuators Prepared by‐Surface‐Enforced Alignment
Liquid crystalline elastomers (LCE) are thermally cyclable, compliant actuators with compelling mechanical properties. The large and programmable deformation of LCE has led to numerous functional examinations spanning optics, medical devices, and robotics. A well‐established method to prepare complex LCE actuators is to utilize surface‐enforced photoalignment. Herein, a facile and scalable approach is reported to circumvent the physical limits of surface‐enforced alignment (e.g., samples that are 50 µm or less) to amplify the achievable force output in LCE. Applying an approach termed direct layering, the thermomechanical response of LCE elements prepared with +1 disclination patterns in a range of compositions and thicknesses is contrasted. The design and preparation of +1 disclination patterns and arrays is explored to assess the contribution of sample geometry and overlap to deformation and force output. The methodology detailed in this contribution allows for the preparation of elements ≈1 mm in thickness that are capable of actuating large objects. Furthermore, the fabrication of these elements uniquely enables the realization of mechanical instabilities to hasten the actuation rate in response to thermal change and to enable leaping.
- Top Cited Papers
- 9 September 2021
- Published by Springer Nature in Nature Reviews Materials
- Vol. 7 (1) , 23-38
Synthesis and alignment of liquid crystalline elastomers
- 9 September 2021
- Published by Springer Nature in Nature Reviews Materials
- Vol. 7 (1) , 23-38
Top Cited PapersSynthesis and alignment of liquid crystalline elastomers
- 9 September 2020
- Published by Wiley in Advanced Healthcare Materials
- Vol. 10 (4) , e2001040
Biocompliant Composite Au/pHEMA Plasmonic Scaffolds for 3D Cell Culture and Noninvasive Sensing of Cellular Metabolites
The field of 3D printing is an area of active research, with a substantial focus given to the design and construction of customized tools for applications in technology. There exists a particular need in these developing areas of opportunity for new multi‐functional soft materials that are biologically compatible for the growth and directed culturing of cells. Herein, a composite material consisting of gold nanoparticles with useful plasmonic properties embedded within a highly hydrophilic poly‐2‐hydroxyethylmethacrylate matrix is described and characterized. This composite material serves dual functions as both host framework scaffold for cell lines such as pre‐osteoblasts as well as a plasmonic biosensor for in situ measurements of living cells. The plasmonic properties of this system are characterized as a function of the material properties and related to compositional features of the material through a proposed light‐directed mechanism. This chemistry provides a tunable, 3D printable plasmonic composite material of encapsulated gold nanoparticles in a biologically‐compliant, acrylate‐based hydrogel matrix. Surface‐enhanced Raman scattering studies of 3D‐microcultures supported by the scaffolds are carried out and the strong influence of perm‐selective molecular diffusion in its analytical responses is established. Most notably, specific, largely hydrophilic, cellular metabolites are detected within the supported live cultures.
- 9 September 2020
- Published by Wiley in Advanced Healthcare Materials
- Vol. 10 (4) , e2001040
Biocompliant Composite Au/pHEMA Plasmonic Scaffolds for 3D Cell Culture and Noninvasive Sensing of Cellular Metabolites
The field of 3D printing is an area of active research, with a substantial focus given to the design and construction of customized tools for applications in technology. There exists a particular need in these developing areas of opportunity for new multi‐functional soft materials that are biologically compatible for the growth and directed culturing of cells. Herein, a composite material consisting of gold nanoparticles with useful plasmonic properties embedded within a highly hydrophilic poly‐2‐hydroxyethylmethacrylate matrix is described and characterized. This composite material serves dual functions as both host framework scaffold for cell lines such as pre‐osteoblasts as well as a plasmonic biosensor for in situ measurements of living cells. The plasmonic properties of this system are characterized as a function of the material properties and related to compositional features of the material through a proposed light‐directed mechanism. This chemistry provides a tunable, 3D printable plasmonic composite material of encapsulated gold nanoparticles in a biologically‐compliant, acrylate‐based hydrogel matrix. Surface‐enhanced Raman scattering studies of 3D‐microcultures supported by the scaffolds are carried out and the strong influence of perm‐selective molecular diffusion in its analytical responses is established. Most notably, specific, largely hydrophilic, cellular metabolites are detected within the supported live cultures.
- 22 November 2018
- Published by Wiley in Advanced Healthcare Materials
- Vol. 8 (1) , e1800788
3D‐Printed Hydrogel Composites for Predictive Temporal (4D) Cellular Organizations and Patterned Biogenic Mineralization
Materials chemistries for hydrogel scaffolds that are capable of programming temporal (4D) attributes of cellular decision‐making in supported 3D microcultures are described. The scaffolds are fabricated using direct‐ink writing (DIW)—a 3D‐printing technique using extrusion to pattern scaffolds at biologically relevant diameters (≤ 100 µm). Herein, DIW is exploited to variously incorporate a rheological nanoclay, Laponite XLG (LAP), into 2‐hydroxyethyl methacrylate (HEMA)‐based hydrogels—printing the LAP–HEMA (LH) composites as functional modifiers within otherwise unmodified 2D and 3D HEMA microstructures. The nanoclay‐modified domains, when tested as thin films, require no activating (e.g., protein) treatments to promote robust growth compliances that direct the spatial attachment of fibroblast (3T3) and preosteoblast (E1) cells, fostering for the latter a capacity to direct long‐term osteodifferentiation. Cell‐to‐gel interfacial morphologies and cellular motility are analyzed with spatial light interference microscopy (SLIM). Through combination of HEMA and LH gels, high‐resolution DIW of a nanocomposite ink (UniH) that translates organizationally dynamic attributes seen with 2D gels into dentition‐mimetic 3D scaffolds is demonstrated. These analyses confirm that the underlying materials chemistry and geometry of hydrogel nanocomposites are capable of directing cellular attachment and temporal development within 3D microcultures—a useful material system for the 4D patterning of hydrogel scaffolds.
- 22 November 2018
- Published by Wiley in Advanced Healthcare Materials
- Vol. 8 (1) , e1800788
3D‐Printed Hydrogel Composites for Predictive Temporal (4D) Cellular Organizations and Patterned Biogenic Mineralization
Materials chemistries for hydrogel scaffolds that are capable of programming temporal (4D) attributes of cellular decision‐making in supported 3D microcultures are described. The scaffolds are fabricated using direct‐ink writing (DIW)—a 3D‐printing technique using extrusion to pattern scaffolds at biologically relevant diameters (≤ 100 µm). Herein, DIW is exploited to variously incorporate a rheological nanoclay, Laponite XLG (LAP), into 2‐hydroxyethyl methacrylate (HEMA)‐based hydrogels—printing the LAP–HEMA (LH) composites as functional modifiers within otherwise unmodified 2D and 3D HEMA microstructures. The nanoclay‐modified domains, when tested as thin films, require no activating (e.g., protein) treatments to promote robust growth compliances that direct the spatial attachment of fibroblast (3T3) and preosteoblast (E1) cells, fostering for the latter a capacity to direct long‐term osteodifferentiation. Cell‐to‐gel interfacial morphologies and cellular motility are analyzed with spatial light interference microscopy (SLIM). Through combination of HEMA and LH gels, high‐resolution DIW of a nanocomposite ink (UniH) that translates organizationally dynamic attributes seen with 2D gels into dentition‐mimetic 3D scaffolds is demonstrated. These analyses confirm that the underlying materials chemistry and geometry of hydrogel nanocomposites are capable of directing cellular attachment and temporal development within 3D microcultures—a useful material system for the 4D patterning of hydrogel scaffolds.
- 4 October 2017
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 13 (40) , 7312-7317
A programmable soft chemo-mechanical actuator exploiting a catalyzed photochemical water-oxidation reaction
A mechanistic investigation is described for an actuatable bilayer polymeric device in which a covalently-linked photo-active catalyst drives systemic pH gradients, effecting reversible and cyclic mechanical transformation across the interfacial boundary.
- 4 October 2017
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 13 (40) , 7312-7317
A programmable soft chemo-mechanical actuator exploiting a catalyzed photochemical water-oxidation reaction
A mechanistic investigation is described for an actuatable bilayer polymeric device in which a covalently-linked photo-active catalyst drives systemic pH gradients, effecting reversible and cyclic mechanical transformation across the interfacial boundary.
- 31 July 2017
- Published by Wiley in Advanced Biosystems
- Vol. 1 (9)
Deterministic Integration of Biological and Soft Materials onto 3D Microscale Cellular Frameworks
Complex 3D organizations of materials represent ubiquitous structural motifs found in the most sophisticated forms of matter, the most notable of which are in life‐sustaining hierarchical structures found in biology, but where simpler examples also exist as dense multilayered constructs in high‐performance electronics. Each class of system evinces specific enabling forms of assembly to establish their functional organization at length scales not dissimilar to tissue‐level constructs. This study describes materials and means of assembly that extend and join these disparate systems—schemes for the functional integration of soft and biological materials with synthetic 3D microscale, open frameworks that can leverage the most advanced forms of multilayer electronic technologies, including device‐grade semiconductors such as monocrystalline silicon. Cellular migration behaviors, temporal dependencies of their growth, and contact guidance cues provided by the nonplanarity of these frameworks illustrate design criteria useful for their functional integration with living matter (e.g., NIH 3T3 fibroblast and primary rat dorsal root ganglion cell cultures).
- 31 July 2017
- Published by Wiley in Advanced Biosystems
- Vol. 1 (9)
Deterministic Integration of Biological and Soft Materials onto 3D Microscale Cellular Frameworks
Complex 3D organizations of materials represent ubiquitous structural motifs found in the most sophisticated forms of matter, the most notable of which are in life‐sustaining hierarchical structures found in biology, but where simpler examples also exist as dense multilayered constructs in high‐performance electronics. Each class of system evinces specific enabling forms of assembly to establish their functional organization at length scales not dissimilar to tissue‐level constructs. This study describes materials and means of assembly that extend and join these disparate systems—schemes for the functional integration of soft and biological materials with synthetic 3D microscale, open frameworks that can leverage the most advanced forms of multilayer electronic technologies, including device‐grade semiconductors such as monocrystalline silicon. Cellular migration behaviors, temporal dependencies of their growth, and contact guidance cues provided by the nonplanarity of these frameworks illustrate design criteria useful for their functional integration with living matter (e.g., NIH 3T3 fibroblast and primary rat dorsal root ganglion cell cultures).