Fangfei Li

Fangfei Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fangfei Li has a total of 271 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dehydration of FeOOH in Subducted Slabs at the Mantle Transition Zone and Uppermost Lower Mantle

    by Mengqi Guo, Xinyang Li, Wenliang Xu, Sergio Speziale, Zhaodong Liu, Zihan Zhang, Hongyu Yu, Liang Li, Fangfei Li, Qiang Zhou

    The mechanisms responsible for deep‐focus earthquakes remain under debate. In this study, we propose that the dehydration of hydrous minerals may play a role in the occurrence of deep‐focus earthquakes. FeOOH is abundant on the Earth's surface in the form of rust and deposits. We investigate the high‐pressure and high‐temperature behavior of FeOOH under extreme conditions up to 59 GPa and 2000 K using laser‐heated diamond anvil cells and X‐ray diffraction. Our results indicate that hydrous mineral ε‐FeOOH undergoes dehydration and forms a newly observed, unidentified hexagonal‐related phase at pressures of 19.0–25.6 GPa and temperatures of 1300–2000 K, corresponding to mantle depths of 550–700 km. At higher pressures, HP‐Fe 3 O 4 occurs among the reaction products. At 26 GPa, HP‐Fe 3 O 4 is approximately 20% denser than ε‐FeOOH, potentially affecting the gravitational stability of Fe‐rich domains. Our results further show that the estimated temperature range for the onset of FeOOH dehydration partially overlaps with the temperature range associated with enhanced deep‐focus earthquakes at depths of 450–680 km. This correspondence suggests that FeOOH dehydration may supply fluids within subducted slabs and thereby contribute to processes associated with deep‐focus earthquakes.

  • Carrier dynamics under synergistic interfacial charge and energy transfer in Au–CsPbBr3 nanocrystal heterostructures formed by chemical deposition

    by Xinyu Liu, Junyi Tao, Yifan Li, Shuhao Zhang, Guangjing Hou, Xu Wang, Fangfei Li, Hailong Chen, Yuxiang Weng, Zhuan Wang, et al.

    Metal–perovskite nanocrystal heterostructures (NHs) offer a useful platform for regulating excited-state dynamics, but the interplay among carrier relaxation, interfacial transfer, and competing recombination pathways remains unclear. Here, Au–CsPbBr3 NHs were constructed by depositing Au nanoparticles (NPs) onto CsPbBr3 nanocrystals, and their carrier dynamics were investigated by transient absorption and time-resolved photoluminescence spectroscopy combined with global analysis. The deposition of Au NPs introduces an additional interfacial relaxation channel and facilitates both charge and energy transfer, leading to ∼50% photoluminescence quenching. Global analysis further shows that the band-edge state population time decreases from 0.84 to 0.60 ps, the band-edge radiative recombination lifetime increases from 218 to 488 ps, and the defect-state radiative decay lifetime decreases from 325 to 246 ps. These results reveal that Au NPs do not merely quench photoluminescence but reconstruct interfacial relaxation and recombination pathways, thereby accelerating carrier cooling, promoting interfacial charge separation, and modulating defect-state emission. Consequently, photogenerated carriers can be transferred to the interface before band-edge recombination and defect-mediated dissipation, increasing the fraction of carriers available for extraction or surface reactions. Photoresponse and electrochemical impedance spectroscopy measurements further support enhanced charge separation and lower interfacial charge-transfer resistance in Au–CsPbBr3 NHs. This work establishes a carrier-dynamics framework for relaxation, transfer, and recombination in Au–CsPbBr3 NHs and provides a mechanistic basis for the rational design of perovskite/metal NHs.

  • Open Access

    Single‐Crystal Elasticity of Lawsonite at High Pressure: Implications for High Poisson's Ratio and V P / V S Zones in Subduction Zones

    by Shuo Gao, Xinyang Li, Jiacheng Zhang, Sergio Speziale, Haotian Zhang, Zihan Zhang, You Tian, Xiaohui Yu, Youyue Zhang, Liang Li, et al.

    Conventional models attribute anomalously high Poisson's ratios in Earth's interior to the presence of fluids or melts. Here, we propose a fundamentally different mechanism, which is rooted in the unique crystal chemistry of lawsonite (CaAl 2 Si 2 O 7 (OH) 2 ·H 2 O). Our high‐pressure and room temperature experiments reveal anomalous changes in the elastic tensor of lawsonite at ∼4.5 and ∼9 GPa, which are linked to phase transitions involving hydrogen‐bond reorganization. Compared to typical mantle minerals, lawsonite exhibits moderately low P‐wave velocity ( V P ) and very low S‐wave velocity ( V S ). More notably, it is characterized by exceptionally high isotropic aggregate Poisson's ratio (0.32–0.38) and V P / V S ratio (1.92–2.27), which serve as diagnostic identifiers in the interpretation of seismic models. In hot subduction zones, such as Cascadia and Southwest Japan, lawsonite provides a key mineralogical mechanism for the high‐Poisson's‐ratio anomalies observed at 20–50 km depth, presenting a viable explanation distinct from conventional models that invoke overpressurized, fluid‐saturated oceanic crust. In colder subduction systems such as NE Japan, the presence of 20–40 vol.% lawsonite can account for the seismic anomalies observed at 50–90 km depth. Furthermore, lawsonite exhibits strong velocity anisotropy, which may help interpret the observed seismic anisotropy. The seismologically unique signature of lawsonite and its compatibility with seismic models underscore how this mineral could have a critical role in facilitating water transport into the deep mantle.

  • Transformation pathways of CO 2 − IV : Deviatoric stress and thermal activation

    by Yingzhan Wei, Guanlin Li, Yanlei Geng, Mengqiong Pu, Nico Giordano, Jiacheng Zhang, Xiaomei Yuan, Shuo Gao, Qiang Zhou, Liang Li, et al.

    The structural evolution and transformation pathways of carbon dioxide phase IV (${\mathrm{CO}}_{2}$-IV) are investigated over 13.0--76.7 GPa and 296--700 K using synchrotron x-ray diffraction, Raman spectroscopy, and first-principles calculations. ${\mathrm{CO}}_{2}$-IV was obtained from ${\mathrm{CO}}_{2}$-I by isothermal compression to 13.0 GPa at 600 K. Subsequent single-crystal diffraction performed at 14.5 GPa and 296 K confirms that ${\mathrm{CO}}_{2}$-IV adopts a rhombohedral $\text{R}\overline{3}\text{c}$ structure, consistent with Datchi et al. [Phys. Rev. Lett. 103, 185701 (2009)], establishing its purely molecular character without evidence for an ``intermediate bonding state''. At room temperature, deviatoric stress promotes a symmetry-lowering distortion of $R\overline{3}c$ ${\mathrm{CO}}_{2}$-IV at 14.6 GPa, yielding a distorted molecular configuration described by a triclinic $P1$ model, denoted here as an ${\mathrm{IV}}^{\ensuremath{'}}$-type distortion. From 296 to 600 K, the onset pressure of this distortion increases modestly, giving rise to a positively sloped kinetic onset line in the $P$--$T$ diagram. At 650 and 700 K, enhanced thermal relaxation substantially reduces the influence of deviatoric stress, and no symmetry breaking is detected before the molecular-to-nonmolecular transformation, stabilizing the $R\overline{3}c$ structure in the molecular regime. Upon further compression, the molecular solid transforms into metastable nonmolecular states containing mixed three- and fourfold-coordinated carbon atoms. The transformation pathway is temperature dependent: at 296--600 K, amorphization proceeds from the $P1$-distorted form of ${\mathrm{CO}}_{2}$-IV to a-${\mathrm{CO}}_{2}$, whereas at 650--700 K the transformation proceeds directly from $R\overline{3}c {\mathrm{CO}}_{2}$-IV to the more ordered metastable covalent phase VI. The onset pressure of the molecular-to-nonmolecular transformation decreases with increasing temperature. These results reveal that the high-pressure behavior of ${\mathrm{CO}}_{2}$ is governed by the interplay between deviatoric stress and thermal activation, which controls symmetry lowering within the molecular regime and the subsequent pathways toward amorphous and metastable covalent structures.

  • Pressure-Induced Phase Transition and Structural Evolution of Single-Crystal CaSnO3 Perovskite

    by Xue Zhang, Xinyang Li, Ling Chen, Mengqiong Pu, Jinxiao Li, Xiaohan Wang, Liang Li, Fangfei Li, Qiang Zhou

    Calcium stannate (CaSnO3) is a widely used analogue of bridgmanite (MgSiO3), capable of undergoing a pressure-induced perovskite-to-postperovskite phase transition under accessible experimental conditions. In this study, high-quality single-crystal CaSnO3 perovskite was synthesized by solid-state reaction. Its structural behavior at pressures up to 50.0 GPa was investigated using diamond-anvil cells combined with in situ synchrotron X-ray diffraction, Raman spectroscopy, and first-principles calculations. X-ray diffraction analysis identifies the onset of the phase transition at 17.1 GPa, while Raman spectroscopy provides complementary evidence through the emergence of a new vibrational mode at 18.3 GPa. Furthermore, theoretical calculations confirmed the thermodynamic stability of the postperovskite phase above 17.0 GPa, corroborating the experimental findings. Due to its comparable axial ratio and more readily achievable pressure–temperature conditions relative to MgSiO3, CaSnO3 serves as an excellent low-pressure analogue for elucidating the properties and dynamics of the deep Earth’s interior.

  • Open Access

    Anion–cation synergy enables the formation of ionic liquid-derived adaptive interphases for ultra-stable zinc–metal batteries

    by Kaisheng Sun, Yanlei Geng, Runan Li, Gaorui Gu, Ningzhi Cao, Chaopeng Zhang, Fangfei Li, Liang Li, Xiaoteng Jia, Danming Chao, et al.

    Using 1-ethyl-3-methylimidazolium methanesulfonate as an electrolyte additive regulates the solvation structure and constructs an SEI composed of a sacrificial layer and a dynamic adsorption layer, greatly improving zinc battery stability.

  • Measurements of elastic constants of wide Al-composition range AlGaN epi-materials from metalorganic chemical vapor deposition

    by Guang Chen, Manika Tun Nafisa, Zhe Chuan Feng, Hao-Hsiung Lin, Fangfei Li, Gu Xu, Jeffrey Yiin, Lingyu Wan, Weijie Lu, Benjamin Klein, et al.

    Brillouin scattering measurements and investigation on AlGaN alloy films with Al compositions of 00.62 from metalorganic chemical vapor deposition are performed. Six elastic constants and bulk modulus of a wide Al-composition range of AlGaN epi-materials are deduced. It is revealed that the elastic constant values of ternary AlGaN with Al compositions of 0.20–0.62 are much greater than those of binary GaN and AlN. It is indicated that the addition of Al in GaN or Ga in AlN has caused a rise in the bulk modulus. The graphical variations and formalized polynomial descriptions of elastic constants and bulk modulus vs Al composition in the full Al range are presented. Brillouin scattering studies on AlGaN alloys address a previously unexplored research gap in wide-bandgap AlGaN semiconductors, as no such studies have been reported so far to the best of our available knowledge. This research and the detailed experimental and calculated data may provide a foundation for more in-depth scientific analyses and future investigations.

  • Dimensional crossover-induced polarization boost in layered perovskite Ca2Nb2O7 under high pressure

    by Yunqi Ji, Xiaohan Wang, Xiaohe Li, Wenting Tang, Xinyang Li, Xin Wang, Fangfei Li, Liang Li, Qiang Zhou

    In recent years, dimensional engineering in perovskites has attracted considerable interest as an effective strategy to tailor their optical and electrical properties. However, conventional chemical doping inherently modifies the material composition, complicating the fundamental understanding of intrinsic dimensional effects on perovskite properties. Here, taking the layered perovskite Ca2Nb2O7 as a model, we showcase the observation of a mechanical pressure-induced dimensional transition from a two-dimensional layered perovskite to a denser three-dimensional defective perovskite structure across a distinct two-phase coexistence region ranging from 12 to 18 GPa, employing in situ high-pressure x-ray diffraction experiments in conjunction with first-principles calculations. Notably, our comprehensive high-pressure single-crystal property measurements reveal that the structural densification results in approximately a 20% bandgap reduction, over two orders of magnitude decrease in the electrical transport anisotropy factor, and a threefold enhancement of ferroelectric remanent polarization. Our results establish a viable approach for achieving composition-preserving dimensional transitions in perovskites and provide key insights into the structure–property evolution of layered perovskites under extreme pressure.


  • Pressure-Induced Evolution of Structure and Conduction Mechanism Transition in Ba 0.5 Sr 0.5 TiO 3

    by Zifan Yu, Zhenfang Xing, Yue Lin, Min Cao, Wenhui Liu, Lin Zhao, Fangfei Li, Yonghao Han

    Barium strontium titanate (BST) is a prototypical perovskite ferroelectric with promising applications in high-performance electronic devices. In this work, the evolution of structural, ferroelectric, and dielectric properties of Ba0.5Sr0.5TiO3 under pressure was systematically investigated using multiple in situ characterization techniques at high pressures, including synchrotron X-ray diffraction, Raman spectroscopy, alternating current (AC) impedance spectroscopy, and ferroelectric hysteresis loop measurements. Meanwhile, the underlying physical mechanism was elucidated via first-principles density functional theory (DFT) calculations. The results demonstrate that Ba0.5Sr0.5TiO3 undergoes a continuous structural phase transition from the tetragonal phase (P4mm) to the cubic phase (Pm3-m) in the pressure range of 10-18 GPa, which is concurrent with its ferroelectric-to-paraelectric phase transition. High pressure suppresses the off-center displacement of Ti4+ cations within the TiO6 octahedra, resulting in the vanishing of spontaneous polarization and a significant reduction in relative permittivity. Concomitantly, the dielectric loss increases due to the emergence of electronic conduction in the paraelectric phase of Ba0.5Sr0.5TiO3. DFT calculations confirm that the band gap narrowing accounts for the enhanced electronic conductivity. This work establishes a clear pressure-driven structure-property correlation for BST, deepens the understanding of the high-pressure response mechanism of perovskite ferroelectrics, and provides experimental and theoretical insights for designing high-pressure-tolerant ferroelectric devices.


  • Interface passivated quasi-2D perovskite-based highly stable photodetectors for weak-light detection

    by Xiaoting Wang, Long Yuan, Ning Sui, Ling Zuo, Xiujun Gao, Jiajia Ning, Fangfei Li, Qiang Zhou, Xiaochun Chi, Hanzhuang Zhang, et al.

    Weak-light detectors exhibiting long-term stability are of significant importance for both national defense and civilian applications. To address this, we fabricated a lateral high-performance photodetector (PD) based on a poly(N-vinylcarbazole) (PVK)-passivated 2D (PMA)2MAPb2I7 perovskite. The PVK passivation significantly improved both device performance and stability by suppressing vacancy formation and restricting grain boundary migration. The passivated PD achieved a nearly eightfold improvement in self-powered responsivity (R = 0.25 A·W−1, D* = 2.5 × 1011 Jones) and a sixfold enhancement under 5.0 V bias (R = 10.28 A·W−1, D* = 2.6 × 1012 Jones) in comparison with those of the pristine counterpart, showing a high performance compared to the other PDs based on perovskite materials. The passivated PD in self-powered mode demonstrated exceptional operational stability by maintaining 80.7% of its initial photocurrent over 1000 h in ambient air. Integrated into a custom optical communication system, this PD enabled reliable data transmission, while also delivering high-quality imaging under weak illumination (0.1 μW cm−2). This work provided a valuable design strategy for high-performance PDs, translating device innovations into practical solutions for self-powered, weak-light applications critical to emergency scenarios.