ÁSÁlvaro Miguel Sampaio

Álvaro Miguel Sampaio

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Álvaro Miguel Sampaio has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design and Production of Large-Scale Products by Robotic Extrusion-Based Additive Manufacturing

    by Artur Costa, Afonso Santos, Álvaro M. Sampaio, António J. Pontes

    The use of additive manufacturing (AM) systems, particularly through robotic arm extrusion, introduces the need for new approaches in areas such as product design, material selection, processability, system communication, and production control. These advanced manufacturing techniques enable the creation of large-scale, innovative solutions. One key area of application is outdoor environments, where the scalability offered by robotic arm production proves particularly useful. Urban green spaces, which serve as areas for leisure and community gathering, are a prime focus due to their social benefits. This chapter discusses the research aimed at developing products that enhance social interaction in these green areas. By leveraging large-scale robotic extrusion and the design flexibility of AM, this work helped create sustainable products made from recycled plastic and with minimal generated waste, promoting both innovation and environmental responsibility. This chapter also showcases the development and production of such products through programming carried out using a parametric software, which allows for greater process freedom through dynamic layer generation, combined with the six axes degrees of freedom robotic arm. This, combined with a polymer pellet extruder, provides flexibility and precision in process control and, subsequently, in large-scale part production.

  • Open Access

    Evaluating the Electromagnetic Shielding of Continuous Carbon Fiber Parts Produced by Additive Manufacturing

    by Luís C. Martins, Cátia S. Silva, Leandro C. Fernandes, Álvaro M. Sampaio, António J. Pontes

    Electronic devices are sensitive to electromagnetic (EM) emissions requiring electromagnetic shielding protection to assure good operation, preventing noise, malfunctioning, or even burning. To assure protection, it is important to develop suitable material and design solutions for electronic enclosures. Most common enclosures are made with metal alloys by traditional manufacturing methods. However, resourcing to thermoplastic composites combined with additive manufac-turing (AM) technologies emerges as an alternative that enables to fabricate complex parts that are lightweight, consolidated and oxidation and corrosion resistant. In this research, an AM technique based in material extrusion was used to print 2 mm thick specimens with a multi-material made of micro-carbon fiber (CF) filled polyamide, reinforced, at specific layers, by continuous carbon fibers stacked with a 90° rotation to each other. Specimens electromagnetic shielding effectiveness (EMSE) was evaluated in the frequency band of 0.03 – 3 GHz by coaxial transmission line method. De-pending on the number of CF layers, the EM shielding obtained can up to 70 dB, with a specific shielding up to 60 dB.cm3/g, predominantly by absorption mechanism, being 22 times higher that without the CF layers. These findings fundament this innovative approach for lightweight cus-tomizable solutions for EM shielding applications.


  • Open Access

    Design and industrial implementation of a multi-functional part produced by powder bed fusion

    by A. C. Lopes, A. M. Sampaio, F. Fernandes, P. M. Vaz, A. J. Pontes

    The use of robot end-effectors programmed to perform handling tasks in industrial environments has expanded in several sectors as a consequence of the rapid digital transformation seen in recent years. With such growing demands, additive manufacturing is evolving in the robotics field with more efficient, innovative, and customer-specific solutions owing to its design flexibility. Thus, this work presents a robot end-effector developed and produced by powder bed fusion (PBF) to execute palletizing operations in the automotive electronics industry, where electrostatic discharge interference is a critical concern. To guarantee the functionality of the developed robot end-effector under real conditions of implementation, prototypes of polyamide 12 (PA12) and PA12 incorporating graphene nanoplatelets were fabricated and characterized. This included the assessment of the mass, electrical surface resistance, and mechanical properties under tensile and compressive loads using biaxial strain gauges coupled to the prototypes for local strain monitoring. The experimental data were then used to define multilinear isotropic hardening models needed to numerically characterize the robotic system. At last, the final product was validated in an industrial environment at Bosch Car Multimedia S.A. Through the applied methodology, valuable insights in guiding process parameters optimization and materials selection for functional PBF parts depending on the technical requirements demanded by industrials are provided.


  • Open Access

    Designing Textile Surfaces through Additive Manufacturing for Unsighted Individuals

    by Susana Marques, Liliana Pina, José Lucas, Paulo Duarte, Rui Miguel, Álvaro Sampaio

    This paper aims to discuss the use of Additive Manufacturing (AM) to produce textile samples. The goal is to explore different possibilities in the creation of different stimuli regarding textures and scents coming from the application of different types of filaments on different textile surfaces, with different weights and compositions. Considering the application of this technology in fashion products, particularly on clothing, the different textile samples developed, will be evaluated by visually impaired (VI) individuals on further empirical studies. Since unsighted individuals are regarded as more sensitive to tactile and olfactory experiences, it is important to understand their perception regarding AM acceptance. Having into account the perspective of fashion design towards inclusivity, the availability of different sensory inputs in common fashion brands could improve the relationship between visually impaired (VI) consumers and fashion brands. This paper fills the gap in the literature regarding unsighted individuals and their experiences with clothing, especially those using AM technology. Keywords: Additive Manufacturing; textile surfaces; visually impaired individuals;


  • Open Access

    Cellular Materials Optimisation Framework

    by Miguel R. Silva, António M. Pereira, Nuno M. Alves, Álvaro M. Sampaio, António J. Pontes

    The methods used to achieve optimal solutions to an engineering problem are diverse

  • Open Access

    A Novel Route to Optimize Placement Equipment Kinematics by Coupling Capacitive Accelerometers

    by João Veiga, Susana Lima, Luís Silva, Vítor Hugo Carneiro, Mário Pinhão, Arminda Manuela Gonçalves, Maria Teresa Malheiro, Álvaro Miguel Sampaio, José Meireles, António J. Pontes, et al.

    Machine end-effector kinematic analysis is critical to optimizing transporting components where inertial forces are the main loads. While displacements may be measured with relatively high accuracy in transportation equipment motors, the inertial forces in the transported components are seldom optimized. This is especially relevant in electronic component placement systems, where the components have a wide range of configurations (i.e., geometry and mass) and the deployment dimensional/geometric tolerances are remarkably good. The optimization of these systems requires the monitoring of the real position of the accelerometers relative to the measurement point of interest with sufficient accuracy that allows the assembly position to be predicted instantaneously. This study shows a novel method to calibrate this equipment using triaxial accelerometers on a surface mount machine to measure the end-effector accelerations and velocities in its planar motion. The dynamic equations of the system and the method for integration are presented to address the uncertainty on the exact position of the accelerometer sensors relative to the measuring point of interest exist and allow the position correction to optimize response and accuracy.


  • Open Access

    Understanding Dimensional and Geometrical Tolerances of Metal, Polymer and Composite Powder-Bed Fusion Additive Manufacturing Technologies

    by Ana C. Lopes, Eva C. Silva, Álvaro M. Sampaio, António J. Pontes

    Powder-bed fusion (PBF) additive manufacturing technologies have the potential to produce near-net shaped complex final parts for various industries, such as aerospace and automotive


  • Open Access

    Hybrid Manufacturing of Aluminium Parts Combining Additive and Conventional Technologies—Mechanical and Thermal Properties

    by Eva C. Silva, Josué A. Candiango, Sérgio J. Rodrigues, Álvaro M. Sampaio, António J. Pontes

    Metal additive-manufacturing technologies enable the production of complex geometries. However, high manufacturing costs hinder these technologies being employed in some industries. In this sense, a hybrid strategy is presented in this paper, to achieve the best of additive and subtractive technologies, offering economic advantages. AlSi10Mg aluminium powder was deposited on AW-6082 pre-machined substrates and mechanical and thermal properties of these specimens were evaluated considering the application of a stress relief heat treatment. The results were especially good in the compressive mechanical properties and in the thermal properties: compressive properties were improved by up to 27%, and the specific heat capacity and coefficient of thermal expansion were reduced by up to 38%, compared to additively manufactured AlSi10Mg. Therefore, hybrid manufacturing can be a profitable solution (i) in thermal management applications, (ii) when compressive loads are presented, or (iii) to repair damaged parts, providing a circular economy, as presented in a case study of this paper.