CHChristian Horstmann

Christian Horstmann

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Christian Horstmann has a total of 105 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fatigue behaviour of laser shock peened AISI D2 tool steel

    by Lucas Azevedo, Nikolai Kashaev, Christian Horstmann, Volker Ventzke, Carlos Furtado, Pedro M.G.P. Moreira, Paulo J. Tavares


  • Open Access

    Using the Emission of Muonic X-rays as a Spectroscopic Tool for the Investigation of the Local Chemistry of Elements

    by Matteo Aramini, Chiara Milanese, Adrian D. Hillier, Alessandro Girella, Christian Horstmann, Thomas Klassen, Katsuo Ishida, Martin Dornheim, Claudio Pistidda

    There are several techniques providing quantitative elemental analysis, but very few capable of identifying both the concentration and chemical state of elements. This study presents a systematic investigation of the properties of the X-rays emitted after the atomic capture of negatively charged muons. The probability rates of the muonic transitions possess sensitivity to the electronic structure of materials, thus making the muonic X-ray Emission Spectroscopy complementary to the X-ray Absorption and Emission techniques for the study of the chemistry of elements, and able of unparalleled analysis in case of elements bearing low atomic numbers. This qualitative method is applied to the characterization of light elements-based, energy-relevant materials involved in the reaction of hydrogen desorption from the reactive hydride composite Ca(BH4)2-Mg2NiH4. The origin of the influence of the band-structure on the muonic atom is discussed and the observed effects are attributed to the contribution of the electronic structure to the screening and to the momentum distribution in the muon cascade.


  • Open Access

    High-pressure cell for in situ neutron studies of hydrogen storage materials

    by Neslihan Aslan, C. Horstmann, Oliver Metz, Оleg Kotlyar, Martin Dornheim, Claudio Pistidda, Sebastian Büsch, Wiebke Lohstroh, Martin Müller, P. Klaus Pranzas

    A high-pressure cell for neutron experiments was developed at Helmholtz-Zentrum Geesthacht (HZG). This cell is designed for the investigation of hydrogen storage materials at pressures up to 700 bar and temperatures up to 500°C. The idea is to have a


  • Tracking the Active Catalyst for Iron‐Based Ammonia Decomposition by In Situ Synchrotron Diffraction Studies

    by Jo‐Chi Tseng, Dong Gu, Claudio Pistidda, Christian Horstmann, Martin Dornheim, Jan Ternieden, Claudia Weidenthaler

    Iron‐based catalysts for NH3 decomposition have been studied by a combination of catalytic tests and in situ synchrotron diffraction experiments performed in an inert sapphire plug‐flow cell. In contrast to steel‐based reaction cells, sapphire or quartz glass cells show no blind activity. Starting from iron oxide precursors, iron nitrides form during the activation cycle. Nitrides remain as main crystalline phases and govern the conversion of NH3 decomposition in the subsequent cycles. In this work structural and compositional changes of the nitrides were monitored in situ during heating and cooling cycles. The state of the catalyst under reaction conditions was analyzed by high resolution in situ synchrotron diffraction experiments. The analyses enable establishing reaction pathways and correlation of structural features with catalytic conversions. The most active phases are iron nitrides with high mobility and solubility for nitrogen atoms, such as Fe3Nx. Phase changes from Fe3Nx to γ‐FeNx were observed above 700 °C. The formation of γ‐FeNx seems to suppress the catalytic conversion. Moreover, the positive influence of a mesostructured support/catalyst composite on the catalytic conversion and catalyst stability were studied in detail.


  • Open Access

    Coatings for FEL optics: preparation and characterization of B4C and Pt

    by Michael Störmer, Frank Siewert, Christian Horstmann, Jana Buchheim, Grzegorz Gwalt

    Large X-ray mirrors are required for beam transport at both present-day and future free-electron lasers (FELs) and synchrotron sources worldwide. The demand for large mirrors with lengths up to 1 m single layers consisting of light or heavy elements has increased during the last few decades. Accordingly, surface finishing technology is now able to produce large substrate lengths with micro-roughness on the sub-nanometer scale. At the Helmholtz-Zentrum Geesthacht (HZG), a 4.5 m-long sputtering facility enables us to deposit a desired single-layer material some tens of nanometers thick. For the European XFEL project, the shape error should be less than 2 nm over the whole 1 m X-ray mirror length to ensure the safe and efficient delivery of X-ray beams to the scientific instruments. The challenge is to achieve thin-film deposition on silicon substrates, benders and gratings without any change in mirror shape. Thin films of boron carbide and platinum with a thickness in the range 30–100 nm were manufactured using the HZG sputtering facility. This setup is able to cover areas of up to 1500 mm × 120 mm in one step using rectangular sputtering sources. The coatings produced were characterized using various thin-film methods. It was possible to improve the coating process to achieve a very high uniformity of the layer thickness. The movement of the substrate in front of the sputtering source has been optimized. A variation in B4C layer thickness below 1 nm (peak-to-valley) was achieved at a mean thickness of 51.8 nm over a deposition length of 1.5 m. In the case of Pt, reflectometry and micro-roughness measurements were performed. The uniformity in layer thickness was about 1 nm (peak-to-valley). The micro-roughness of the Pt layers showed no significant change in the coated state for layer thicknesses of 32 nm and 102 nm compared with the uncoated substrate state. The experimental results achieved will be discussed with regard to current restrictions and future developments.


  • Open Access

    Ultra-precision fabrication of 500 mm long and laterally graded Ru/C multilayer mirrors for X-ray light sources

    by M. Störmer, H. Gabrisch, C. Horstmann, U. Heidorn, F. Hertlein, J. Wiesmann, F. Siewert, A. Rack

    X-ray mirrors are needed for beam shaping and monochromatization at advanced research light sources, for instance, free-electron lasers and synchrotron sources. Such mirrors consist of a substrate and a coating. The shape accuracy of the substrate and the layer precision of the coating are the crucial parameters that determine the beam properties required for various applications. In principal, the selection of the layer materials determines the mirror reflectivity. A single layer mirror offers high reflectivity in the range of total external reflection, whereas the reflectivity is reduced considerably above the critical angle. A periodic multilayer can enhance the reflectivity at higher angles due to Bragg reflection. Here, the selection of a suitable combination of layer materials is essential to achieve a high flux at distinct photon energies, which is often required for applications such as microtomography, diffraction, or protein crystallography. This contribution presents the current development of a Ru/C multilayer mirror prepared by magnetron sputtering with a sputtering facility that was designed in-house at the Helmholtz-Zentrum Geesthacht. The deposition conditions were optimized in order to achieve ultra-high precision and high flux in future mirrors. Input for the improved deposition parameters came from investigations by transmission electron microscopy. The X-ray optical properties were investigated by means of X-ray reflectometry using Cu- and Mo-radiation. The change of the multilayer d-spacing over the mirror dimensions and the variation of the Bragg angles were determined. The results demonstrate the ability to precisely control the variation in thickness over the whole mirror length of 500 mm thus achieving picometer-precision in the meter-range.


  • Boron carbide coatings for neutron detection probed by x-rays, ions, and neutrons to determine thin film quality

    by G. Nowak, M. Störmer, H.-W. Becker, C. Horstmann, R. Kampmann, D. Höche, M. Haese-Seiller, J.-F. Moulin, M. Pomm, C. Randau, et al.

    Due to the present shortage of 3He and the associated tremendous increase of its price, the supply of large neutron detection systems with 3He becomes unaffordable. Alternative neutron detection concepts, therefore, have been invented based on solid 10B converters. These concepts require development in thin film deposition technique regarding high adhesion, thickness uniformity and chemical purity of the converter coating on large area substrates. We report on the sputter deposition of highly uniform large-area 10B4C coatings of up to 2 μm thickness with a thickness deviation below 4% using the Helmholtz-Zentrum Geesthacht large area sputtering system. The 10B4C coatings are x-ray amorphous and highly adhesive to the substrate. Material analysis by means of X-ray-Photoelectron Spectroscopy, Secondary-Ion-Mass-Spectrometry, and Rutherford-Back-Scattering (RBS) revealed low impurities concentration in the coatings. The isotope composition determined by Secondary-Ion-Mass-Spectrometry, RBS, and inelastic nuclear reaction analysis of the converter coatings evidences almost identical 10B isotope contents in the sputter target and in the deposited coating. Neutron conversion and detection test measurements with variable irradiation geometry of the converter coating demonstrate an average relative quantum efficiency ranging from 65% to 90% for cold neutrons as compared to a black 3He-monitor. Thus, these converter coatings contribute to the development of 3He-free prototype detectors based on neutron grazing incidence. Transferring the developed coating process to an industrial scale sputtering system can make alternative 3He-free converter elements available for large area neutron detection systems.


  • First Direct Study of the Ammonolysis Reaction in the Most Common Alkaline and Alkaline Earth Metal Hydrides by in Situ SR-PXD

    by C. Pistidda, A. Santoru, S. Garroni, N. Bergemann, A. Rzeszutek, C. Horstmann, D. Thomas, T. Klassen, M. Dornheim


  • Hydrogen storage systems from waste Mg alloys

    by C. Pistidda, N. Bergemann, J. Wurr, A. Rzeszutek, K.T. Møller, B.R.S. Hansen, S. Garroni, C. Horstmann, C. Milanese, A. Girella, et al.