Lorenzo Teppati Losè
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Lorenzo Teppati Losè has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Filiberto Chiabrando
Department of Architecture and Design (DAD), Polytechnic University of Turin, Viale Pier Andrea Mattioli 39, 10125 Torino, Italy
23 shared publications - Antonia Spanò
Politecnico di Torino
8 shared publications - Giulia Sammartano
Politecnico di Torino
8 shared publications - Alessio Calantropio
Department of Science and Technology, University of Napoli Parthenope, Napoli, Italy
7 shared publications - Fulvio Rinaudo
Department of Architecture and Design, Polytechnic University of Turin, Viale Pier Andrea Mattioli 39, 10125 Torino, Italy
6 shared publications - Elisabetta Colucci
Politecnico di Torino
4 shared publications
Latest Publications
- Open Access
- 23 July 2026
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLIX-B2-20, 901-908
GNSS–Camera Systems for Heritage Documentation. Accuracy assessment of measurements of inaccessible points and preliminary tests in photogrammetric applications
The measurement of Ground Control Points is a crucial but time-consuming step in photogrammetric surveys, especially in the Built Heritage domain. This study investigates the use of a new generation Global Navigation Satellite System receiver equipped with an integrated camera to measure inaccessible points (to be used as GCPs, e.g. on building façades), combining satellite positioning and photogrammetry in a single device. The approach was tested on a historical building using both the tested GNSS-camera system and traditional Total Station topographic measurements as reference. Results show that the proposed method can achieve centimetric accuracy, with horizontal and vertical errors of about 3-5 cm (in line with the adopted NRTK service). While a small systematic shift was observed, the overall geometric consistency of the measured points remained within acceptable limits for many heritage documentation applications. Additionally, the georeferenced images acquired by the system were successfully used in a Structure from Motion (SfM) direct georeferencing workflow, producing 3D models and orthophotos with good metric reliability when compared to other data, such as TLS scans. The study demonstrates that GNSS-camera systems can significantly reduce fieldwork time while providing reliable spatial data, representing a promising solution to be integrated into heritage documentation pipelines in an efficient and flexible way.
- 23 July 2026
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLIX-B2-20, 901-908
Open AccessGNSS–Camera Systems for Heritage Documentation. Accuracy assessment of measurements of inaccessible points and preliminary tests in photogrammetric applications
The measurement of Ground Control Points is a crucial but time-consuming step in photogrammetric surveys, especially in the Built Heritage domain. This study investigates the use of a new generation Global Navigation Satellite System receiver equipped with an integrated camera to measure inaccessible points (to be used as GCPs, e.g. on building façades), combining satellite positioning and photogrammetry in a single device. The approach was tested on a historical building using both the tested GNSS-camera system and traditional Total Station topographic measurements as reference. Results show that the proposed method can achieve centimetric accuracy, with horizontal and vertical errors of about 3-5 cm (in line with the adopted NRTK service). While a small systematic shift was observed, the overall geometric consistency of the measured points remained within acceptable limits for many heritage documentation applications. Additionally, the georeferenced images acquired by the system were successfully used in a Structure from Motion (SfM) direct georeferencing workflow, producing 3D models and orthophotos with good metric reliability when compared to other data, such as TLS scans. The study demonstrates that GNSS-camera systems can significantly reduce fieldwork time while providing reliable spatial data, representing a promising solution to be integrated into heritage documentation pipelines in an efficient and flexible way.
- Open Access
- 4 October 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-9, 1483-1490
The SUNRISE Summer School. A Report on the First Two Editions
The SUNRISE Summer School (Seashore and UNderwater documentation of aRchaeological herItage palimpSests and Environment) has reached its second edition. The school was co-organised by the Politecnico di Torino and the Italian Society of Photogrammetry and Topography (SIFET) and supported by the International Society of Photogrammetry and Remote Sensing (ISPRS), CIPA HD and several other Italian institutions. The second edition of the summer school took place in the municipality of Porto Cesareo (LE - Italy) from September 8 to 14, 2024, and involved 24 students – architects, engineers, archaeologists, and marine ecologists from Europe, the United States, Latin America, and Asia. The school started from the experience built in the first edition, and throughout the entire duration of the event, the students were guided by 23 tutors, ensuring an almost one-to-one student-tutor ratio. The school offered theoretical activities with lectures and fieldwork, applying a learning-by-doing teaching approach. Two sites were the focus of the fieldwork: Torre Chianca (a 16th-century defensive building) and the Roman marble columns (a submerged archaeological site). Both sites are part of the protected marine area of Porto Cesareo. Field data collection was supported by representatives from various companies: Images, Microgeo, Stonex, Pix4D, Geomax, Leica, Dynatech, and 3DTarget (the companies were also sponsors of the initiative), who demonstrated the latest technologies for integrated multi-sensor surveying of cultural heritage, such as drones, terrestrial and aerial laser scanners, and mobile mapping systems.
- 4 October 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-9, 1483-1490
Open AccessThe SUNRISE Summer School. A Report on the First Two Editions
The SUNRISE Summer School (Seashore and UNderwater documentation of aRchaeological herItage palimpSests and Environment) has reached its second edition. The school was co-organised by the Politecnico di Torino and the Italian Society of Photogrammetry and Topography (SIFET) and supported by the International Society of Photogrammetry and Remote Sensing (ISPRS), CIPA HD and several other Italian institutions. The second edition of the summer school took place in the municipality of Porto Cesareo (LE - Italy) from September 8 to 14, 2024, and involved 24 students – architects, engineers, archaeologists, and marine ecologists from Europe, the United States, Latin America, and Asia. The school started from the experience built in the first edition, and throughout the entire duration of the event, the students were guided by 23 tutors, ensuring an almost one-to-one student-tutor ratio. The school offered theoretical activities with lectures and fieldwork, applying a learning-by-doing teaching approach. Two sites were the focus of the fieldwork: Torre Chianca (a 16th-century defensive building) and the Roman marble columns (a submerged archaeological site). Both sites are part of the protected marine area of Porto Cesareo. Field data collection was supported by representatives from various companies: Images, Microgeo, Stonex, Pix4D, Geomax, Leica, Dynatech, and 3DTarget (the companies were also sponsors of the initiative), who demonstrated the latest technologies for integrated multi-sensor surveying of cultural heritage, such as drones, terrestrial and aerial laser scanners, and mobile mapping systems.
- Open Access
- 23 September 2025
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-M-2-2025, 65-72
Addressing Flood Risk Assessment and Heritage Conservation by Integrating HBIM and GIS: The Case Study of Castello del Valentino (Italy)
Climate change and increasingly frequent extreme weather events pose critical threats to cultural heritage, particularly flood-prone historic sites. This study presents an integrated workflow combining Historic Building Information Modelling (HBIM) and Geographic Information Systems (GIS) for flood risk assessment and heritage conservation. The methodology is applied to the Valentino Castle in Turin, a UNESCO-listed site located along the Po River, vulnerable to recurrent flood events. A semantically rich HBIM model was developed from high-resolution point cloud data to document the architectural and material characteristics of the castle. This model was then integrated into a multi-scale 3D GIS environment to simulate various flood scenarios and assess their impact on building elements. The workflow addresses technical challenges such as BIM-GIS interoperability, semantic-geometric translation, and applying Level of Information Need (LOIN) in heritage contexts. The resulting framework allows for detailed, spatially accurate vulnerability assessments and supports decision-making for risk mitigation, preservation planning, and stakeholder communication. While Valentino Castle is the case study for this first methodological validation, the proposed method is scalable and adaptable to other heritage sites. Integrating HBIM and GIS proves to be a valuable tool for protecting cultural assets in the face of climate-induced hazards.
- 23 September 2025
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-M-2-2025, 65-72
Open AccessAddressing Flood Risk Assessment and Heritage Conservation by Integrating HBIM and GIS: The Case Study of Castello del Valentino (Italy)
Climate change and increasingly frequent extreme weather events pose critical threats to cultural heritage, particularly flood-prone historic sites. This study presents an integrated workflow combining Historic Building Information Modelling (HBIM) and Geographic Information Systems (GIS) for flood risk assessment and heritage conservation. The methodology is applied to the Valentino Castle in Turin, a UNESCO-listed site located along the Po River, vulnerable to recurrent flood events. A semantically rich HBIM model was developed from high-resolution point cloud data to document the architectural and material characteristics of the castle. This model was then integrated into a multi-scale 3D GIS environment to simulate various flood scenarios and assess their impact on building elements. The workflow addresses technical challenges such as BIM-GIS interoperability, semantic-geometric translation, and applying Level of Information Need (LOIN) in heritage contexts. The resulting framework allows for detailed, spatially accurate vulnerability assessments and supports decision-making for risk mitigation, preservation planning, and stakeholder communication. While Valentino Castle is the case study for this first methodological validation, the proposed method is scalable and adaptable to other heritage sites. Integrating HBIM and GIS proves to be a valuable tool for protecting cultural assets in the face of climate-induced hazards.
- Open Access
A Systematic Literature Review to Assist in Defining New Guidelines and Practical Handbooks for the Documentation of Built Heritage
The documentation of cultural heritage, particularly built heritage, represents a critical component in ensuring its preservation, sustainable management, and effective transmission to future generations. As the field increasingly undergoes a digital transformation, there is a growing need for structured, standardised approaches that can guide professionals and stakeholders through the complexities of documentation practices. Despite the availability of numerous standards and charters, a clear synthesis of consolidated methodologies and recent technological shifts remains limited. This study addresses this gap by conducting a Systematic Literature Review (SLR) to assess current documentation practices. The research is part of a larger initiative funded by the FSE REACT-EU programme under the Italian PON Ricerca e Innovazione 2014–2020, specifically aiming to support public and private stakeholders in developing practical documentation strategies. Using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) framework, over 266 publications were analysed to reconstruct the state of the art. The findings confirm widely adopted practices among research groups while also highlighting emerging trends driven by technological advancements in geomatics. These insights will contribute to the formulation of practical guidelines to support operators in the field and reinforce the integration of innovative tools in Cultural Heritage documentation workflows.
Open AccessA Systematic Literature Review to Assist in Defining New Guidelines and Practical Handbooks for the Documentation of Built Heritage
The documentation of cultural heritage, particularly built heritage, represents a critical component in ensuring its preservation, sustainable management, and effective transmission to future generations. As the field increasingly undergoes a digital transformation, there is a growing need for structured, standardised approaches that can guide professionals and stakeholders through the complexities of documentation practices. Despite the availability of numerous standards and charters, a clear synthesis of consolidated methodologies and recent technological shifts remains limited. This study addresses this gap by conducting a Systematic Literature Review (SLR) to assess current documentation practices. The research is part of a larger initiative funded by the FSE REACT-EU programme under the Italian PON Ricerca e Innovazione 2014–2020, specifically aiming to support public and private stakeholders in developing practical documentation strategies. Using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) framework, over 266 publications were analysed to reconstruct the state of the art. The findings confirm widely adopted practices among research groups while also highlighting emerging trends driven by technological advancements in geomatics. These insights will contribute to the formulation of practical guidelines to support operators in the field and reinforce the integration of innovative tools in Cultural Heritage documentation workflows.
- Open Access
Moving Toward the Next Generation of HMLS—Testing and Validating the Performances of Second-Generation SLAM Systems Compared to Predecessors
Among the different activities of the AEC (Architecture, Engineering, and Construction) sector, the documentation phase is pivotal and covers the entire lifecycle of a building or infrastructure. In the last decade, in the geomatic field, technology has evolved rapidly, and several instruments and techniques have become available to assist operators in this documentation process. Furthermore, the AEC sector is moving toward the extensive use of Digital Twins, and the research presented in this paper focuses on the technological solutions available today for creating the metric and geometric base of the Digital Twin at the service of AEC sector. Geomatics instruments and techniques are widely adopted in this framework, particularly HMLS (Handheld Mobile Laser Scanner). This research will evaluate the differences in performances between the first and second generation of HMLS based on SLAM (Simultaneous Localisation and Mapping) technologies in terms of accuracy, precision, level of detail, data density, noise, and other relevant characteristics. To address the research questions of this work, it was decided to perform a series of tests in an ad hoc test field following predefined acquisition strategies and procedures. A series of analyses were then conducted on the processed data to evaluate several factors, particularly georeferencing of HMLS data, features analyses on specific areas, Cloud-to-Cloud analysis, and cross-sections analysis.
Open AccessMoving Toward the Next Generation of HMLS—Testing and Validating the Performances of Second-Generation SLAM Systems Compared to Predecessors
Among the different activities of the AEC (Architecture, Engineering, and Construction) sector, the documentation phase is pivotal and covers the entire lifecycle of a building or infrastructure. In the last decade, in the geomatic field, technology has evolved rapidly, and several instruments and techniques have become available to assist operators in this documentation process. Furthermore, the AEC sector is moving toward the extensive use of Digital Twins, and the research presented in this paper focuses on the technological solutions available today for creating the metric and geometric base of the Digital Twin at the service of AEC sector. Geomatics instruments and techniques are widely adopted in this framework, particularly HMLS (Handheld Mobile Laser Scanner). This research will evaluate the differences in performances between the first and second generation of HMLS based on SLAM (Simultaneous Localisation and Mapping) technologies in terms of accuracy, precision, level of detail, data density, noise, and other relevant characteristics. To address the research questions of this work, it was decided to perform a series of tests in an ad hoc test field following predefined acquisition strategies and procedures. A series of analyses were then conducted on the processed data to evaluate several factors, particularly georeferencing of HMLS data, features analyses on specific areas, Cloud-to-Cloud analysis, and cross-sections analysis.
- Open Access
- 25 March 2025
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 14 (4) , 139
Documentation for Architectural Heritage: A Historical Building Information Modeling Data Modeling Approach for the Valentino Castle North Wing
Although HBIM (Historical Building Information Modeling) excels in geometric data acquisition and modeling within Scan-to-BIM (Building Information Modeling) workflows, its application in digital documentation faces persistent challenges, such as balancing precision and efficiency, ambiguous information structures, and the absence of standardized protocols. To address these issues, this study refines key steps from the systematic Scan-to-BIM process and proposes a documentation-oriented HBIM workflow. The workflow is designed to tackle data complexity and semantic alignment challenges through detailed strategic planning, standard data collection, efficient geometric modeling, and ontology-based information integration. Validated in the Valentino Castle’s north wing digital archiving project, the proposed framework emphasizes archival management and standardization, reducing reliance on high-precision point cloud data and complex geometric modeling. Instead, it adopts low-precision geometric models as information storage containers, employing standardized information structures to manage and transfer heterogeneous data. Key contributions include the following: (1) establishing a requirements-driven and model-level-based framework for standardized project management; (2) introducing a component alignment concept to harmonize IFC (Industry Foundation Classes) standards and traditional terminologies; and (3) developing a four-level information structure to enhance HBIM parameter and database management. The workflow significantly reduces data acquisition and modeling time while offering a replicable methodology for heritage documentation, promoting cross-disciplinary collaboration and standardization in digital preservation practices.
- 25 March 2025
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 14 (4) , 139
Open AccessDocumentation for Architectural Heritage: A Historical Building Information Modeling Data Modeling Approach for the Valentino Castle North Wing
Although HBIM (Historical Building Information Modeling) excels in geometric data acquisition and modeling within Scan-to-BIM (Building Information Modeling) workflows, its application in digital documentation faces persistent challenges, such as balancing precision and efficiency, ambiguous information structures, and the absence of standardized protocols. To address these issues, this study refines key steps from the systematic Scan-to-BIM process and proposes a documentation-oriented HBIM workflow. The workflow is designed to tackle data complexity and semantic alignment challenges through detailed strategic planning, standard data collection, efficient geometric modeling, and ontology-based information integration. Validated in the Valentino Castle’s north wing digital archiving project, the proposed framework emphasizes archival management and standardization, reducing reliance on high-precision point cloud data and complex geometric modeling. Instead, it adopts low-precision geometric models as information storage containers, employing standardized information structures to manage and transfer heterogeneous data. Key contributions include the following: (1) establishing a requirements-driven and model-level-based framework for standardized project management; (2) introducing a component alignment concept to harmonize IFC (Industry Foundation Classes) standards and traditional terminologies; and (3) developing a four-level information structure to enhance HBIM parameter and database management. The workflow significantly reduces data acquisition and modeling time while offering a replicable methodology for heritage documentation, promoting cross-disciplinary collaboration and standardization in digital preservation practices.
- Open Access
3D Representation of Rituals in HBIM: The Central Pillar and Fire Pit Space in the Tibetan-Yi Corridor
In architectural heritage research, rituals and human activities are often overlooked but are crucial for maintaining authenticity and reflecting various cultural values. In the Tibetan-Yi Corridor, one of China’s most renowned heritage routes, rituals and behaviours around the central pillar or fire pit reflect the shared culture and history of Di-Qiang ethnic groups, serving as critical indicators in studying their origins. A scientific method linking physical spaces with intangible cultural information is essential to preserve these rituals or activities and understand their interactions with architectural spaces. This study introduces a method utilising HBIM technology to document and analyse the 3D structures of Di-Qiang ethnic architecture and the rituals. It deconstructs rituals into bodily movements represented within the BIM space to simulate the behaviours of various roles. This method visualises ritual types and critical information by encoding different rituals and movements through geometric shapes, sizes, and colours, effectively linking architectural spaces with intangible cultural elements. The study’s two main contributions are (i) the HBIM archival method for Di-Qiang ethnic architecture, standardising geometric modelling and semantic information recording to digitise Di-Qiang architectural heritage, and forming a foundational 3D model library and semantic database; and (ii) the 3D representation method for ritual movements, which offers a way to manage intangible cultural information and spatially assess cultural behaviours, and evaluates the authenticity and quality of architectural heritage by analysing bodily rituals in space. This approach introduces a novel method for documenting and researching intangible heritage in cultural studies. Additionally, the digital technology-based research method offers a convenient platform for integrating and connecting digital heritage with digital humanities in the future.
Open Access3D Representation of Rituals in HBIM: The Central Pillar and Fire Pit Space in the Tibetan-Yi Corridor
In architectural heritage research, rituals and human activities are often overlooked but are crucial for maintaining authenticity and reflecting various cultural values. In the Tibetan-Yi Corridor, one of China’s most renowned heritage routes, rituals and behaviours around the central pillar or fire pit reflect the shared culture and history of Di-Qiang ethnic groups, serving as critical indicators in studying their origins. A scientific method linking physical spaces with intangible cultural information is essential to preserve these rituals or activities and understand their interactions with architectural spaces. This study introduces a method utilising HBIM technology to document and analyse the 3D structures of Di-Qiang ethnic architecture and the rituals. It deconstructs rituals into bodily movements represented within the BIM space to simulate the behaviours of various roles. This method visualises ritual types and critical information by encoding different rituals and movements through geometric shapes, sizes, and colours, effectively linking architectural spaces with intangible cultural elements. The study’s two main contributions are (i) the HBIM archival method for Di-Qiang ethnic architecture, standardising geometric modelling and semantic information recording to digitise Di-Qiang architectural heritage, and forming a foundational 3D model library and semantic database; and (ii) the 3D representation method for ritual movements, which offers a way to manage intangible cultural information and spatially assess cultural behaviours, and evaluates the authenticity and quality of architectural heritage by analysing bodily rituals in space. This approach introduces a novel method for documenting and researching intangible heritage in cultural studies. Additionally, the digital technology-based research method offers a convenient platform for integrating and connecting digital heritage with digital humanities in the future.
- Open Access
- 11 June 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-2-2, 265-272
POSER: an oPen sOurce Simulation platform for tEaching and tRaining underwater photogrammetry
Underwater photogrammetry presents unique challenges due to the optical properties of water that, if not correctly taken into account, might affect the quality of the survey and the related 2D and 3D products. It is recognized nowadays the importance to train newcomers to underwater surveying, and extend and consolidate the knowledge of best practices for underwater data acquisition. Starting from this consideration, we propose the development of POSER, a 3D simulation framework designed to facilitate the teaching of underwater imaging principles. The project, an ISPRS Educational and Capacity Building Initiative, is built upon the open-source platform Blender, incorporating realistic modelling of the physical properties of water, including light refraction, scattering, and absorption phenomena, to simulate underwater surveying conditions. We foster a learning-by-doing approach, providing users with ready-to-use application scenarios inspired by real-life case studies. They will cover a range of application fields, from marine ecology to archaeology and subsea metrology, and allow users to address the complexities of underwater surveying practices. This paper introduces POSER to the community, presenting its educational vocation and describing its constituent components.
- 11 June 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-2-2, 265-272
Open AccessPOSER: an oPen sOurce Simulation platform for tEaching and tRaining underwater photogrammetry
Underwater photogrammetry presents unique challenges due to the optical properties of water that, if not correctly taken into account, might affect the quality of the survey and the related 2D and 3D products. It is recognized nowadays the importance to train newcomers to underwater surveying, and extend and consolidate the knowledge of best practices for underwater data acquisition. Starting from this consideration, we propose the development of POSER, a 3D simulation framework designed to facilitate the teaching of underwater imaging principles. The project, an ISPRS Educational and Capacity Building Initiative, is built upon the open-source platform Blender, incorporating realistic modelling of the physical properties of water, including light refraction, scattering, and absorption phenomena, to simulate underwater surveying conditions. We foster a learning-by-doing approach, providing users with ready-to-use application scenarios inspired by real-life case studies. They will cover a range of application fields, from marine ecology to archaeology and subsea metrology, and allow users to address the complexities of underwater surveying practices. This paper introduces POSER to the community, presenting its educational vocation and describing its constituent components.
- Open Access
- 14 February 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-2/W, 437-444
FROM 3D METRIC SURVEY TO HBIM MODEL. TESTING OF DIFFERENT SCAN2BIM APPROACHES FOR THE ARCHAEOLOGICAL DOCUMENTATION
The research presented in this work is focused on describing part of the activities related to the 1st edition of the SUNRISE Summer School (Seashore and UNderwater documentation of aRchaeological herItage palimpSests and Environment) and a comprehensive approach to the documentation of an archaeological site. In the paper data acquisition and processing will be described in detail, together with the design of the survey project and the main specifications of the sensors and techniques adopted. The 3D metric data derived from the use of these consolidated geomatics techniques were validated during the processing and used as the basis for the generation of other added-value products: traditional 2D drawings and an HBIM model. More specifically, two different approaches for the modelling phase were followed: a more consolidated approach driven by the 2D representation and a more experimental one that foresaw NURBS modelling from the point clouds. The pros and cons of both approaches will be analyzed, and a metric validation of each strategy will be presented. In the paper's conclusions, some considerations are summarized on the use of HBIM for the management of the archaeological data, together with some further perspectives.
- 14 February 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-2/W, 437-444
Open AccessFROM 3D METRIC SURVEY TO HBIM MODEL. TESTING OF DIFFERENT SCAN2BIM APPROACHES FOR THE ARCHAEOLOGICAL DOCUMENTATION
The research presented in this work is focused on describing part of the activities related to the 1st edition of the SUNRISE Summer School (Seashore and UNderwater documentation of aRchaeological herItage palimpSests and Environment) and a comprehensive approach to the documentation of an archaeological site. In the paper data acquisition and processing will be described in detail, together with the design of the survey project and the main specifications of the sensors and techniques adopted. The 3D metric data derived from the use of these consolidated geomatics techniques were validated during the processing and used as the basis for the generation of other added-value products: traditional 2D drawings and an HBIM model. More specifically, two different approaches for the modelling phase were followed: a more consolidated approach driven by the 2D representation and a more experimental one that foresaw NURBS modelling from the point clouds. The pros and cons of both approaches will be analyzed, and a metric validation of each strategy will be presented. In the paper's conclusions, some considerations are summarized on the use of HBIM for the management of the archaeological data, together with some further perspectives.
- Open Access
- 26 June 2023
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-2, 1557-1564
DIRECT GEOREFERENCING APPROACHES FOR CLOSE-RANGE AND UAV PHOTOGRAMMETRY IN THE BUILT HERITAGE DOMAIN
Direct georeferencing uses onboard sensors to measure the position and orientation of the camera during image acquisition for photogrammetric applications. This approach aims to eliminate the use of traditional Ground Control Points (GCPs) in the photogrammetric process in order to reduce the costs and the time of the survey operations. The direct georeferencing technique involves integrating measurements from inertial measurement units (IMUs) and Global Navigation Satellite Systems (GNSS) data in order to evaluate the position and attitude of the camera with high accuracy (a few centimeters). In the Built Heritage survey domain, this approach is mainly followed by the employment of UAVs (Uncrewed aerial systems) platforms that are nowadays equipped with highly accurate systems able to evaluate the external parameters for the photogrammetric process. For terrestrial applications, few already achieved tests were performed; moreover, the sensors today available for extracting information from close-range acquisition systems are limited and sometimes under development. To evaluate the possibility offered by these new direct georeferencing tools, a test on the 3D ImageVector (REDcatch GmbH) has been performed. The results and the strategies followed will be presented and analyzed in order to understand better the accuracy and the potentiality of this new promising approach.
- 26 June 2023
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-2, 1557-1564
Open AccessDIRECT GEOREFERENCING APPROACHES FOR CLOSE-RANGE AND UAV PHOTOGRAMMETRY IN THE BUILT HERITAGE DOMAIN
Direct georeferencing uses onboard sensors to measure the position and orientation of the camera during image acquisition for photogrammetric applications. This approach aims to eliminate the use of traditional Ground Control Points (GCPs) in the photogrammetric process in order to reduce the costs and the time of the survey operations. The direct georeferencing technique involves integrating measurements from inertial measurement units (IMUs) and Global Navigation Satellite Systems (GNSS) data in order to evaluate the position and attitude of the camera with high accuracy (a few centimeters). In the Built Heritage survey domain, this approach is mainly followed by the employment of UAVs (Uncrewed aerial systems) platforms that are nowadays equipped with highly accurate systems able to evaluate the external parameters for the photogrammetric process. For terrestrial applications, few already achieved tests were performed; moreover, the sensors today available for extracting information from close-range acquisition systems are limited and sometimes under development. To evaluate the possibility offered by these new direct georeferencing tools, a test on the 3D ImageVector (REDcatch GmbH) has been performed. The results and the strategies followed will be presented and analyzed in order to understand better the accuracy and the potentiality of this new promising approach.