Huanlei Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Huanlei Wang has a total of 343 co-authors. Here are the top co-authors by number of shared publications:
Jing Shi
44 shared publications- Minghua Huang
School of Materials Science and Engineering Ocean University of China Qingdao China
28 shared publications - Jing Shi
School of Materials Science and Engineering Ocean University of China Qingdao China
21 shared publications Jingwei Chen
20 shared publicationsMinghua Huang
20 shared publicationsWeiqian Tian
20 shared publications
Latest Publications
- 13 November 2026
- Published by Wiley in Advanced Functional Materials
Electrostatically Engineered Soft Interphases Enable Fast Ion Transport in High‐Loading Solid‐State Cathodes
High‐energy density solid‐state batteries are constrained by sluggish ion transport in thick composite cathodes, where increasing active material loading amplifies ionic transport limitations. Incorporating fast ion conductors into cathode architectures offers a promising approach to accelerate lithium‐ion diffusion. However, severe interparticle ionic resistance between conductor particles remains a major obstacle to achieving practical high mass loadings. Here, we propose a soft interface strategy based on the electrostatic self‐assembly of carboxymethyl chitosan onto Li 0.33 La 0.56 TiO 3 nanoparticles to construct a compliant ion‐conducting interfacial layer. This interfacial architecture simultaneously strengthens interparticle contact, and establishes continuous ion transport pathways, thereby effectively overcoming the ion transport bottlenecks that limit high‐loading cathodes. The LiNi 0.6 Co 0.2 Mn 0.2 O 2 composite cathodes (20 mg cm −2 ) deliver an areal capacity of 2.2 mAh cm −2 at 2 C (7.2 Ma cm −2 ) at room temperature, and the strategy is successfully extended to lean lithium and anode‐free solid‐state batteries. This work establishes a soft interface design strategy for overcoming interfacial ion transport limitations and provides an effective route toward practical high‐energy density and fast‐charging solid‐state batteries.
- 13 November 2026
- Published by Wiley in Advanced Functional Materials
Electrostatically Engineered Soft Interphases Enable Fast Ion Transport in High‐Loading Solid‐State Cathodes
High‐energy density solid‐state batteries are constrained by sluggish ion transport in thick composite cathodes, where increasing active material loading amplifies ionic transport limitations. Incorporating fast ion conductors into cathode architectures offers a promising approach to accelerate lithium‐ion diffusion. However, severe interparticle ionic resistance between conductor particles remains a major obstacle to achieving practical high mass loadings. Here, we propose a soft interface strategy based on the electrostatic self‐assembly of carboxymethyl chitosan onto Li 0.33 La 0.56 TiO 3 nanoparticles to construct a compliant ion‐conducting interfacial layer. This interfacial architecture simultaneously strengthens interparticle contact, and establishes continuous ion transport pathways, thereby effectively overcoming the ion transport bottlenecks that limit high‐loading cathodes. The LiNi 0.6 Co 0.2 Mn 0.2 O 2 composite cathodes (20 mg cm −2 ) deliver an areal capacity of 2.2 mAh cm −2 at 2 C (7.2 Ma cm −2 ) at room temperature, and the strategy is successfully extended to lean lithium and anode‐free solid‐state batteries. This work establishes a soft interface design strategy for overcoming interfacial ion transport limitations and provides an effective route toward practical high‐energy density and fast‐charging solid‐state batteries.
- 21 October 2026
- Published by Wiley in Angewandte Chemie
Asymmetric Zn‐N 4 Single Atom Sites Facilitate Interfacial Desolvation for Ultrafast Zinc‐Ion Storage
Aqueous zinc‐ion hybrid capacitors (ZIHCs) offer a promising route to safe and low‐cost energy storage, yet their rate performance is constrained by sluggish interfacial desolvation of hydrated Zn 2+ ions and the limited electric double‐layer capacitance of carbon cathodes. Here, we introduce a dual interfacial regulation strategy that addresses both limitations through defect‐modulated Zn‐N 4 single atom sites embedded in carbon cathodes. Spectroscopic studies and theoretical calculations reveal that defect‐induced electronic asymmetry downshifts the Zn d ‐band center and generates nonbonding N/C 2 p states near the Fermi level, facilitating Zn 2+ ─H 2 O bond dissociation and accelerating interfacial desolvation. Simultaneously, enhanced electron delocalization increases surface charge density, favoring electric double‐layer formation and rapid charge accumulation. As a result, the optimized ZIHC delivers a high specific capacity of 201.5 mAh g −1 and an energy density of 146.5 Wh kg −1 , excellent rate capability (56% capacity retention at 100 A g −1 ) and long‐term durability (92.1% retention after 110,000 cycles). In situ and ex situ characterizations reveal a surface‐dominated storage mechanism involving facilitated Zn 2+ desolvation and reversible interfacial adsorption. This work establishes asymmetric single atom coordination as an effective design strategy for coupling interfacial desolvation with charge regulation in high‐rate aqueous energy storage.
- 21 October 2026
- Published by Wiley in Angewandte Chemie
Asymmetric Zn‐N 4 Single Atom Sites Facilitate Interfacial Desolvation for Ultrafast Zinc‐Ion Storage
Aqueous zinc‐ion hybrid capacitors (ZIHCs) offer a promising route to safe and low‐cost energy storage, yet their rate performance is constrained by sluggish interfacial desolvation of hydrated Zn 2+ ions and the limited electric double‐layer capacitance of carbon cathodes. Here, we introduce a dual interfacial regulation strategy that addresses both limitations through defect‐modulated Zn‐N 4 single atom sites embedded in carbon cathodes. Spectroscopic studies and theoretical calculations reveal that defect‐induced electronic asymmetry downshifts the Zn d ‐band center and generates nonbonding N/C 2 p states near the Fermi level, facilitating Zn 2+ ─H 2 O bond dissociation and accelerating interfacial desolvation. Simultaneously, enhanced electron delocalization increases surface charge density, favoring electric double‐layer formation and rapid charge accumulation. As a result, the optimized ZIHC delivers a high specific capacity of 201.5 mAh g −1 and an energy density of 146.5 Wh kg −1 , excellent rate capability (56% capacity retention at 100 A g −1 ) and long‐term durability (92.1% retention after 110,000 cycles). In situ and ex situ characterizations reveal a surface‐dominated storage mechanism involving facilitated Zn 2+ desolvation and reversible interfacial adsorption. This work establishes asymmetric single atom coordination as an effective design strategy for coupling interfacial desolvation with charge regulation in high‐rate aqueous energy storage.
- 21 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e7149723
Asymmetric Zn‐N 4 Single Atom Sites Facilitate Interfacial Desolvation for Ultrafast Zinc‐Ion Storage
Aqueous zinc‐ion hybrid capacitors (ZIHCs) offer a promising route to safe and low‐cost energy storage, yet their rate performance is constrained by sluggish interfacial desolvation of hydrated Zn 2+ ions and the limited electric double‐layer capacitance of carbon cathodes. Here, we introduce a dual interfacial regulation strategy that addresses both limitations through defect‐modulated Zn‐N 4 single atom sites embedded in carbon cathodes. Spectroscopic studies and theoretical calculations reveal that defect‐induced electronic asymmetry downshifts the Zn d ‐band center and generates nonbonding N/C 2 p states near the Fermi level, facilitating Zn 2+ ─H 2 O bond dissociation and accelerating interfacial desolvation. Simultaneously, enhanced electron delocalization increases surface charge density, favoring electric double‐layer formation and rapid charge accumulation. As a result, the optimized ZIHC delivers a high specific capacity of 201.5 mAh g −1 and an energy density of 146.5 Wh kg −1 , excellent rate capability (56% capacity retention at 100 A g −1 ) and long‐term durability (92.1% retention after 110,000 cycles). In situ and ex situ characterizations reveal a surface‐dominated storage mechanism involving facilitated Zn 2+ desolvation and reversible interfacial adsorption. This work establishes asymmetric single atom coordination as an effective design strategy for coupling interfacial desolvation with charge regulation in high‐rate aqueous energy storage.
- 21 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e7149723
Asymmetric Zn‐N 4 Single Atom Sites Facilitate Interfacial Desolvation for Ultrafast Zinc‐Ion Storage
Aqueous zinc‐ion hybrid capacitors (ZIHCs) offer a promising route to safe and low‐cost energy storage, yet their rate performance is constrained by sluggish interfacial desolvation of hydrated Zn 2+ ions and the limited electric double‐layer capacitance of carbon cathodes. Here, we introduce a dual interfacial regulation strategy that addresses both limitations through defect‐modulated Zn‐N 4 single atom sites embedded in carbon cathodes. Spectroscopic studies and theoretical calculations reveal that defect‐induced electronic asymmetry downshifts the Zn d ‐band center and generates nonbonding N/C 2 p states near the Fermi level, facilitating Zn 2+ ─H 2 O bond dissociation and accelerating interfacial desolvation. Simultaneously, enhanced electron delocalization increases surface charge density, favoring electric double‐layer formation and rapid charge accumulation. As a result, the optimized ZIHC delivers a high specific capacity of 201.5 mAh g −1 and an energy density of 146.5 Wh kg −1 , excellent rate capability (56% capacity retention at 100 A g −1 ) and long‐term durability (92.1% retention after 110,000 cycles). In situ and ex situ characterizations reveal a surface‐dominated storage mechanism involving facilitated Zn 2+ desolvation and reversible interfacial adsorption. This work establishes asymmetric single atom coordination as an effective design strategy for coupling interfacial desolvation with charge regulation in high‐rate aqueous energy storage.
- 18 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (19) , 19662-19673
Unlocking Vacancy-Inherited Reconstruction of Metal-Organic Frameworks toward Water Oxidation
Elucidating the dynamic reconstruction pathways of electrocatalysts under oxygen evolution reaction (OER) conditions is essential for understanding the origin of catalytic activity, yet remains challenging. Here, using an oxygen-vacancy-rich nickel-based metal-organic framework (Vo-Ni-MOF) as a model platform, we reveal a vacancy-inherited reconstruction pathway in which Vo-Ni-MOF undergoes in situ reconstruction into vacancy-retaining nickel oxyhydroxide (Vo-NiOOH) for efficient OER. By combining multimodal operando spectroscopy with theoretical calculations, we uncover a stepwise coordination evolution of Ni centres from octahedral NiO6 to penta-coordinated NiO5 and ultimately to a high-valent, tetra-coordinated NiO4 configuration under OER conditions. The resulting oxygen-vacancy-rich Vo-NiOOH exhibits enhanced OH– affinity, which facilitates O–O bond formation and subsequent OOH* intermediate generation, thereby lowering the thermodynamic demand of the O* → OOH* rate-determining step. Meanwhile, defect-induced local electronic reorganization enhances the spin polarization of Ni centres and strengthens their spin interaction with adsorbed OOH*, providing a favorable high-spin configuration for its subsequent spin evolution toward triplet O2. Notably, Vo-NiOOH delivers 500 mA cm–2 at 306 mV with over 600 h stability, and the self-assembled anion exchange membrane water electrolyzer sustains 500 mA cm–2 at 1.70 V for 500 h. This work advances the mechanistic understanding of catalyst reconstruction under OER conditions and provides guidance for the rational design of high-performance OER catalysts.
- 18 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (19) , 19662-19673
Unlocking Vacancy-Inherited Reconstruction of Metal-Organic Frameworks toward Water Oxidation
Elucidating the dynamic reconstruction pathways of electrocatalysts under oxygen evolution reaction (OER) conditions is essential for understanding the origin of catalytic activity, yet remains challenging. Here, using an oxygen-vacancy-rich nickel-based metal-organic framework (Vo-Ni-MOF) as a model platform, we reveal a vacancy-inherited reconstruction pathway in which Vo-Ni-MOF undergoes in situ reconstruction into vacancy-retaining nickel oxyhydroxide (Vo-NiOOH) for efficient OER. By combining multimodal operando spectroscopy with theoretical calculations, we uncover a stepwise coordination evolution of Ni centres from octahedral NiO6 to penta-coordinated NiO5 and ultimately to a high-valent, tetra-coordinated NiO4 configuration under OER conditions. The resulting oxygen-vacancy-rich Vo-NiOOH exhibits enhanced OH– affinity, which facilitates O–O bond formation and subsequent OOH* intermediate generation, thereby lowering the thermodynamic demand of the O* → OOH* rate-determining step. Meanwhile, defect-induced local electronic reorganization enhances the spin polarization of Ni centres and strengthens their spin interaction with adsorbed OOH*, providing a favorable high-spin configuration for its subsequent spin evolution toward triplet O2. Notably, Vo-NiOOH delivers 500 mA cm–2 at 306 mV with over 600 h stability, and the self-assembled anion exchange membrane water electrolyzer sustains 500 mA cm–2 at 1.70 V for 500 h. This work advances the mechanistic understanding of catalyst reconstruction under OER conditions and provides guidance for the rational design of high-performance OER catalysts.
- 8 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (72)
Graphitic Nitrogen Regulates Chloride Utilization for Oxygen Reduction in Ampere‐Level Seawater‐Based Zinc‐Air Batteries
The Cl − ‐rich environment of seawater poses a persistent challenge to oxygen reduction reaction (ORR) in seawater‐based zinc‐air batteries (S‐ZABs). Although considerable progress has been made in mitigating Cl − ‐induced degradation, strategies that utilize Cl − for beneficial interfacial regulation remain underdeveloped. Herein, we develop a graphitic‐N‐rich N‐doped carbon catalyst (denoted as N Gr ‐HCS‐1000) that transforms Cl − from a poisoning species into an ORR promoter. In situ and quasi‐in situ spectroscopic analyses, together with theoretical calculations, reveal that graphitic‐N sites with relatively positive electronic character preferentially adsorb Cl − , thereby inducing local charge redistribution at adjacent carbon active sites. This Cl − ‐utilization strategy optimizes the electronic structure of the carbon active sites and balances the Gibbs free energy (ΔG) of ORR‐related intermediates, placing N Gr ‐HCS‐1000 near the volcano apex defined by ΔG *OOH and η ORR . Consequently, N Gr ‐HCS‐1000 achieves a high half‐wave potential of 0.92 V in seawater‐based electrolyte, 50 mV higher than that in the deionized‐water counterpart. The N Gr ‐HCS‐1000 further endows aqueous and solid‐state S‐ZABs with stable operation over a wide temperature range from −40°C to 60°C, while delivering a capacity of 6.95 Ah and an output power of 1.56 W in ampere‐hour‐scale S‐ZABs. This work highlights Cl − utilization as an effective strategy for enhancing ORR in seawater electrolytes.
- 8 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (72)
Graphitic Nitrogen Regulates Chloride Utilization for Oxygen Reduction in Ampere‐Level Seawater‐Based Zinc‐Air Batteries
The Cl − ‐rich environment of seawater poses a persistent challenge to oxygen reduction reaction (ORR) in seawater‐based zinc‐air batteries (S‐ZABs). Although considerable progress has been made in mitigating Cl − ‐induced degradation, strategies that utilize Cl − for beneficial interfacial regulation remain underdeveloped. Herein, we develop a graphitic‐N‐rich N‐doped carbon catalyst (denoted as N Gr ‐HCS‐1000) that transforms Cl − from a poisoning species into an ORR promoter. In situ and quasi‐in situ spectroscopic analyses, together with theoretical calculations, reveal that graphitic‐N sites with relatively positive electronic character preferentially adsorb Cl − , thereby inducing local charge redistribution at adjacent carbon active sites. This Cl − ‐utilization strategy optimizes the electronic structure of the carbon active sites and balances the Gibbs free energy (ΔG) of ORR‐related intermediates, placing N Gr ‐HCS‐1000 near the volcano apex defined by ΔG *OOH and η ORR . Consequently, N Gr ‐HCS‐1000 achieves a high half‐wave potential of 0.92 V in seawater‐based electrolyte, 50 mV higher than that in the deionized‐water counterpart. The N Gr ‐HCS‐1000 further endows aqueous and solid‐state S‐ZABs with stable operation over a wide temperature range from −40°C to 60°C, while delivering a capacity of 6.95 Ah and an output power of 1.56 W in ampere‐hour‐scale S‐ZABs. This work highlights Cl − utilization as an effective strategy for enhancing ORR in seawater electrolytes.
- Open Access
- 27 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (68) , e77277
Interfacial Bridging Ni Single Atoms Catalyze Ultrafast and Highly Reversible Conversion Between MoS 2 and Mo/K 2 S for Potassium‐Ion Batteries
Conversion‐type MoS 2 anodes for potassium‐ion batteries typically suffer from sluggish kinetics and insufficient reversible conversion, which leads to rapid capacity decay. Herein, we report a hierarchical, carbon‐confined MoS 2 architecture featuring bridging‐type Ni single‐atoms (Ni‐ONC/MoS 2 @NC). These Ni single atoms bridge the MoS 2 and the intercalated carbon through S‐Ni‐O coordination, establishing efficient interfacial electronic transfer channels, thereby enabling fast bidirectional reaction kinetics with a high reversible conversion ratio of 85.7%. Both i n situ and ex situ characterizations, alongside theoretical calculations reveal that the S‐Ni‐O catalytic sites lower the K + diffusion barrier in MoS 2 . The hybridization between Ni‐3d and S‐3p orbitals effectively promotes K 2 S adsorption, weakens the K‐S bonds, and catalyzes K 2 S decomposition. Notably, the S‐Ni‐O sites undergo coordination reconstruction from S 3 ‐Ni‐O 1 to S 1 ‐Ni‐O 3 during cycling, which stabilizes the MoS 2 /carbon interface and prevents the deactivation of catalytic sites, thereby enabling fast and highly reversible conversion reactions. Consequently, the Ni‐ONC/MoS 2 @NC electrode delivers exceptional rate performance (255 mAh g −1 at 10 A g −1 ) and long‐term cycling stability (260 mAh g −1 after 1200 cycles at 1 A g −1 ). This study highlights the critical role of single‐atom bridging catalytic interfaces in regulating conversion‐type K + storage and offers a new pathway for designing highly stable and reversible anodes.
- 27 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (68) , e77277
Open AccessInterfacial Bridging Ni Single Atoms Catalyze Ultrafast and Highly Reversible Conversion Between MoS 2 and Mo/K 2 S for Potassium‐Ion Batteries
Conversion‐type MoS 2 anodes for potassium‐ion batteries typically suffer from sluggish kinetics and insufficient reversible conversion, which leads to rapid capacity decay. Herein, we report a hierarchical, carbon‐confined MoS 2 architecture featuring bridging‐type Ni single‐atoms (Ni‐ONC/MoS 2 @NC). These Ni single atoms bridge the MoS 2 and the intercalated carbon through S‐Ni‐O coordination, establishing efficient interfacial electronic transfer channels, thereby enabling fast bidirectional reaction kinetics with a high reversible conversion ratio of 85.7%. Both i n situ and ex situ characterizations, alongside theoretical calculations reveal that the S‐Ni‐O catalytic sites lower the K + diffusion barrier in MoS 2 . The hybridization between Ni‐3d and S‐3p orbitals effectively promotes K 2 S adsorption, weakens the K‐S bonds, and catalyzes K 2 S decomposition. Notably, the S‐Ni‐O sites undergo coordination reconstruction from S 3 ‐Ni‐O 1 to S 1 ‐Ni‐O 3 during cycling, which stabilizes the MoS 2 /carbon interface and prevents the deactivation of catalytic sites, thereby enabling fast and highly reversible conversion reactions. Consequently, the Ni‐ONC/MoS 2 @NC electrode delivers exceptional rate performance (255 mAh g −1 at 10 A g −1 ) and long‐term cycling stability (260 mAh g −1 after 1200 cycles at 1 A g −1 ). This study highlights the critical role of single‐atom bridging catalytic interfaces in regulating conversion‐type K + storage and offers a new pathway for designing highly stable and reversible anodes.
- Open Access
- 12 July 2026
- Published by Wiley in Responsive Materials
- Vol. 4 (3) , e70069
Nanocellulose‐based hydrogel membranes for underwater osmotic actuators
Nanocelluloses, as one of the most abundant natural biomass materials on the planet, are conventionally extracted from natural lignocellulosic fibers and present superior combined properties such as high hydrophilicity, low density, high mechanical strength, etc., which show attractive potential as the building blocks to construct different nanocellulose‐based hydrogel membranes for different and even for underwater actuator applications. Notably, the reported nanocellulose‐based hydrogel membranes for underwater actuators driven by osmotic pressure to date exhibit superior uniaxial actuation behaviors. We herein comprehensively summarize the present progress of nanocellulose‐based hydrogel membranes for underwater osmotic actuators, from the building blocks of nanocelluloses to the underwater osmotic actuation (OA) mechanism, including OA, electrochemical OA (ECOA), and corresponding underwater OA applications. Finally, we outline current challenges faced by nanocellulose‐based hydrogel membranes for advanced underwater osmotic actuators, such as ion/water transport kinetics in hydrogel membranes, controllability, and output power density. We also propose corresponding promising strategies for addressing these challenges, including the engineering of the nano‐building blocks, assembly techniques for nanocellulose‐based hydrogel membrane microstructures, programmable actuator configurations, and the integration into remote intelligent actuation systems, aiming to facilitate the high‐quality development of the next generation nanocellulose‐based underwater osmotic actuators.
- 12 July 2026
- Published by Wiley in Responsive Materials
- Vol. 4 (3) , e70069
Open AccessNanocellulose‐based hydrogel membranes for underwater osmotic actuators
Nanocelluloses, as one of the most abundant natural biomass materials on the planet, are conventionally extracted from natural lignocellulosic fibers and present superior combined properties such as high hydrophilicity, low density, high mechanical strength, etc., which show attractive potential as the building blocks to construct different nanocellulose‐based hydrogel membranes for different and even for underwater actuator applications. Notably, the reported nanocellulose‐based hydrogel membranes for underwater actuators driven by osmotic pressure to date exhibit superior uniaxial actuation behaviors. We herein comprehensively summarize the present progress of nanocellulose‐based hydrogel membranes for underwater osmotic actuators, from the building blocks of nanocelluloses to the underwater osmotic actuation (OA) mechanism, including OA, electrochemical OA (ECOA), and corresponding underwater OA applications. Finally, we outline current challenges faced by nanocellulose‐based hydrogel membranes for advanced underwater osmotic actuators, such as ion/water transport kinetics in hydrogel membranes, controllability, and output power density. We also propose corresponding promising strategies for addressing these challenges, including the engineering of the nano‐building blocks, assembly techniques for nanocellulose‐based hydrogel membrane microstructures, programmable actuator configurations, and the integration into remote intelligent actuation systems, aiming to facilitate the high‐quality development of the next generation nanocellulose‐based underwater osmotic actuators.
Coupling Electronic and Interfacial Engineering Unlocks Fast and Durable Iron Fluoride Cathodes
Iron fluoride is a promising conversion‐type cathode for lithium‐ion batteries owing to its high theoretical energy density, yet its practical application is hindered by poor electronic conductivity and limited cycling stability. Here, we report a synergistic strategy that integrates cobalt doping with binder engineering to simultaneously enhance the electronic structure and Li + transport kinetics of FeF 3 cathodes. Cobalt incorporation modulates the Fe─F coordination environment, introduces defect sites, and redistributes charge density, thereby promoting electron transport and Li + diffusion. In parallel, a sodium alginate‐based graphene oxide (SAGO) binder with high ionic conductivity reduces interfacial resistance and facilitates ion transport. As a result of this dual modulation, the SAGO‐Co‐FeF 3 cathode delivers a reversible capacity of 356 mAh g −1 after 50 cycles at 0.2 C and maintains 132 mAh g −1 at 10 C. Comprehensive electrochemical measurements, kinetic analyses, in/ex situ characterizations, and density functional theory calculations elucidate the underlying enhancements in electronic and ionic transport. Notably, a full cell employing the SAGO‐Co‐FeF 3 cathode retains 86.5% of its initial capacity after 500 cycles. This work provides a generalizable strategy for designing high‐energy, long‐life conversion‐type cathodes for practical lithium‐ion batteries through coupled electronic and interfacial engineering.
Coupling Electronic and Interfacial Engineering Unlocks Fast and Durable Iron Fluoride Cathodes
Iron fluoride is a promising conversion‐type cathode for lithium‐ion batteries owing to its high theoretical energy density, yet its practical application is hindered by poor electronic conductivity and limited cycling stability. Here, we report a synergistic strategy that integrates cobalt doping with binder engineering to simultaneously enhance the electronic structure and Li + transport kinetics of FeF 3 cathodes. Cobalt incorporation modulates the Fe─F coordination environment, introduces defect sites, and redistributes charge density, thereby promoting electron transport and Li + diffusion. In parallel, a sodium alginate‐based graphene oxide (SAGO) binder with high ionic conductivity reduces interfacial resistance and facilitates ion transport. As a result of this dual modulation, the SAGO‐Co‐FeF 3 cathode delivers a reversible capacity of 356 mAh g −1 after 50 cycles at 0.2 C and maintains 132 mAh g −1 at 10 C. Comprehensive electrochemical measurements, kinetic analyses, in/ex situ characterizations, and density functional theory calculations elucidate the underlying enhancements in electronic and ionic transport. Notably, a full cell employing the SAGO‐Co‐FeF 3 cathode retains 86.5% of its initial capacity after 500 cycles. This work provides a generalizable strategy for designing high‐energy, long‐life conversion‐type cathodes for practical lithium‐ion batteries through coupled electronic and interfacial engineering.
- 15 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (28)
In Situ Tracking of Programmable Reconstruction in Metal‐Organic Frameworks Toward Ampere‐Level Urea Oxidation
Understanding the dynamic evolution of catalyst coordination structures during electrochemical nucleophilic oxidation reactions (NORs) is essential for deliberately controlling phase reconstruction to define active motifs, yet remains elusive to date. Herein, a lattice‐strained NiMn‐based metal‐organic framework (L/NiMn‐MOF) engineered with abundant unsaturated coordination motifs was used as a model system to systematically investigate the dynamic phase transformation pathway during urea oxidation reaction (UOR). By integrating a multimodal in situ and operando diagnostic platform, we reveal a programmable phase evolution from the pristine MOF to metal hydroxides and subsequently to active oxyhydroxide phases, ultimately driving chemical hydrogen transfer via a three‐step chemical‐electrochemical‐chemical (C‐E‐C) oxidation mechanism toward UOR. Enabled by a programmable in situ reconstruction pathway that yields well‐defined active phases, the L/NiMn‐MOF‐derived NiMnOOH achieves 1.5 A cm −2 at 2.1 V in a urea‐assisted membrane‐electrode assembly‐based device (MEA) and maintains robust stability across a broad operational window of 200–1000 mA cm −2 . This work outlines a general in situ framework for clarifying reconstruction‐activity relationships toward an efficient urea‐assisted MEA device, with potential extension to related NOR catalysis.
- 15 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (28)
In Situ Tracking of Programmable Reconstruction in Metal‐Organic Frameworks Toward Ampere‐Level Urea Oxidation
Understanding the dynamic evolution of catalyst coordination structures during electrochemical nucleophilic oxidation reactions (NORs) is essential for deliberately controlling phase reconstruction to define active motifs, yet remains elusive to date. Herein, a lattice‐strained NiMn‐based metal‐organic framework (L/NiMn‐MOF) engineered with abundant unsaturated coordination motifs was used as a model system to systematically investigate the dynamic phase transformation pathway during urea oxidation reaction (UOR). By integrating a multimodal in situ and operando diagnostic platform, we reveal a programmable phase evolution from the pristine MOF to metal hydroxides and subsequently to active oxyhydroxide phases, ultimately driving chemical hydrogen transfer via a three‐step chemical‐electrochemical‐chemical (C‐E‐C) oxidation mechanism toward UOR. Enabled by a programmable in situ reconstruction pathway that yields well‐defined active phases, the L/NiMn‐MOF‐derived NiMnOOH achieves 1.5 A cm −2 at 2.1 V in a urea‐assisted membrane‐electrode assembly‐based device (MEA) and maintains robust stability across a broad operational window of 200–1000 mA cm −2 . This work outlines a general in situ framework for clarifying reconstruction‐activity relationships toward an efficient urea‐assisted MEA device, with potential extension to related NOR catalysis.