Yohan Dall’aGnese
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Yohan Dall’aGnese has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Yu Gao
Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, P. R. China
9 shared publications Gang Chen
Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, PR China
8 shared publications- Yury Gogotsi
A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia, USA
5 shared publications Huajun Xu
Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, PR China
4 shared publicationsXin Zhao
Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education) College of Physics Jilin University Changchun 130012 P. R. China
4 shared publications- Chunxiang Dall’aGnese
Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, China
3 shared publications
Latest Publications
- 13 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (46) , 53549-53557
High-Temperature Oxidized Mo2CTx MXene for a High-Performance Supercapacitor
Molybdenum carbide (Mo2CTx MXene) did not possess suitable properties for supercapacitors. Herein, a short oxidation method of Mo2CTx in air at moderately high temperatures is proposed for fabricating a Mo2C/MoO3 heterostructure. The stability of Mo2CTx in air up to 700 °C and the phase transition at higher temperatures are confirmed. Such a heterostructure is beneficial in reducing the diffusion energy barrier of H+. In the aqueous system, the Mo2C/MoO3 electrode delivers a capacitance of up to 811 F g-1. A fully assembled symmetric solid-state supercapacitor delivers 224 F g-1 with an excellent retention rate of 91.05% after 7500 cycles. Besides, the supercapacitor can work at the low temperature of -60°, showing good low-temperature properties. The approach presented in this work opens a promising way to turn a neglected MXene, assumed to be unsuitable for supercapacitors, into one of the top-performing supercapacitor electrodes.
- 13 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (46) , 53549-53557
High-Temperature Oxidized Mo2CTx MXene for a High-Performance Supercapacitor
Molybdenum carbide (Mo2CTx MXene) did not possess suitable properties for supercapacitors. Herein, a short oxidation method of Mo2CTx in air at moderately high temperatures is proposed for fabricating a Mo2C/MoO3 heterostructure. The stability of Mo2CTx in air up to 700 °C and the phase transition at higher temperatures are confirmed. Such a heterostructure is beneficial in reducing the diffusion energy barrier of H+. In the aqueous system, the Mo2C/MoO3 electrode delivers a capacitance of up to 811 F g-1. A fully assembled symmetric solid-state supercapacitor delivers 224 F g-1 with an excellent retention rate of 91.05% after 7500 cycles. Besides, the supercapacitor can work at the low temperature of -60°, showing good low-temperature properties. The approach presented in this work opens a promising way to turn a neglected MXene, assumed to be unsuitable for supercapacitors, into one of the top-performing supercapacitor electrodes.
- 25 December 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 23 (1) , 283-290
Metal Ion-Induced Porous MXene for All-Solid-State Flexible Supercapacitors
MXenes are normally used for energy storage applications. However, large nanosheets and restacking are detrimental to the ion diffusion and thus limit its rate capability. Here, a strategy to prepare flexible and porous MXene-M supercapacitor electrodes can simultaneously enlarge the interlayer spacing between layers and create holes in the layers. As a result, Ti3C2Tx-Mn presents an excellent lifespan, with still 248 F g-1 after 100 000 cycles at a current density of 100 A g-1. Moreover, Ti3C2Tx-Mn-based symmetric all-solid-state supercapacitor exhibits outstanding volumetric energy up to 52.4 mWh cm-3 and retains 38.4 mWh cm-3 at an ultrahigh volumetric power density of 55.3 W cm-3. We believe this work provides an idea for the later regulation of MXene layer spacing and the design of porous structures, and can be widely used in the next-generation high-energy density and power density practical applications.
- 25 December 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 23 (1) , 283-290
Metal Ion-Induced Porous MXene for All-Solid-State Flexible Supercapacitors
MXenes are normally used for energy storage applications. However, large nanosheets and restacking are detrimental to the ion diffusion and thus limit its rate capability. Here, a strategy to prepare flexible and porous MXene-M supercapacitor electrodes can simultaneously enlarge the interlayer spacing between layers and create holes in the layers. As a result, Ti3C2Tx-Mn presents an excellent lifespan, with still 248 F g-1 after 100 000 cycles at a current density of 100 A g-1. Moreover, Ti3C2Tx-Mn-based symmetric all-solid-state supercapacitor exhibits outstanding volumetric energy up to 52.4 mWh cm-3 and retains 38.4 mWh cm-3 at an ultrahigh volumetric power density of 55.3 W cm-3. We believe this work provides an idea for the later regulation of MXene layer spacing and the design of porous structures, and can be widely used in the next-generation high-energy density and power density practical applications.
- Open Access
- 15 June 2022
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 10, 955942
Editorial: Advances in Inorganic Materials for Supercapacitors and Batteries
Editorial: Advances in Inorganic Materials for Supercapacitors and Batteries
- 15 June 2022
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 10, 955942
Open AccessEditorial: Advances in Inorganic Materials for Supercapacitors and Batteries
Editorial: Advances in Inorganic Materials for Supercapacitors and Batteries
- 18 February 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (20) , 204002
Electrospun Ti3C2T x MXene and silicon embedded in carbon nanofibers for lithium-ion batteries
In spite of outstanding theoretical specific capacity (∼3590 mAh g−1), huge volume change during lithiation/delithiation and poor conductivity hinder the practical applications of pure Si anodes for lithium ion batteries (LIBs), requiring conductive additives and porous architectures. In this work, flexible and freestanding composite films made of two-dimensional Ti3C2T x MXene nanosheets and silicon particles embedded in carbon nanofiber (denoted as Ti3C2T x -Si@CNF) were prepared via electrospinning and used as LIB anodes. This new electrode design provides a 3D network architecture and high conductivity favorable for good electrochemical performance and long cycle life. Ti3C2T x -Si@CNF electrodes, containing 28% silicon retained high specific capacity of ∼1580 mAh g−1 after 100 cycles at 0.1 A g−1 and 720 mAh g−1 after 1000 cycles at 1 A g−1, and delivered a great rate performance with 289 mAh g−1 at a current density of 5 A g−1. This is a significantly enhanced performance compared with Si particles embedded in CNF without Ti3C2T x (denoted Si@CNF). This work proposes a scalable manufacturing strategy for developing high-performance silicon-based anodes, overcoming the low conductivity and volume expansion issues.
- 18 February 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (20) , 204002
Electrospun Ti3C2T x MXene and silicon embedded in carbon nanofibers for lithium-ion batteries
In spite of outstanding theoretical specific capacity (∼3590 mAh g−1), huge volume change during lithiation/delithiation and poor conductivity hinder the practical applications of pure Si anodes for lithium ion batteries (LIBs), requiring conductive additives and porous architectures. In this work, flexible and freestanding composite films made of two-dimensional Ti3C2T x MXene nanosheets and silicon particles embedded in carbon nanofiber (denoted as Ti3C2T x -Si@CNF) were prepared via electrospinning and used as LIB anodes. This new electrode design provides a 3D network architecture and high conductivity favorable for good electrochemical performance and long cycle life. Ti3C2T x -Si@CNF electrodes, containing 28% silicon retained high specific capacity of ∼1580 mAh g−1 after 100 cycles at 0.1 A g−1 and 720 mAh g−1 after 1000 cycles at 1 A g−1, and delivered a great rate performance with 289 mAh g−1 at a current density of 5 A g−1. This is a significantly enhanced performance compared with Si particles embedded in CNF without Ti3C2T x (denoted Si@CNF). This work proposes a scalable manufacturing strategy for developing high-performance silicon-based anodes, overcoming the low conductivity and volume expansion issues.
- 1 January 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (6) , 3824-3833
Chlorophyll derivatives/MXene hybrids for photocatalytic hydrogen evolution: Dependence of performance on the central coordinating metals
- 1 January 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (6) , 3824-3833
Chlorophyll derivatives/MXene hybrids for photocatalytic hydrogen evolution: Dependence of performance on the central coordinating metals
- 26 September 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (40) , 13672-13680
Hybridization of SnO2 and an In-Situ-Oxidized Ti3C2Tx MXene Electron Transport Bilayer for High-Performance Planar Perovskite Solar Cells
- 26 September 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (40) , 13672-13680
Hybridization of SnO2 and an In-Situ-Oxidized Ti3C2Tx MXene Electron Transport Bilayer for High-Performance Planar Perovskite Solar Cells
- Open Access
- 10 May 2021
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 12 (1) , 424-431
Solution combustion synthesis of a nanometer-scale Co3O4 anode material for Li-ion batteries
A novel solution combustion synthesis of nanoscale spinel-structured Co3O4 powder was proposed in this work. The obtained material was composed of loosely arranged nanoparticles whose average diameter was about 36 nm. The as-prepared cobalt oxide powder was also tested as the anode material for Li-ion batteries and revealed specific capacities of 1060 and 533 mAh·g−1 after 100 cycles at charge–discharge current densities of 100 and 500 mA·g−1, respectively. Moreover, electrochemical measurements indicate that even though the synthesized nanomaterial possesses a low active surface area, it exhibits a relatively high specific capacity measured at 100 mA·g−1 after 100 cycles and a quite good rate capability at current densities between 50 and 5000 mA·g−1.
- 10 May 2021
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 12 (1) , 424-431
Open AccessSolution combustion synthesis of a nanometer-scale Co3O4 anode material for Li-ion batteries
A novel solution combustion synthesis of nanoscale spinel-structured Co3O4 powder was proposed in this work. The obtained material was composed of loosely arranged nanoparticles whose average diameter was about 36 nm. The as-prepared cobalt oxide powder was also tested as the anode material for Li-ion batteries and revealed specific capacities of 1060 and 533 mAh·g−1 after 100 cycles at charge–discharge current densities of 100 and 500 mA·g−1, respectively. Moreover, electrochemical measurements indicate that even though the synthesized nanomaterial possesses a low active surface area, it exhibits a relatively high specific capacity measured at 100 mA·g−1 after 100 cycles and a quite good rate capability at current densities between 50 and 5000 mA·g−1.
- Open Access
- 22 April 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (47)
Flexible Nb4C3Tx Film with Large Interlayer Spacing for High‐Performance Supercapacitors
MXenes derived from 413 MAX phases are rarely studied but they have the potential to have superior electrical and mechanical properties thanks to a thicker monolayer (four layers of transition metal and three layers of carbon or nitrogen). In this paper, Nb4C3Tx MXene nanosheets are delaminated and freestanding film with 1.77 nm interlayer spacing is obtained, which is larger than that of most previous MXenes. When Nb4C3Tx freestanding films are tested as supercapacitors electrodes, Nb4C3Tx shows high volumetric capacitance, 1075, 687, and 506 F cm−3 in 1 m H2SO4, 1 m KOH, and 1 m MgSO4, respectively, at the scan rate of 5 mV s−1. An in situ X‐ray diffraction technique is used to study the structural changes during the electrochemical charging in 1 m H2SO4 and 1 m MgSO4. There is almost no change in the 21 Å interlayer spacing during the cycling, because the space between the MXene layers is sufficient to accommodate the insertion and deinsertion of cations. This can lead to stable performance of Nb4C3Tx MXene energy storage devices.
- 22 April 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (47)
Open AccessFlexible Nb4C3Tx Film with Large Interlayer Spacing for High‐Performance Supercapacitors
MXenes derived from 413 MAX phases are rarely studied but they have the potential to have superior electrical and mechanical properties thanks to a thicker monolayer (four layers of transition metal and three layers of carbon or nitrogen). In this paper, Nb4C3Tx MXene nanosheets are delaminated and freestanding film with 1.77 nm interlayer spacing is obtained, which is larger than that of most previous MXenes. When Nb4C3Tx freestanding films are tested as supercapacitors electrodes, Nb4C3Tx shows high volumetric capacitance, 1075, 687, and 506 F cm−3 in 1 m H2SO4, 1 m KOH, and 1 m MgSO4, respectively, at the scan rate of 5 mV s−1. An in situ X‐ray diffraction technique is used to study the structural changes during the electrochemical charging in 1 m H2SO4 and 1 m MgSO4. There is almost no change in the 21 Å interlayer spacing during the cycling, because the space between the MXene layers is sufficient to accommodate the insertion and deinsertion of cations. This can lead to stable performance of Nb4C3Tx MXene energy storage devices.
- 19 September 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 19 (10) , 7443-7448
Electrochemical Actuators Based on Two-Dimensional Ti3C2Tx (MXene)
Electrochemical actuators are devices that convert electrical energy into mechanical energy via electrochemical processes. They are used in soft robotics, artificial muscles, micro-pumps, sensors and other fields. The design of flexible and stable electrode materials remains a major challenge. MXenes, an emerging family of 2D materials, have found applications in energy storage. Here, we report an actuator device using MXene (Ti3C2Tx) as a flexible electrode material. The electrode in 1 M H2SO4 electrolyte exhibits a curvature’s change up to 0.083 mm-1 and strain of 0.29%. Meanwhile, the MXene-based actuator with a symmetric configuration separated by gel electrolyte (PVA-H2SO4) has curvature and strain changes up to 0.038 mm-1 and 0.26% with excellent retention after 10,000 cycles. In-situ X-ray diffraction analysis demonstrates that the actuation mechanism is due to the expansion and shrinkage of the interlayer spacing of MXenes. This research shows promise of this new family of materials for electrochemical actuators.
- 19 September 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 19 (10) , 7443-7448
Electrochemical Actuators Based on Two-Dimensional Ti3C2Tx (MXene)
Electrochemical actuators are devices that convert electrical energy into mechanical energy via electrochemical processes. They are used in soft robotics, artificial muscles, micro-pumps, sensors and other fields. The design of flexible and stable electrode materials remains a major challenge. MXenes, an emerging family of 2D materials, have found applications in energy storage. Here, we report an actuator device using MXene (Ti3C2Tx) as a flexible electrode material. The electrode in 1 M H2SO4 electrolyte exhibits a curvature’s change up to 0.083 mm-1 and strain of 0.29%. Meanwhile, the MXene-based actuator with a symmetric configuration separated by gel electrolyte (PVA-H2SO4) has curvature and strain changes up to 0.038 mm-1 and 0.26% with excellent retention after 10,000 cycles. In-situ X-ray diffraction analysis demonstrates that the actuation mechanism is due to the expansion and shrinkage of the interlayer spacing of MXenes. This research shows promise of this new family of materials for electrochemical actuators.
- 11 September 2019
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 4 (10) , 2452-2457
Electrochemical Interaction of Sn-Containing MAX Phase (Nb2SnC) with Li-Ions
- 11 September 2019
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 4 (10) , 2452-2457
Electrochemical Interaction of Sn-Containing MAX Phase (Nb2SnC) with Li-Ions