Jifu Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jifu Wang has a total of 158 co-authors. Here are the top co-authors by number of shared publications:
Chunpeng Wang
Institute of Chemical Industry of Forest Products, CAF, National Engineering Laboratory of Biomass Chemical Utilization, Key and Laboratory of Forest Chemical Engineering, SFA, Key Laboratory of Biomass Energy and Material, Nanjing, Jiangsu Province 210042, China; Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China
40 shared publications- Fuxiang Chu
Chinese Academy of Forestry
40 shared publications Chuanwei Lu
Nanjing Forestry Univ, Coinnovat Ctr Efficient Proc & Utilizat Forest Res, Nanjing 210037, Peoples R China
23 shared publicationsJuan Yu
Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China
19 shared publicationsFuxiang Chu
Institute of Chemical Industry of Forest Products, CAF, National Engineering Laboratory of Biomass Chemical Utilization, Key and Laboratory of Forest Chemical Engineering, SFA, Key Laboratory of Biomass Energy and Material, Nanjing, Jiangsu Province 210042, China; Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China
13 shared publications- Xiaohuan Liu
School of Engineering, Zhejiang A & F University, 666 Wusu Street, Hangzhou 311300, PR China
8 shared publications
Latest Publications
- 20 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (30) , 13788-13801
Mechanically Robust, Self-Healing Adaptive Ionic Conductors Enabled by Cellulose-Mediated Dynamic Covalent–Noncovalent Networks for Environmentally Adaptable Electronics
Ionic conductors have garnered significant attention in wearable sensors owing to their excellent weather resistance. However, their unsatisfactory mechanical properties and lack of self-healing capabilities hinder their practical application. Herein, an adaptive ionic conductor (AIC) with excellent mechanical properties, self-healing ability, and anti-freezing performance was developed by constructing dynamic covalent–noncovalent adaptive networks. In this AIC, amino cellulose (AC) is employed as a macromolecular crosslinker and in situ crosslinked with the aldehyde groups of vanillin monomer in a choline chloride/acrylic acid/vanillin monomer-derived polymerizable deep eutectic solvent to construct the dynamic covalent–noncovalent adaptive network through Schiff base chemistry and multiple hydrogen-bonding interactions. The synergistic effects of cellulose reinforcement and the formation of covalent–noncovalent adaptive networks endow the AIC with high mechanical strength (1.11 MPa), remarkable toughness (3.31 MJ/m3), and excellent anti-freezing capability. Meanwhile, the dynamic reversibility of the adaptive network imparts the AIC with outstanding self-healing performance, achieving a stress self-healing efficiency exceeding 90%. Notably, the AIC was successfully applied in environmentally adaptable multifunctional sensors and triboelectric nanogenerators for monitoring human motion and harvesting mechanical energy under extreme conditions. This work provides a promising strategy for the development of multifunctional adaptive ionic conductors for durable wearable sensors in harsh environments.
- 20 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (30) , 13788-13801
Mechanically Robust, Self-Healing Adaptive Ionic Conductors Enabled by Cellulose-Mediated Dynamic Covalent–Noncovalent Networks for Environmentally Adaptable Electronics
Ionic conductors have garnered significant attention in wearable sensors owing to their excellent weather resistance. However, their unsatisfactory mechanical properties and lack of self-healing capabilities hinder their practical application. Herein, an adaptive ionic conductor (AIC) with excellent mechanical properties, self-healing ability, and anti-freezing performance was developed by constructing dynamic covalent–noncovalent adaptive networks. In this AIC, amino cellulose (AC) is employed as a macromolecular crosslinker and in situ crosslinked with the aldehyde groups of vanillin monomer in a choline chloride/acrylic acid/vanillin monomer-derived polymerizable deep eutectic solvent to construct the dynamic covalent–noncovalent adaptive network through Schiff base chemistry and multiple hydrogen-bonding interactions. The synergistic effects of cellulose reinforcement and the formation of covalent–noncovalent adaptive networks endow the AIC with high mechanical strength (1.11 MPa), remarkable toughness (3.31 MJ/m3), and excellent anti-freezing capability. Meanwhile, the dynamic reversibility of the adaptive network imparts the AIC with outstanding self-healing performance, achieving a stress self-healing efficiency exceeding 90%. Notably, the AIC was successfully applied in environmentally adaptable multifunctional sensors and triboelectric nanogenerators for monitoring human motion and harvesting mechanical energy under extreme conditions. This work provides a promising strategy for the development of multifunctional adaptive ionic conductors for durable wearable sensors in harsh environments.
- 26 December 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (1) , 1652-1664
A Nature-Inspired Steroid-like Electron Acceptor to Polarity-Dependent Probe for Visualizing Lipid Evolution in Alzheimer’s Disease
Current petrochemical-based electron acceptors in advanced optical materials face problems such as structural diversity, renewability, and biocompatibility. Natural product-derived fluorescent materials with donor-acceptor structures, stimuli-responsive photophysical properties, and superior biocompatibility are crucial for biomedical applications like visualizing the lipid evolution in Alzheimer's disease (AD). In this work, a nature-inspired electron acceptor (DABT) analogous to steroids has been constructed based on the tricyclic diterpene skeleton of natural rosin. Through substitution with variable electron donors, the dimethyl amino-substituted compound, DABT-DMA, can be applied as a polarity-dependent biosensor with dual-stimuli responsiveness of distinct fluorescence wavelength and lifetime. The natural skeleton's advantageous biocompatibility and targeting capability enable lipid droplet-targeted imaging. Further investigations prove that the single biobased sensor can combine the bilateral advantages of two commercial probes, confirming that Aβ protein-induced lipid droplet dysfunction causes cholesterol analogue accumulation, worsening AD pathology. This work not only proposes a steroid-like natural electron acceptor with both biocompatibility and targeting capability but also offers insights into AD-related pathophysiological mechanisms.
- 26 December 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (1) , 1652-1664
A Nature-Inspired Steroid-like Electron Acceptor to Polarity-Dependent Probe for Visualizing Lipid Evolution in Alzheimer’s Disease
Current petrochemical-based electron acceptors in advanced optical materials face problems such as structural diversity, renewability, and biocompatibility. Natural product-derived fluorescent materials with donor-acceptor structures, stimuli-responsive photophysical properties, and superior biocompatibility are crucial for biomedical applications like visualizing the lipid evolution in Alzheimer's disease (AD). In this work, a nature-inspired electron acceptor (DABT) analogous to steroids has been constructed based on the tricyclic diterpene skeleton of natural rosin. Through substitution with variable electron donors, the dimethyl amino-substituted compound, DABT-DMA, can be applied as a polarity-dependent biosensor with dual-stimuli responsiveness of distinct fluorescence wavelength and lifetime. The natural skeleton's advantageous biocompatibility and targeting capability enable lipid droplet-targeted imaging. Further investigations prove that the single biobased sensor can combine the bilateral advantages of two commercial probes, confirming that Aβ protein-induced lipid droplet dysfunction causes cholesterol analogue accumulation, worsening AD pathology. This work not only proposes a steroid-like natural electron acceptor with both biocompatibility and targeting capability but also offers insights into AD-related pathophysiological mechanisms.
- 17 November 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 705, 139459
Hydrophobic ionogel with Mitigated sea–island structure: Exhibiting ultrahigh adhesion via cellulose-mediated energy dissipation
- 17 November 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 705, 139459
Hydrophobic ionogel with Mitigated sea–island structure: Exhibiting ultrahigh adhesion via cellulose-mediated energy dissipation
- Open Access
- 10 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
A nature-inspired steroid-like electron acceptor to polarity-dependent probe for visualizing lipid evolution in Alzheimer’s disease
To date, most optical materials are derived from petrochemicals, facing problems like renewability, sustainability, and biocompatibility. Fluorescent materials derived from natural products with unique structures, stimuli-responsive photophysical properties, and superior compatibility are of extraordinary significance for biomedical applications. In this work, a nature-inspired electron acceptor with a steroid-like structure (DABT) has been constructed based on the tricyclic diterpene skeleton of natural rosin. Through substitution with variable electron donors, red-shifted and twisted intramolecular charge transfer can be realized. In particular, the dimethyl amino substituted compound, DABT-DMA, can be applied as a polarity-dependent bio-sensor with a dual responsiveness of distinct fluorescence wavelength and lifetime due to its outstanding solvent effect. In addition to the advantageous biocompatibility and steroid-like structure of DABT-DMA, successful lipid droplet-targeted imaging at dual channels can be achieved. Further investigations prove that dysfunction of lipid droplets induced by Aβ protein can result in the accumulation of cholesterol analogs, further exacerbating the pathological features of Alzheimer’s disease. This work not only proposes a novel natural electron acceptor with a steroid-like structure possessing both biocompatibility and targeting capability but also offers new insights into Alzheimer’s disease-related pathophysiological mechanisms, paving the way toward potential diagnostics.
- 10 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessA nature-inspired steroid-like electron acceptor to polarity-dependent probe for visualizing lipid evolution in Alzheimer’s disease
To date, most optical materials are derived from petrochemicals, facing problems like renewability, sustainability, and biocompatibility. Fluorescent materials derived from natural products with unique structures, stimuli-responsive photophysical properties, and superior compatibility are of extraordinary significance for biomedical applications. In this work, a nature-inspired electron acceptor with a steroid-like structure (DABT) has been constructed based on the tricyclic diterpene skeleton of natural rosin. Through substitution with variable electron donors, red-shifted and twisted intramolecular charge transfer can be realized. In particular, the dimethyl amino substituted compound, DABT-DMA, can be applied as a polarity-dependent bio-sensor with a dual responsiveness of distinct fluorescence wavelength and lifetime due to its outstanding solvent effect. In addition to the advantageous biocompatibility and steroid-like structure of DABT-DMA, successful lipid droplet-targeted imaging at dual channels can be achieved. Further investigations prove that dysfunction of lipid droplets induced by Aβ protein can result in the accumulation of cholesterol analogs, further exacerbating the pathological features of Alzheimer’s disease. This work not only proposes a novel natural electron acceptor with a steroid-like structure possessing both biocompatibility and targeting capability but also offers new insights into Alzheimer’s disease-related pathophysiological mechanisms, paving the way toward potential diagnostics.
- Open Access
- 3 December 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (5) , 1300-1330
Pickering multiphase materials using plant-based colloidal lignin nanoparticles
A Pickering emulsion, stabilized by amphiphilic solid particles, is a highly functional and stable system that has attracted significant research interest.
- 3 December 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (5) , 1300-1330
Open AccessPickering multiphase materials using plant-based colloidal lignin nanoparticles
A Pickering emulsion, stabilized by amphiphilic solid particles, is a highly functional and stable system that has attracted significant research interest.
- 31 October 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 280, 136439
Sustainable, temperature-tolerant, dual network conductive pressure sensitive adhesive from cellulose and rosin for wearable sensing
- 31 October 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 280, 136439
Sustainable, temperature-tolerant, dual network conductive pressure sensitive adhesive from cellulose and rosin for wearable sensing
- 30 September 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
Lignin‐Based Macromolecular Photoinitiator for Non‐Migration, Self‐Adhesive, and Water‐Resistant Eutectogels toward Underwater Reliable Communication
Hydrophobic conductive gels have attracted much attention in underwater sensing as the soft robots and wearable sensors. Among the various methods for preparing conductive gels, UV‐initiated polymerization shows advantages of rapid curing and significant energy savings. However, traditional commonly used photoinitiators in UV‐initiated polymerization often migrate or diffuse within conductive gels, especially with prolonged use or underwater, posing potential environmental and health risks. Herein, a novel lignin‐based macromolecular photoinitiator (L‐BF) is first designed by incorporating benzoylformate into the lignin backbone, demonstrating excellent UV absorption, high radical initiation efficiency, and hydrophobicity. Subsequently, hydrophobic eutectogels (HEG) are prepared via UV‐initiated polymerization using L‐BF as photoinitiator. The HEG shows excellent mechanical properties (toughness of 5.67 MJ m−3 and strain of 941%) and scarcely L‐BF migration underwater. Moreover, the hydrophobic network of L‐BF endowed HEG with hydrophobicity (water contact angle exceeds 110°; swelling ratio is <5.8%), superior underwater adhesion (255 kPa), even maintained excellent sensing performance (gauge factor of 4.69), and long‐term reproducibility (20 000 cycles) in air and underwater. Validation confirms the potential of HEG as an effective wearable sensor for underwater posture monitoring and communication, advancing the use of lignin and low‐migration conductive gels in marine exploration.
- 30 September 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
Lignin‐Based Macromolecular Photoinitiator for Non‐Migration, Self‐Adhesive, and Water‐Resistant Eutectogels toward Underwater Reliable Communication
Hydrophobic conductive gels have attracted much attention in underwater sensing as the soft robots and wearable sensors. Among the various methods for preparing conductive gels, UV‐initiated polymerization shows advantages of rapid curing and significant energy savings. However, traditional commonly used photoinitiators in UV‐initiated polymerization often migrate or diffuse within conductive gels, especially with prolonged use or underwater, posing potential environmental and health risks. Herein, a novel lignin‐based macromolecular photoinitiator (L‐BF) is first designed by incorporating benzoylformate into the lignin backbone, demonstrating excellent UV absorption, high radical initiation efficiency, and hydrophobicity. Subsequently, hydrophobic eutectogels (HEG) are prepared via UV‐initiated polymerization using L‐BF as photoinitiator. The HEG shows excellent mechanical properties (toughness of 5.67 MJ m−3 and strain of 941%) and scarcely L‐BF migration underwater. Moreover, the hydrophobic network of L‐BF endowed HEG with hydrophobicity (water contact angle exceeds 110°; swelling ratio is <5.8%), superior underwater adhesion (255 kPa), even maintained excellent sensing performance (gauge factor of 4.69), and long‐term reproducibility (20 000 cycles) in air and underwater. Validation confirms the potential of HEG as an effective wearable sensor for underwater posture monitoring and communication, advancing the use of lignin and low‐migration conductive gels in marine exploration.
- 20 August 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 278 (Pt 3) , 134921
Fabrication of liquid-free ionic conductive elastomer (ICE) from cellulose-rosin derived poly(esterimide) towards temperature-tolerant and solvent-resistant UV shadowless adhesive and sensor
- 20 August 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 278 (Pt 3) , 134921
Fabrication of liquid-free ionic conductive elastomer (ICE) from cellulose-rosin derived poly(esterimide) towards temperature-tolerant and solvent-resistant UV shadowless adhesive and sensor
- 14 December 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (13)
Skin‐Like Transparent, High Resilience, Low Hysteresis, Fatigue‐Resistant Cellulose‐Based Eutectogel for Self‐Powered E‐Skin and Human–Machine Interaction
Artificial electronic skin (E‐skin), a class of promising materials mimicking the physical‐chemical and sensory performance of the human skin, has gained extensive interest in the field of human health‐monitoring and robotic skins. However, developing E‐skin simultaneously achieving high resilience, hysteresis‐free, and absent external power is always a formidable challenge. Herein, a liquid‐free eutectic gel‐based self‐powered E‐skin with high resilience, fatigue resistance, and conductivity is prepared by introducing hydroxypropyl cellulose (HPC) into metal salt‐based deep eutectic solvents (MDES). The unique structural design of cellulose‐anchored permanent entangled poly(acrylic acid) (PAA) chain, in combination with rapid broken/reconstruction of the dense dynamic sacrificial bonds, realizes the fabrication of high‐elastic E‐skin with negligible hysteresis. This further demonstrates the promising practical application of the cellulose‐based eutectogel with high transmittance (92%), high conductivity (36.6 mS m−1), and high resilience (98.1%), and excellent environment stability in robust triboelectric nanogenerator for energy harvesting and high resilience, self‐powered E‐skin for human health‐caring and human‐machine interaction.
- 14 December 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (13)
Skin‐Like Transparent, High Resilience, Low Hysteresis, Fatigue‐Resistant Cellulose‐Based Eutectogel for Self‐Powered E‐Skin and Human–Machine Interaction
Artificial electronic skin (E‐skin), a class of promising materials mimicking the physical‐chemical and sensory performance of the human skin, has gained extensive interest in the field of human health‐monitoring and robotic skins. However, developing E‐skin simultaneously achieving high resilience, hysteresis‐free, and absent external power is always a formidable challenge. Herein, a liquid‐free eutectic gel‐based self‐powered E‐skin with high resilience, fatigue resistance, and conductivity is prepared by introducing hydroxypropyl cellulose (HPC) into metal salt‐based deep eutectic solvents (MDES). The unique structural design of cellulose‐anchored permanent entangled poly(acrylic acid) (PAA) chain, in combination with rapid broken/reconstruction of the dense dynamic sacrificial bonds, realizes the fabrication of high‐elastic E‐skin with negligible hysteresis. This further demonstrates the promising practical application of the cellulose‐based eutectogel with high transmittance (92%), high conductivity (36.6 mS m−1), and high resilience (98.1%), and excellent environment stability in robust triboelectric nanogenerator for energy harvesting and high resilience, self‐powered E‐skin for human health‐caring and human‐machine interaction.