Andrej Skerencak-Frech
Research Subjects
Andrej Skerencak-Frech has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
Petra J. Panak
Heidelberg University, Institut für Physikalische Chemie, Im Neuenheimer Feld 253, 69120 Heidelberg, Germany
11 shared publicationsMichael Trumm
Karlsruher Institut für Technologie (KIT), Institut für Nukleare Entsorgung (INE), 76344 Eggenstein-Leopoldshafen, Germany
5 shared publicationsBernd Schimmelpfennig
Institute for Nuclear Waste Disposal (KIT-INE), Karlsruhe Institute of Technology, P.O. Box 3640, 76021 Karlsruhe, Germany
3 shared publicationsJörg Rothe
Institut für Nukleare Entsorgung (INE), Karlsruher Institut für Technologie (KIT), D-76344 Eggenstein-Leopoldshafen, Germany
3 shared publicationsKathy Dardenne
Karlsruher Institut für Technologie (KIT), Institut für Nukleare Entsorgung (INE), 76344 Eggenstein-Leopoldshafen, Germany
3 shared publicationsAndré Rossberg
Helmholtz-Zentrum Dresden-Rossendorf, Institut für Ressourcenökologie, Bautzner Landstraße 400, 01328 Dresden, Germany
2 shared publications
Latest Publications
- 29 October 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (44) , 22073-22081
Interaction of Trivalent An(III) with Glenium 51: The Effect of Ionic Strength
In this work, we present novel insights on the complexation of Cm(III) with the polycarboxylate ether-based concrete superplasticizer Glenium® 51 as a function of ionic strength (Im(NaCl) = 0.10-3.49 mol kg-1) and pHm. By using the metal ion charge neutralization model, conditional stability constants are derived from spectral analysis (time-resolved laser fluorescence spectroscopy, TRLFS). Increasing the pHm results in the formation of distinct Cm(III) complex species: CmGle, Cm(OH)Gle, and Cm(OH)2Gle. With increasing ionic strength, the CmGle and Cm(OH)Gle formation is less favored, resulting in a decrease of the complex stability by 1.2 and 0.5 orders of magnitude, respectively. In contrast, the formation of the third complex species Cm(OH)2Gle is favored, leading to an overall increase of the stability constant by 1.1 orders of magnitude. With the specific ion interaction theory (SIT), the conditional stability constants are extrapolated to zero ionic strength, yielding logβ10 (CmGle) = 7.46 ± 1.1, logβ20 (Cm(OH)Gle) = 14.2 ± 1.4 , and logβ30 (Cm(OH)2Gle) = 18.0 ± 1.8. These novel studies are essential for modeling actinide behavior with concrete additives in the near-field of a nuclear waste repository in the clay rock formations of Northern Germany, where increased ionic strengths are ubiquitous.
- 29 October 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (44) , 22073-22081
Interaction of Trivalent An(III) with Glenium 51: The Effect of Ionic Strength
In this work, we present novel insights on the complexation of Cm(III) with the polycarboxylate ether-based concrete superplasticizer Glenium® 51 as a function of ionic strength (Im(NaCl) = 0.10-3.49 mol kg-1) and pHm. By using the metal ion charge neutralization model, conditional stability constants are derived from spectral analysis (time-resolved laser fluorescence spectroscopy, TRLFS). Increasing the pHm results in the formation of distinct Cm(III) complex species: CmGle, Cm(OH)Gle, and Cm(OH)2Gle. With increasing ionic strength, the CmGle and Cm(OH)Gle formation is less favored, resulting in a decrease of the complex stability by 1.2 and 0.5 orders of magnitude, respectively. In contrast, the formation of the third complex species Cm(OH)2Gle is favored, leading to an overall increase of the stability constant by 1.1 orders of magnitude. With the specific ion interaction theory (SIT), the conditional stability constants are extrapolated to zero ionic strength, yielding logβ10 (CmGle) = 7.46 ± 1.1, logβ20 (Cm(OH)Gle) = 14.2 ± 1.4 , and logβ30 (Cm(OH)2Gle) = 18.0 ± 1.8. These novel studies are essential for modeling actinide behavior with concrete additives in the near-field of a nuclear waste repository in the clay rock formations of Northern Germany, where increased ionic strengths are ubiquitous.
- Open Access
- 31 August 2024
- Published by Elsevier in Chemosphere
- Vol. 364, 143233
Cm(III) speciation in the presence of citrate from neutral to hyperalkaline conditions and the effect of calcium
- 31 August 2024
- Published by Elsevier in Chemosphere
- Vol. 364, 143233
Open AccessCm(III) speciation in the presence of citrate from neutral to hyperalkaline conditions and the effect of calcium
- 25 November 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (24) , 18674-18686
Complexation of Np(V) with the Dicarboxylates, Malonate, and Succinate: Complex Stoichiometry, Thermodynamic Data, and Structural Information
The complexation of Np(V) with malonate and succinate is studied by different spectroscopic techniques, namely, attenuated total reflection Fourier transform infrared (ATR FT-IR) and extended X-ray absorption fine-structure (EXAFS) spectroscopy, as well as by quantum chemistry to determine the speciation, thermodynamic data, and structural information of the formed complexes. For complex stoichiometries and the thermodynamic functions (log βn°(Θ), ΔrHn°, ΔrSn°), near infrared absorption spectroscopy (vis/NIR) is applied. The complexation reactions are investigated as a function of the total concentration of malonate ([Mal2–]total) and succinate ([Succ2–]total), ionic strength [Im = 0.5–4.0 mol kg–1 Na+(Cl–/ClO4–)], and temperature (Θ = 20–85 °C). Besides the solvated NpO2+ ion, the formation of two Np(V) species with the stoichiometry NpO2(L)n1–2n (n = 1, 2, L = Mal2–, Succ2–) is observed. With increasing temperature, the molar fractions of both complex species increase and the temperature-dependent conditional stability constants log βn′(Θ) at given ionic strengths are determined by the law of mass action. The log βn′(Θ) are extrapolated to IUPAC reference-state conditions (Im = 0) according to the specific ion interaction theory (SIT), revealing thermodynamic log βn°(Θ) values. For all formed complexes, [NpO2(Mal)−: log β1°(25 °C) = 3.36 ± 0.11, NpO2(Mal)23–: log β2°(25 °C) = 3.95 ± 0.19, NpO2(Succ)−: log β1°(25 °C) = 2.05 ± 0.45, NpO2(Succ)23–: log β2°(25 °C) = 0.75 ± 1.22], an increase of the stability constants with increasing temperature was observed. This confirmed an endothermic complexation reaction. The temperature dependence of the log βn°(T) values is described by the integrated Van’t Hoff equation, and the standard reaction enthalpies and entropies for the complexation reactions are determined. Furthermore, the sum of the specific binary ion–ion interaction coefficients Δεn°(Θ) for the complexation reactions are obtained as a function of the t from the respective SIT modeling as a function of the temperature. In addition to the thermodynamic data, the structures of the complexes and the coordination modes of malonate and succinate are investigated using EXAFS spectroscopy, ATR-FT-IR spectroscopy, and quantum chemical calculations. The results show that in the case of malonate, six-membered chelate complexes are formed, whereas for succinate, seven-membered rings form. The latter ones are energetically unfavorable due to the limited space in the equatorial plane of the Np(V) ion (as NpO2+ cation).
- 25 November 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (24) , 18674-18686
Complexation of Np(V) with the Dicarboxylates, Malonate, and Succinate: Complex Stoichiometry, Thermodynamic Data, and Structural Information
The complexation of Np(V) with malonate and succinate is studied by different spectroscopic techniques, namely, attenuated total reflection Fourier transform infrared (ATR FT-IR) and extended X-ray absorption fine-structure (EXAFS) spectroscopy, as well as by quantum chemistry to determine the speciation, thermodynamic data, and structural information of the formed complexes. For complex stoichiometries and the thermodynamic functions (log βn°(Θ), ΔrHn°, ΔrSn°), near infrared absorption spectroscopy (vis/NIR) is applied. The complexation reactions are investigated as a function of the total concentration of malonate ([Mal2–]total) and succinate ([Succ2–]total), ionic strength [Im = 0.5–4.0 mol kg–1 Na+(Cl–/ClO4–)], and temperature (Θ = 20–85 °C). Besides the solvated NpO2+ ion, the formation of two Np(V) species with the stoichiometry NpO2(L)n1–2n (n = 1, 2, L = Mal2–, Succ2–) is observed. With increasing temperature, the molar fractions of both complex species increase and the temperature-dependent conditional stability constants log βn′(Θ) at given ionic strengths are determined by the law of mass action. The log βn′(Θ) are extrapolated to IUPAC reference-state conditions (Im = 0) according to the specific ion interaction theory (SIT), revealing thermodynamic log βn°(Θ) values. For all formed complexes, [NpO2(Mal)−: log β1°(25 °C) = 3.36 ± 0.11, NpO2(Mal)23–: log β2°(25 °C) = 3.95 ± 0.19, NpO2(Succ)−: log β1°(25 °C) = 2.05 ± 0.45, NpO2(Succ)23–: log β2°(25 °C) = 0.75 ± 1.22], an increase of the stability constants with increasing temperature was observed. This confirmed an endothermic complexation reaction. The temperature dependence of the log βn°(T) values is described by the integrated Van’t Hoff equation, and the standard reaction enthalpies and entropies for the complexation reactions are determined. Furthermore, the sum of the specific binary ion–ion interaction coefficients Δεn°(Θ) for the complexation reactions are obtained as a function of the t from the respective SIT modeling as a function of the temperature. In addition to the thermodynamic data, the structures of the complexes and the coordination modes of malonate and succinate are investigated using EXAFS spectroscopy, ATR-FT-IR spectroscopy, and quantum chemical calculations. The results show that in the case of malonate, six-membered chelate complexes are formed, whereas for succinate, seven-membered rings form. The latter ones are energetically unfavorable due to the limited space in the equatorial plane of the Np(V) ion (as NpO2+ cation).
- Open Access
- 10 November 2021
- Published by Copernicus GmbH in Safety of Nuclear Waste Disposal
- Vol. 1, 159-160
Impact of increased temperatures on the geochemical behaviour of trivalent actinides in aquatic systems
The Safety Case for a radioactive waste repository in deep geological formations requires detailed chemical and thermodynamic information on the stored radionuclides in their relevant oxidation states. Although a comprehensive summary of critically evaluated thermodynamic data is available via the blue book series of the NEA-TDB (“Nuclear Energy Agency – Thermochemical Database”), the majority of this data is limited to ambient conditions (Grenthe et al., 2020). In the case of the disposal of high-active, heat-producing waste, however, the near-field of the repository will experience increased temperatures at early operative phases for several hundred or a few thousand years. Radionuclides may come into contact with aquatic solutions or brines at elevated temperatures in the case of early canister failure. Besides other factors of the overall disposal concept (e.g. the geometry of the repository, type and amount of stored radionuclide inventories), host rock characteristics themselves limit the extent of the allowable temperature increase. For example, in clay formations the maximum temperature should stay at around or below in order to avoid an irreversible change in the host rock retention capacity, whereas rock salt allows much higher temperatures of up to 200 ∘C. Increased temperatures will have a distinct impact on the geochemical behaviour of radionuclides, potentially affecting their mobility and retention in the near field. Besides reactions at the solid–liquid interface (e.g. dissolution/precipitation reactions of the waste matrix, sorption reactions of the radionuclides to surfaces), complexation reactions with inorganic and organic ligands present in the aqueous phase potentially affect migration behaviour of the radionuclides. A quantitative thermodynamic description of these processes requires standard stability constants ( ), as well as standard reaction enthalpies and entropies ( , ). The precise experimental determination of these data for all relevant radionuclide/ligand reactions requires a vast amount of time and effort. In this regard, reliable extrapolation methods in particular for standard stability constants valid for 25 ∘C to higher temperatures are considered to support a comprehensive description. Recently, the German Federal Ministry of Education and Research (BMBF)-funded collaborative research project “Therm AC” focused on the experimental determination of new thermodynamic data at higher temperatures, as well as the comparison with the analogous results yielded by extrapolation methods. The Thermochemical Database Project of the OECD-NEA (NEA-TDB) is currently in the process of preparing a comprehensive state-of-the-art report on the high temperature thermodynamics of radionuclides, further emphasizing the particular relevance of this interesting topic. Within this contribution, a critical overview on the recent advances in the field of high temperature studies of radionuclides in aqueous solutions will be given. Besides summarizing information on key technical aspects relevant for high temperature studies, the effect of increased temperatures on the complexation of trivalent actinides with chloride will be discussed in more detail in order to illustrate newly derived in-depth understanding of the impact of increased temperatures on the (geo)chemical behaviour of trivalent actinides on the molecular scale (Skerencak-Frech et al., 2014).- 10 November 2021
- Published by Copernicus GmbH in Safety of Nuclear Waste Disposal
- Vol. 1, 159-160
Open AccessImpact of increased temperatures on the geochemical behaviour of trivalent actinides in aquatic systems
The Safety Case for a radioactive waste repository in deep geological formations requires detailed chemical and thermodynamic information on the stored radionuclides in their relevant oxidation states. Although a comprehensive summary of critically evaluated thermodynamic data is available via the blue book series of the NEA-TDB (“Nuclear Energy Agency – Thermochemical Database”), the majority of this data is limited to ambient conditions (Grenthe et al., 2020). In the case of the disposal of high-active, heat-producing waste, however, the near-field of the repository will experience increased temperatures at early operative phases for several hundred or a few thousand years. Radionuclides may come into contact with aquatic solutions or brines at elevated temperatures in the case of early canister failure. Besides other factors of the overall disposal concept (e.g. the geometry of the repository, type and amount of stored radionuclide inventories), host rock characteristics themselves limit the extent of the allowable temperature increase. For example, in clay formations the maximum temperature should stay at around or below in order to avoid an irreversible change in the host rock retention capacity, whereas rock salt allows much higher temperatures of up to 200 ∘C. Increased temperatures will have a distinct impact on the geochemical behaviour of radionuclides, potentially affecting their mobility and retention in the near field. Besides reactions at the solid–liquid interface (e.g. dissolution/precipitation reactions of the waste matrix, sorption reactions of the radionuclides to surfaces), complexation reactions with inorganic and organic ligands present in the aqueous phase potentially affect migration behaviour of the radionuclides. A quantitative thermodynamic description of these processes requires standard stability constants ( ), as well as standard reaction enthalpies and entropies ( , ). The precise experimental determination of these data for all relevant radionuclide/ligand reactions requires a vast amount of time and effort. In this regard, reliable extrapolation methods in particular for standard stability constants valid for 25 ∘C to higher temperatures are considered to support a comprehensive description. Recently, the German Federal Ministry of Education and Research (BMBF)-funded collaborative research project “Therm AC” focused on the experimental determination of new thermodynamic data at higher temperatures, as well as the comparison with the analogous results yielded by extrapolation methods. The Thermochemical Database Project of the OECD-NEA (NEA-TDB) is currently in the process of preparing a comprehensive state-of-the-art report on the high temperature thermodynamics of radionuclides, further emphasizing the particular relevance of this interesting topic. Within this contribution, a critical overview on the recent advances in the field of high temperature studies of radionuclides in aqueous solutions will be given. Besides summarizing information on key technical aspects relevant for high temperature studies, the effect of increased temperatures on the complexation of trivalent actinides with chloride will be discussed in more detail in order to illustrate newly derived in-depth understanding of the impact of increased temperatures on the (geo)chemical behaviour of trivalent actinides on the molecular scale (Skerencak-Frech et al., 2014). - 13 April 2020
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 59 (9) , 6067-6077
Thermodynamics and Structure of Neptunium(V) Complexes with Formate. Spectroscopic and Theoretical Study
The temperature and ionic strength dependences of the complex formation of NpO2+ with formate in aqueous solution are studied by absorption spectroscopy (Im = 0.5–4.0 mol kg–1, T = 20–85 °C, [Form–]total = 0–0.65 mol kg–1), extended X-ray absorption fine structure spectroscopy (EXAFS) and quantum chemical methods. The complex stoichiometry and the thermodynamic functions of the complexation reactions are determined by peak deconvolution of the absorption spectra and slope analyses. Besides the solvated NpO2+ ion, two NpO2+ formate species (NpO2(Form)n1-n; n = 1, 2) are identified. Application of the law of mass action yields the temperature dependent conditional stability constants log β′n(T) at a given ionic strength. These data are extrapolated to IUPAC reference state conditions (Im = 0) using the specific ion interaction theory (SIT). The results show, that log β01(20 °C) = 0.67 ± 0.04 decreases by approximately 0.1 logarithmic units with increasing temperature, log β02(20 °C) = 0.11 ± 0.11 increases by about 0.2 logarithmic units. The temperature dependence of the log β0n(T) values is modeled with the integrated Van’t Hoff equation yielding the standard reaction enthalpy ΔrH0 and entropy ΔrS0 of the complexation reactions. The results show that the formation of NpO2(Form) is exothermic (ΔrH01 = −2.8 ± 0.9 kJ mol–1) whereas the formation of NpO2(Form)2– is endothermic (ΔrH02 = 6.7 ± 4.1 kJ mol–1). Furthermore, the binary ion–ion interaction coefficients εT(i,k) of the formed complexes are determined in NaClO4 and NaCl media as a function of the temperature. The coordination mode of formate toward the metal ion is investigated by EXAFS spectroscopy and quantum chemical calculations. A coordination of the ligand via only one O atom of formate to the metal ion is identified.
- 13 April 2020
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 59 (9) , 6067-6077
Thermodynamics and Structure of Neptunium(V) Complexes with Formate. Spectroscopic and Theoretical Study
The temperature and ionic strength dependences of the complex formation of NpO2+ with formate in aqueous solution are studied by absorption spectroscopy (Im = 0.5–4.0 mol kg–1, T = 20–85 °C, [Form–]total = 0–0.65 mol kg–1), extended X-ray absorption fine structure spectroscopy (EXAFS) and quantum chemical methods. The complex stoichiometry and the thermodynamic functions of the complexation reactions are determined by peak deconvolution of the absorption spectra and slope analyses. Besides the solvated NpO2+ ion, two NpO2+ formate species (NpO2(Form)n1-n; n = 1, 2) are identified. Application of the law of mass action yields the temperature dependent conditional stability constants log β′n(T) at a given ionic strength. These data are extrapolated to IUPAC reference state conditions (Im = 0) using the specific ion interaction theory (SIT). The results show, that log β01(20 °C) = 0.67 ± 0.04 decreases by approximately 0.1 logarithmic units with increasing temperature, log β02(20 °C) = 0.11 ± 0.11 increases by about 0.2 logarithmic units. The temperature dependence of the log β0n(T) values is modeled with the integrated Van’t Hoff equation yielding the standard reaction enthalpy ΔrH0 and entropy ΔrS0 of the complexation reactions. The results show that the formation of NpO2(Form) is exothermic (ΔrH01 = −2.8 ± 0.9 kJ mol–1) whereas the formation of NpO2(Form)2– is endothermic (ΔrH02 = 6.7 ± 4.1 kJ mol–1). Furthermore, the binary ion–ion interaction coefficients εT(i,k) of the formed complexes are determined in NaClO4 and NaCl media as a function of the temperature. The coordination mode of formate toward the metal ion is investigated by EXAFS spectroscopy and quantum chemical calculations. A coordination of the ligand via only one O atom of formate to the metal ion is identified.
- Open Access
- 3 May 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (5) , 8167-8177
Interdisciplinary Round-Robin Test on Molecular Spectroscopy of the U(VI) Acetate System
A comprehensive molecular analysis of a simple aqueous complexing system—U(VI) acetate—selected to be independently investigated by various spectroscopic (vibrational, luminescence, X-ray absorption, and nuclear magnetic resonance spectroscopy) and quantum chemical methods was achieved by an international round-robin test (RRT). Twenty laboratories from six different countries with a focus on actinide or geochemical research participated and contributed to this scientific endeavor. The outcomes of this RRT were considered on two levels of complexity: first, within each technical discipline, conformities as well as discrepancies of the results and their sources were evaluated. The raw data from the different experimental approaches were found to be generally consistent. In particular, for complex setups such as accelerator-based X-ray absorption spectroscopy, the agreement between the raw data was high. By contrast, luminescence spectroscopic data turned out to be strongly related to the chosen acquisition parameters. Second, the potentials and limitations of coupling various spectroscopic and theoretical approaches for the comprehensive study of actinide molecular complexes were assessed. Previous spectroscopic data from the literature were revised and the benchmark data on the U(VI) acetate system provided an unambiguous molecular interpretation based on the correlation of spectroscopic and theoretical results. The multimethodologic approach and the conclusions drawn address not only important aspects of actinide spectroscopy but particularly general aspects of modern molecular analytical chemistry.
- 3 May 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (5) , 8167-8177
Open AccessInterdisciplinary Round-Robin Test on Molecular Spectroscopy of the U(VI) Acetate System
A comprehensive molecular analysis of a simple aqueous complexing system—U(VI) acetate—selected to be independently investigated by various spectroscopic (vibrational, luminescence, X-ray absorption, and nuclear magnetic resonance spectroscopy) and quantum chemical methods was achieved by an international round-robin test (RRT). Twenty laboratories from six different countries with a focus on actinide or geochemical research participated and contributed to this scientific endeavor. The outcomes of this RRT were considered on two levels of complexity: first, within each technical discipline, conformities as well as discrepancies of the results and their sources were evaluated. The raw data from the different experimental approaches were found to be generally consistent. In particular, for complex setups such as accelerator-based X-ray absorption spectroscopy, the agreement between the raw data was high. By contrast, luminescence spectroscopic data turned out to be strongly related to the chosen acquisition parameters. Second, the potentials and limitations of coupling various spectroscopic and theoretical approaches for the comprehensive study of actinide molecular complexes were assessed. Previous spectroscopic data from the literature were revised and the benchmark data on the U(VI) acetate system provided an unambiguous molecular interpretation based on the correlation of spectroscopic and theoretical results. The multimethodologic approach and the conclusions drawn address not only important aspects of actinide spectroscopy but particularly general aspects of modern molecular analytical chemistry.
- 18 August 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (17) , 10172-10180
Coordination and Thermodynamics of Trivalent Curium with Malonate at Increased Temperatures: A Spectroscopic and Quantum Chemical Study
The complexation of Cm(III) with malonate is studied by time-resolved laser fluorescence spectroscopy (TRLFS) in the temperature range from 25 to 90 °C. Three complexes ([Cm(Mal)n]3–2n, n = 1, 2, 3) are identified and their molar fractions are determined as a function of the ligand concentration, the ionic strength, and the temperature. A general shift of the chemical equilibrium toward higher complexes with increasing temperature is observed, with the [CmMal3]3– complex forming only at T > 40 °C. The conditional stability constants (log K′n(T)) are calculated and extrapolated to Im = 0 with the specific ion interaction theory (SIT). The log Kn0(T) values increase by 0.25 to 0.5 logarithmic unit in the studied temperature range. The temperature dependency of the log K°n(T) is fitted by the integrated Van’t Hoff equation, yielding the thermodynamic functions ΔrH°m and ΔrS°m. The results show positive reaction enthalpies and entropies for each complexation step. While the ΔrH°n values are constant within their error range, the ΔrS°n values decrease successively with each ligand added. To explain this effect, quantum chemical calculations of binding energies and bond lengths of the different Cm(III) malonate species are performed. The results show that malonate is capable of stabilizing its end-on coordination mode to some extent by forming hydrogen bonds to first-shell water molecules. As a result, an equilibrium between side-on and end-on coordinated malonate ligands is present, with the latter becoming more pronounced for the higher complexes due to steric reasons.
- 18 August 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (17) , 10172-10180
Coordination and Thermodynamics of Trivalent Curium with Malonate at Increased Temperatures: A Spectroscopic and Quantum Chemical Study
The complexation of Cm(III) with malonate is studied by time-resolved laser fluorescence spectroscopy (TRLFS) in the temperature range from 25 to 90 °C. Three complexes ([Cm(Mal)n]3–2n, n = 1, 2, 3) are identified and their molar fractions are determined as a function of the ligand concentration, the ionic strength, and the temperature. A general shift of the chemical equilibrium toward higher complexes with increasing temperature is observed, with the [CmMal3]3– complex forming only at T > 40 °C. The conditional stability constants (log K′n(T)) are calculated and extrapolated to Im = 0 with the specific ion interaction theory (SIT). The log Kn0(T) values increase by 0.25 to 0.5 logarithmic unit in the studied temperature range. The temperature dependency of the log K°n(T) is fitted by the integrated Van’t Hoff equation, yielding the thermodynamic functions ΔrH°m and ΔrS°m. The results show positive reaction enthalpies and entropies for each complexation step. While the ΔrH°n values are constant within their error range, the ΔrS°n values decrease successively with each ligand added. To explain this effect, quantum chemical calculations of binding energies and bond lengths of the different Cm(III) malonate species are performed. The results show that malonate is capable of stabilizing its end-on coordination mode to some extent by forming hydrogen bonds to first-shell water molecules. As a result, an equilibrium between side-on and end-on coordinated malonate ligands is present, with the latter becoming more pronounced for the higher complexes due to steric reasons.
- 14 November 2016
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 40 (12) , 10389-10397
2,6-Bis(5,6-diisopropyl-1,2,4-triazin-3-yl)pyridine: a highly selective N-donor ligand studied by TRLFS, liquid–liquid extraction and molecular dynamics
The complexation of Cm(III) and Eu(III) with 2,6-bis(5,6-di-i-propyl-1,2,4-triazin-3-yl)-pyridine (iPr-BTP) is studied in methanol : water (1 : 1, vol) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). With increasing ligand concentration [Cm(iPr-BTP)3]3+ and [Eu(iPr-BTP)3]3+ are formed, respectively. Stability constants of log β3′([Cm(iPr-BTP)3]3+) = 16.3 ± 0.3 and log β3′([Eu(iPr-BTP)3]3+) = 14.9 ± 0.3 are determined. Thermodynamic data of the complexation reactions is obtained in a temperature range of 20–60 °C. The complexation of iPr-BTP with both metal ions is exothermic (Cm(III): ΔrH3′ = −(64.1 ± 3.0) kJ mol−1; Eu(III): ΔrH3′ = −(42.6 ± 2.0) kJ mol−1). The reaction entropy for the formation of [Eu(iPr-BTP)3]3+ is higher compared to the Cm(III) complex (Cm(III): ΔrS3′ = (96.5 ± 6.5) J mol−1 K−1; Eu(III): ΔrS3′ = (136.0 ± 15.2) J mol−1 K−1). Different complexation entropies for the formation of [Cm(iPr-BTP)3] and [Cm(nPr-BTP)3] are explained by molecular dynamics simulations. Results from liquid–liquid extraction tests confirm the ligand's peculiar extraction kinetics observed in previous studies and link them to the thermodynamic data.
- 14 November 2016
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 40 (12) , 10389-10397
2,6-Bis(5,6-diisopropyl-1,2,4-triazin-3-yl)pyridine: a highly selective N-donor ligand studied by TRLFS, liquid–liquid extraction and molecular dynamics
The complexation of Cm(III) and Eu(III) with 2,6-bis(5,6-di-i-propyl-1,2,4-triazin-3-yl)-pyridine (iPr-BTP) is studied in methanol : water (1 : 1, vol) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). With increasing ligand concentration [Cm(iPr-BTP)3]3+ and [Eu(iPr-BTP)3]3+ are formed, respectively. Stability constants of log β3′([Cm(iPr-BTP)3]3+) = 16.3 ± 0.3 and log β3′([Eu(iPr-BTP)3]3+) = 14.9 ± 0.3 are determined. Thermodynamic data of the complexation reactions is obtained in a temperature range of 20–60 °C. The complexation of iPr-BTP with both metal ions is exothermic (Cm(III): ΔrH3′ = −(64.1 ± 3.0) kJ mol−1; Eu(III): ΔrH3′ = −(42.6 ± 2.0) kJ mol−1). The reaction entropy for the formation of [Eu(iPr-BTP)3]3+ is higher compared to the Cm(III) complex (Cm(III): ΔrS3′ = (96.5 ± 6.5) J mol−1 K−1; Eu(III): ΔrS3′ = (136.0 ± 15.2) J mol−1 K−1). Different complexation entropies for the formation of [Cm(iPr-BTP)3] and [Cm(nPr-BTP)3] are explained by molecular dynamics simulations. Results from liquid–liquid extraction tests confirm the ligand's peculiar extraction kinetics observed in previous studies and link them to the thermodynamic data.
- 3 February 2015
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 54 (4) , 1860-1868
The Complexation of Cm(III) with Oxalate in Aqueous Solution at T = 20–90 °C: A Combined TRLFS and Quantum Chemical Study
The complexation of Cm(III) with oxalate is studied in aqueous solution as a function of the ligand concentration, the ionic strength (NaCl), and the temperature (T = 20–90 °C) by time-resolved laser fluorescence spectroscopy (TRLFS) and quantum chemical calculations. Four complex species ([Cm(Ox)n]3–2n, n = 1, 2, 3, 4) are identified, and their molar fractions are determined by peak deconvolution of the emission spectra. The conditional log K′n(T) values of the first three complexes are calculated and extrapolated to zero ionic strength with the specific ion interaction theory approach. The [Cm(Ox)4]5– complex forms only at high temperatures. Thus, the log K40(T) value was determined at T > 60 °C. The log K10(25 °C) = 6.86 ± 0.02 decreases by 0.1 logarithmic units in the studied temperature range. The log K20(25 °C) = 4.68 ± 0.09 increases by 0.35, and log K30(25 °C) = 2.11 ± 0.05 increases by 0.37 orders of magnitude. The log Kn0(T) (n = 1, 2, 3) values are linearly correlated with the reciprocal temperature. Thus, their temperature dependencies are fitted with the linear Van’t Hoff equation yielding the standard reaction enthalpy (ΔrHm0) and standard reaction entropy (ΔrSm0) of the stepwise formation of the [Cm(Ox)n]3–2n species (n = 1, 2, 3). Furthermore, the binary ion–ion interaction coefficients of the four Cm(III) oxalate species with Cl–/Na+ are determined. The binding energies, bond lengths, and bond angles of the different Cm(III) oxalate complexes are calculated in the gas phase as well as in a box containing 1000 H2O molecules by ab inito calculations and molecular dynamics simulations, respectively.
- 3 February 2015
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 54 (4) , 1860-1868
The Complexation of Cm(III) with Oxalate in Aqueous Solution at T = 20–90 °C: A Combined TRLFS and Quantum Chemical Study
The complexation of Cm(III) with oxalate is studied in aqueous solution as a function of the ligand concentration, the ionic strength (NaCl), and the temperature (T = 20–90 °C) by time-resolved laser fluorescence spectroscopy (TRLFS) and quantum chemical calculations. Four complex species ([Cm(Ox)n]3–2n, n = 1, 2, 3, 4) are identified, and their molar fractions are determined by peak deconvolution of the emission spectra. The conditional log K′n(T) values of the first three complexes are calculated and extrapolated to zero ionic strength with the specific ion interaction theory approach. The [Cm(Ox)4]5– complex forms only at high temperatures. Thus, the log K40(T) value was determined at T > 60 °C. The log K10(25 °C) = 6.86 ± 0.02 decreases by 0.1 logarithmic units in the studied temperature range. The log K20(25 °C) = 4.68 ± 0.09 increases by 0.35, and log K30(25 °C) = 2.11 ± 0.05 increases by 0.37 orders of magnitude. The log Kn0(T) (n = 1, 2, 3) values are linearly correlated with the reciprocal temperature. Thus, their temperature dependencies are fitted with the linear Van’t Hoff equation yielding the standard reaction enthalpy (ΔrHm0) and standard reaction entropy (ΔrSm0) of the stepwise formation of the [Cm(Ox)n]3–2n species (n = 1, 2, 3). Furthermore, the binary ion–ion interaction coefficients of the four Cm(III) oxalate species with Cl–/Na+ are determined. The binding energies, bond lengths, and bond angles of the different Cm(III) oxalate complexes are calculated in the gas phase as well as in a box containing 1000 H2O molecules by ab inito calculations and molecular dynamics simulations, respectively.
- 2 January 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 53 (2) , 1062-1069
Combined Time-Resolved Laser Fluorescence Spectroscopy and Extended X-ray Absorption Fine Structure Spectroscopy Study on the Complexation of Trivalent Actinides with Chloride at T = 25–200 °C
The complexation of trivalent actinides (An(III)) with chloride is studied in the temperature range from 25 to 200 °C by spectroscopic methods. Time-resolved laser fluorescence spectroscopy (TRLFS) is applied to determine the thermodynamic data of Cm(III)–Cl– complexes, while extended X-ray absorption fine structure spectroscopy (EXAFS) is used to determine the structural data of the respective Am(III) complexes. The experiments are performed in a custom-built high-temperature cell which is modified for the respective spectroscopic technique. The TRLFS results show that at 25 °C the speciation is dominated mainly by the Cm3+ aquo ion. Only a minor fraction of the CmCl2+ complex is present in solution. As the temperature increases, the fraction of this species decreases further. Simultaneously, the fraction of the CmCl2+ complex increases strongly with the temperature. Also, the CmCl3 complex is formed to a minor extent at T > 160 °C. The conditional stability constant log β′2 is determined as a function of the temperature and extrapolated to zero ionic strength with the specific ion interaction theory approach. The log β°2(T) values increase by more than 3 orders of magnitude in the studied temperature range. The temperature dependency of log β°2 is fitted by the extended van’t Hoff equation to determine ΔrH°m, ΔrS°m, and ΔrC°p,m. The EXAFS results support these findings. The results confirm the absence of americium(III) chloride complexes at T = 25 and 90 °C ([Am(III)] = 10–3 m, [Cl–] = 3.0 m), and the spectra are described by 9–10 oxygen atoms at a distance of 2.44–2.48 Å. At T = 200 °C two chloride ligands are present in the inner coordination sphere of Am(III) at a distance of 2.78 Å.
- 2 January 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 53 (2) , 1062-1069
Combined Time-Resolved Laser Fluorescence Spectroscopy and Extended X-ray Absorption Fine Structure Spectroscopy Study on the Complexation of Trivalent Actinides with Chloride at T = 25–200 °C
The complexation of trivalent actinides (An(III)) with chloride is studied in the temperature range from 25 to 200 °C by spectroscopic methods. Time-resolved laser fluorescence spectroscopy (TRLFS) is applied to determine the thermodynamic data of Cm(III)–Cl– complexes, while extended X-ray absorption fine structure spectroscopy (EXAFS) is used to determine the structural data of the respective Am(III) complexes. The experiments are performed in a custom-built high-temperature cell which is modified for the respective spectroscopic technique. The TRLFS results show that at 25 °C the speciation is dominated mainly by the Cm3+ aquo ion. Only a minor fraction of the CmCl2+ complex is present in solution. As the temperature increases, the fraction of this species decreases further. Simultaneously, the fraction of the CmCl2+ complex increases strongly with the temperature. Also, the CmCl3 complex is formed to a minor extent at T > 160 °C. The conditional stability constant log β′2 is determined as a function of the temperature and extrapolated to zero ionic strength with the specific ion interaction theory approach. The log β°2(T) values increase by more than 3 orders of magnitude in the studied temperature range. The temperature dependency of log β°2 is fitted by the extended van’t Hoff equation to determine ΔrH°m, ΔrS°m, and ΔrC°p,m. The EXAFS results support these findings. The results confirm the absence of americium(III) chloride complexes at T = 25 and 90 °C ([Am(III)] = 10–3 m, [Cl–] = 3.0 m), and the spectra are described by 9–10 oxygen atoms at a distance of 2.44–2.48 Å. At T = 200 °C two chloride ligands are present in the inner coordination sphere of Am(III) at a distance of 2.78 Å.