TPTeresa Pamies

Teresa Pamies

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Teresa Pamies has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • LOW-COST DEVICE FOR FAULT DIAGNOSIS IN BEARINGS BASED ON THE HILBERT-HUANG TRANSFORM

    by Pablo Cifuentes Fiallos, Jordi Romeu Garbi, Teresa Pamies Gomez

    In order to monitor the condition of machinery complex industrial environments, high-cost equipment is required for signal acquisition and processing. However, low-cost sensor nodes with high processing capability are a potential solution to improve diagnostic systems. This paper presents a low-cost device for fault diagnosis based on the vibration response in rotating machines with the implementation of the Hilbert-Huang transform (HHT) analysis to extract the main characteristics of the signal. HHT, used to analyze non-linear and non-stationary signals, incorporates an Empirical Mode Decomposition (EMD) process. Processing is carried out in an embedded system to acquire vibration response data and extract signal characteristics that allow condition monitoring. As a result of local processing in the vibratory measurement device in an embedded system, it is achieved to decompose the signal in order to the characteristic failure in the bearing and transmit the alarm to a hub. This eliminates the need for a central diagnostic system and reduces the total cost of the system. Keywords: vibration detection; fault diagnosis; empirical mode decomposition (EMD); local processing, embedded systems.

  • Open Access

    Modified 2.5D singular boundary methods to deal with spurious eigensolutions in exterior acoustic problems

    by Javad Fakhraei, Robert Arcos, Teresa Pàmies, Hassan Liravi, Jordi Romeu


  • Active noise control for open windows

    by Shahin Sohrabi, Peter Svensson, Teresa Pàmies Gómez, Jordi Romeu Garbi

    Over the last decades, the applications of the active noise control system are broadened. In this study, the active noise control is modeled to reduce the noise pass through an open window. The objective is to define a suitable location for the control sources and error microphones to achieve more noise level reduction at the other side of the window. The performances of the active noise control system are calculated for two different arrangements: (1) the control sources on the edge of the opening and (2) the control sources distributed on the surface of the window. Furthermore, two cost functions are considered to model the noise control system including the minimization of the total squared pressure at cancellation points and the minimization of sound intensity at the surface of the aperture.

  • Open Access

    Suitability of Active Noise Barriers for Construction Sites

    by Shahin Sohrabi, Teresa Pàmies Gómez, Jordi Romeu Garbí

    Barriers are increasingly used to protect the pedestrian and neighboring buildings from construction noise activities. This study aims to investigate the suitability of applying active noise control on barriers in a construction site to protect the street area and neighboring buildings. Transducers that are simulated in this work are close to the barrier, and their optimal positions are defined in such a way that the control system has the maximum performance at the neighboring areas close to the construction sites. To begin with, the suitable location of the control sources is found when the total squared pressure is minimized at the positions of noise receivers. The suitable location of the error sensors is, then, found when the control sources are fixed at the position of the previous step and the total squared pressure is minimized at the error sensors. The best location for the error sensors is defined when the maximum reduction is achieved in the target area. It is observed that suitable positions for the transducers depend on the location of target areas for noise control, the position of the noise source, and its operating frequency. In this investigation, a unique configuration is proposed for the transducers that achieves a comparable reduction both at the street area and the neighboring buildings, simultaneously. The results show that the active noise barrier with a height of 2.5 m can achieve an extra insertion loss in the street zone, varies from 9.3 to 16.4 dB (in comparison with passive noise barrier) when the distance of the noise source from the barrier changes in the range of 7 to 1 m, respectively. Those values are of the same order for the passive noise attenuation. Furthermore, similar results are achieved when attempting to cancel the shadow zone of a façade 15 m away from the barrier.


  • Experimental and Numerical Assessment of Local Resonance Phenomena in 3D-Printed Acoustic Metamaterials

    by David Roca, Teresa Pamies, Juan Cante, O. Lloberas-Valls, Javier Oliver

    The so-called locally resonant acoustic metamaterials (LRAMs) are a new kind of artificially engineered materials capable of attenuating acoustic waves. As the name suggests, this phenomenon occurs in the vicinity of internal frequencies of the material structure and can give rise to acoustic bandgaps. One possible way to achieve this is by considering periodic arrangements of a certain topology (unit cell), smaller in size than the characteristic wavelength. In this context, a computational model based on a homogenization framework has been developed from which one can obtain the aforementioned resonance frequencies for a given LRAM unit cell design in the sub-wavelength regime, which is suitable for low-frequency applications. Aiming at validating both the proposed numerical model and the local resonance phenomena responsible for the attenuation capabilities of such materials, a 3D-printed prototype consisting of a plate with a well selected LRAM unit cell design has been built and its acoustic response to normal incident waves in the range between 500 and 2000 Hz has been tested in an impedance tube. The results demonstrate the attenuating capabilities of the proposed design in the targeted frequency range for normal incident sound pressure waves and also establish the proposed formulation as the fundamental base for the computational design of 3D-printed LRAM-based structures.


  • Open Access

    Numerical study of the aerodynamics of sound sources in a bass-reflex port

    by V.M. Garcia-Alcaide, S. Palleja-Cabre, R. Castilla, P. J. Gamez-Montero, J. Romeu, T. Pamies, J. Amate, N. Milan

    The aim of this paper is to study the aerodynamics phenomena of a bass-reflex port that causes noise in the audible frequency range. After discarding structural and mechanical vibration issues, the hypothesis considered is that vortex shedding is the source of the noise. Experimental and numerical evidences of the vortex, an analysis of its noise and the similarities between real and simulated performance are presented. The numerically simulated cases with the original geometry are excited at different frequencies and with modifications of the port geometry. Likewise, the internal performance of an enclosure with a closed port was simulated. The simulations have been performed with axisymmetrical geometries using the open-source OpenFOAM® toolbox. Moreover, experimental measurements were carried out. First, acoustic signal experiments were done to analyse the response of the bass-reflex ports. Secondly, a structure vibration measurement was conducted in order to exclude the cabinet structure vibration as a source of the noise in question. A good agreement was found between numerical and experimental results, especially in the frequency band of the detected noise, i.e. the 1000–1500 Hz range. Despite no remarkable improvement being made with the geometry changes explored, the presented CFD approach has proved a useful and cost-effective tool to address this kind of phenomenon.


  • On the use of a linear microphone array to measure wind turbine aerodynamic noise

    by M. Genescà, J. Romeu, T. Pàmies, J. Solé


  • Sound radiation from an aperture in a rectangular enclosure under low modal conditions

    by T. Pàmies, J. Romeu, M. Genescà, A. Balastegui

    This paper investigates both theoretically and experimentally the sound radiation from an aperture placed in an enclosure wall for the particular case of low modal sound field. The incidence field is composed of the enclosed sound field, which is calculated using the theoretical modal model presented. The transmitted sound is calculated by the Rayleigh radiation equation after continuity conditions have been applied in the aperture plane, assuming the condition of a thin wall. The model is experimentally validated by measuring the directivity and sound pressure radiated from an aperture in the side of a rectangular box. Because the walls of the enclosure are not rigid, an experimental procedure to determine its admittance is also presented. The experiments have been carried out for the first four modes of the enclosed sound field, and good agreement is found between the theoretical and experimental results. These results indicate that the admittance of the aperture, its radiation efficiency, and its directivity are all functions of the predominant mode shape, and the frequency, as well as the location and shape, of the aperture relative to the predominant enclosed mode shape.